Zanker ZKS5619IE User Manual

Geschirrspüler ZKS 5619 IE
Dishwasher
Lave-vaisselle
Afwasmachine

Bedienungsanleitung
Instruction book
Mode d’emploi
Gebruiksaanwijzing

CONTENTS

Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 21

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 22

Positioning, water outlet connection, water supply connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 22

Electrical connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 22

Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 23

Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 23

The water softener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 25

Use of rinse aid, use of detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 26

Loading the machine, use of the lower basket, use of the upper basket . . . . . . . . . . . . . . . . . . . . . . . . .page 27

Adjusting the height of the upper basket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 28

Helpful hints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 29

Washing programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 30

Operating sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 31

Maintenance and cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 32

Cleaning the central filters, cleaning the large filter, internal and external cleaning . . . . . . . . . . . . . . . . .page 32

Prolonged periods of non-operation, frost precautions, moving the machine . . . . . . . . . . . . . . . . . . . . . .page 32

Servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 33

Building-in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 35

TECHNICAL SPECIFICATIONS

DIMENSIONS Width 59.6 cm

Height 81.8 ÷ 87.8 cm
Max depth 55.5 cm
Max depth with door open 111.4 cm

ELECTRICAL CONNECTION Voltage 220-230 V/50Hz
MOTOR RATING DURING WASHING 150 W
POWER OF HEATING ELEMENT 2800 W
OVERALL POWER 2950 W

WATER SUPPLY PRESSURE minimum 0.5 bar

maximum 8 bar

CAPACITY (STANDARD IEC PLACE SETTINGS) 12
CONSUMPTION: Water 17 lt

Electricity 1.3 kW/h

This appliance complies with the following E.E.C. Directives:

- 73/23 of 19.2.73 (Low Voltage Directive) and subsequent modifications;

- 89/336 of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.

PID38GB

20

WARNINGS

It is most important that this instruction book
should be retained with the appliance for future
reference. Should the appliance be sold or trans­ferred to another owner, or should you move
house and leave the appliance, always ensure that
the book is left with the appliance in order that the
new owner can get to know the functioning of the
appliance and the relevant warnings.

These warnings are provided in the interest of
safety. You MUST read them carefully before
installing or using the appliance.

Installation

■ This appliance is heavy. Care should be taken

when moving it.

■ It is dangerous to alter the specifications or attempt

to modify this product in any way.

■ Care must be taken to ensure that the appliance

does not stand on the electrical supply cable.

■ Any plumbing work required to install this appliance

should be carried out by a qualified plumber or
competent person.

■ Any electrical work required to install this appliance

should be carried out by a qualified electrician or
competent person.

■ Built-in dishwashers only: the appliance must be

secured to the underside of the worktop using the
brackets provided. Failure to do this could result in
an unstable appliance which may cause damage or
injury.

■ Care should be taken when cleaning the bottom

door seal and hinge area as any exposed metal
edges may cut if care is not taken.

■ Under no circumstances should you attempt to

repair the machine yourself. Repairs carried out by
inexperienced persons may cause injury or serious
malfunctioning.

■ This appliance should be serviced only by an

authorised Service Centre and only genuine spare
parts should be used.

Conservation

In the interests of the Environment:

■ When disposing of your old appliance:

■ Help to keep your country tidy - use authorised

disposal sites for your old appliance.

■ The materials used on this appliance marked with

the symbol are recyclable.

■ Check with your local Council or Environmental

Health Office to see if there are facilities in your
area for re-cycling this appliance.

■ When the appliance is to be scrapped, cut off

power supply cable and make the door closing
device unusable to prevent young children from
being trapped inside.

Child Safety

■ This appliance is designed to be operated by adults.

Children should not be allowed to tamper with the
controls or play with the product.

During Use

■ These dishwashers are designed to be used for

washing normal household utensils. Items that are
contaminated by petrol, paint, steel or iron debris,
corrosive, acidic or alkaline chemicals are not to be
washed in a dishwasher.

■ Under no circumstances should you open the door

whilst, the appliance is in operation. Always turn off
the appliance before opening the door.

■ When finishing loading or unloading close the door,

as an open door can be a hazard.

■ It is dangerous to lean or to sit on the dishwasher

door.

■ Unplug the appliance and turn off the water after

use.

PAV02GB

21

INSTALLATION

Remove all packaging before positioning the
machine.

Positioning

If possible, position the machine next to a water tap
and a drain.
This dishwasher is designed to be fitted under a
kitchen counter or sink.

Water outlet connection

The end of the drain hose can be connected as
follows:

- To the sink outlet siphon, securing it if necessary
with a clip;

- To a wall outlet provided with vent-hole, minimum
internal diameter 4 cm;

The waste connection must be at a height of between
30 cm (minimum) and 100 cm (maximum) from the
floor.

It makes no difference which way the drain hose
faces, either to the right or left of the dishwasher.

Avoid bending or kinking the hose as this could
prevent or slow down the discharge of water.

If you use a drain hose extension it must be no longer
than 2 metres and its internal diameter must be no
smaller than the diameter of the hose provided.

Likewise the internal diameter of the couplings used
for connection to the waste outlet must be no smaller
than the diameter of the drain hose.

Ø 21

Ø 18

Ø 18

Ø 21

min 4 cm

The water pressure must be within the limits given in
the technical specifications, as it will not function
correctly if pressure is outside these specifications.

The water supply hose is fitted with a safety device,
which prevents water from entering the machine
should the inner hose split, due to wear.

The problem is signalled by a red or yellow indicator
which appears in window (B).

If this happens, close the water tap and have the hose
replaced.

Warning: the retaining ring (A) must be properly fitted
so as to avoid water leaks.

CA13

A

1

B

2

A

B

C

Note: Only for water supply hoses with lock-fast
safety device to prevent inadvertent loosening.

To detach the hose press yellow lever (C) and turn the
retaining ring anti-clockwise ➁.

Note: the end of the hose
connected to the machine
can be positioned as re­quired, by simply slackening
the retaining ring.

Re-tighten the ring securely
to avoid water leaks.

min 30 cm

CS05

+ 2 m max

max 100 cm

Water supply connections

This dishwasher may be fed with either hot (max. 60°C)
or cold water.

Nevertheless we advise you a cold water supply.
A hot water supply is not always efficient with very

soiled crockery as it shortens the washing programmes
a lot.

Feeding the appliance with a hot water supply (max.
60°C) will allow you to obtain considerably shorter
programmes.

For making the connection itself, the coupling nut fitted to
the machine's supply hose is designed to screw
onto either a 3/4 inch gas thread spout, or to a
purpose-made quick-coupling tap such as the Press­Block.

CA06

Avoid bends or kinks in the hose, which could prevent
or slow down the flow of water.
If the machine is connected to new pipes or pipes
which have not been used for a long time, you are
advised to run the water for a few minutes before
connecting the inlet hose. This will prevent deposits of
sand or rust clogging the inlet hose filter.

Electrical connection

Before plugging the appliance into the wall socket,
make sure that:

1. the mains voltage corresponds to the voltage given
in the technical specifications;

2. the meter, fuses, mains power supply and wall
socket can all take the maximum load required.

Make sure that the socket and plug are compatible
without having to use any type of adapter. If necessary,
have the domestic wiring system socket
replaced.

Safety standards require the appliance to be
earthed.
The Manufacturer accepts no liability for failure to
observe the above safety precautions.

PIN21GB

22

USE

Control panel

12

3

45

The controls

In this fully integrated appliance the controls are locat­ed on top of the door. When selecting a programme,
the door needs to be partially opened.

Audible signals have been introduced to help indicate
which operations the dishwasher is performing.

Short «instruction accepted» signal

When any of the buttons is pressed: a short audible
signal informs you that the machine has accepted the
instruction given; if no signal is heard when a button is
pressed, this means that a programme is already run­ning or that the programme selected does not include
this function.

Long «programme run» signal

A continuous audible signal lasting about one second,
heard only when you close the dishwasher door, in­forms you that the wash programme is starting.

Intermittent «end of programme» signal

6

7

8

9

1. ON/OFF button

On

Press this button to preset the dishwasher to accept
settings (selection of wash programmes, drying
options, delayed start, etc.).
The salt pilot light and the rinse aid light comes on if
salt or rinse aid are low and the programme selector
light flashes.
The number «1» corresponding to the first selectable
programme (Rinse and Hold) appears in the digital
display.

Off

When the wash programme has ended, the dishwasher
stops automatically (an intermittent audible signal
lasting about 5 seconds informs you of this) and two
zeros «00» appear in the display window.

To switch off the dishwasher at the end of the pro­gramme, press this button again.

An intermittent audible signal, lasting in total five sec­onds, informs you that the wash programme has ended.

If you wish to deactivate these audible signals, press
both the “CANCEL” and “DELAYED START” but­tons together for about 3 seconds, until three short signals
are heard.

SO196

To reactivate the audible signals, press both buttons
together again for about 3 seconds, until the «short
instruction accepted» signal is heard.

2. Indicator lights

- Rinse aid indicator light

This pilot light comes on when the rinse aid has run
out, to remind you to top it up.

- Salt indicator light

This pilot light comes on when the salt has run out, to
remind you to top it up.
If your water is level «0» there is no need of salt,
therefore the salt indicator light will always remain on.

3. Digital display

PPC45GB

23

4. Programme selector button

8. Delayed start button

To select the required programme, press this button
until the number corresponding to the chosen pro­gramme appears in the digital display (see wash pro­gramme guide). To start the programme, simply close
the dishwasher door. A long audible signal (about one
second) informs you that the programme is starting.

5. Hot prewash indicator light

This pilot light comes on when the programmes with a
hot prewash are selected, to remind you that these
programmes require an extra dose of detergent to be
placed on top of the detergent dispenser cover. Fol­low the dosing instructions in the "Wash Programme"
chart on the following pages.

Warning: when the “HALF LOAD” option is selected
the “hot prewash indicator light” comes on only with
the “Intensive” programme (programme 2).

6. Half load button

Upper basket
Lower basket

By pressing this button, washing can be confined to a
single basket instead of both. The pilot light corre­sponding to the basket selected comes on.

This is very useful and economical when only a few
dishes need washing.

Remember to load all the dishes into the basket se­lected.

Do however follow the instructions given in the sec­tion “Loading your machine”.

SO205

Allows the start of the programme to be delayed by a
minimum of 1 hour, up to 9 hours.

How to set the delayed start

When the button is pressed, the number 1 followed by
the letter H (hours) appears in the display window;
starting of the programme has thus been delayed by 1
hour .

Press the button again to select the number of hours
by which you wish to delay the programme start, up to
a maximum of 9.

Press the button again to return to «programme set»
mode.

Close the dishwasher door to start the countdown: a
long audible signal (about one second) informs you that
the function is active. If you open the door again you will
see, in the display, how long there is to go (in hours) be­fore the programme starts. The flashing letter «H» in the
digital display means that the delayed start function has
been activated. Opening the door has no effect on a
countdown which has already been started.

If, during the countdown, you wish to see the pro­gramme number selected in the display, press the
«programme selector» button.

9. Programme cancel / change button

If you wish to cancel a programme which is already
running or a setting which has just been made, press
this button for about two seconds until the short «in­struction accepted» signal is heard. Two zeros will ap­pear in the display to indicate that the dishwasher has
been reset and that a new programme and new op­tions may be selected.

If both lights are out, washing will be carried out
in both baskets.

7. Economy drying button
No drying button

By pressing these buttons you can opt to shorten (symbol

illuminated) or completely eliminate (symbol illumi-

nated) the hot air drying cycle, so making a considerable
energy saving.

The pilot light corresponding to the option selected
comes on.

If both pilot lights are out, the full drying cycle will
be carried out.

PPC46GB

24