YZ DMC01, PMC01 Technical data

1

Timers
Multifunction
Types DMC01, PMC01

• Time range 0.1 s to 100 h

• 7 knob selectable functions
Op - Delay on operate, manual start
Oa - Delay on operate, automatic and manual start
In - Interval, manual start
Ia - Interval, automatic and manual start
Nr - Interval with no time reset, manual start
Na - Interval with no time reset, automatic and

manual start

Dr - Delay on release

• Knob selection of time range

• Knob adjustable time setting

• External adjustable time setting available

• Repeatability: ≤ 0.2%

• DC supply for PNP/NPN and Namur sensors

• Output: 8 A SPDT or 2 x 8 A SPDT relay

• For mounting on DIN-rail in accordance with DIN/EN

50 022 or Plug-in

• 22.5 mm or 45 mm Euronorm or 36 mm Plug-in

module housing

• LED indication for relay status and power supply ON

Product Description

Multi-voltage timer with 7
knob selectable functions
and 7 knob selectable time
ranges within 0.1s and
100h. Remote time setting
available.

15 VDC, 10 mA (1 relay) or 24
VDC, 15 mA (2 relays) supply
for PNP/NPN sensors and 8.2
VDC supply for Namur sensor.
For mounting on DIN-rail
(DMC01) or Plug-in (PMC01).

Type Selection

Mounting Output Housing Supply: 24 VDC Supply: 24 or 48 VAC Supply: 115 or 230 VAC

For DIN-rail 1 x SPDT D - 22.5 mm DMC 01 C 724 DMC 01 C B48 DMC 01 C B23
For DIN-rail 2 x SPDT D - 45 mm DMC 01 D 724 DMC 01 D B48 DMC 01 D B23

Mounting Output Housing Supply: 24 VDC Supply: 24 VAC Supply: 115 VAC Supply: 230 VAC

Plug-in 1 x SPDT P - Housing PMC 01 C 724 PMC 01 C 024 PMC 01 C 115 PMC 01 C 230
Plug-in 2 x SPDT P - Housing PMC 01 D 724 PMC 01 D 024 PMC 01 D 115 PMC 01 D 230

Time Specifications

Time ranges

Knob selectable 0.1 to 1 s

1 to 10 s
6 to 60 s
60 to 600 s

0.1 to 1 h
1 to 10 h
10 to 100 h

Setting accuracy ≤ 5%
Repeatability ≤ 0.2%
Time variation

Within rated power supply ≤ 0.05%/V
Within ambient temperature ≤ 0.2%/°C

External time setting

Linear remote potentiometer 10 kΩ
Max length of pot. cable 3 m

Reset

Manual reset of time
and/or relay Close the trigger contact
Pulse duration ≥ 10 ms
Power supply interruption

1 relay versions: ≥ 700 ms

2 relays versions: ≥ 200 ms

PNP/NPN sensor supply output

1 relay versions: 15 VDC, 10 mA

2 relays versions: 24 VDC, 15 mA

pins + and - or 6 and 7
pin + or 6 positive

Namur sensor connection 8.2 VDC, 1kΩ

pins + and S or 6 and 5
pin + or 6 positive

DMC01C

DMC01D PMC01

Ordering key

DMC 01 C B23

Housing
Function
Type
Item number
Output
Power Supply

2

DMC01, PMC01

Supply Specifications

General Specifications

Power supply Overvoltage cat. III

Rated operational voltage (IEC 60664, IEC 60038)
through terminals:
A1, A2 or A1, A3 (DMC01)

B48 24 or 48 VAC ± 15%

45 to 65 Hz

B23 115 or 230 VAC ± 15%

45 to 65 Hz

724 24 VDC ± 20%

2, 10 (PMC01)

024 24 VAC ± 15%,45 to 65 Hz
115 115 VAC ± 15%,45 to 65 Hz
230 230 VAC ± 15%,45 to 65 Hz
724 24 VDC ± 20%

Voltage interruption ≤ 10 ms
Rated operational power

AC supply: 5 VA
DC supply: 2 W

Power ON delay ≤ 100 ms
Reaction time from trigger

Delayed contact(s) < 10 ms
Instantaneous contcat < 20 ms

Indication for

Power supply ON LED, green
Output relays ON LED, yellow (flashing when

timing)

Environment (EN 60529)

Degree of protection IP 20
Pollution degree 3 (DMC01), 2 (PMC01)

(IEC 60664)
Operating temperature -20 to 60 °C, R.H. < 95%
Storage temperature -30 to 80 °C, R.H. < 95%

Housing dimensions

DMC01C 22.5 x 80 x 99.5 mm
DMC01D 45 x 80 x 99.5 mm
PMC01 36 x 80 x 94 mm

Weight 120 to 260g depending on

model

Screw terminals (DMC01)

Tightening torque Max 0.5 Nm according to

IEC EN 60947

Approval UL, CSA
CE Marking Ye s
EMC Electromagnetic Compatibility

Immunity According to EN 61000-6-2
Emission According to EN 61000-6-3

Timer Specifications According to EN 61812-1

Function/Range/Time Setting

Adjust the function setting
the DIP switches 1 to 6 as
shown below (1 to 4 for
DMC01Cxxx).

Note 1: DIP switch 5 must
be kept ON when using
PMC01Dxxx.

Note 2: DIP switch 6 does
not have any effect on the
PMC01Cxxx working mode.

To access the DIP switches
open the grey plastic cover
using a screwdriver as
shown below.

Upper knob:

Selection of function:
Op - Delay on operate,

manual start

Oa - Delay on operate,

automatic and manual
start

In - Interval, manual start
Ia - Interval, automatic

and manual start

Nr - Interval with no time

reset, manual start

Na - Interval with no time

reset, automatic and
manual start

Dr - Delay on release

Centre knob:

Time setting on relative

scale: 1 to 10 with respect
to the chosen range.

Lower knob:

Setting of time range

External potentiometer
(DMC01D, PMC01C):

Time setting on relative
scale: 1 to 10 with respect
to the chosen range.

Output Specifications

Output 1 or 2 x SPDT relay
Rated insulation voltage 250 VAC (RMS)
Contact Ratings (AgSnO

2

)µ

Resistive loads AC 1 8 A @ 250 VAC

DC 12 5 A @ 24 VDC

Small inductive loads AC 15 2.5 A @ 250 VAC

DC 13 2.5 A @ 24 VDC

Mechanical life ≥ 30 x 106operations
Electrical life ≥ 10

5

operations

(at 8 A, 250 V, cos ϕ = 1)

Operating frequency < 7200 operations / h
Dielectric strength

Dielectric voltage 2 kVAC (RMS)
Rated impulse withstand volt. 4 kV (1.2/50 µs)

Sensor type selection

ON ON OFF OFF: PNP/NPN sensor,

Open collector
or contact

OFF OFF ON ON: Namur sensor

Time setting (DMC01D and PMC01C)

ON: Centre knob on front
OFF: External trimmer

Second relay

ON: Instantaneous
OFF: DPDT

DMC01D,
PMC01C,
PMC01D

DMC01C