ZAGG pro keys Users Guide

pro keys

Online Manual

Warranty Registration

Your ZAGG Pro Keys wireless keyboard and detachable case
comes with a one-year manufacturer’s warranty. In order to
activate the warranty, you must register your Pro Keys as well
as keep your purchase receipt. If you purchased your Pro
Keys from ZAGG.com, ZAGG has already registered it and
has a copy of your proof of purchase.

Need more help? Please see our FAQ section at: www.zagg.
com/faq

See the important Health and Safety information on page 12 before
using this product.

1

INSERTING YOUR DEVICE

1

2

1. Holding your device in landscape mode with the volume
control buttons facing up, press the top half of your device
into the case and apply light pressure to snap it snuggly into
place.

2. Press the bottom half of your device into the case and check
each corner to make sure your device is seated properly.

2

3. Once your device has been inserted into the case, attach the
case to the keyboard by setting the case in one of the two
cradles on the keyboard (above the keys).

4. Place the top of the magnetized, foldable back flap against
the top of the back of the case. You’ll feel it magnetically snap
into place. This should create a triangular stand at the base of
the flap that props up your tablet in the case.

5. To detach the case from the keyboard, simply pull the
magnetized back flap away from the case.

6. To remove your device from the case, hold on to the top lip of
the case and press against the back of the case. Then, grasp
the exposed side of your device and lift/pull it away from the
cover.

3

REMOVING YOUR DEVICE

1. To detach the case from the keyboard, simply pull the
magnetized back flap away from the case.

2. To remove your device from the case, hold on to the top lip
of the case and press against the back of the case. Then,
grasp the exposed side of your device and lift/pull it away
from the cover.

4