ZAGG Airtime Pro 2 SE User Manual

Factory Reset

If you have funct ionalit y issues, a factory
reset can help. Here’s how to perform one.

1. Place both buds in the case.

2. Reset the right bud.

a. Remove the right bu d from the ca se.

b. Tap and hold for 10 seconds u ntil light

flashe s red and turns off.

c. Wait 10 secon ds after red flashing

light.

d. Tap and hold for five seco nds until light

turns on and flashe s red and white.

e. Quickly tap the bud six tim es;

the light will turn off.

f. Retur n the bud to the case.

3. Reset th e left bud.

a. Repea t steps above, same as right bud.

4. Connect the left and right earbuds
by removing them from the case and
allowing them to connect to each other
for about five seconds. Once connec ted
to each other, earbud s will flash red and
white indicating pairing mode. Remove
the righ t bud from the case.

5. The earbuds are now re set to fac tory
sett ings. You will need to remove the
previous pairing from your device’s
Bluetooth® settings. Once removed,
follow pairing ins tructions at the
beginning of this qu ick star t guide.

Having Trouble?

Our IFR OGZ custo mer supp ort team is
available should you have any n eeds:

Online: www.support.zagg.com

Or give us a call at: 1-800-700-9244

AIRTIME™ PRO 2 SE

TRULY WIRELESS EARBUDS

Quick Start Guide

Introduction

Welcome t o truly wireless au dio with 25 hours* of
combined battery lif e and wirel ess charging case.

Simple Pairing

Remove e arbuds f rom case an d
remove protective cover from
contacts. Place earbuds in charging
case and allow 5 minut es to charg e.

Open ca se and remove earbuds to
initiate Bluetooth® pairing.

On your de vice’s Bluetooth menu,
selec t “IFROGZ Airtime Pro 2 SE.”

Touch Controls

L R

Quick tap

2x taps

Long hold

3x Taps

(Voice Assistant)

Using the Earbuds

Airt ime Pro 2 SE true wirel ess earbuds have
built-in touch nav igational contro ls. Just t ap
on the end of the earbud (on the IFROGZ
logo) to navigate.

Turning Earbuds On/Off

To turn the earbuds on, s imply rem ove the
buds fro m the case. To turn the ear buds of f,
simply return them to the case.

The ear buds will g o into hibernation m ode if
not used for 20 minutes.

Getting the Best Fit

To get the be st sound out of your earbud,
you nee d to have the right size e ar tip to for m
a good se al. That ’s why we provide different­sized tips.

If your ear tip feel s loose, tr y a larger size.
If you fe el too much pressure, or if the ear t ip
doesn’t fit inside your ear, try a size smaller.

Note: ea ch of your ears may require a
different-sized tip.

To see if you’ve g ot a good se al, try the yawn
test. Put in your earbuds and give a nice
yawn; if your earbuds don’t wiggl e and don’t

break the seal, the n you’ve got a go od fit.

Charging the Wireless Earbuds

The case carries enough power to charge the
earbuds up to 4 time s*.

1. Place the earbuds in the charging case.
You’ll feel them magnetically c lick into
place.

2. A red light on the earbuds will indicate
charging.

Charging the Case

Your case comes charged and ready to go.
You can re-charge the case wirelessly using
a wirele ss charging pad, or charge the case
manually using the included USB-C® cable.

Wireless Charging

1. Simply drop the charging case on a
compatible wireless charging pad.

2. The Bat tery Indicator lights on the front of
the case will flash according t o its current
batt ery level. This ind icates your case is
charging. When the case is fully charged,
all four li ghts will t urn off.

Manual Charging

1. Connect the included USB-C charging
cable to t he port on the side of your case.

2. Connec t the USB-A end o f the cable to
your preferred 5 V USB out let.

3. The Bat tery I ndicato r light will fl ash
according to its current batter y level. This
indicates your ca se is charging. When t he
case is fully charg ed, all four lights will
illuminate and the n turn of f.

4. Disconnect the charging cable.

Quick Charge Feature

Get one more hour of p laytime by nesting
the earbuds in the c harging case for ten
minutes.

Checking the Battery Level

Your case carries enough power to charge
your wireless earbuds 4 tim es for a total of
25 hours. To check how much power your
case still has, place the ear buds in the case.
The LED on the front of the case w ill
illuminate, indicating how mu ch battery
remains in the case:

If four li ghts illuminate, 75% or
more remains

If three lights illuminate, between
50 -74% re ma in s

If two lights illuminate, be tween
25-49 % remain s

If one light illuminates, les s than
24% remains.

This devic e complies with Par t 15 of the FCC Rules.

Operatio n is subject to the f ollowing two con ditions: (1) this device ma y not cause harmfu l interferenc e, and (2) this device mus t accept any
interference received, including interference that may cause undesired operation.

THE MA NUFACTURER I S NOT RESPONS IBLE FOR ANY R ADIO OR T V INTERFER ENCE CAUSED BY U NAUTHORI ZED MODIFIC ATIONS
OR CHAN GE TO THIS EQUI PMENT. SUCH MOD IFICATIONS O R CHANGE COU LD VOID THE USER ’S AUTHORI TY TO OPERATE T HE
EQU IPMEN T.

This equip ment has been tes ted and found to com ply with the limit s for a Class B digital d evice, pursuant to p art 15 of the FCC Rules. T hese
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radia te radio frequen cy energy and, if not i nstalled and use d in accordance wit h the instruct ions, may cause har mful interfer ence to
radio commu nications. Howe ver, there is no guarante e that interfe rence will not occur i n a particular ins tallation. If thi s equipment does c ause
harmful in terference t o radio or televisio n reception, which c an be determined b y turning the equip ment off and on, the u ser is encourage d to
try to cor rect the inter ference by one or mor e of the following me asures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect t he equipment int o an outlet on a circuit di fferent from th at to which the rece iver is connecte d.

- Consult th e dealer or an exper ienced radio/ TV technician f or help.

This equip ment complies wit h FCC radiation exp osure limits set f orth for an uncon trolled environme nt. End user must fo llow the specific
operatin g instruction s for satisfy ing RF exposure co mpliance. This tra nsmitter must n ot be co-locate d or operating in con junction with any o ther
antenna or transmitter.

Drivers: 6mm Resistance: 16 Ohms ± 15% Sensitivit y: 100dB ± 3d B Frequency: 50Hz - 20KHz Working Time: 5+20 hrs
Charging Time: 1.5-2h

Warranty information available at www.zagg.com/warranty-policies
©2020 ZAGG I nc All Rights Res erved | NASDAQ: Z AGG | MADE IN CH INA
The Blueto oth® word mark and lo gos are register ed trademarks ow ned by Bluetooth S IG, Inc. and any use of s uch marks by ZAGG I nc is under license .
USB-C is a t rademark of USB I mplementers For um.
Other trademarks are property of ZAGG.
*All hours usag e and charging claim s are estimates ba sed on internal te sting and will var y based on individ ual usage.

314-008 49 | 07/15/20