Page 1
ZACO-A10
Robot Vacuum Cleaner
User Manual
English
Deutsch
Español
Français
Italiano
Find more information at
www.zacorobot.eu
Page 2
English •
Dear Customer,
thank you for purchasing ZACO A0 robot vacuum cleaner!
You‘ve joined the millions of people who clean with robots - the smarter way
to get it down.
Please take a few moments to read this manual and get acquainted with your
robot, to get the best performance from your robot. lf you have any problem,
please don‘t worry, you are supposed to contact our customer service rst or
visit our website at www.zacorobot.eu for more information.
Best regards,
ZACO Customer Service
ZACO Customer Service
Customer Service Number:
00800-42377961 (European Free Call)
0209-513038-383 (Direct Line - DE)
Email: hello@zacorobot.eu
2 Find more information at www.zacorobot.eu
Page 3
Engish •
Contents
Safety Instructions ......................................................................................4
Product Parts ................................................................................................. 6
Main body / dust bin / Water tank / Charging dock / Remote control ............6-8
Accessories ...........................................................................................................................9
Product operation .....................................................................................10
Charging ............................................................................................................................. 10
Remote control ................................................................................................................. 10
Starting Up / Pause / Sleep ............................................................................................12
Scheduling ........................................................................................................................... 17
Water tank operation ......................................................................................................20
App download and user instruction ............................................... 22
Product maintenance .............................................................................23
Main brush maintenance ............................................................................................. 23
Dust bin and lters maintenance ..............................................................................24
Water tank maintenance .............................................................................................. 25
Fall sensors and charging dock ..................................................................................26
Troubleshooting ........................................................................................ 27
Product Specications ..........................................................................28
Find more information at www.zacorobot.eu 3
Page 4
English •
Safety Instructions
Before using the electrical device, basic precautions should always be followed.
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.
PLEASE SAVE THESE INSTRUCTIONS.
1. This device is not suitable to be used by children under the age of 8 or by people
with physical or emotional disabilities. If to use, please operate the device under the
supervision of a guardian. Please do not let the child sit on the robot or use the
robot as a toy.
2. Please remove all obstacles such as power cords or other small items before using
the robot. Do not let curtains or tablecloths touch the oor. When using the
mopping function, please fold the edges of the carpet so that they work as a barrier
for the robot or use the ZACOHome app to declare a “carpet area”.
3. If there are stairs, please do a test run to see whether the robot detects the edge of
the staircase.
4. Please follow the instructions in this manual to operate the robot.
5. Make sure the power supply voltage matches the voltage marked on the charging
station.
6. Use the robot only indoors and only in home environments. Do not use it outdoors
or in commercial or industrial environments.
7. Only use the original rechargeable battery and charging station provided by the manufacturer. Non-rechargeable batteries are strictly forbidden to use. For battery
details, please refer to the technical specications.
8. Do not let the robot get into contact with water.
9. Do not wipe the robot with a wet cloth.
10. Do not use the robot on wet oors.
11. Do not use the robot around open res or around fragile objects.
12. Do not use the robot in temperatures over 40 degrees Celsius or below -5 degrees
Celsius.
13. Do not let hair, cloth or ngers come close to the product‘s openings or operating
parts.
4 Find more information at www.zacorobot.eu
Page 5
Engish •
Safety Instructions
14. Do not let the robot suck in any material or items that might get stuck in the device,
such as stones, paper, etc.
15. Do not let the robot vacuum ammable materials such as gasoline or printer toner.
16. Do not allow the robot to absorb any products that are burning such as cigarettes,
matches, ashes, or other items that may cause a re.
17. Do not use the robot if the suction port is blocked. Clean up dust, hair, cotton, etc. to
ensure air can ow smoothly.
18. Do not use a damaged charging station.
19. Do not use the power adapter to drag or pull the robot or its charging station. Do
not allow the robot to operate while the power adapter is attached. Keep the power
adapter away from heat sources.
20. If the power adapter is damaged, replace it with an ocial ZACO power adapter
only. Do not use uncertied replacement parts from third parties.
21. Make sure the dust bin and the lter are properly installed before using the robot.
22. Do not use the robot if a baby is sleeping in the room.
23. Do not use the robot when the device is damaged due to dropping it, water
damage, or outdoor use. To ensure warranty, only let the robot be repaired by the
ocial ZACO Repair Service. In this case, please contact the ZACO Customer
Support.
24. If the robot will not be used for a long time, disconnect it from the power supply
and turn o the power switch on the side of the device.
25. Before cleaning and maintaining the product, please turn o the power switch.
26. Before cleaning and maintaining the product, please disconnect the power adapter.
27. Before disposing the product, please remove the device from the charging station,
turn o the power switch and remove the battery.
28. When disposing the battery, you must follow local laws and regulations.
29. Never dispose of the robot or its battery by putting it on re as it may cause an
explosion, even if the product is severely damaged.
30. Please follow the instructions to use the product. ZACO by Robovox Distributions
GmbH will not take responsibility for loss or damage caused by improper use.
Find more information at www.zacorobot.eu 5
Page 6
Product parts
English •
Main body and parts
Auto clean button
Charging pins
Battery lid
Left / right wheel
Anti bumper sensors
WiFi Indicator
Laser sensor
Dustbin release button
Cli sensor
Nose Wheel
Side brushes
Main brush
Dust bin
Dust bin
6 Find more information at www.zacorobot.eu
Power switch
Charging plug
Page 7
Engish •
Product parts
Dust bin
High-performance lter
Dust bin release button
Cellular lter
Dust bin
Dust bin
Dust bin cover
Water tank
Water tank
Water tank
Find more information at www.zacorobot.eu 7
release button
Water lling nozzle
Mopping cloth
Page 8
Product parts
Charging Station
Power indicator light
Power adapter
Charging pin
Remote control
English •
Charging port
Charging station
baseplate
Display screen
Direction
Direction
AUTO mode / Pause
Clock setting
Spot mode
charging station
Note: / / / cannot be used during a cleaning cycle.
8 Find more information at www.zacorobot.eu
Schedule setting
MAX mode
Edge modeReturn to
Page 9
Engish •
Product parts
List of Accessories
Robot
Rubber brush
rengøringsværktøj
Remote control
ZACO-A
Robot Vacuum Cleaner
User Manual
Charging dock/Plate
V-børster
Extra Side Brushes
Power adapter
Water tank/ Mop
High Performance Filter
Cleaning tool
User manual
(2) Ekstra sidebørster
Find more information at www.zacorobot.eu 9
Page 10
English •
Product operation
Charging Station
1
Place the charging station
1. Connect the adapter to the charging station
2. Place the charging station on the ground. Do not place any objects 1m to its left /
right side and 2 m to its front. Reective objects, in particular, can cause issues with
nding the charging station.
3. Connect the power supply.
Note: After the charging station is connected, the indicator light on the top
of the charging station will be on.
2
Turn on the robot
The power switch is at the side of the robot.
Press “I” to turn on the robot; Press “O” to
turn it o.
Note: After the robot nished cleaning, it is recommended to not turn it o,
and let it charge for the next use.
10 Find more information at www.zacorobot.eu
Page 11
Engish •
Product operation
3
Start charging
Put the robot on the charging station so that the charging pins on the bottom of the
robot align with the ones on the charging station.
a) Auto charging
1. In Auto mode, the robot will search for the charging
station to charge when the battery is low.
2. In standby mode, press the
remote control to instruct the robot to search for
the charging station.
Note: Please pay attention to the charging pins. Dirty pins will negatively aect charging.
button on the
b) Manual charging
Turn on the power switch on the side of the robot.
Plug the power adapter jack directly into the robot
and connect the other side of the adapter to the
electrical socket to charge.
1. For daily use, please place the robot on the charging station. Make sure
that the power adapter is plugged in and that the robot is turned on.
2. If the robot will not be used for a long time, please charge it completely
before turning o the power switch. Store the robot in a dry and ventilated
place.
3. In schedule mode, please do not use the manual charging method. Otherwise, the robot cannot perform the cleaning task at the scheduled time.
Find more information at www.zacorobot.eu 11
Page 12
Product operation
Remote control operation
1
On / o
1. Press this button to switch from sleep mode to standby mode.
2. In standby mode, press this button to start cleaning.
3. During the cleaning process, press this button to stop cleaning.
2
Clock
Press this button to set the current time.
3
Spot mode
Press this button to start spot cleaning.
4
Return to charging station
Press this button to instruct the robot to return to the charging station.
English •
5
Schedule
Press this button to set up a cleaning schedule. The robot will start cleaning according
to the scheduled time. To change the scheduled time, press the button. If it shows
“00:00” on the remote control display, the scheduled time is canceled.
6
Edge mode
Press this button to start edge cleaning, where the robot cleans along the walls. After
cleaning, the robot will return to the charging station or the point where it started from.
7
MAX mode
Press this button to start MAX mode cleaning, where the robot cleans with maximum
power output.
Note: Please place two AAA/R03 batteries into the remote control before using it.
Please take out the batteries if the remote control is not used for a long time.
12 Find more information at www.zacorobot.eu
Page 13
Engish •
Product operation
Starting up / Pause / Sleep
• Sleep mode: The power switch is on and the Auto cleaning indicator light is not
ashing. The robot is currently not cleaning.
• Standby mode: The power switch is on and the Auto button indicator light is
ashing. The robot is currently not cleaning.
• Cleaning mode: Light is bright, but not ash. The robot is currently cleaning.
1
Starting up
Press on the robot or press on the remote control to start cleaning.
Note: If the robot is in sleep mode, press to enter standby mode.
When you press again, the robot will start cleaning.
2
Pause
The pause function switches between cleaning mode and standby mode.
Press on the robot or on the remote control to stop the cleaning process.
Note: When the robot is paused, press
on the device or on the remote
control to restart the cleaning process.
3
Sleep mode
To enter sleep mode: Press and hold the button on the robot for 3 seconds.
The robot will then switch to sleep mode if no further instructions are given within
10 minutes.
Find more information at www.zacorobot.eu 13
Page 14
English •
Product operation
Robot operation
1
Auto button
• Press this button to switch from sleep mode to standby mode.
• In standby mode, press this button to start cleaning.
• When cleaning, press this button to stop the cleaning process.
Cleaning modes
To ensure the best cleaning experience, the robot comes with dierent cleaning modes.
The dierent modes can be activated by using the remote control or the ZACOHome app.
Note: To start any of the modes described below, please make sure that the robot
is turned on and that the Auto button indicator is ashing.
1
Auto mode
Press on the robot or on the remote control to
start the Auto mode. In this mode, the robot will clean
the room in an ecient “zig-zag” path as shown in the
picture. It will automatically calculate and clean the
missed areas.
• The robot will automatically carry out the cleaning path during the work
process. If it is moved manually or operated via remote control, the robot will
re-plan the cleaning path, and the already cleaned area may be cleaned again.
To ensure eciency, please do not interrupt the cleaning process by pressing
other buttons.
• During the cleaning process, the robot will pause for a short time to calculate
the uncleaned areas and plan a new path. Please wait patiently. The times and
duration of the pauses depend on the complexity of the home environment.
14 Find more information at www.zacorobot.eu
Page 15
Engish •
Product operation
2
Spot mode
This mode is applicable for an area with highly
concentrated dirt or dust. In the spot cleaning
mode, the robot will focus on cleaning one specic
area in a circular path. After cleaning is nished, it
will return to the charging station.
3
MAX mode
This mode is ideal for very dirty oors. Press
to increase the suction power to clean very dusty
areas. Press again to change to low suction power,
then press the third time again to switch back to
normal section.
4
Return to charging station
During the cleaning process, the robot can sense low
battery and will automatically search for the
charging station when charging is required.
It is also possible to press the
button on the
remote control to instruct the robot to return to
its charging station.
Find more information at www.zacorobot.eu 15
Page 16
Product operation
5
Schedule
A cleaning time can be scheduled. When the
remote control’s Schedule icon and the rst
two numbers on the display are ashing, the
robot enters schedule mode.
6
Edge mode
This mode is good for cleaning the edges and
corners of a room. In edge cleaning mode, the
robot drives along a border (e.g. the wall) to clean
and will stop working after running a whole circle.
English •
16 Find more information at www.zacorobot.eu
Page 17
Engish •
Product operation
Scheduling
For convenience, you can set up a schedule for regular cleaning. To do so, the current
time and the planned cleaning times need to be set up via remote control or the
ZACOHome app. The robot will then clean according to the scheduled time.
1
Set up the current time
Press the
icon and the rst two numbers
will then be ashing.
Find more information at www.zacorobot.eu 17
button. The clock
Press the
numbers. Press the buttons to
change hour and minutes.
After setting the time, press the
When a prompt tone can be heard,
the current time setting was saved
successfully.
buttons to adjust the
button to save the changes.
Page 18
Product operation
2
Set up the schedule time
English •
Press the button. The Schedule icon
and the rst two numbers will then
be ashing.
18 Find more information at www.zacorobot.eu
Press the
numbers. Press the buttons to
change hour and minutes.
After setting the time, press the
begin to work at the scheduled time.
buttons to adjust the
button to save. The robot will
Page 19
Engish •
Product operation
3
Cancel a schedule setting
• Press the button to change the
scheduled time. When it shows “00:00”
on the remote control display, save by
pressing the button again. Then
the scheduled time setting is deleted.
• Turn o the power switch of the robot.
The scheduled time setting will be
canceled.
• When changing the time setting for the current time or the scheduled time,
a prompt tone will be heard. If no prompt tone is heard, it means the change
was not saved.
• You need to setup the current time and the scheduled time again when you
change the batteries of the remote control.
Find more information at www.zacorobot.eu 19
Page 20
English •
Product operation
Water tank operation
Using the water tank is optional. After vacuuming is completed, the dust bin can be
replaced by the water tank for mopping.
Warning:
• If the robot is stopped during the mopping process (e.g. to add water or to rinse
out the mop cloth), the robot will reprogram its cleaning path and already
cleaned areas will be mopped again. To have a better mopping eect, it is
recommended to use the mopping function in one room at a time.
• If another room needs to be mopped, please manually move the robot to that
room. Add water or rinse out the mop cloth if necessary.
• Please do not use the water tank on carpet. If you have a carpet in your house,
roll up the edges to prevent the robot from climbing and soiling the carpet.
Alternatively, you can declare a “carpet area” via the ZACOHome app which the
robot recognized as an area that needs to be vacuumed but not mopped.
• Please add water and rinse out the mop cloth regularly. Remove the water tank
from the robot to rell it.
• Please remove the water tank while charging.
20 Find more information at www.zacorobot.eu
Page 21
Engish •
Product operation
1
Add water
Open the rubber plug at the top of the
water tank and slowly pour in clean
water through the nozzle. Make sure
to close the tank securely afterwards.
3
Install water tank
2
Install mop cloth
Turn the water tank around and install
the mopping cloth by attaching the
edges rst and then letting the cloth
stick to the velcro.
4
Mop function
Take out the dust bin and install
the water tank.
Find more information at www.zacorobot.eu 21
Press the Auto button to start the
mopping function.
Page 22
App download and user instruction
Dowloading the app
Your robot can be controlled remotely with the “ZACOHome” smartphone app.
Please download the app from the Google Play Store or the iOS App Store.
To connect your robot to the app, please follow the instructions given by the app.
English •
Connecting the robot
1. Make sure the smartphone is
connected to the home Wi-Fi
network and has good signal.
2. Create an account in the
ZACOHome app and log in.
3. Turn o the robot and turn it back
on before pairing to the Wi-Fi.
22 Find more information at www.zacorobot.eu
Page 23
Engish •
Product maintenance
Warning:
Please turn o the power switch and unplug the power adapter from the charging station before cleaning and maintaining the robot and its accessories.
Main brush and side brush maintenance
Side brush cleaning
Using the water tank is optional.
After vacuuming is completed,
the dust bin can be replaced by
the water tank for mopping.
Main brush cleaning
Take out the main brush and remove hair and dirt by using the cleaning brush.
Find more information at www.zacorobot.eu 23
Page 24
Product maintenance
Dust bin and lter maintenance
Please take out and empty the dust bin and lters after each use.
• Take out the dust bin to empty it. Also check and clean the suction port.
• The high-performance lter can be cleaned by tapping out the dirt.
It cannot be rinsed or washed.
English •
Press the release button and
pull the dustbin out.
Empty the dust bin over a trash can. Take out the lters and clean them.
Use the cleaning brush to clean the tank. Assemble the parts of the tank.
24 Find more information at www.zacorobot.eu
Open the dustbin.
Page 25
Engish •
Product maintenance
Water tank maintenance
1
Cleaning the mop cloth
After mopping is nished, please
remove the water tank from the
Rinse the mop cloth with water
and let it air dry.
robot and detach the mop cloth.
2
Cleaning the water tank
After mopping is nished, please
remove the water tank from the robot,
detach the mop cloth and pour out the
Clean the water tank with a mildly wet
and clean cloth. Let the water tank air
dry by keeping the rubber plug open.
remaining water.
Warning: Never immerse the tank completely in water!
Find more information at www.zacorobot.eu 25
Page 26
Product maintenance
Drop sensor and charging pin maintenance
Use a dry cloth to clean the robot‘s loading pins and drop sensors to maintain their
sensitivity. Instructions for doing so are shown in the images below:
English •
Warning:
• Please take out the battery when the device will not be used for a long time. If a battery
leak occurs, please remove the battery, clean the battery compartment, and contact the
ZACO Customer Service.
• If the battery is deeply discharged or not used for a long time, the battery capacity will
be reduced, and it is recommended to activate the battery. To activate it, manually place
the robot on the charging station. Remove the robot after charging for 3 minutes and
repeat this 3 times. After that, charge the device for 3-5 hours.
• This product uses a long-life battery that does not require frequent replacement.
If you want to replace it anyway, please contact the ZACO Customer Service.
26 Find more information at www.zacorobot.eu
Page 27
Engish •
Troubleshooting
Maintenance and accessory replacement schedule
Item Maintenance Time Replace
Dust bin Each time after use /
High-performance lter Once a week (or twice a week if there are pets) Every two months
Main brush Once a week (or twice a week if there are pets) If necessary
Side brushes Once a week If necessary
Charging station Once a week /
Voice prompt
When the robot has a problem, the Auto button will be ashing a red light and the robot
play a voice prompt. Please refer to the following table for problems and their reasons.
Item Voice Prompt Reason Replace
01 Please clean left side brush Left brush abnormal Please clean left side brush
02 Please clean right side brush Right brush abnormal Please clean right side brush
03 Please check left wheel Left wheel abnormal Please check left wheel
04 Please check right wheel Right wheel abnormal Please check right wheel
05 Please check and clean turbo fan Motor abnormal Please check and clean suction port
06 Please clap front bumper Front bumper abnormal Please tap front bumper
07 Please clean drop sensors Drop sensors abnormal Please clean drop sensors
Please put the robot back on
08
09
10
11 Please turn on the power switch
the ground
Please put the robot back on the
charging station to recharge
Please pull out the plug from
robot
The
Robot is not on the ground Please put robot back to ground
Robot failed to nd charging dock (station)
button is pressed while the robot is charging
with the power adapter plugged in.
The
button is pressed while the robot is on the
charging station with the power switch turned o.
Please put robot back to charging
Please check and pull out the plug
Please check and turn on the power
dock to recharge
from the robot.
switch.
Note: If the problem is still not solved, please follow the instructions below:
• Please turn o and turn on the power switch to restart the robot.
• If the problem is not solved after a restart, please contact our ZACO Customer Service.
Find more information at www.zacorobot.eu 27
Page 28
Product Specications
Robot specications
English •
Type
Mechanical
Electrical
Cleaning
Description Specication
Diameter 330 mm
Height 92 mm
Net Weight 2,65 kg
Voltage 14.8 V
Battery Type Li-ion 2900 mAh
Power 22 W
Charging Method
Dustbin capacity 0,45 l
Cleaning Modes
Charging Time < 380 min.
Cleaning Time >90 min.
Main Body Mechanical button
Automatic charging /
Manual charging
Auto/ Spot/
Edge/ Schedule
28 Find more information at www.zacorobot.eu
Page 29
Engish •
Find more information at www.zacorobot.eu 29
Loading...