Zagg keys Pro, keys Proplus Quick Manual

NEED MORE HELP? PLEASE SEE OUR FAQ SECTION AT:
www.ZAGG.com/faq

WARRANTY REGISTRATION

SEPARATING

YOUR ZAGGkeys™ PRO™/PROplus™ COMES WITH A
1 YEAR MANUFACTURER’S WARRANTY. YOU
MUST REGISTER YOUR ZAGGkeys PRO/PROplus™
AND KEEP YOUR RECEIPT OF PURCHASE TO
ACTIVATE THE WARRANTY. IF YOU PURCHASED
ON ZAGG.COM, ZAGG HAS ALREADY REGISTERED
YOUR ZAGGkeys PRO/PROplus AND HAS YOUR
PROOF OF PURCHASE.

YOUR ZAGGkeys PRO/PROplus A T T A C H E S
TO THE APPLE® iPAD® USING MAGNETS AT
THE TOP AND BOTTOM OF BOTH DEVICES.

1. TO SEPARATE, SET ON STABLE SURFACE
AND GRASP BOTH DEVICES FIRMLY USING
THE GROOVE AT THE TOP OF THE ZAGGkeys
PRO/PROplus, AND CAREFULLY PULL APART.
THEN, AN ADDITIONAL PULL WILL DETACH
THE BOTTOM MAGNETS.

TO CLOSE, LINE UP THE CUTOUT IN THE
ZAGGkeys PRO/PROplus WITH THE 30-PIN
CHARGER PORT ON iPAD®, AND PLACE iPAD®
FACE DOWN ONTO THE PRO/PROplus. THE
MAGNETS WILL ATTRACT AND SECURE iPAD®
TO THE ZAGGkeys PRO/PROplus. iPAD® WILL
AUTOMATICALLY SWITCH TO SLEEP MODE
WHEN SECURED IN THE ZAGGkeys PRO/PROplus
AND START UP WHEN THE DEVICES ARE
SEPARATED. THIS FUNCTI O N C A N B E
TOGGLED ON OR OFF IN THE SETTINGS
MENU OF YOUR iPAD®.

NOTE: THE ZAGGkeys PRO/PROplus AND
iPAD® MUST BE ALIGNED PROPERLY FOR
THE MAGNET CLOSURE TO FUNCTION. IF
THE ALIGNMENT IS NOT CORRECT, THE
MAGNETS WILL NOT ATTRACT.

POSITIONING

SIMPLY PLACE iPAD® EITHER
VERTICALLY OR HORIZONTALLY
INTO THE SLOT AND LEAN THE
DEVICE BACK. THE DESIGN OF
THE CHANNEL AND THE WEIGHT
OF THE DEVICE, WILL HOLD
YOUR iPAD® SECURELY IN PLACE
DURING NORMAL USE.

CENTRAL GROOVE

POWERING ON AND PAIRING YOUR
ZAGGkeys PRO/PROplus

THE ZAGGkeys PRO/PROplus’s BLUETOOTH
KEYBOARD SHOULD ONLY NEED TO PAIR TO
YOUR iPAD® ONCE AS FOLLOWS:

1. ON THE ZAGGkeys PRO/PROplus, SLIDE THE
POWER BUTTON ON. THE BLUE CAPS LOCK
LIGHT WILL ILLUMINATE FOR FOUR SECONDS
AND THEN TURN OFF TO SAVE POWER. YOUR
ZAGGkeys PRO/PROplus IS STILL ON.

2. PRESS THE PAIR BUTTON AND THE CAPS
LOCK LIGHT WILL FLASH INDICATING THAT
YOUR PRO/PROplus IS READY TO PAIR.

3. ON THE iPAD®, SELECT: SETTINGS >
GENERAL > BLUETOOTH > ON.

4. THE CAPS LOCK LIGHT WILL FLASH ON THE
PRO/PROplus AND THE iPAD®

WILL DISPLAY
“ZAGGkeys PRO/PROplus” AS AN AVAILABLE
DEVICE.

5. SELECT “ZAGGkeys PRO/PROplus” ON THE
iPAD®; TO PAIR.

6. YOUR iPAD® AND PRO/PROplus WILL
AUTOMATICALLY PAIR.