Zanussi di720, DI 104B User Manual
Specifications and Main Features
- Appliance Model: DI720, DI104B, DI104W
- Width: 600mm (23.6 inches)
- Depth: 570mm (22.4 inches)
- Depth (with the Door Open): 1150mm (45.2 inches)
- Height: 820mm (32.2 inches)
- Rated Load: 12 IEC place settings
- Rated Supply Voltage: 220/240V, 50Hz
- Washing Motor Capacity: 200W
- Heating Element: 2570W
- Equipment Rated Source Capacity: 2770W
- Pressure of the Water Supply:
- Minimum: 49KN/sq.m. (7psi)
- Maximum: 758KN/sq.m. (110psi)
Frequently Asked Questions
Q: What should I do if the machine won't start?
A: The power cord, wall socket, and water tap should be checked to ensure they are correctly functioning.
You must verify that the door is secured properly and the programme selector knob is set to the correct position.
Q: Is it okay to wash every dishware item with a dishwasher?
A: Hand washing is the preferred method for items such as cutlery with wooden or horn handles, aluminum utensils, crystal glassware, and decorated or antique china unless manufacturer states that they can be washed in a dish washer.
Q: What is the procedure to find out if the salt container is out of salt and needs to be filled?
A: Salt refill indicator light lets you know whether salt is needed or not.
Q: My dishes have streaks on them when I take them out, what should I do?
A: First check if the salt and rinse aid are enough in their containers, also check whether the supplied quantity of rinse aid is enough or not.
Q: I have silver cutlery and stainless steel cutlery, can I wash them together in the dishwasher?
A: Yes, it is to be discouraged as a reaction happens between the silver cutlery and the stainless steel cutlery so these should always be cleaned on their own.
Q: What can I do to make my dishwasher perform better in drying?
A: If you are expecting an efficient drying cycle after washing on the Rinse and Hold programs then use the Economy Drying button, otherwise this may not work.
Q: What are some upkeep procedures that I should do on my dishwasher?
A: To prevent moisture collection, Always ensure that the filter and spray arm jet nozzles are thoroughly cleaned. One should ensure there only slight grease deposition on the rubber gaskets while also checking if the spray arms rotate without any obstructions once the dishes are loaded.
User Manual
Loading...