
User Manual for ZKBUNI9INB34
Packing content
• Bluetooth keyboard x1
• User manual x1
Keyboard Specification
Bluetooth version Bluetooth 3.0
Operating distance
Modulation system
Working voltage 3.7V
time
Standby time
Charge time
Lithium battery life
Material Aluminum+ABS
10meters(no obstacle)
GFSK
100 hours
100 天
2 hours
3 years

Indicator
① Power indicator(green)/Charging indicator(red)/Fully charge indicator
(green)
② Bluetooth pairing indicator(blue)/Caps Lock indicator(green)/Battery
power indicator(red)/low battery indicator(red)
①② Reset indicator(green)
③ Micro charging port
④ Magnetic power on/off location(2 locations)
Pairing Steps
1.Power on : Place keyboard cover bottom attract to one of the magnetic
locations,power indicator turns on 5 seconds,then off.
2.Keyboard enters pairing mode:Press Fn and C keys at the same time,bluetooth
pairing indicator flashes blue.
3.Finish pairing:Turn on your device’s bluetooth setting,device searches the
keyboard pairing name”Bluetooth 3.0 Keyboard” automatically,click the pairing
name,bluetooth pairing indicator finishes flashing.Connected successfully.
4.Choose correct language:This keyboard is US layout,please change the device
language to US.

5.
iOS9/10: control+Space
(Example:If device is iOS 10 system,press “control”key always,and click Space key
at the same time.Each click can change to next language.
Shortcuts
keys function keys function
home
Brightness
decrease
Brightness
increase
search
Select all
copy
paste
cut
Fn+
Fn+
Fn+
Fn+
Volume down
Volume up
lock
delete
Bluetooth pairing
Print screen
Virtual keyboard
Previous track
Play/pause
Next track
mute
Fn+
Fn+
Fn+
Fn+
display
Page head
Page end
Line head
Line end

FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1)This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
RF Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a
minimum distance of 0 centimeters between the radiator and your body.