Keyboard Instructions
Slim Book Pro
Warranty Registration
Your ZAGG Slim Book Pro™ comes with a one-year manufacturer’s warranty. In order to activate
the warranty, you must register your Slim Book Pro as well as keep your purchase receipt. If you
purchased your Slim Book Pro from ZAGG.com, ZAGG has already registered it and has a copy of
your proof of purchase.
NEED MORE HELP? PLEASE SEE OUR FAQ SECTION AT: www.zagg.com/faq
See the important Health and Safety information on page 7 before using this product.
INSERTING/REMOVING YOUR iPad® Pro
Because the power and volume control buttons on your
iPad Pro sit higher than on other devices, you need to
take extra care when inserting it into the Slim Book Pro
cover. To do this, follow these instructions:
1. Insert your iPad at an angle such that the power
and volume control buttons fit into their respective
cutouts on the Slim Book Pro cover.
2. Set the rest of your iPad into the cover and press it
in. Press all around your iPad to ensure it has seated
properly.
3. To easily remove your iPad from the case, separate the
case from the keyboard, and then gently roll the
rubber overmold away from the edges while pressing
the tablet from behind. Grasp your tablet’s exposed
side and lift/pull away from the Slim Book Pro.
1
POWERING ON AND OFF
To turn your Slim Book Pro on, press the power button. The keyboard
backlights will turn on and begin pulsing for about two seconds while the
keyboard powers up. To turn your Slim Book Pro o, press and hold the
power button for three seconds. The keyboard backlights will pulse for
about two seconds and then turn o, indicating your Slim Book Pro has
turned o.
DISCONNECTING YOUR KEYBOARD
Your Slim Book Pro features a case that protects your iPad even when it’s
not connected to your keyboard. When you’d like to use the case without
the keyboard, there are three ways you can switch to your onscreen
keyboard:
1. Press the Keyboard Hide/Show button. Pressing this button will
disengage the Slim Book Pro keyboard and allow you to use your
iPad’s on-screen keyboard. Press the Keyboard Hide/Show button
again when you are ready to use your Slim Book Pro’s keyboard.
2. Turn o the Bluetooth® connection from your iPad.
3. Turn your Slim Book Pro keyboard o.
PAIRING YOUR ZAGG Slim Book Pro
Your Slim Book Pro can pair with up to three Apple, Android, or Windows
devices at once. Pairing your Slim Book Pro is easy; just follow these
instructions:
1. Ensure your device’s Bluetooth connection is on.
2. Press your Slim Book Pro’s , , or key for three seconds.
The key being used will light and begin pulsing, indicating your
Slim Book Pro is in pairing mode.
3. Your device will display “ZAGG Slim Book Pro” as an available pairing
option. Select it and complete any other pairing steps based on your
device.
4. Repeat steps 2-3 to pair your Slim Book Pro with up to two more
devices. When paired with one or more other devices, simply press
, , or to toggle between them.
5. Once paired, the Bluetooth key will stop pulsing and fade to o. Once
begun, if the Slim Book Pro doesn’t complete pairing after 60 seconds,
it will abort the process. If this happens, repeat steps two and three.
2
3
3
1
1
2
2
BATTERY LIFE
There are three ways to check your Slim Book Pro’s remaining battery
power. First, you can open your iPad’s widgets and see it displayed as
a percentage there. Second, you can download the mophie® Power app
from your favorite app store. The mophie app will walk you through
installation and how to use the app to check your battery life. Third, you
can press fn + the battery key. This will cause the LED indicator to flash
one of the following three ways:
1. Three flashes = full battery life.
2. Two flashes = approximately half battery.
3. One flash = low battery. When your Slim Book Pro reaches critical
battery level, the LED will flash once every five minutes.
3
CHARGING
Your Slim Book Pro features a powerful lithium polymer battery that
lasts for up to two years of normal use between charges*. It comes
with a charging cable you can use to charge your keyboard quickly and
conveniently. To charge your Slim Book Pro, follow these steps:
1. Plug the micro USB connector into the charging port.
2. Plug the regular USB connector into any 5V USB outlet. The Caps
Lock LED on your Slim Book Pro will light to indicate your keyboard is
charging. This LED will turn o when your keyboard is fully charged.
3. Remove the micro USB connector and enjoy your Slim Book Pro for up
to two years before you need to charge it again.
*Normal use is approximately one hour of use per day without the backlit feature. Using the backlit feature will impact
battery life and require more frequent charging.
CHARGING PORT
SPECIAL FUNCTION KEYS
Your Slim Book Pro keyboard has been designed with the following
special function keys to give you more control over your favorite devices:
BLUETOOTH 1 –
Pairs your Slim Book Pro with your preferred device. If you have
paired with a second or third device (see below) press or to instantly switch
between devices.
BLUETOOTH 2 – Pairs your Slim Book Pro to a second device. If you have paired
with other devices press or to instantly switch between them.
BLUETOOTH 3 – Pairs your Slim Book Pro to a third device. If you have paired
with other devices press or to instantly switch between them.
HOME – Displays your device’s home screen.
LOCK – Activates and deactivates your device’s sleep mode.
LANGUAGE SYMBOL - Toggles between keyboard languages (if active on
your device).
KEYBOARD HIDE/SHOW – Hides or shows your device’s on-screen keyboard.
PREVIOUS TRACK – Skips to the previous track on your selected playlist.
PLAY/PAUSE – Starts or pauses your current playlist.
NEXT TRACK – Skips to the next track on your selected playlist.
MUTE – Mutes your device’s audio.
VOLUME DOWN – Decreases your device’s volume.
VOLUME UP – Increases your device’s volume.
POWER – Turns your Slim Book Pro keyboard on and o.
CAPS LOCK – Activates the Caps Lock feature. When Caps Lock is on a blue
indicator light will remain lit until it is turned o. To turn Caps Lock o, press
Caps again.
4
To help preserve battery life, your Slim Book Pro will enter sleep mode
if left on and not used for several minutes; press any key to wake it. The
Slim Book Pro’s battery has no memory and may be charged whenever
you wish. For optimal battery life, turn your Slim Book Pro o when not in
use for a prolonged time.
1
1
1
2
2
2
3
3
3
5
SPECIAL FUNCTION KEYS CONTINUED
TROUBLESHOOTING
If your device doesn’t respond to your Slim Book Pro, there may be a
simple explanation such as a dead battery or an unsuccessful pairing.
Please use the following to help troubleshoot your situation. If none of the
following solve your issue, then please contact ZAGG Customer Service
and one of our trained professionals will be happy to assist you.
1. Restart your device.
2. Turn your Slim Book Pro o and back on.
3. Forget and re-pair your Slim Book Pro.
4. If your Slim Book Pro cannot establish or maintain a Bluetooth
connection, reset the Bluetooth module by charging your keyboard.
5. If, after charging, your keyboard doesn’t operate correctly, please
contact ZAGG’s customer service.
For more help please see our FAQ section at: www.zagg.com/faq
To reach a trained customer service representative, please use one of the following:
zagg.com/support/contact.php | questions@zagg.com
1-800-700-ZAGG [9244] | 00-1-801-839-3906 for international customers
For unparalleled scratch protection for your iPad, we recommend ZAGG’s InvisibleShield®.
FN + BACKLIGHT SYMBOL – Pressing the fn + once will turn on the backlights,
pressing them again will turn o the backlights.
NOTE: The backlights will automatically turn o after a couple seconds if not used.
Begin typing again to activate them.
FN+ DELETE – Press fn + delete to forward delete.
6
©2016 ZAGG Inc All Rights Reserved
PATENT PENDING | NASDAQ: ZAGG | MADE IN CHINA
Apple® and iPad Pro™ are trademarks of Apple Inc., registered in the U.S. and other countries.
Android is a trademark of Google Inc.
Windows is a trademark of Microsoft Corporation in the U.S. and other countries.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and
any use of such marks by ZAGG Inc is under license. Other trademarks and trade names are those
of their respective owners.
mophie is a trademark of mophie inc.
ZAGG®, InvisibleShield®, and Slim Book Pro™ are trademarks of ZAGG Inc.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT
Ths equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
The product comply with the FCC portable RF exposure limit set forth for an uncontrolled
environment and are safe for intended operation as described in this manual. The further RF
exposure reduction can be achieved if the product can be kept as far as possible from the user
body or set the device to lower output power if such function is available.
7
1. Take frequent breaks when using your keyboard. If you experience any discomfort, pain,
tingling, numbness, or burning in your neck, shoulders, arms, wrists, hands, or any other part of
the body, stop using your keyboard and consult a physician.
2. Use only micro USB chargers in connection with your keyboard.
3. Do not attempt to service your keyboard.
4. Do not disassemble or attempt to disassemble your keyboard.
5. Do not crush or puncture your keyboard.
6. Do not immerse your keyboard in water.
7. Do not put your keyboard in contact with water or other liquids as they could cause a short
circuit, fire, or electric shock that could result in injury, death, or property damage.
8. Do not use liquid or aerosol cleaners or solvents on or near your keyboard. Clean only with a
soft, dry cloth. Disconnect any cords before cleaning the keyboard.
9. Do not use your keyboard while operating a motorized vehicle, including automobile, boat, or
airplane. Doing so could put you and others at risk of serious injury, death, or property damage.
10. Do not use or place your keyboard near any heat sources including, but not limited to,
radiators, heat registers, stoves, other appliances, campfires, or barbeque grills.
11. To reduce the risk of fire or electric shock, wire or connect your keyboard to products only
in the manner instructed in the documentation included herewith. Do not attempt to modify or
adjust any ports. Any improper connections or adjustments may cause damage.
12. When you are ready to discard your keyboard, recycle your keyboard in a manner consistent
with electronic recycling requirements or recommendations in your geographic area.
Please read the precautions and operation information before using your keyboard
or any accessories that accompany it. Retain this information for future use.
Loading...