®
RALPH 900
INSTALLATION GUIDE
Zaneen Group Inc. © 2021, T 1800-388-3382, F 416-247-9319, www.zaneen.com
In a constant effort to supply the best product, we reserve the right to change specifications or materials without n
SUSPENSION
Page 1 of 3
IP 20
otice. The most recent specification sheets are found at zaneen.com
®
RALPH 900
INSTALLATION GUIDE
Zaneen Group Inc. © 2021, T 1800-388-3382, F 416-247-9319, www.zaneen.com
In a constant effort to supply the best product, we reserve the right to change specifications or materials without n
SUSPENSION
Page 2 of 3
61
24"
61
24"
RALPH
INSTALLATION AND USER INSTRUCTIONS
ATTENTION: PLEASE READ AND SAVE THESE INSTRUCTIONS
The safety of this tting is only guaranteed if the instructions are
followed carefully.
Installation and all non-routine maintenance must be carried out only by
qualied personal.
Disconnect before taking any action on the fitting.
Zaneen is not responsible for any damage to persons and/or property
resulting from improper installation, misuse, or unauthorized
modifications made to their products.
MODEL
D81432
* Only plug version
LAMP ASSEMBLY DIAGRAM
-Attach bracket (1) to the wall
-Open the terminal (2) and connect the cables from the mains inserted
through the rubber cap (3)
-Connect the ground wire to the terminal (X)
-Close the terminal (2) and secure the lamp to the bracket (1)
Insert the bulb (A)
Insert the lamp shade (B) on the polycarbonate shell (C ) making sure
the three hooks (D) are attached correctly.
-Insert the polycarbonate cover (C) on the mounting (E) and tighten
until the orange sticker (F) of the polycarbonate cover coincides with the
dent (G) on the mount.
MAINTENANCE
We recommend using only a soft cloth when cleaning the device. In
case of stubborn dirt, dampen the cloth, and use neutral soap if
necessary. DO
max 53W E27 IP65*
max 23W Micro Twist E27 IP65*
NOT use alcohol and /or solvents.
90
35 ½”
Example:
canopy version IP20
E
A
D81432
35 ½”
Example:
plug version IP65
90
ON
ON
OFF
OFF
Attention !
Do not plug in or unplug the
connector when power is on!
120V 50/60HZ
D
Pr otection Index
The protection rating of the lighting appliances is shown by the letters IP followed by two
characteristic digits. The rst of these two digits indicates the degree of protection that the
appliances oer against the entry of solid foreign objects. T he second one indicates the protection
against the entry of water.
Class II xture A xture for which protection against an electric shock does not rely on basic
insulation but also oers further safety measures, such as double insula tio
These measures do not require grounding devices and are not dependen t upon installation
conditions.
The device may not be disposed of with household r ubbish. This appliance is labelled in accordance
with European Directive 2002/96/EG concerning used electrical a nd electronic appliances (waste
electrical and electronic equipment – WEEE). The guideline determines the framework for the return
and recycling of used appliances as applicable throughou
please use the return and collection system available to you.
n or reinforced insulation,
t the EU.To return your used device,
B
C
G
F
otice. The most recent specification sheets are found at zaneen.com
DISCLAIMER
Zaneen Group Inc. © 2021, T 1800-388-3382, F 416-247-9319, www.zaneen.com
In a constant effort to supply the best product, we reserve the right to change specifications or materials without n
Page 3 of 3
INSTALLATION GUIDE
IMPORTANT
EN
Post Sales Support HQ 1-800-388-3382 support@zaneen.com
NO
OR
CHEMICALS
®
• Installation and electrication must be carried out by a qualified electrician, only.
• Observe all relevant building codes and regulations.
• Prior to installation or repair: disconnect power; it is the installer’s responsibility to ensure for all electrical,
mechanical and thermal compatibility.
• The LED light source contained in this xture shall only be replaced by Zaneen, or a person approved by Zaneen.
• Recommendations: Keep the instruction sheet(s) in the event of maintenance and/or disassembly.
Access detailed specication sheets and the warranty policy on the product page at zaneen.com.
FR
• L'installation et l'électrication doivent être eectuées uniquement par un électricien qualié.
• Respectez tous les codes du bâtiment et réglementations en vigueur.
• Avant l’installation ou la réparation: débranchez l’alimentation électrique; Il incombe à l’installateur des’assurer
de la compatibilité électrique, mécanique et thermique.
• La source de lumière LED contenue dans ce luminaire ne doit être remplacée que par Zaneen, ou une personne
approuvée par Zaneen.
• Recommandations: Conservez la (les) che (s) d'instructions en cas de maintenance et / ou de démontage
Accéder aux ches techniques détaillées et à la politique de garantie sur la page du produit sur zaneen.com
otice. The most recent specification sheets are found at zaneen.com
Loading...