Zagg keys Pro, keys Proplus Quick Manual

©2005 - 2012 ZAGG Inc. All Rights Reserved.
PATENT PENDING | NASDAQ: ZAGG | MADE IN CHINA
iPad® and Apple® are registered trademarks of Apple, Inc.

ZAGG, invisibleSHIELD, invisibleSHIELD with design, and ZAGGkeys
PRO/PROplus, are trademarks or registered trademarks of ZAGG Inc.

This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions:
1: This device may not cause harmful interference, and
2: This device must accept any interference received, including
interference that may cause undesired operation

NEED MORE HELP? PLEASE SEE OUR FAQ SECTION AT:
www.ZAGG.com/faq

PLEASE NOTE: THE ZAGGkeys PRO/PROplus IS
MADE FROM AIRCRAFT ALUMINUM WITH A
HIGH-GRADE FINISH SIMILAR TO THE FINISH ON
MANY POPULAR DEVICES.

FOR UNPARALLELED SCRATCH PROTECTION,
WE RECOMMEND ZAGG'S invisibleSHIELD®
OR ZAGGskins™.

FOLD

FRONT

BACK

WARRANTY REGISTRATION

SEPARATING

YOUR ZAGGkeys™ PRO™/PROplus™ COMES WITH A
1 YEAR MANUFACTURER’S WARRANTY. YOU
MUST REGISTER YOUR ZAGGkeys PRO/PROplus™
AND KEEP YOUR RECEIPT OF PURCHASE TO
ACTIVATE THE WARRANTY. IF YOU PURCHASED
ON ZAGG.COM, ZAGG HAS ALREADY REGISTERED
YOUR ZAGGkeys PRO/PROplus AND HAS YOUR
PROOF OF PURCHASE.

TO UPDATE YOUR iPAD® SOFTWARE, FOLLOW
THESE STEPS:

A. PLUG YOUR iPAD® INTO YOUR COMPUTER

B. OPEN iTUNES

C. SELECT YOUR iPAD® IN THE LEFT HAND COLUMN

D. CHOOSE THE BUTTON IN THE MIDDLE OF THE
SCREEN TO CHECK FOR SOFTWARE UPDATE

E. IF AN UPDATE IS AVAILABLE, PLEASE INSTALL IT.
THIS WILL TAKE A FEW MINUTES TO DOWNLOAD
FROM APPLE®

F. AFTER INSTALLATION IS COMPLETE, RESTART
YOUR iPAD® AND TROUBLESHOOTING LIST

*** IF YOU RECEIVE THE SAME ERROR MESSAGE
DURING PAIRING, IMMEDIATELY AFTER YOU PRESS
ENTER, YOU MAY HAVE A PROBLEM WITH YOUR
ZAGGkeys PRO/PROplus. PLEASE CONTACT CUSTOMER
SUPPORT AT ZAGG.COM TO RESOLVE THE PROBLEM.

NEED MORE HELP? PLEASE SEE OUR FAQ
SECTION AT: www.ZAGG.com/faq

YOUR ZAGGkeys PRO/PROplus ATTACHES
TO THE APPLE® iPAD® USING MAGNETS AT
THE TOP AND BOTTOM OF BOTH DEVICES.

1. TO SEPARATE, SET ON STABLE SURFACE
AND GRASP BOTH DEVICES FIRMLY USING
THE GROOVE AT THE TOP OF THE ZAGGkeys
PRO/PROplus, AND CAREFULLY PULL APART.
THEN, AN ADDITIONAL PULL WILL DETACH
THE BOTTOM MAGNETS.

FOLD

INSIDE RIGHT

INSIDE LEFT