DVI over Single CAT5 Series
CV-117
DVI over Single CAT5 Direct Plug-in
Extender
User Manual
Made in Taiwan
~ 1 ~
Safety and Notice
The CV-117 DVI over Single CAT5 Direct Plug-in Extender has been tested for conformance to safety
regulations and requirements, and has been certified for international use. However, like all electronic equipments,
the CV-117 should be used with care. Please read and follow the safety instructions to protect yourself from
possible injury and to minimize the risk of damage to the unit.
Follow all instructions and warnings marked on this unit.
Do not attempt to service this unit yourself, except where explained in this manual.
Provide proper ventilation and air circulation and do not use near water.
Keep objects that might damage the device and assure that the placement of this unit is on a stable surface.
Use only the power adapter and power cords and connection cables designed for this unit.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before
cleaning.
~ 2 ~
The CV-117 DVI over Single CAT5 Direct Plug-in Extender extends your PC DVI transmission distance up to
30m (100ft) with resolution 1024x768 @60Hz. With CV-117, users can transmit high quality digital video of PC
applications through one cost effective CAT-5/5e LAN cable to the remote monitor or projector, instead of using
short and expensive DVI cables. With embedded EDID inside the extender, your PC will continue to send the
digital video even when the monitor is not connected. The user can then disconnects the monitor, place it in a
remote location and reconnect it without rebooting the operating system.
The CV-117 includes two identical units: transmitting and receiving units. The transmitting unit is connected
to your PC DVI output and the receiving unit is connected to the monitor or projector. While successfully
connected, the two LED lights on each RJ-45 connector will blink. The transmission distance between the
transmitting and receiving units can be up to 30m (100ft) under XGA (1024x768@60Hz) or 15m (50ft) under
UXGA (1600x1200@60Hz). With compact size and requiring no power, CV-117 is the most cost effective choice
for bringing your impressive digital video to the remote display.
Features
DVI 1.1 compliant
Handy DVI-D to RJ-45 adapters with programmable EDID feature
Extend the transmission length from the sources up to 30m (100ft) under XGA (1024x768@60Hz) or 15m
(50ft) under UXGA (1600x1200@60Hz)
Identical units work at both transmitting and receiving end. Easy to install.
No power required
Compact size
Direct plug-in
Perfectly integrated with other DVI over CAT5 series products
The length depends on the characteristics and quality of the cables. Higher resolutions and longer
transmission distances require low skew cables (<25ns/100m) for best performance. Unshielded CAT6 with
metal RJ-45 connectors is recommended.
DVI PC
DVI monitor/projector
Introduction
CAT-5/5e/6
LAN cable
CV-117 CV-117
Loading...