Zano Controls ZSP251, ZSP252, ZSP151, ZSP152 Installation Instructions

LAMP/LOAD
LIVE FEED
LAMP/LOAD
ZlineleD MODern whiTe SliMline leD DiMMerS
Technical Overview
The ZLINELED dimmer has been specically designed to dim LED lamps. The advanced award-winning technology ensures icker-free dimming of lamps and drivers. This technology also eliminates the need to dierentiate between leading and trailing edge lamps. It works with either. All our LED dimmers have built-in thermal and over-load protection and smart settings for optimum lamp performance. It is essential before making connections to check the load against the table to ensure it meets the specication of the dimmer switch. The ZLINELED is a modern, easy t solution for professional LED dimming.
MaXiMUM PlaTe lOaD recOMMenDaTiOnS
WATTAGE PER PLATE LED
SINGLE GANG PLATE 5-120W
DOUBLE GANG PLATE 2X 5-120W
MIN BOX DEPTH
PLATE DEPTH
DE-RATING COMMENTS?
SeTTinG The MiniMUM level
SeTTinG The MiniMUM level PreSeT :
1. Turn on the lights and turn control clockwise to full brightness.
2. Press to turn o.
3. While o, turn control knob fully anti clockwise.
4. Press again to turn on. The lights will ash to indicate that you
are now in programming mode.
5. Select the minimum light level required.
6. Release the control and wait for ve seconds. The lights will
ash again to indicate the minimum level has been stored.
7. You now have the option to set the start level (see below)
or simply wait until the lamps ash once more indicating that normal dimmer operation is resumed.
SeTTinG The STarT level
Aer following points 1-6 above, you then have 5 seconds to begin. Select the level needed for your lamps to turn on consistently, then release the control and wait for another 5 seconds. The lights will ash once more to indicate both levels have been stored and normal dimmer operation is resumed.
The BOOST FeaTUre
Some LED’s require so much energy to start up that we’ve added another feature called the boost. If you nd that the lamps do need this, simply set the start level to maximum and the boost is activated, giving the lamps an extra kick start to get going, aer which they will smoothly adjust and operate as normal.
wirinG inSTrUcTiOnS
DiMMer 2-waY SwiTch anD DiMMer
ZANO
DIMMER
-
ZANO
DIMMER
LIVE FEED
SPeciFicaTiOnS
PART NO. ZLINELED251 ZLINELED252 ZLINELED163 ZLINELED164
MODULE SIZE SINGLE SINGLE SINGLE SINGLE
LAMP TYPE LED/CFL LED/CFL LED/CFL LED/CFL
MAX WATT 250W 250W 160W 160W
MIN WATT 5W 5W 5W 5W
MIN BOX DEPTH 35 mm 35 mm 35 mm 35 mm
2-WAY SWITCHING YES YES YES YES
If you are tting more than two dimmers in the same box each dimmer must be de-rated to a maximum load of 160W per dimmer.
cOnTacT OUr FrienDlY TeaM
Unit 1 Chantry Court, Wrythe Lane, Carshalton, Surrey, SM5 2DG
Call : 0845 519 5858 Fax : 0845 519 5757 sales@zanocontrols.co.uk www.zanocontrols.co.uk
Great British Design
aBOUT ZanO cOnTrOlS
We are award winning manufacturers of LED dimming solutions and pride ourselves on providing fast, friendly, expert advice. Call us now on 0845 519 5858 for the answer to LED dimming. For our full range of products, technical advice & instructional lms or to nd your nearest stockists please see our website.
GUaranTee
For lamp test results and our full terms and conditions please see our website: www.zanocontrols.co.uk.
For terms & conditions see www.zanocontrols.co.uk For safety & certication info see www.zpatent.co.uk
Loading...