Zanussi DA 6141 D User Manual

DISHWASHER

DA 6141 D

Instruction book

152969 74/0

UK

The control panel

2

1. Upper basket stop

2. Water hardness switch

3. Salt container

4. Detergent dispenser (type A/ type B)

5. Control panel

6. Rating plate

7. Rinse aid dispenser (type A/ type B)

8. Filters

9. Lower spray arm

10. Upper spray arm

11. Upper basket

12. Worktop

Description of the appliance

IN148

3

● Check if it’s necessary to refill with special salt or rinse aid

● Load cutlery and dishes into the dishwasher.

● Fill with dishwasher detergent .

● Select a wash programme suitable for the cutlery and

dishes.

● Start the wash programme.

Loading cutlery and dishes

Sponges, household cloths and any object that can
absorb water may not be washed in the dishwasher.

● Before loading the dishes, you should:

- Remove large left-overs.

- Soften remnants of burnt food in pans

● When loading the dishes and cutlery, please note:

- Dishes and cutlery must not impede the rotation of the
spray arms .

- Load hollow items such as cups, glasses, pans, etc. with
the opening downwards so that water cannot collect in the
container or a deep base.

- Dishes and items of cutlery must not lie inside one
another, or cover each other.

- To avoid damage to glasses, they must not touch.

- Lay small objects in the cutlery basket.

Open the door and slide out the baskets to load the dishes.

The lower basket

The lower basket is designed to take saucepans, lids, plates,
salad bowls, cutlery etc.

Serving dishes and large lids should be arranged around the
edge of the basket, ensuring that the upper spray arm can turn
freely.

In daily use

For washing in the dishwasher the following cutlery/dishes

are of limited suitability:

- Only wash stoneware in the dishwasher if it is specifically
marked as being dishwasher-safe by the manufacturer.

- Glazed patterns may fade if machine washed frequently

- Silver and aluminium parts have a tendency to discolour
during washing. Left-overs, e.g. egg white, egg yolk and
mustard often cause discolouring and staining on silver.
Therefore always clean left-overs from silver immediately, if
it is not to be washed straight after use.

- Some types of glass can become dull after a large number
of washes

are not suitable:

- Cutlery with wooden, horn, china or
mother-of-pearl handles

- Plastic items that are not heat resistant

- Older cutlery with glued parts that is not
temperature resistant

- Bonded cutlery items or dishes

- Pewter or copper items

- Lead crystal glass

- Steel items subject to rusting

- Wooden platters

- Items made from synthetic fibres

UI48

UI21

4

The cutlery basket

Long bladed knives stored in an upright position are a
potential hazard.
Long and/or sharp items of cutlery such as carving knives
must be positioned horizontally in the upper basket.
Take care when loading or unloading sharp items such as
knives.

Cutlery should be placed in the removable cutlery basket with
the handles facing downwards. If the handles protrude from
the bottom of the basket, obstructing the lower spray arm, load
the cutlery with the handles facing upwards.

Mix spoons with other cutlery to prevent them from sticking
together.

For best results we
recommend you to use the
cutlery grids provided (if the
size and dimensions of the
cutlery allow it).

The cutlery basket is in two
parts which can be
separated to give greater
loading flexibility. To separate
the two parts, slide them
horizontally in opposite
directions and pull them
apart. To reassemble,
reverse the procedure.

The upper basket

The upper basket is designed for plates (dessert plates,
saucers, dinner plates of up to 25 cm in diameter), salad
bowls, cups and glasses.

Arrange items on and
underneath the cup racks so
that water can reach all
surfaces.

Glasses with long stems can
be placed upside down in the
cup racks.

Light items (plastic bowls
etc.) must be loaded in the
upper basket and arranged
so they do not move.

In case that plates are loaded in the upper
basket:

load them starting from the
rear positions of the basket;
tilting them slightly forwards
and avoiding the front
positions near the door.

Before closing the door, ensure that the spray arms can
rotate freely.

Adjusting the height of the upper basket

If washing very large plates you can load them in the lower
basket after moving the upper basket to the higher position.

To move to the higher position proceed as
follows:

1. Move the front runner stops (A) of the upper basket

outwards and slide the basket out.

2. Refit the basket in the higher position and replace the stops
(A) in their original position.

After loading your machine always close the door, as an
open door can be a hazard.

With upper basket raised 20 cm 31 cm
With upper basket lowered 25 cm 27 cm

Maximum height of the dishes in

upper basket lower basket

UI63

RC01

UI62

US64

US71

5

Washing programmes

(1) Testing programme for EN 50242 (see "Hints for Test Centres).

(2) Ideal for washing crockery and cutlery of breakfast and dinner (fresh soil).

Characterised by a short duration.
This is the perfect daily programme, made to meet the needs of a family of 4 persons who only wish to load breakfast
and dinner crockery and cutlery.

(3) The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by

the variations of the power supply.

Starting position

of the

programme

selector dial

Type of load

and

degree of soil

Heavy soil.
Crockery, cutlery,
pots and pans

Normal soil.
Crockery and cutlery

Fresh soil.
Crockery and cutlery

Any.
Partial load (to be
completed later in
the day).

Programme

(1) 65°c

INTENSIVE

65°c

NORMAL

(2) 65°c

QUICK

RINSE HOLD

Cycle
description

(3) Consumption values

Cold prewash
Main wash up to 65°C
1 cold rinse
1 hot rinse
Drying

Main wash up to 65°C
1 cold rinse
1 hot rinse
Drying

Main wash up to 65°C
1 hot rinse

1 cold rinse (to avoid
food scraps from
sticking together).

Programme

duration

(in minutes)

Energy

consumption

(in kWh)

Water

consumption

(litres)

110 - 120 1,15 - 1,24 16 - 18

95 - 105 1,15 - 1,24 13 - 15

30 - 40 1,05 - 1,15 11 - 13

12 0,1 10

A

B

C

D

BRILLIANTRILLIANT

FOR A

SHINE

RINSE

CONCENTRATED DISHWASHER DETERGENT

A

CTIO

N

N

E

W

DOUBLE

LIQUID GEL

POWDER

EASY

POURING

PACK

For best results we recommend the use of Finish detergents, rinse aid and salt.

DE15

6

1. Check that the baskets have been
loaded correctly and that the spray
arms can rotate freely

2. Turn on the water tap

3. Close the dishwasher door

4. Setting and starting the programme

Turn the programme selector dial clockwise until the
letter of the programme you wish to select corresponds
with the programme marker on the control panel (see
"Washing programmes" chart).

Depress the On/Off push button; the On/Off indicator
light will come on and the machine will start.

5. Interrupting a washing programme

Interrupt a washing programme in progress ONLY if
it’s absolutely necessary

To interrupt a washing programme

Attention! Hot steam may escape when the door is

opened. There is risk of scalding. Open the door
carefully.

● Open the dishwasher door; the programme will stop.

Close the door; the programme will start from the
point in which it was interrupted.

● Pressing the On/Off (in this case the On/Off indicator

light turns off). Press the On/Off push button again;
the programme will start from the point in which it was
interrupted.

6. End of the washing programme

The dishwasher will automatically stop.
Switch off the dishwasher by pressing the On/Off push

button, the On/Off indicator light turns off.
Hot steam may escape from the appliance when opening

the door immediately after the end of the programme,
therefore, open the door carefully.

Unloading the dishwasher

Hot dishes are sensitive to knocks. The dishes should
therefore be allowed to cool down before removing from
the appliance.

Leave the dishes in the dishwasher for approx. 15
minutes, with the door ajar, after the end of programme
so that they dry better and will be cooler.

Empty the lower basket first and then the upper one; this
will avoid water dripping from the upper basket onto the
dishes in the lower one.

When the washing programme has finished, it is
recommended that the dishwasher is unplugged and the
water tap turned off.

Starting a washing programme

7

Fitting under a counter

(kitchen worktop or sink)
By removing the machine’s worktop, you can install it under a

close fitting sink unit or a pre-existing top, providing the
dimensions of the recess correspond to those shown in the
picture.

Proceed as follows:

Remove the machine’s worktop by unscrewing the two rear
retaining screws, pull from the front and slide out the rear
slots, lifting the worktop.

Insert the machine after adjusting height and levelling with the
adjustable feet. When inserting the machine, ensure that the
water inlet and drain hoses are not kinked or squashed.

If the dishwasher is later used as a free-standing appliance,
the original worktop must be re-mounted.

The plinth on free-standing appliances is not adjustable.

Levelling

Good levelling is essential for correct closure and sealing of
the door.

When the appliance is correctly levelled, the door will not catch
on either side of the cabinet.

If the door does not close correctly, loosen or tighten the
adjustable feet until the machine is perfectly level.

Dimensions Width 60 cm

Height with worktop 85 cm
Height without worktop 82 cm
Max depth 63.5 cm

Electrical connection: Information on the electrical connection is given on the rating plate on the
Voltage inner edge of the dishwasher’s door on the right.
Overall power
Fuse

Water supply connection: cold water
Water supply pressure: Maximum 50 kPa (0.5 bar)

Maximum 800 kPa (8 bar)

Capacity 12 place settings

Technical specifications

This appliance complies with the following E.E.C. Directives:

- 73/23 or 19.2.73 (Low Voltage Directive) and subsequent modifications;

- 89/336 or 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.

570 - 600

820

600

IN05

8

Service and Spare Parts

In the event of your appliance requiring service, or if you wish
to purchase spare parts please contact your local Service
Force Centre by telephoning:

08705 929929

Your telephone call will be automatically routed to the Service
Force centre covering your post code area.

For the address of your local Service Force Centre and further
information about Service Force, please visit the website at

www

.serviceforce.co.uk

Before calling out an engineer, please ensure you read the
details under the heading Something not working.

When you contact the Service Force Centre you will need to
give the following details:

1. Your name, address and post code

2. Your telephone number

3. Clear and concise details of the fault

4. The model and serial number (found on the rating plate)

5. The purchase date

Please note that a valid purchase receipt or guarantee
documentation is required for in-guarantee service calls.

Customer Care
Department

For general enquiries concerning your Zanussi appliance or for
further information on Zanussi products please contact our
Customer Care Department by letter or telephone at the
address below or visit our website at www

.zanussi.co.uk

Customer Care Department
Zanussi
55-77 High Street
Slough
Berkshire
SL1 1DZ
Tel: [phone] (

*

)

*

calls to this number may be recorded for training purposes

Guarantee Conditions

Standard guarantee conditions

We, Zanussi, undertake that if within 12 months of the date of
purchase this Zanussi appliance or any part thereof is proved
to be defective by reason only of faulty workmanship or
materials, we will, at our option repair or replace the same
FREE OF CHARGE for labour, materials or carriage on
condition that:

● The appliance has been correctly installed and used only on

the electricity supply stated on the rating plate.

● The appliance has been used for normal domestic purposes

only, and in accordance with the manufacturer’s instructions.

● The appliance has not been serviced, maintained repaired,

taken apart or tampered with by any person not authorised
by us.

● All service work under this guarantee must be undertaken by

a Zanussi Service Force Centre.

● Any appliance or defective part replaced shall become the

Company’s property.

● This guarantee is in addition to your statutory and other legal

rights.

Home visits are made between 8.30am and 5.30pm Monday
to Friday. Visits may be available outside these hours in which
case a premium will be charged.

Exclusions

This guarantee does not cover:

● Damage or calls resulting from transportation, improper use

or neglect, the replacement of any light bulbs or removable
parts of glass or plastic.

● Costs incurred for calls to put right an appliance which is

improperly installed or calls to appliances outside the United
Kingdom.

● Appliances found to be in use within a commercial

environment, plus those which are subject to rental
agreements.

● Products of Zanussi manufacture which are not marketed by

Zanussi.

European Guarantee

If you should move to another country within Europe then your
guarantee moves with you to your new home subject to the
following qualifications:

● The guarantee starts from the date you first purchased your

product.

● The guarantee is for the same period and to the same extent

for labour and parts as exists in the new country of use for
this brand or range of products.

● This guarantee relates to you and cannot be transferred to

another user.

● Your new home is within the European Community (EC) or

European free Trade Area.

● The product is installed and used in accordance with our

instructions and is only used domestically, i.e. a normal
household.

● The product is installed taking into account regulations in

your new country.

Before you move please contact your nearest Customer Care
centre, listed below, to give them details of your new home.
They will then ensure that the local service Organisation is
aware of your move and able to look after you and your
appliances.

France Senlis [phone]
Germany Nurnberg [phone]
Italy Pordenone [phone]
Sweden Stockholm [phone]
UK Slough [phone]
Ireland Dublin [phone]