Zagg ID6BSF User Manual

 ID6BSF-*** Bluetooth Keyboard Function

 One，LED Indicator

1，Blue LED：Bluetooth Coding Indicator

The Blue LED will flash per second, indicating that the
Bluetooth is connecting. The LED will stop after
successfully connected. If the LED is flashed without
connection for 1 minute, it will be off

2：Blue LED：Caps Lock

Caps Lock：on, caps on; off, caps off

2：Green LED：Power indicating and keyboard reset.

Power Indicating：When the power is 3.71V-4.2V/50%-

100%,the LED will flash per second with 3
cycles

Reset Indicating：When the keyboard is inserted with

5V USB cable line, the green LED will flash
for 2 second, then red LED on, indicating
that the keyboard has been reset. .

3：Yellow LED：Power Indicating

When the power is 3.5V-3.71V /25%-49%，The yellow

LED will flash per second with 3 cycles.

2，Reddish orange LED：Low power warning and charging
indicating.

Low power warning：When the power is 3.0V-3.4V/0%-11%,The

LED will last for 0.5 second, three times per
five minute.

Charging Indicating：The LED will be on until the power

is over 90%.

Two，Coding function

Press on the Bluetooth keycap for 3 seconds indicating
that the keyboard is connecting.

Three，Sleep function(Power saving mode):

The keyboard will run into sleep code if it weren＇t

used for 20 minutes. When typing again, the Bluetooth
will be automatically connected.

Four：Keyboard off

Press the power key for 3 second, the connection will

be off and the keyboard will be off.

Five，Other functions for the keyboard: the same with
layout

Six，Remarks

1，Coding: Bluetooth comparing indicating.

2，Ordinary use: no LED indicating

3，Lowing power connecting: the low power warning will be
on after the Bluetooth is successfully connected.

4，Using in low power condition：Low power warning.

5，Using when charging: the keyboard will be charged

after the Bluetooth is connected.

6，Using when charging: the charging indicator will be on.