RANGE
COMPOSITION
A range of hoods supplementing the
‘inductive emission’ principle and
automatic filter washing.
Untreated air is introduced inside to
partly compensate for that removed.
This results in better drawing of
fumes towards the filter surface and
reduced air-treatment costs. The
inside filters have water sprayer
nozzles controlled by the special
panel which controls washing
functions. The range consists of
hoods with 5 different lengths (2400,
2800, 3200, 3600 and 4000 mm)
and 3000 mm deep.
640257
SUPERTREDILWASH - SW line - 3000mm
304 AISI CENTRAL MODULAR HOODS
FUNCTIONAL AND
CONSTRUCTION
FEATURES
� Constructed entirely in 304 AISI
stainless steel.
� Constructed as 2 separate wall
units to join on site back to back.
� Compensated flow exhaust
system (air inlet from outdoors).
TECHNICAL DATA
CHARACTERISTICS MODELS
External dimensions - mm
width 2400 2800 3200 3600 4000
depth 3000 3000 3000 3000 3000
height 500 500 500 500 500
Air Capacity - mc/h 9100 10600 12100 13700 15200
Power - kW
installed-electric 0.32 0.48 0.48 0.64 0.64
Net weight - kg. 320 362 406 450 492
Supply voltage 220 V, 1N, 50/60 220 V, 1N, 50/60 220 V, 1N, 50/60 220 V, 1N, 50/60 220 V, 1N, 50/60
� Automatic built-in filter-washing.
� Supplied with "CHICANE" filter
packs in 304 AISI stainless steel with
built-in lighting and 2 drain pipes
diam.= 1 1/2" in 304 AISI stainless
steel.
� Brass nozzles with full
cone-shaped jets and fast joints in
stainless steel complete with gasket
and nylon connector.
STWC3024
641399
STWC3028
641427
� Water pipes in 304 AISI stainless
steel.
� All parts in contact with the inlet
air flow, at external temperature, are
insulated to avoid condensation.
� Eyebolts and screw anchors for
ceiling installation.
� Heating and air conditioning costs
reduced up to 60%.
STWC3032
641428
STWC3036
641429
ZANUSSI
P R O F E S S I O N A L
STWC3040
641430