ZAGG ZAGGmate f User Manual

THE iPAD’S PERFECT COMPANION

MAKING THE MOST OF

YOUR NEW COMPANION

P R O T E C T I V E C OV E R

WITH BLUETOOTH KEYBOARD & STAND

©2005 - 2011 ZAGG Inc. All Rights Reserved.
PATENT PENDING | NASDAQ: ZAGG | MADE IN CHINA
iPad® and Apple® are registered trademarks of Apple, Inc.

ZAGG, invisibleSHIELD, invisibleSHIELD with design, and ZAGGmate,
are trademarks or registered trademarks of ZAGG Inc.

This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions:
1: This device may not cause harmful interference, and
2: This device must accept any interference received, including
interference that may cause undesired operation

NEED MORE HELP? PLEASE SEE OUR FAQ SECTION AT:
www.zaggmate.com/faq

WARRANTY REGISTRATION

POSITIONING

YOUR ZAGGmate™ COMES WITH A 1 YEAR MANUFACTURER’S
WARRANTY. YOU MUST REGISTER YOUR ZAGGmate AND
KEEP YOUR RECEIPT OF PURCHASE TO ACTIVATE THE
WARRANTY. IF YOU PURCHASED ON ZAGG.COM, ZAGG HAS
ALREADY REGISTERED YOUR ZAGGmate AND HAS YOUR
PROOF OF PURCHASE.

SEPARATING

1- PLACE THE ZAGGmate VERTICALLY ON A NON-SLIP SURFACE.

2- USING TWO HANDS, PLACE ONE HAND ON EACH SIDE OF THE
ZAGGmate, WITH THUMBS SITUATED JUST ABOVE THE 30-PIN
CHARGING PORT, OR THE SIDE WITH KEYBOARD CUTOUT.

* MAKE SURE THE 30-PIN PORT IS ALIGNED WITH THE CUTOUT
WHEN CLOSING.

1- LIFT HINGE AND LOCK INTO PLACE
BY SLIDING TAB BACK INTO LOCKING
SLOTS AND APPLYING SLIGHT
PRESSURE.

2- PLACE iPAD®(EITHER IN PORTRAIT
OR LANDSCAPE MODE)
INTO CENTRAL GROOVE, AND
REST AGAINST RAISED HINGE.

CENTRAL GROOVE

RAISED
HINGE

POWERING ON AND PAIRING YOUR ZAGGmate

THE Z AGGmate’s BLUETO OTH KEYB OARD SHOUL D ONLY
NEED TO PAIR TO YOUR iPAD® ONCE AS FO LLOWS:

1- ON THE ZAGGm ate, SLIDE THE POWER BUTTON ON. THE RED
STATUS LIGHT WILL ILLUMINATE FOR FOUR SECONDS AND
T HEN TURN OFF TO SAVE POWER. YOUR ZAGGmate IS
STILL ON.

2- CL ICK ON THE BLUETOOTH BUTTON WIT H A FIN GERNAIL OR
P OINTED SHARP OBJECT.
N OTE: THE STATUS LIGHT WILL ILLUMINATE FOR 4 SECONDS
A ND THEN GO DARK TO SAVE B ATTERY POW ER.

3- ON THE iPAD®, SELECT:
S ETTINGS > GENERAL > BLUETOOTH > ON.

4- TH E STATUS LIGHT WILL FLASH ON ZAGGmate AND THE iPAD®
W ILL DISPLAY “ZAGGmate” AS AN AVAI LABLE D EVICE.

30-PIN

CHARGING PORT

3- SECURE THE ZAGGmate WITH ONE THUMB AND THE iPAD®
WITH YOUR OTHER THUMB. APPLY SLIGHT DOWNWARD
PRESSURE TO iPAD® AND SEPARATE.

KEYBOARD

CUTOUT

5- SE LECT “ZAGG mate” ON THE iPAD® ; THE i PAD® W ILL
D ISPLAY A CODE.

6- TY PE THE CODE ON ZAGGmate KEY BOARD AND PRESS ENTER;
Z AGGmate WILL NOW BE PAIRED TO THE iPAD®.

CHARGING

YOUR ZAGGmate COMES WITH A CHARGING CABLE THAT
PLU GS INTO THE SIDE OF THE DEVICE. YOU M AY PLUG THE
OTHER END OF THE CHARGING CAB LE INTO ANY USB
OUTLE T, INCLUDING T HE FOLLOWING: A COMPUTE R, YOUR
iPAD ® CHARG ER, A Z AGGsparq™, ETC. A COMPL ETE CHA RGE
TAKES 2-4 HOURS.

CHARGING

PORT