Zanussi 200156, 200152, 200164, NCFG801C, NCFG802C User Manual

...

RANGE COMPOSITION

N 900: a range of over 150 models for the professional caterer designed to guarantee the highest level of performance, reliability, energy saving, safety standards and ergonomic operation. These concepts are reflected in the total modularity of the range that ensures innumerable configurations, either free-standing, bridged or cantilever. N900 demonstrates how advanced technology can satisfy the needs of the professional caterer. The models detailed on this sheet are 4 burner gas ranges on gas or electric oven with cast iron grid .

200102

N 900

4 BURNERS GAS RANGES - cast iron grids

FUNCTIONAL AND CONSTRUCTION FEATURES

� Burners with optimized

combustion interchangeable on site, flame failure device and protected

TECHNICAL DATA

CHARACTERISTICS MODELS

Power supply Gas Gas Gas/Electric Gas External dimensions - mm width 800 800 800 800 depth 900 900 900 900 height 850 850 850 850 height adjustment 50 50 50 50 Oven cavity - mm width 575 575 575 575 depth 700 700 700 700 height 300 300 300 300 Oven temperature min-max - °C 120, 280 120, 280 110, 285 120, 280 heat input - kW 8.5 8.5 6 8.5 Back burner dimensions - mm Ø 60, Ø 100 Ø 100, Ø 100 Ø 60, Ø 100 Ø 60, Ø 60 Back burners power - kW 6, 10 10, 10 6, 10 6, 6 Front burners dimension - mm Ø 60, Ø 60 Ø 100, Ø 100 Ø 60, Ø 60 Ø 60, Ø 60 Front burners power - kW 6, 6 10, 10 6, 6 6, 6 Net weight - kg. 155 155 155 155 Supply voltage 400 V, 3N, 50/60

INCLUDED ACCESSORIES

2/1 GN CHROME GRID 1 1 1 1

pilot light:

- 60 mm burners with continuous power regulation from 1,5 to 6 kW.

- 100 mm burners with continuous power regulation from 2,2 to 10 kW

� Manual ignition of the top burners

and piezo iginition for the oven

NCFG800C

200152

NCFG801C

200157

� Electric oven with switch knob to

control top and bottom heating elements. Oven thermostat with temperature markings in °C adjustable from 110° to 285°C.

NCFGE800C

200156

ZANUSSI

P R O F E S S I O N A L

NCFG802C

200164

4 BURNERS GAS RANGES - cast iron grids

N 900

� Gas oven with stainless steel

burners, self-stabilizing flame positioned beneath the base plate and a thermostat adjustable from 120° to 280°C.

� Worktop in 20/10 stainless steel.

Front and side panels in stainless steel with Scotch Brite finish.

� All models have right-angled side

edges to allow flush-fitting joins between units eliminating gaps and possible dirt traps.

� Stainless steel oven chamber with

3 levels of runners to accommodate 2/1GN shelves.

� Ribbed, cast-iron oven base plate. � Inside door panel in stainless steel.

� Main connections can be via the

base of the unit.

� All models provided with service

duct to facilitate installation

� All gas appliances are supplied for

use with natural gas, with LPG conversion jets supplied as standard.

� Models NCFGE800T, NCFG800T

and NCFG800T are the town gas versions.

� The special design of the control

knob system guarantees against water infiltration.

� All models can be installed on

cantilever system.

� IPX5 water protection.

� Stainless steel feet adjustables up

to a height of 50 mm.

� Handles on the oven in stainless

steel.

� Cast iron grids.

OPTIONAL ACCESSORIES

ACCESSORIES MODELS

2 PANELS FOR SERVICE DUCT (BACK TO BACK) 206202 206202 206202 206202 2 PANELS FOR SERVICE DUCT (SINGLE INST.) 206181 206181 206181 206181 2 SIDE COVERING PANELS H=700 D=900 206134 206134 206134 206134 2 SIDE KICKING STRIPS 206180 206180 206180 206180 2 SIDE KICKING STRIPS F.CONCRETE INSTAL. 206157 206157 206157 206157 2/1 GN CHROME GRID 164250 164250 164250 164250 4 FEET FOR CONCRETE INSTALLATION 206210 206210 206210 206210 4 WHEELS (2 WITH BRAKE) 206188 206188 206188 206188 CHIMNEY UPSTAND 800MM 206304 206304 206304 206304 DRAUGHT DIVERTER WITH 120 MM DIAMETER 206126 206126 206126 206126 FLANGED FEET KIT 206136 206136 206136 206136 FLUE CONDENSER FOR 1/2 MOD. DIAM.120MM 206155 206155 206155 206155 FRONT.KICK.STRIP F.CONCRETE INST.1000 MM 206150 206150 206150 206150 FRONT.KICK.STRIP F.CONCRETE INST.1200 MM 206151 206151 206151 206151 FRONT.KICK.STRIP F.CONCRETE INST.1600 MM 206152 206152 206152 206152 FRONT.KICK.STRIP F.CONCRETE INST.200 MM 206146 206146 206146 206146 FRONT.KICK.STRIP F.CONCRETE INST.400 MM 206147 206147 206147 206147 FRONT.KICK.STRIP F.CONCRETE INST.800 MM 206148 206148 206148 206148 FRONTAL HANDRAIL 1200 MM 206191 206191 206191 206191 FRONTAL HANDRAIL 1600 MM 206192 206192 206192 206192 FRONTAL HANDRAIL 400 MM 206166 206166 206166 206166 FRONTAL HANDRAIL 800 MM 206167 206167 206167 206167 FRONTAL KICKING STRIP 1000 MM 206177 206177 206177 206177 FRONTAL KICKING STRIP 1200 MM 206178 206178 206178 206178 FRONTAL KICKING STRIP 1600 MM 206179 206179 206179 206179 FRONTAL KICKING STRIP 200 MM 206174 206174 206174 206174 FRONTAL KICKING STRIP 400 MM 206175 206175 206175 206175 FRONTAL KICKING STRIP 800 MM 206176 206176 206176 206176 JUNCTION SEALING KIT 206086 206086 206086 206086 LARGE HANDRAIL(PORTIONING SHELF)400 MM 206185 206185 206185 206185 LARGE HANDRAIL(PORTIONING SHELF)800 MM 206186 206186 206186 206186 PAIR OF COVERING STRIPS FOR END ELEMENTS 206234 206234 206234 206234 PRESSURE REGULATOR FOR GAS UNITS 927225 927225 927225 927225 REAR FLUE UPSTAND FOR SMALL CHIMNEY 206159 206159 206159 206159 S/S GRID FOR DOUBLE BURNER-900 LINE 206298 206298 206298 206298 SIDE HANDRAIL-RIGHT/LEFT HAND 206165 206165 206165 206165 SINGLE BURNER RIBBED PLATE 206172 206172 206172 206172 SINGLE BURNER SMOOTH PLATE 206171 206171 206171 206171 SINGLE BURNER(6KW)RADIANT PLATE-900 LINE 206170 206170 206170 206170 SUPPORT FOR "BRIDGE" SYSTEM 1000 MM 206138 206138 206138 206138 SUPPORT FOR "BRIDGE" SYSTEM 1200 MM 206139 206139 206139 206139 SUPPORT FOR "BRIDGE" SYSTEM 1400 MM 206140 206140 206140 206140 SUPPORT FOR "BRIDGE" SYSTEM 1600 MM 206141 206141 206141 206141 SUPPORT FOR "BRIDGE" SYSTEM 400 MM 206154 206154 206154 206154 SUPPORT FOR "BRIDGE" SYSTEM 800 MM 206137 206137 206137 206137 WATER COLUMN EXTENSION FOR 900 LINE 206290 206290 206290 206290 WATER COLUMN WITH SWIVEL ARM 206288 206288 206288 206288

BACA3 2009-06-19 The Company reserves the right to alter technical specifications without prior notice.