Zanussi bms949, zbm974 USER MANUAL
BUILT-IN OVENS
BMS 949
ZBM 974
35675-8402 02/02
INSTRUCTION BOOKLET
IL
ENGLISH
Important Safety Information
These warnings are provided in the interest of safety. You MUST read them carefully before installing or using the
appliance.
Installation
It is mandatory that all operations required for the
installation are carried out by a qualified or competent
person, in accordance with existing rules and
regulations.
It is dangerous to alter the specification in any way.
Once you removed all packaging from the appliance,
ensure that it is not damaged and the electric cable is
in perfect conditions. Otherwise, contact your dealer
before proceeding with the installation.
During use
This appliance has been designed for cooking edible
foodstuff only and MUST NOT be used for any other
purposes.
Ensure that all control knobs are in the OFF position
when not in use.
Should you connect any electrical tool to a plug near
this cooking appliance, ensure that electric cables are
not in contact with it and keep them far enough from
the heated parts of this appliance.
If the appliance is out of order, disconnect it from the
electric supply.
Do not leave untensils containing foodstuffs, e. g. fat
or oil in or on the appliance. This could cause damage
in case the appliance is inadvertently switched on.
Always place the dripping pan in position to collect fat
when using the grill or when cooking meat. Pour a little
water into the dripping pan to avoid smoke and
unpleasant smells.
Always use oven gloves to remove pans from the oven.
For hygiene and safety reasons, this appliance should
be kept clean at all times. A build-up of fats or other
foodstuff could result in a fire.
Disconnect the appliance from the electrical supply,
before carrying out any cleaning or manteinance work.
Some parts of the appliance are covered by a shock-
proof plastic film. Remove this film before using the
oven.
The manufacturer disclaims any responsability
should all the safety measures not be carried out.
Service
Under no circumstances should you attempt to repair
the appliance yourself. Repairs carried out by
unexperienced persons may cause injury or serious
malfunctioning. Refer to your local Service Centre.
Always insist on genuine spare parts.
Environmental Information
After installation, please dispose of the packaging
with due regard to safety and the environment.
When disposing of an old appliance, make it
unusable, by cutting off the cable.
It is most important that this instruction
book is retained with the appliance for
future reference. Should the appliance
be sold or transferred, always ensure
that the book is left with the appliance in
order that the new owner can get to know
the functions of the appliance and the
relevant warnings.
Guide to Use the instructions
The following symbols will be found in the text to
guide you throughout the Instructions:
Safety Instructions
Step by step instructions for an operation
F
Hints and Tips
Environmental information
Child Safety
This appliance has been designed to be operated by
adults and children under supervision. Young children
MUST NOT be allowed to tamper with the controls or play
near or with the oven.
Accessible parts of this appliance may become hot
when it is in use. Children should be KEPT AWAY until it
has cooled.
2
MANUFACTURER: ELECTROLUX ZANUSSI S.p.A.
Viale Bologna, 298
47100 FORLÌ (Italy)
Contents
For the User
Important Safety Information 2
Control Panel 3
When the oven is first installed 5
Programming the oven 6
Extra-features 7
Hints and Tips 8
Using the Oven 8
Hints and Tips on baking 8
Cooking Tables 9
Cleaning and Maintenance 11
What happens if something goes wrong 13
Technical Assistance and Spare Parts 13
Control Panel
For the Installer
Technical Data 14
Installation 14
COOKING FUNCTION TIME DISPLAY
}
123 456789
1. ON / OFF
2. Oven Function Control
3. Fast Heat Up Function / Defrosting
4. Current/setting temperature / Time of day
5. Decreasing Control (Time or Temperature)
6. Increasing Control (Time or Temperature)
7. Minute Minder
8. Cooking Time
9. End of Cooking Time
TEMPERATURE
DISPLAY
}
PROGRAMMING CONTROLS
NOTE
In the event of a power failure, the programmer will keep
all the settings (time of day, program setting or program
in operation) for about 3 minutes. If power misses for a
longer time, all the settings will be cancelled. When the
power is restored, the numbers on the display will flash,
and the clock/timer has to be reset.
3
How to select a cooking function
Set the oven on by pressing button 1
Press button 2 to select the required oven function.
Each time button 2 is depressed, a pilot light will
come on to the left of the currently selected function
symbol. Here below is a list of the function symbols
and their meaning.
Fan cooking - This setting allows you to roast or roast
and bake simoultaneously using any shelf, without flavour
transference.
Conventional cooking - The heat comes from both the
top and bottom element, ensuring even heating inside the
oven.
Double Grill - The full grill element will be on.
Recommended for large meat dishes.
Pizza Oven - The bottom element provides direct heat
to the base of pizzas, quiches or pies, while the fan ensure
air is circulated to cook the pizza toppings or pie fillings.
Thermal Grilling - This function offers an alternative
method of cooking food items, normally associated with
conventional grilling. The grill element and the oven fan
operate together, circulating hot air around the food.
Select a maximum temperature of 200°C.
Baking Function - The top and bottom elements
heat the oven cavity and the fan circulates hot air
around your dishes. Best for baking cakes, biscuits
or bread.
Bottom heating element - The heat comes from
the bottom of the oven only, to allow you finish your
dishes.
Inner grill element only - can be used for grilling
small quantities.
How to select a temperature
Every time you select a cooking function, a pre-set
temperature is displayed on the control panel. You can
adjust the temperature value at any time of cooking.
Press button 5 or 6 to adjust the temperature.
You can also get the current internal temperature by
pressing button 4.
How to switch off the oven
It is possible to switch off the oven at any time.
Press button 1 once. All pilot lights will come off.
"Fast Heat Up" function
After a cooking function has been selected and the
temperature has been adjusted, the cavity will gradually
heat up until the selected temperature is reached. This
will take from 10 to 15 minutes, depending on selected
function and temperature.
If it is necessary to reach the required temperature in a
shorter time, the "Fast Heat Up" Function can be used.
Switch the oven on by pressing button 1.
Set the required cooking function and temperature as
explained in the previous pages.
Press button once. The temperature display will
show "FHU".
When the required temperature is reached, an acoustic
alarm will sound for a short time, and the temperature
display will revert to the set temperature.
This function can be used with any cooking function or
temperature.
4
Defrosting Function
It is possible for the oven fan to operate without heat and
circulate the air, at low temperature, inside the oven. This
increases the speed of defrosting.
Switch the oven on by pressing button 1.
Press button twice. The temperature display will
show "32". This temperature setting cannot be
changed.
To switch the "defrost" function off, just press button
once again.
This function is particularly suitable for defrosting delicate
food which could be damaged by heat, e.g. cream filled
gateaux, iced cakes, pastries, bread and other yeast
products.
When the oven is first installed
Once the oven has been installed :
the numbers on the display will flash and indicate
"12.00". If no button is pressed in 10 seconds, the
numbers will stop flashing and the clock will start
running from 12.00.
To set the correct time of day :
if numbers are flashing, press button 5 or 6. When the
correct time is displayed, confirm the setting by
pressing button 4. The clock will start running.
if numbers are static, press button 8 and 9 at the same
time and keep them pressed until the numbers start
flashing. Then proceed as described above.
Then, select the conventional cooking function ( ):
press button 1 to switch on the oven.
press button 2 twice. The pilot light to the left of symbol
will come on.
Allow the oven to run empty for approximately 45
minutes.
open a window for ventilation.
During this time, an unpleasant odour may be emitted.
This is absolutely normal, and is caused by residues of
manufacturing.
Once this operation is carried out, let the oven cool down,
then clean the oven cavity with a soft cloth soaked in warm
soapy water.
Before cooking for the first time, carefully wash the
shelf and the dripping pan.
To open the oven door, always catch the
handle in its central part (Fig. 1).
Fig. 1
FO 0799
5
Loading...