Zacuto Z-DER User manual
ENFORCER
INSTRUCTIONS
TO UNFOLD GUNSTOCK PUSH DOWN ON SILVER BOLT WITH YOUR THUMB
WHILE PULLING UP ON THE BOTTOM OF THE GUNSTOCK ARM.
1
PRESS
DOWN
PULL UP
NEXT PRESS THE LEVER AS SHOWN AND RAISE THE CAMERA SUPPORT
ARM INTO POSITION.
3
FIRST POSITION:
ST
1
ND
2
for use with cameras
equipped with a z-finder.
SECOND POSITION:
for use without a z-finder.
WITH THE GUNSTOCK ARM
LIFTED, ROTATE THE ARM
2
180º INTO THE OPEN
POSITION AS SHOWN.
WITH YOUR CAMERA ATTACHED TO THE
GORILLA PLATE, ENGAGE 15MM ROD
4
STUD INTO THE BOTTOM OF THE
BASEPLATE AND SECURE BY TURNING
THE RED LEVER.
PULL UP TO
LEFT LOOSE
NEED MORE
HELP
check out our tutorial videos
at zacuto.com
YOUR CAMERA
HERE
?
NOTE:
PRESS
RE-POSITION
RIGHT TIGHT
NOTE: Gunstock:
The gunstock can be pivoted so that it makes optimal contact
with the shooter’s chest or shoulder. Loosen the 2 screws to
pivot the pad to the correct angle.
In some instances, depending on the type of camera used or the
size of the shooter, the gunstock pad will need to be flipped into
the down position for optimal comfort. To do this, unscrew the 2
10-32 allen screws completely, flip the gunstock 180 and reattach the screws.
5/32” allan
Loading...