Zanussi 131456, LG2426, 131458, LG2126DX, 131457 User Manual
...
RANGE
COMPOSITION
The range consists of 4 sinks, with
all-round apron panelling, 2100,
2400 mm in length, and with two
bowls.
LG2126SX+TAP
HD DOUBLE BOWL SINKS ON LEGS
FUNCTIONAL AND
CONSTRUCTION
FEATURES
� Worktop in 12/10, 304 AISI
stainless steel, 50 mm in thickness
and with overflow rim along the top;
the worktop has welded corners.
� Sink bowl in 304 AISI stainless
steel.
� The bowls are seam welded and
polished, the base is inclined
towards the drain outlets. All bowls
are supplied as standard with an
overflow pipe and a drain hole; the
bowl is seam welded and polished,
the base is inclined towards the
drain outlets.
� Rear splashback with 10 mm
rounded corner, 100 mm in height
and 13 mm deep.
� Round section legs and 50 mm
Dia. height-adjustable (-60 +10 mm)
feet in 304 AISI stainless steel to
guarantee perfect alignment with
other food preparation equipment.
For an easy installation (in case of
external pipes or other connections)
2100/2400 mm
ZANUSSI
P R O F E S S I O N A L
legs are mounted at 80 mm from the
edge of table top.
� Quick and easy installation as the
Taps are easily installed from the
rear.
� Accessories available on request:
lower shelf, tap unit, false bowl
bottom, overflow filter, single or
double syphons.
� A 50 mm thick lower shelf, in 304
AISI stainless steel, can be easily
slotted into position, 200 mm from
the floor. The shelves are supplied in
solid versions as standard, with
TECHNICAL DATA
CHARACTERISTICS MODELS
External dimensions - mm
width 2100 2100 2400
depth 700 700 700
height 900 900 900
Worktop thickness - mm 50 50 50
Upstand dimensions - mm
height 100 100 100
depth 13 13 13
radius R=10 R=10 R=10
Bowls - n. 2 2 2
Bowl dimensions (wxdxh) - mm 600x500xH300 600x500xH300 600x500xH300
Net weight - kg. 65 65 70
Drainer position Right Left Right and Left
louvered shelves supplied on
request.
� All models comply with the more
strict international standards as far
as hygiene and cleanability are
concerned.
LG2126DX
131456
LG2126SX
131457
LG2426
131458
131456, 131457
131458
250575
622,5
700
700
155
Ø29
2100
155
Ø29
2100
575250
622,5
71.5
185
850
550
440
71.5
185
700
C
80 20
50
100
1075 250 1075
300
900
700
1122,5 1122,5
2400
155
Ø29
71.5
185
850
550
700
440
C
80 20
50
100
300
900
LEGEND
LG2126DX
131456
LG2126SX
131457
LG2426
131458
A - Hot water inlet 3/4" 3/4" 3/4"
B - Cold water inlet 3/4" 3/4" 3/4"
C - Water drain 2" 2" 2"
OPTIONAL ACCESSORIES
ACCESSORIES MODELS
DOUBLE PLASTIC DRAIN SYPHON 2" 850022 850022 850022
ELBOW OP.MIXER TAP+SPOUT-3/4"SINGLE HOLE 855322 855322 855322
ELBOW OP.TAP+SPRAY ARM+SPOUT-3/4" HOLE 855324 855324 855324
FALSE BOTTOM FOR L/H 600X500 MM BOWL 895110 895110 895110
FALSE BOTTOM FOR R/H 600X500 MM BOWL 895100 895100 895100
FOOT OP.MIXER TAP(HOT+COLD)+SPOUT-3/4" 855328 855328 855328
LOWER SHELF FOR 2100 MM UNITS 854005 854005
LOWER SHELF FOR 2400 MM UNITS 854026
MAXIREEL-RETRACTABLE HOSE SPRAY UNIT 10M 855320 855320 855320
MAXIREEL-RETRACTABLE HOSE SPRAY UNIT 15M 855321 855321 855321
MAXIREEL-RETRACTABLE HOSE SPRAY UNIT 6M 855327 855327 855327
MIXER TAP W/FOOT PEDAL FOR SINKS ON LEGS 855317 855317 855317
MIXER TAP WITH SPOUT 3/4" SINGLE HOLE 855319 855319 855319
MIXER TAP(PREMIUM)+SPRAY ARM-3/4" HOLE 855326 855326 855326
MIXER TAP+SPRAY ARM+SPOUT-3/4" SING.HOLE 855329 855329 855329
OVERFLOW FILTER FOR 600X500 MM BOWL 895135 895135 895135
PRE-WASH SPRAY UNIT,SINGLE HOLE 855315 855315 855315
SINGLE BRASS SYPHON 2" 895314 895314 895314
SINGLE PLASTIC SYPHON 2" 895313 895313 895313
WALL MIX.TAP+SPRAY+SPOUT+SH.LEVER+THERM 855307 855307 855307
WALL MIXER TAP WITH SWIVEL SPOUT 3/4" 855310 855310 855310
LG2126DX
131456
LG2126SX
131457
LG2426
131458
ZANUSSI
P R O F E S S I O N A L
www.zanussiprofessional.com
ABED2 2009-06-19 The Company reserves the right to alter technical specifications without prior notice.
Loading...