Zanussi 132985450 User Manual

INSTRUCTION BOOKLET
132985450
GB
Quick Installation Guide:
visit our WEB SITE to view an install video
www.video.uk.electrolux.com
WASHING MACHINE
START PAUSE
EASY IRON
QUICK WASH
DELAY START
95º
E
60º
40º
30º
60º
40º
30º
40º
30º
X
40º
COTTON
DELICATES
SYNTHETICS
WOOL
60º
SPECIAL
40º
E
60º
E
SUPER RINSE
SPIN SPEED
PREWASH
DAILY
30º
1200
900
700
500
ZJ
. 1218
ON/OFF
132985450.qxd 18/07/2005 17:47 Pagina 1
2
Installation
This appliance is heavy. Care should be taken when moving it.
It is dangerous to alter the specifications or attempt to modify this product in any way.
All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in instructions.
Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
Care must be taken to ensure that the appliance does not stand on the electrical supply cable.
If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely.
Child Safety
This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the product.
Pets and children have been known to climb into washing machines. Please check your drum before use.
The glass door becomes very hot during the washing cycle. Keep children away from the vicinity of the appliance whilst it is in operation.
Keep all packaging well away from children.
Keep all detergents in a safe place out of children’s reach.
Use
Always unplug the appliance and turn off the water supply after use.
Do not overload the appliance. See relevant section in the instruction book.
Only wash fabrics which are designed to be machine washed. If in doubt, consult the care label on the clothes.
Before washing, ensure that all pockets are empty and buttons and zips are fastened. Avoid washing frayed or torn articles and treat stains such as paint, ink, rust, and grass before washing. Underwired bras must NOT be machine washed.
Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp material can cause extensive damage and must not be placed into the machine.
Garments which have been in contact with volatile petroleum products should not be machine washed. If volatile cleaning fluids are used, care should be taken to ensure that the fluid is removed from the garment before placing in the machine.
Wash small items such as socks, laces, washable belts etc in a washing bag or pillow case as it is possible for such items to slip down between the tub and the inner drum.
Only use the advised quantities of fabric softener. Damage to the fabric can ensue if you over-fill. Refer to the manufacturer’s recommendations of quantities.
As some duvets and eiderdowns should be washed in large commercial machines because of their bulk, please check with the manufacturer of the item before washing in a domestic machine.
Leave the porthole door slightly ajar between washes to preserve the door seal.
Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Zanussi Service Force Centre. Always insist on genuine Zanussi spare parts.
Important Safety Information
It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings.
These warnings have been provided in the interest of safety. You MUST read them carefully before installing or using the appliance.
132985450.qxd 18/07/2005 17:47 Pagina 2
3
Contents
For the User
Important Safety Information
2
Your New Washing Machine
4
Description of the Appliance
5 Detergent dispenser drawer 5 Child safety feature 5
The Control Panel
6-9
Programme information
10
Operating sequence
11-12 Load the laundry 11 Measure out the detergent and the fabric softener 11 Switch the machine on 11 Select the required programme 11 Select the Spin speed or the RINSE HOLD option 11 Select the required options 12 Select the DELAY START 12 Start the programme 12 At the end of the programme 12
Washing Hints
13-14
Which detergent?.... 14
And in which form? 14
Wash Care Symbols
15
Washing Programmes
16-17
19
Maintenance and Cleaning
18-19 Descaling 18 After each wash 18 Maintenance Wash 18 External cleaning 18 Cleaning the dispenser drawer 18 Cleaning the drawer recess 18 Cleaning the filter 18-19 The dangers of freezing 19 Emergency emptying out 19
Something Not Working
20-21
Service and Spare Parts
21-22
Guarantee conditions
22
For the Installer
Installation Instructions
23
Technical Specifications
23
Unpacking 24 Positioning 24 Water inlet 24-25 Water drainage 25-26 Levelling 26 Special conditions 26 In the interest of the environment 26 Electrical connection 27 Building-in 28-29
Guide to use the Instruction Book
The following symbols will be found in the text to guide you throughout the instructions:
Safety instructions Hints and tips Environmental information
132985450.qxd 18/07/2005 17:47 Pagina 3
4
Your New Washing Machine
Your new washing machine fitted with the Zanussi “JET SYSTEM”, meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption.
Even small loads are washed “economically” because the amount of water used is regulated automatically according to the load and type of fabric.
Automatic cooling of the wash water to 60°C
before draining, with the 95°C programme. This reduces thermal shock to fabrics, helping to prevent creasing.
The special wool programme with its new delicate wash system treats your woollens with extreme care.
The balance control device ensures that the washing machine remains stable when spinning.
Ecological hints
To save water and energy and help protect the environment, we recommend that you follow these hints:
Adjust the quantity of detergent according to the hardness of your water supply, the amount of laundry and the degree of soiling.
Select an “economy” programme for lightly soiled laundry.
A programme without prewash is sufficient for normally soiled laundry.
The machine works more economically if it is fully loaded.
With adequate pre-treatment, stains and limited soiling can be removed; the laundry can then be washed at a lower temperature.
In the interest of the environment
Materials marked with the symbol are recyclable.
Check with your local Council or Environmental Health Office to see if there are facilities in your area for re-cycling this appliance.
When the appliance is to be scrapped, cut off the power supply cable and make the door lock device unusable to prevent young children from being trapped inside.
Help to keep your country tidy - use authorised disposal sites for your old appliance.
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
How do we help to protect the environment? We use recycled paper!
Important
Your machine is fitted with a balance control device, which ensures the machine is stable during the spin. If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the wash load manually and select a spin programme. For more detailed information see the section headed "Something Not Working".
132985450.qxd 18/07/2005 17:47 Pagina 4
5
Description of the Appliance
1 Detergent dispenser drawer
2 Programme guide
3 Control panel
4 Door opening handle
5 Filter
6 Adjustable feet
Detergent dispenser drawer
Prewash
Main wash
Fabric softener
Child safety feature
This machine incorporates a special child safety feature to prevent small children from being trapped inside the machine. To activate this device, rotate the button (without pressing it) inside the door clockwise until the groove is horizontal. If necessary use a coin. To disable this device and restore the possibility of closing the door, rotate the button anti-clockwise until the groove is vertical.
132985450.qxd 18/07/2005 17:47 Pagina 5
1200
900
700
500
SUPER
DELAY
EASY
QUICK
SPIN
RINSE
START
SPEED
ON/OFF
PREWASH
IRON
DAILY
WASH
.
ZJ
1218
COTTON
SPECIAL
X
95º
60º
E
60º
40º
E
START PAUSE
40º
30º
WOOL
60º
30º
60º
E
40º
30º
40º
30º
40º
SYNTHETICS
DELICATES
Programme chart
P0239S
P1131
1 Detergent dispenser drawer
2 Mains-on light
This light comes on when the ON/OFF button is pressed, and goes out when it is pressed again.
3 ON/OFF button
Press this button to switch the machine on. Press it again to switch the machine off.
Programme Option buttons
Depending on the programme, different functions can be combined. These must be selected after choosing the desired programme and before depressing the START PAUSE button. When these buttons are pressed, the corresponding pilot lights come on. When they are pressed again, the pilot lights go out. If an incorrect option is selected, the corresponding pilot light flashes for about 2 seconds and the message Err is displayed.
4 SPIN SPEED button
Press this button to reduce the maximum speed of the final speed proposed by the machine for the selected programme or to select position (RINSE HOLD) . The light corresponding to the selected option illuminates.
The following speeds are available for the different fabrics:
C
OTTON, linen: 500/700/900 max 1200 r.p.m.
S
YNTHETICS and WOOL/(handwash) :
500/700 max 900 r.p.m.
D
ELICATES and MINIPROGRAMME :
500 max 700 r.p.m.
6
The Control Panel
1
2
3
4
59678 1011
12
13 14
START PAUSE
EASY IRON
QUICK WASH
DELAY START
95º
E
60º
40º
30º
60º
40º
30º
40º
30º
X
40º
COTTON
DELICATES
SYNTHETICS
WOOL
60º
SPECIAL
40º
E
60º
E
SUPER RINSE
SPIN
SPEED
PREWASH
DAILY
30º
1200
900
700
500
ZJ
.
1218
ON/OFF
Rinse Hold
When RINSE HOLD option is selected, the last rinse water is not emptied out, to prevent the fabrics from creasing. When the programme has finished, the light of the START PAUSE button and the pilot light (DOOR) go out, the light and the pilot light
(
END) are alight to
indicate that the water must be emptied out.
To empty out water there are 2 possibilities:
• Select programme (draining): The water is emptied out
without spinning.
• Select programme (spin) or (delicate spin),
reduce eventually the spin speed by means of the relevant button and then depress the START/PAUSE button. The water is emptied out and the laundry is spun at the selected spin speed.
Attention! Before selecting programmes (Drain),
(Spin) or (delicate spin), the selector dial has to
be positioned on X (cancelling).
5 PREWASH button
The machine performs a prewash cycle at 30°C max. The prewash cycle ends with a short spin at 650 r.p.m. in programmes for Cotton and Synthetics, and with emptying of the water for Delicates. This option is not available with the
WOOL/(handwash)
programme and miniprogram . For use when washing heavily soiled laundry.
6 DAILY button
This option can be used used for lightly soiled cotton or synthetic items items in order to obtain a good
washing performance in a short time.
This option cannot be used with the Economy programmes 60°E and E°40 and Miniprogram and also not in combination with QUICK WASH option.
132985450.qxd 18/07/2005 17:47 Pagina 6
7
7 QUICK WASH button
This option can be used for lightly soiled cotton, synthetic or delicate items hat have been used or worn
for a short time. This option is not available with the
WOOL/
(handwash) programme, the Energy saving programmes (60°E and 40°E) and Miniprogram .
It cannot be used also in combination with DAILY option.
8 SUPER RINSE button
This option can be selected with all programmes, except the
WOOL/ HANDWASH and Miniprogram . The
machine will add 2 rinses for cotton and 1 rinse for synthetics and delicates.
This option is recommended for people who are allergic to detergents and in areas where the water is very soft.
9 EASY IRON button
Selecting this button the laundry is gently washed and spun to avoid any creasing. In this way ironing is easier. Furthermore the machine will perform 6 rinses instead of 3 for cotton and 4 rinses instead of 3 for synthetics. This function can be used only for cotton and synthetic fabrics.
If this option is selected for cotton programmes, the spin speed automaticaly will reduce to 900 rpm.
If this option is selected for synthetic programmes with a temperature of 60°C or 50°C, the machine will perform a washing cycle at max 40°C.
10 DELAY START button
The wash programme can be delayed from 30 min - 60 min - 90 min, 2 hours and then by 1 hour up to a maximum of 23 hours by means of this button.
Selecting the delayed start
Select the programme and the required options.
Select the delay start.
Depress START PAUSE button: the machine starts
its hourly countdown.
The programme will start after the selected delay has expired. The DELAY START cannot be used with (D
RAIN), (SPIN) or (DELICATE SPIN)
programmes.
Cancelling the delayed start
Depress START PAUSE button.
Depress DELAY START button until «0’» is
displayed.
Depress START PAUSE button again, if you wish to
restart the machine immediately.
11 START/PAUSE button
This button has two functions: Start - Pause
Start
After having selected the required programme, press this button to start the machine; the corresponding pilot light stops flashing.
If you have selected the delayed start, the machine begins its countdown. The duration of the programme or the delay appears on the display.
Pause
To interrupt a programme which is running, depress the START PAUSE button: the corresponding pilot light starts to flash.
To restart the programme from the point at which it was interrupted, press the START PAUSE button again.
12 DISPLAY
The display shows the following information:
Reset/Cancelling - Duration of the programme ­Delayed start - Incorrect option selection - Alarm code - End of programme.
Reset/cancellation of the programme
If the programme selector dial is turned to X position, three blinking dashes are displayed.
Now you can select a new programme.
(If the programme selector dial has not turned to X position , when you press the ON/OFF button to switch the machine on, the display will show a blinking zero.)
132985450.qxd 18/07/2005 17:47 Pagina 7
---
8
Duration of the selected programme
After selecting a programme, the duration is displayed in hours and minutes ( for example 2.05).
The duration is calculated automatically on the basis of the maximum recommended load for each type of fabric.
After the programme has started, the time remaining is updated every minute.
Delayed start
The selected delay (23 hours max) set by means of the relevant button appears on the display for 3 seconds, then the duration of the previously selected programme is displayed.
The countdown is updated every hour and, when remain the last 2 hours, each 30 min.
IInnccoorrrreecctt ooppttiioonn sseelleeccttiioonn
If an option which is not compatible with the set wash
programme is selected, the message Err is displayed for 2 seconds.
Alarm codes
In the event of operating problems, some alarm codes can be displayed, for example E20 (see paragraph “Something not working”).
End of programme
When the programme has finished a flashing zero is displayed. The door can be opened when the (D
OOR) pilot light has gone out and if the (RINSE
HOLD
) option has not been selected.
13 Programme progress display
By selecting the wash programme, the pilot lights corresponding to the various phases making up the programme come on.
After the machine has started, the (D
OOR) pilot
light and only the running phase light illuminate and stay on. When the programme has finished, the (
END) pilot
light comes on and the the (D
OOR)
pilot light goes off.
132985450.qxd 18/07/2005 17:47 Pagina 8
2.05 E20
DELAY START
0
DOOR
PREWASH
WASH
RINSES
DRAIN
SPIN
CLOGGED FILTER
END
9
The (D
OOR) pilot light indicates if during the
washing cycle the door can be opened:
Light on: the door can be opened (when the washing machine is set to PAUSE, the (D
OOR) pilot light will go off).
Light off: the door cannot be opened (when the washing machine is set to PAUSE, the (DOOR) pilot light will start to flash)
The (END) pilot light flashes in the event of operating problems and the corresponding alarm code appears on the display.
EE1100
= the machine does not fill
EE2200
= the machine does not empty
EE4400
= the door has not been closed
To eliminate the problem, see paragraph “Something not working”.
If the (
FILTER CLOGGED) pilot light flashes at the
end of the programme this means that the drain filter must be cleaned.
14 Programme selector dial
The selector is divided into 5 sections:
C
OTTON,
SYNTHETICS
DELICATES
WOOL (hand washing)
• Special programmes
• Reset programme X
The selector dial can be turned either clockwise or anticlockwise. Position E corresponds to the ENERGY SAVING programmes and position to “cold wash”.
At the end of the programme the selector dial must be turned to position X (reset).
Functions
End of programme
When the (END) pilot light on the programme progress display illuminates, if the (D
OOR) pilot
light has gone out, the the door can be opened (if the (
RINSE HOLD) option has not been selected).
Turn the programme selector dial to X. Switch the machine off by depressing the ON/OFF button before removing the laundry.
Altering an option or a running programme
It is possible to change any option before the programme carries it out. Before you make any change, you must pause the washing machine by pressing the START PAUSE button. Changing a running programme is possible only by resetting it. Turn the programme selector dial to "X" and then to the new programme position. The washing water in the tub will not emptied out . Start the new programme by depressing the START PAUSE button.
Interrupting a programme
Depress the START PAUSE button to interrupt a programme which is running: the corresponding light starts to flash. Depress the same button to restart the programme.
Opening the door after the programme has started
You can open the door, after having set the washing machine to PAUSE, provided the following conditions exist:
• the washing machine has not heated beyond 55°C;
• the level of the water is not high;
• the drum is not turning.
If these requirements are met, the (D
OOR) pilot light
will be on and, when you pause the washing machine, it
will goes out: the door can be opened.
Should it not be possible to open the door, and should it be absolutely necessary to do so, switch the machine off by pressing the ON/OFF button.
After approximately 3 minutes, you can open the door.
Pay attention to the level and temperatures of the water in the washing machine!
When you close the door and press the ON/OFF button again, the washing machine will resume the programme from the point where it had been interrupted.
132985450.qxd 18/07/2005 17:47 Pagina 9
SPECIAL
WOOL
30º
DELICATES
40º
30º
40º
COTTON
X
95º
60º
E
60º
40º
E
40º
30º
60º
60º
E
40º
30º
SYNTHETICS
Loading...
+ 21 hidden pages