Zagg ZGEXSP-BS0 Instructions Manual

ZAGG Exchange Speaker Instructions

MODEL:ZGEXSP-BS0

Input Current:5V---,0.5A

®

Your ZAGG Exchange Bluetooth speaker comes with a one-year
manufacturer's warranty. Please keep your purchase receipt and
register your Exchange on our website (purchases made on our
website are automatically registered). Replacement products must
be mailed back as soon as your new product arrives; you may incur
postage fees as a result. See our website FAQs for further details.

The ZAGG Exchange speaker is the tiny, do-it-all wireless
Bluetooth speaker. Its powerful driver delivers big, crisp sound
that's ideal for all types of music; and with its easy call controls,
built-in mic, and magnetic visor clip it's ideal for taking conference
calls on the go. Read these instructions and keep them in a safe
place for future reference.

Warranty Registration

Introduction

Your ZAGG Exchange speaker is charged and ready to deliver up
to 10 hours of play and talk time. Simply turn it on, pair it, and begin
enjoying your music and calls in clear, high-fidelity audio that goes
everywhere. Here's how to turn on and pair your Exchange speaker.

Powering and Pairing

®

1. Make sure your device's Bluetooth connection in enabled. You
can do this on many devices by accessing the SETTINGS menu,
and then choosing GENERAL BLUETOOTH ON.

2. Press and hold the power button until you hear the power up tone.
The LED above the power button will light blue and flash every
seven seconds indicating the Exchange is on.

3. Select “ZAGG Exchange” in your list of available Bluetooth

devices. A tone will sound to indicate your Exchange has paired
successfully.
NOTE: When powered on, the Exchange speaker automatically
begins searching for devices to pair with. If no device is
discovered it will enter pairing mode and the LED above the
power button will alternate flashing red and blue for two minutes.
If no device is found after two minutes, the Exchange will enter
standby mode for three minutes and then begin pairing again.
This cycle will continue for fifteen minutes, or until the Exchange

pairs with a device. If it has not paired after fifteen minutes, the
Exchange speaker will automatically power off.

4. When you are ready to turn your ZAGG Exchange speaker off,

simply hold the power button for three seconds, or until you hear
the power off tone.