ZAGG Slim Book Backlit Instructions
Warranty Registration
Your ZAGG Slim Book™ comes with a one-year manufacturer’s warranty. In order to activate the
warranty, you must register your Slim Book as well as keep your purchase receipt. If you purchased
your Zagg Slim Book from Zagg.com, Zagg® has already registered it and has a copy of your proof of
purchase.
NEED MORE HELP? PLEASE SEE OUR FAQ SECTION AT: www.Zagg.com/faq
Inserting/Removing Your iPad®
To insert your iPad into the ZAGG Slim Book open the Slim Book’s case and remove
it from the keyboard (to do this pull the case up and away from the keyboard). Then,
line up your iPad with the holes in the case. Make sure the camera hole is aligned
properly as well as the opening for the Lightning® cable. When everything is aligned,
set the bottom half of your iPad in the cover and apply light pressure to ensure it is
properly settled. Snap the top half of your iPad into the cover. Check all corners to
make sure they have seated properly.
When your iPad is secure in the case, you can connect it with the keyboard by
placing it in the magnetic trough. Powerful magnets will secure it in place, but also
allow you to remove your iPad any time it benefits you.
To easily remove your iPad from the case, separate the case from the keyboard, and
then gently roll the rubber molding away from the edges while pressing the tablet
from behind. Grasp your tablet’s exposed side and lift/pull away from the Slim Book.
Disconnecting Your Keyboard
Your Slim Book features a case that protects your iPad even when it’s not connected
to your keyboard. When you’d like to use the case without the keyboard, there are
three ways you can disconnect your keyboard.
1. Press the Keyboard Hide/Show key. Pressing this key will disengage the
keyboard and allow you to use your iPad’s on-screen keyboard. Press the
Keyboard Hide/Show key again when you are ready to use the Slim Book’s
keyboard.
2. Turn off the Bluetooth connection from your iPad.
3. Turn your Slim Book keyboard off.
Powering On and Off
To turn your Slim Book on, press the Power button. To turn your Slim Book off,
press and hold the Power button for three seconds.
Pairing Your Zagg Slim Book
Pairing your Slim Book with your iPad is easy. It should only need to be paired once,
using the following directions. If the connection between your iPad and Slim Book is
ever lost, repeat these steps.
1. On your iPad select: SETTINGS > BLUETOOTH > ON.
2. Press and hold the Bluetooth
®
button for three seconds. A blue LED under
the Power button will flash until your Slim Book and iPad are paired.
3. Your iPad will display “ZAGG Slim Book” as an available device. Select this
option to complete pairing.
Charging
Your Slim Book features a powerful lithium polymer battery that lasts for up to two
years of normal use between charges*. It comes with a charging cable you can use to
charge your keyboard quickly and conveniently. To charge your Slim Book, follow
these steps:
1. Plug the micro USB connector into the charging port.
2. Plug the regular USB connector into any 5V USB outlet.
3. Remove the micro USB connector and enjoy your Slim Book for up to two
years before you need to charge it again.
*Normal use is approximately one hour of use per day without the backlit feature. Using the backlit
feature will impact battery life and require more frequent charging.
Battery Life
Loading...