How it Works
Zanussi
Loading...
DE 4554 S
User Manual
20 pgs353.7 Kb0

Zanussi DE 4554, DE 4554 S User Manual

DISHWASHER
DE 4554
DE 4554 S
Instruction Book
152969 89/1
UK
2
Setting the water softener 5 Filling with salt 6 Rinse aid 6
Washing programmes 11 Starting a washing programme 12 Maintenance and cleaning 13
Cleaning the filters 13 Prolonged periods of non-operation 13 Frost precautions 13 Moving the machine 13
What to do, when... 14 Service and Spare Parts 16 Customer Care Department 16 Guarantee Conditions 16
Installation instructions 17
Fitting under a counter 17 Levelling 17 Water supply connections 17 Water outlet hose connection 17 Electrical connection 18
Hints for test centres 19
Contents
Dimensions Width 45 cm
Height with worktop 85 cm Height without worktop 82 cm Max depth 63 cm Max depth with open door 115.9 cm
Electrical connection: Information on the electrical connection is given on the rating plate on the Voltage inner edge of the dishwasher’s door. Overall power Fuse
Water supply pressure Minimum 50 kPa (0.5 bar)
Maximum 800 kPa (8 bar)
Capacity 9 place settings
Technical specifications
This appliance complies with the following E.E.C. Directives:
- 73/23 or 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 or 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
3
Installation
● Check your dishwasher for any transport damage. Never
connect a damaged machine. If your dishwasher is damaged, you should contact your supplier.
● For safety reasons it is dangerous to alter the specifications
or attempt to modify this product in any way.
● Any electrical and plumbing work required to install this
appliance should be carried out by a qualified and competent person.
● Care must be taken to ensure that the appliance does not
stand on the electrical supply cable.
● The sides of the dishwasher must never be drilled to
prevent damage to hydraulic components.
Child safety
● This appliance is designed to be operated by adults.
● Children should not be allowed to tamper with the controls
or play with the product.
● Packaging parts may be dangerous for children, who could
even be suffocated! You should therefore keep all packaging well away from children.
● The water in your dishwasher is not for drinking. Detergent
residues may still be present in your machine. Keep children well away from your dishwasher when the door is open.
● Keep all detergents in a safe place out of children's reach.
Your dishwasher in day-to-day use
● Items that are contaminated by petrol, paint, steel or iron
debris, corrosive, acidic or alkaline chemicals must not be washed in this dishwasher.
● Under no circumstances should you open the door whilst
the appliance is in operation, especially during the washing phase, hot water may escape. However, if the door is opened, a safety device ensures that the machine stops.
● Only use products (detergent, salt and rinse aid) specifically
designed for use in dishwashers.
● Long bladed knives stored in an upright position are a
potential hazard.
● Long and/or sharp items of cutlery such as carving knives
must be positioned horizontally in the upper basket.
● When finishing loading or unloading close the door, as an
open door can be a hazard.
● Do not sit or stand on the open door.
● Isolate the appliance from the power supply and turn off the
water supply after use.
● This product should be serviced by an authorised service
engineer, and only genuine spare parts should be used.
● Under no circumstances should you attempt to repair the
machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Force Centre. Always insist on genuine spare parts.
Disposal
Dispose of the dishwasher packaging material correctly. All packaging materials can be recycled.
Plastic parts are marked with standard international abbreviations:
>PE< for polyethylene, e.g. sheet wrapping material. >PS< for polystyrene, e.g. padding material (always CFC-
free).
>POM< for polyoxymethylene, e.g. plastic clips. Cardboard packaging is manufactured from recycled paper
and should be deposited in the waste paper collection for recycling.
As and when you cease to use your dishwasher and withdraw it from service, your should render it unserviceable before having it disposed of.
Warning! Children at play could lock themselves in your dishwasher or otherwise endanger their lives. Therefore cut off the power supply cable and make the door closing device unusable to prevent children from being trapped inside.
For the disposing of the appliance please take it to a recycling centre or to your dealer who will, for a small contribution to the costs, dispose it for you.
Economical and ecological dishwashing
● Ensure that the water softener is correctly adjusted.
● Do not pre-wash under running water.
● Select the wash programme to suit the nature and degree of
the soiling on the dishes.
● Do not use more detergent, special salt and rinse aid than is
recommended in these operating instructions and by the manufacturer of the respective product.
It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information.
This information has been provided in the interest of your safety. You MUST read it carefully before installing or using the appliance.
Safety instructions
The control panel
4
1. Levelling spacers
2. Upper basket stop
3. Upper spray arm
4. Salt container
5. Detergent dispenser
6. Control panel
7. Rinse aid dispenser
8. Filters
9. Lower spray arm
10. Upper basket
11. Worktop
Description of the appliance
Function push buttons: in addition to the dishwashing
programme selected, the following functions can also be set with the help of these buttons.
"Delay start" push button: this option allows the start
of the programme to be delayed by 3, 6 or 9 hours.
Indicator lights: have the following meanings:
The salt and rinse aid indicator lights are never illuminated while a washing programme is running even if filling with salt and rinse aid is necessary.
Phase indicator lights: have the following meanings:
As soon as you select a washing programme, the phase indicator lights for that programme will start flashing.
As the programme starts, the phase indicator lights turn off except for the indicator light of the phase in progress which will remain lit with a static light.
Function push button 1 Set water softener Function push button 2 Activate/deactivate rinse aid
indicator light
salt refilling indicator light, illuminates when the salt has run out
rinse aid refilling indicator light, illuminates when the rinse aid has run out
WASH illuminates when the washing phase is running DRY illuminates when the drying phase is running END illuminates when the washing programme has
ended
IN138
5
Before using your dishwasher for the first time:
1. Ensure that the electrical and water connections comply with the installation instructions.
2. Remove all packaging from inside the appliance.
3. Set the water softener.
4. Pour 1 litre of water inside the salt container and then fill
with salt.
5. Fill the rinse aid dispenser.
Setting the water softener
The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance.
The higher the content of these salts, the harder your water is. Water hardness is measured in equivalent scales, Clarke
degrees, French degrees and PPM (parts per Million). The softener should be adjusted according to the hardness of
the water in your area. Your local Water Authority can advise you on the hardness of the water in your area.
The water softener must be set in both ways: manually, using the water hardness switch and electronically, using the function push buttons on the control panel.
If your water is level 1 it is already soft and therefore there is no need to use salt. With the setting of the water softener at level 1 the salt indicator light on the control panel will always remain off.
To select a different level proceed as follows:
(The dishwasher must be switched off)
1. Press function push buttons 1 and 2 simultaneously.
2. While keeping the function push buttons 1 and 2 pressed
switch on the dishwasher by pressing the On/Off push button. The On/Off indicator light comes on. At the same time, the indicator lights of function push buttons 1 and 2 start flashing.
3. Press function push button 1, the indicator light of function push button 2 turns off, while the indicator light of function push button 1 remains fixed for about 5 seconds, after this it starts flashing indicating the current level of the water softener.
The current level is indicated by the number of flashes made by the indicator light of function push button 1, that alternates 5 seconds off with a number of flashes, this for about 60 seconds.
Example:
1 flash = level 1 2 flashes = level 2 3 flashes = level 3 4 flashes = level 4 5 flashes = level 5
4. To change the level, press function push button 1. Each time the push button is pressed the level changes.
Examples:
if the current level is 3, by pressing function push button 1 once, level 4 is selected. if the current level is 5, by pressing function push button 1 once, level 1 is selected.
The indicator light of function push button 1 remains off for about 5 seconds after which it starts flashing indicating the new level selected.
5. To memorise the new level, switch off the dishwasher by pressing the On/Off push button.
Prior to using for the first time
PPM
(parts per
million)
French
degrees
(°TH)
Clarke
degrees
50 - 63 36 - 49 22 - 35
6 - 21
< 6
71 - 90 51 - 70 31 - 50
8 - 30
< 8
701 - 900 501 - 700 301 - 500
80 - 300
< 80
5 4 3 2 1
yes yes yes yes
no
Water hardness
Use of
salt
Level
6
Filling with salt
Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes. This will prevent any grains of salt or salty water, which may have been spilt, remaining on the bottom of the machine for any period of time, which may cause corrosion.
To fill:
1. Open the door, remove the lower basket and unscrew the
cap of the salt container.
2. Pour 1 litre of water inside the container (this is necessary
only before filling with salt for the first time).
3. Using the funnel provided,
pour in the salt until the container is full.
4. Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket.
5. Screw on the cap tightly.
The salt container will require topping up periodically. You are reminded of this by the salt indicator light on the control panel which comes on when the salt has finished.
The salt indicator light on the control panel can remain illuminated for 2-6 hours after the salt has been replenished, assuming the dishwasher remains switched on. If you are using salts that take longer to dissolve then this can take longer. The function of the machine is not affected.
Do not worry if water over flows from the unit when filling with salt, this is quite normal.
Rinse aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying.
The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting.
Filling with rinse aid
1. Open the container by turning the lid (A) anticlockwise.
2. Add the rinse aid until the container is completely full. The
maximum level for filling is indicated by "max".
Ensure that the lid is closed after every refill.
Adjusting the dose
According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (C) (position 1 minimum dosage, position 6 maximum dosage).
Increase the dose if there are drops of water or lime spots on the dishes after washing.
Reduce it if there are sticky whitish streaks on the dishes.
Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash.
Only use branded rinse aid for dishwashers. Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance.
SR14
SALE
ZOUT
SALT
SALZ
SEL
BR01
BR13
BR02
Loading...
+ 14 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use