ZAGG Cover for iPad mini User Manual

NEED MORE HELP? PLEASE SEE OUR FAQ SECTION AT: www.ZAGG.com/faq

To reach a trained customer service representative, please use one of the following:

For unparalleled scratch protection for your iPad, we recommend ZAGG’s invisibleSHIELD®.

ZAGG®, invisibleSHIELD®, and ZAGGkeys™ Cover are trademarks or registered trademarks of ZAGG Inc.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1: This device may not cause harmful interference, and 2: This device must accept any interference

ZAGG.com/support/contact.php | [e-mail]

1-800-700-ZAGG [9244] | 00-1-801-839-3906 for international customers

©2005 - 2013 ZAGG Inc. All Rights Reserved.

PATENT PENDING | NASDAQ: ZAGG | MADE IN CHINA

iPad®, Apple®, and iTunes® are registered trademarks of Apple Inc.

received, including interference that may cause undesired operation

COVER

*WARRANTY REGISTRATION

Your ZAGGkeys™ Cover comes with a one-year manufacturer’s warranty. In order to activate the
warranty, you must register your Cover as well as keep your purchase receipt. If you purchased your
ZAGGkeys Cover from ZAGG.com, ZAGG® has already registered it and has a copy of your proof of
purchase.

NEED MORE HELP? PLEASE SEE OUR FAQ SECTION AT:

www.ZAGG.com/fa q

INSERTING/REMOVING YOUR iPAD®

To insert your iPad mini into the Cover,
start with the Cover’s keyboard in portrait
orientation with the hinge closed and on
the left. Then, with your iPad in portrait
mode and the volume control buttons
facing out (the Home button is on the
top), slide it into the hinge channel,
making sure it is firmly in place. For best
results, always insert your iPad with the
hinge closed and align its edges with your
Cover’s keyboard.

When your iPad is secure in the Cover,
you can open it, and cleverly placed
magnets, will activate your iPad’s
sleep/wake feature to help preserve
battery life. Simply open your Cover to
wake your iPad.

To easily remove your iPad, start with the
hinge closed. Open the hinge slightly
(enough that you can grasp the corner of
your iPad) and while securing the Cover,
pull your iPad away from the hinge.

To insert your iPad using the media mode,
start with the Cover’s keyboard in portrait
orientation with the hinge closed and on
the left. Then, with your iPad also in
portrait orientation (the Home button is
on the bottom), slide your iPad into the
hinge channel, making sure it is firmly in
place*. You will feel the magnets engage,
securing your device.

*NOTE: When your iPad is in media mode, it is somewhat
less secure in the channel as when in regular mode. Use
care when transporting it in this mode.

Home Button

Volume Controls

Volume Controls

Home Button

TROUBLESHOOTING

If your iPad® does not respond to your Cover there may be a simple
explanation such as a dead battery or an unsuccessful pairing. Please use
the following to help troubleshoot your situation. If none of the following
solve your issue, then please contact ZAGG customer service and one of
our trained professionals will be happy to assist you.

1. Restart your iPad by holding down the home and power button
simultaneously until it restarts. Let go of the buttons when you see the
Apple logo.

2. Turn your Cover o and back on. You should see the LED status light
illuminate briefly, if not, charge your Cover.

3. After charging, turn your Cover on. If the LED status light does not
illuminate, and your keyboard doesn’t operate correctly, please contact
ZAGG’s customer support.

4. Forget and re-pair your Cover. On your iPad, select: Settings > General
> Bluetooth > On. If you see “ZAGGkeys Cover” listed as an available
device, touch the arrow to the right of it and choose to have your iPad
forget the device.

5. Push the PAIR button on your Cover and watch for the LED status light
to flash blue.

6. Your iPad should display “ZAGGkeys Cover” as an available device.
Select it.

7. If your iPad gives you an error message, repeat the pairing process.

8. If you still can’t get your Cover to pair, it is possible your iPad needs to
have its software updated.

To update your iPad’s software, follow these steps:

1. Plug your iPad into your computer, and open iTunes®.

2. In iTunes, select your iPad.

3. Choose to check for software updates.

4. If an update is available, please install it. This will take a few minutes to
download from Apple®.

5. After your update is complete, repeat the troubleshooting process*.

* If you continually receive the same error message during pairing, or the above steps don’t work, please
contact ZAGG’s customer support for assistance.