Zanussi 110048, BCFW101 User Manual

RANGE
COMPOSITION

Chilling means bringing the temperature of
cooked food from +90ºC to +3°C in a short
time lap to minimize bacteria proliferation and
avoid loss of food consistency and texture.
The ZANUSSI easyChill Blast
Chillers/Freezers reduce temperature to
+3°C at food core in less than 90 minutes
and down to -18°C in less than four hours.
After the Blast Chilling a holding cycle starts
automatically to respectively maintain food at
+3°C and -18°C. Blast freezed food has a
solid 6 months/1 year shelf life without loss of
flavour, nutritional values and weight. The
opportunity to prepare in a single shot the
food to be used in different times during the
week enables a better work scheduling and
therefore a sensible reduction in labour costs.

BLAST CHILLER/FREEZERS 50kg - 10 1/1 GN

FUNCTIONAL AND
CONSTRUCTION
FEATURES

� Cruise cycle : the chiller

automatically drives the chilling
process to maintain the food quality
and reduce where possible the total
chilling time (it works by food probe).

� Soft Chilling (Air temperature

–2°C).

� Hard Chilling (Air temperature

–20°C).

� All the probe-driven cycles feature

ARTE (Algorithm for Remaining
Time Estimation) : the machine
displays the actual time needed to
end the cycle and to make planning
the activities easier.

� Holding at +3°C (automatically

activated at the end of each cycle).

� Turbo cooling: the chiller works

continuously at the desired
temperature. Ideal for continuous
production and for pastry application.

� Automatic recognition of the

insertion of the food probe (cycles
piloted either by food probe

ZANUSSI easyChill

temperature or by time)

� The control unit provides several

operating settings: time/core
temperature according to NF and UK
regulations, time/air
temperature/probe personalised
according to national regulations,
sterilizing cycle: UV lamps built-in
(on request), 3 single sensor core
temperature probes (as accessory),
ideal for meats, automatic defrosting
and manual defrosting. All
parameters are programmable.

� 3-sensor core probe as standard.
� The control unit provides two large

displays to read out: time, core
temperature, residual time, alarms,
service information.

� Two customizable cycles for each

operating modes, allowing setting
time and air temperature. These two
programs (P1-P2) can be converted
into ice-cream specialist cycles
(shape maintenance and holding).

� All information related to the

different operating models are
recorded: date, time, cycle, core
temperature, holding temperature,

ZANUSSI

P R O F E S S I O N A L

HACCP accordance.

TECHNICAL DATA
CHARACTERISTICS MODELS

Type Blast freezer - 50

Productivity per cycle - kg.
NF Regulations - chilling / freezing 36, 36
UK Guide lines - chilling / freezing 50, 50
Gross capacity (D.I.N. 8952) - l. 560
Cooling unit Built-In
Thermostat Electronic
Thermometers Digital
External dimensions - mm
width 895
depth/with open doors 840, 1379
height 1730
Door hinges Left
Trays type GN 1/1; 600x400
Max load capacity - trays h 65 mm - n° 10
Compressor power - HP 2.9
N° defrost in 24 hrs. 6
Refrigerant type R404a
Refrigerant quantity - g. 4500
Refrigeration power - W 2540
Refrigerant power
at evaporation temperature - °C -30
Power - kW
installed-electric 4.256
Power supply - V, phases, Hz 400 V, 3N, 50

INCLUDED ACCESSORIES

3-SENSOR PROBE FOR
CHILLER+C/FREEZER

BCFW101

110048

kg

1

BLAST CHILLER/FREEZERS 50kg - 10 1/1 GN

ZANUSSI easyChill

� An audible alarm starts when the

cycle ends or terminates abnormally.

� Chilling and freezing times can

vary according to food quantity,
density, moisture contents and type
of containers.

� Internal and external finishing in

304 AISI stainless steel and
backpanel in galvanized steel.

� HCFC, CFC and HFC free

insulation (Cyclopentane), HCFC
and CFC free refrigerant gas
(R404a).

� Developed and produced in ISO

9001 and ISO 14001 certified
factory.

� Inner cell with rounded corners.

� Door equipped with removable

magnetic gasket with hygienic
design.

� Evaporator with antirust

protection.

� Ventilator swinging panel foreasy

access to the evaporator.

� Automatic heated door frame.
� Hot gas defrosting system.
� Thermostatic expansion valve to

optimize the cooling unit efficiency.

� Adjustable feet 150 mm high.
� Stand alone printer as accessory.
� PC connection as accessory, gate

RS 485.

� No water connections required:

Waste water can be plumbed into
drain, but can also be collected in an
optional waste container.

*NF HYGIENE ALIMENTAIRE
certifying authority : AFAQ AFNOR
CERTIFICATION. Adress:11, Avenue Francis de
Pressense - 93571 Saint-Denis La Plaine Cedex

- France. Conformity with regulation NF031.
Certified guarantees: fitness for cleaning, thermal
performance.

OPTIONAL ACCESSORIES
ACCESSORIES MODELS

1 SINGLE SENSOR PROBE CHILLER+C/FREEZER 880089
2 SINGLE SENSOR PROBES CHILLER+C/FREEZER 880096
BANQUET RACK-30PLATES-65MM PITCH-10GN1/1 922015
KIT 3 SINGLE SENSOR PROBES FOR BC/BCF 880269
KIT 4 WHEELS FOR BLAST C/FREEZERS 880111
KIT HACCP ADVANCED CONNECT. BC/BCF LW+CW 880183
KIT HACCP EKIS 922166
PAIR OF 1/1 GN AISI 304 S/S GRIDS 921101
PASTRY(400X600)RACK+WHEELS-80MM,10 1/1LW 922066
RILSAN COATED GRID 881061
SLIDE-IN RACK SUPP.10 1/1 BC+BCF 50KG-LW 881028
TRAY RACK FOR BC+BCF LW 50KG 10 GN1/1 881007
TRAY RACK+WHEELS 10X1/1GN, 65MM PITCH 922006
TRAY RACK+WHEELS 8X1/1GN, 80MM PITCH 922009
TROLLEY FOR SLIDE-IN RACK 6&10X1/1GN 922004

DCBB2 2009-07-03 The Company reserves the right to alter technical specifications without prior notice.

BCFW101

110048

ZANUSSI

P R O F E S S I O N A L

www.zanussiprofessional.com