ZAGG BKO Users Manual

USER MAN UAL

Warranty Registration

Your iFrogz FreeRein Reflect earbuds come with a one-year manufacturer’s warranty. In order to activate
the warranty, you must register your FreeRein Reflect earbuds as well as keep your purchase receipt. If you
purchased your earbuds from iFrogz.com, iFrogz® has already registered them and has a copy of your proof of
purchase. iFrogz is a ZAGG Inc brand.

NEED MORE HELP? PLEASE SEE OUR FAQ SECTION AT: www.ifrogz.com/faq

Introduction

The FreeRein Reflect wireless Bluetooth® earbuds are designed to enhance your active lifestyle. Their angled
tips slide comfortably into your ears while soft, silicone sport wings secure them in place no matter your activity.
Simple built-in controls, and a convenient microphone, are covered in silicone to protect against moisture
and to give you an easy way to control your music and calls. And with a battery that lasts up to 5.5 hours, you
can keep your tunes going even through the long workouts. Read these instructions to learn more about your
FreeRein Reflect earbuds. Keep these instructions for future reference.

Charging Your Earbuds

Your FreeRein Reflect earbuds are ready to go right out of the box. However, you
may wish to charge them fully before using them. To charge your earbuds:

1. Lift the protective cover o the charging port on your FreeRein Reflect’s
right earbud.

2. While holding the cover back, connect the included micro USB cable
to the charging port.

3. Connect the USB end of the charging cable to any USB power adapter.

4. The LED on the right earbud will light red to indicate your earbuds are
charging. When this light turns blue your FreeRein Reflect earbuds are
fully charged.

5. Disconnect the charging cable and enjoy your music anywhere, wirelessly.
When your FreeRein Reflect earbuds get low on power, the LED will
begin flashing red and a high pitched tone will sound.

Controlling Your Music and Calls

Your FreeRein earbuds are designed to make managing your music and calls during
all your activities convenient and easy. With only two buttons to control everything, you
won’t have to waste time searching awkward controls for the right function.

Power and Pairing

Pairing your FreeRein earbuds is quick and easy. They should only need to be paired
once, but if your Bluetooth connection is ever interrupted simply repeat these steps.

1. Make sure your device’s Bluetooth function is on.

2. Turn your FreeRein earbuds on by pressing and holding the power button.
A blue LED will light and a tone will sound indicating your earbuds are on.

3. Press and hold the power button for two seconds, or until you hear a
double tone, to enter pairing mode. The LED will flash red and blue until
pairing is complete. If you have paired your FreeRein earbuds before, they
will automatically enter pairing mode when turned on. If your earbuds don’t
pair within two minutes they will enter standby mode; press and hold the
power button again to resume pairing. If your earbuds sit idle for five
minutes, a tone will sound and they will power o.

4. Your device’s Bluetooth menu will display “iFrogz FreeRein Reflect Earbuds”
as an available device. Select this option to complete pairing.

5. Enjoy your music and calls through all your activities without bothersome
wires getting in the way. While playing, the LED will flash blue every second.

6. When you’re ready to turn your earbuds o, press and hold the power
button for three seconds. A tone will sound and the LED will light red briefly,
indicating your earbuds have turned o.

Functionality

Play/Pause

Press the power button quickly to
play your music. While your music
is playing, press the power button
again to pause, and once more to
resume playing your music.

Track Forward

Press the down button once quickly.

Track Back

Press the up button quickly.

Answer a Call

Press the power button (the same
motion as playing/pausing your
music) when you are receiving a call.

End a Call

During a call, press the power button.

Volume Up

Press and hold the up button on the
right earbud until your desired volume
is reached. The earbuds will sound
a high pitched tone when you have
reached their maximum volume.

Volume Down

Press and hold the down button on the
right earbud until your desired volume
is reached. Your earbuds will sound
a low pitched tone when you have
reached their minimum volume.

Product Functionality

Power/Play/Pause
Answer/End Call

Volume Up /
Track Back

Volume Down /
Track Forward

Microphone

Troubleshooting

If your device does not respond to your FreeRein earbuds there may be a simple
explanation such as a dead battery or an unsuccessful pairing. Please use the following
to help troubleshoot your situation. If none of the following solve your issue, then please
contact ZAGG Customer Service and one of our trained professionals will be happy to
assist you.

1. Restart your device.

2. Turn your earbuds o and then back on. You should see the LED illuminate
briefly; if not, charge your FreeRein earbuds.

3. After charging, turn your earbuds on. If the LED does not illuminate, and your
earbuds don’t pair and/or operate correctly, please contact ZAGG’s customer
service.

4. If your earbuds can’t establish or maintain a Bluetooth connection, reset the
Bluetooth module by charging them.

5. Have your device forget your FreeRein earbuds, and then re-pair them.
See the Pairing section to review how to pair your earbuds with your device.

For more help please see our FAQ section at: www.ifrogz.com/faq
To reach a trained customer service representative, please use one of the following:
ifrogz.com/support/contact.php | [e-mail]
1-855-443-FROG [7649] | 00-1-801-823-3411 for international customers

For unparalleled scratch protection for your devices, we recommend
ZAGG’s InvisibleShield®.

©2005 - 2015 ZAGG Inc All Rights Reserved.
NASDAQ: ZAGG | MADE IN CHINA
iFrogz™, ZAGG®, InvisibleShield®, and FreeRein® are trademarks or registered
trademarks of ZAGG Inc.
The Bluetooth word mark and logos are registered trademarks of Bluetooth SIG, Inc.