YUNJI INTELLIGENT TECHNOLOGY K9 User Manual

Smart Phone 
K9
Pro ximit y Senso r
To uch s creen
Rec eiver
Fron t Camer a
USB Po rt spe akerMicr opho ne
Car d slots
K9
600 0mAh
7.12 ” HD IPS Touc hscre en Blue B lack
TM
And orid
9 Pie
8*Co rtex- A53 up to 2 .3GHz Medi aTek Heli o P35 Soc 4GB 64GB
6000 mAh5V/ 6A charg e
1600 MP+0. 3MP son y imx29 8 8.0M P, 69 wide an gle F/2. 0,Dua l camer a
1/2/4/5/8
4G: FDD1/2/3/4/5/7/8/19/20 TDD40
FM : Support
177. 6mm
86.3 mm
8.9m m
232. 2g
MANU FACTU RER NAME SHEN ZHE N YUNJI INTEL LIGE NT TECHN OLOG Y CO.,LTD MANUFA CTURE R ADDRE SSA-SI DE A2 BUI LDING 2 /F ENET N EW INDU STRIA L PARK,NO .20 DA FU IN DU ST RI A L ZO NE , A OB EI CO MM U NI TY, GU AN LA N, LO NG HU A N EW DISTR ICT,SHE NZHEN C HINA 
1*w arran ty card 1*O TG line
1*C lip 1*H eadph one pul l cord
Telec amera
Slo t per sch ede
K9
600 0mAh
7.12 ” HD IPS Touc hscre en Blue B lack
TM
And orid
9 Pie
8*Co rtex- A53 up to 2 .3GHz Medi aTek Heli o P35 Soc 4GB 64GB
6000 mAh5V/ 6A charg e
8.0M P
F/2. 0
1/2/4/5/8
4G: FDD1/2/3/4/5/7/8/19/20 TDD40
8.0M P, 69
FM : Support
177. 6mm
86.3 mm
8.9m m
232. 2g
NOME DEL PRODUTTO RESHEN ZHEN YUNJI TECHNO LOGIE INTEL LIGEN TE CO, LTD INDIR IZZO DE L PRODU TTOREA -SIDE A 2 BUILD ING 2 / F ENE T NUOVO PARC O INDUS TRIAL E, NO.20 DAFU INDU STRIA L ZONE , AOB EI CO MMUNI TY, GUAN LAN, LONGHU A NEW DIST RICT, SHENZ HEN CHI NA
1* Ca rica ba tteri e
1* Li nea OTG
1 * Cav o per cuff ie 1 * Ago de lla car ta
Karte nstec kplat z
K9
600 0mAh
7.12 ” HD IPS Touc hscre en Blue B lack
And orid
9 Pie
8*Co rtex- A53 up to 2 .3GHz Medi aTek Heli o P35 Soc 4GB 64GB
6000 mAh5V/ 6A charg e
1600 MP+0. 3MP son y imx29 8 F/2. 0
1/2/4/5/8
4G: FDD1/2/3/4/5/7/8/19/20 TDD40
8.0M P 69
FM : Support
177. 6mm
86.3 mm
8.9m m
232. 2g
HE RS T EL LE R NA ME S HE NZ H EN Y UN J I I N TE LL I GE NT T EC H NO LO G Y C O ., LT D HERST ELLER ADRES SEA-SI DE A2 BUI LDING 2 / F E NET NEU ER INDU STRIA L PARK, NO. 20 DAFU INDUS TRIAL ZONE, AOBE I COMMU NITY, GUA NLAN, LONGH UA NEU ES BEZI RK, SH ENZHE N CHINA
1*O TG-Lin ie
1*Ga ranti ekart e
1*K opfhö rer-K abel 1*K arten nadel
Слот для карты
K9
600 0mAh
7.12 ” HD IPS Touc hscre en Blue B lack
And orid
9 Pie
8*Co rtex- A53 up to 2 .3GHz Medi aTek Heli o P35 Soc 4GB 64GB
6000 mAh5V/ 6A charg e
1600 MP+0. 3MP son y imx29 8 F/2. 0
1/2/4/5/8
4G: FDD1/2/3/4/5/7/8/19/20 TDD40
FM : Support
177. 6mm
86.3 mm
8.9m m
232. 2g
8.0M P 69
Чех ол смар тфона
1*гар антий ный тал он
1*Линия OTG
1*Кабель наушников
1*Игольная карта
Ran ura par a tarjet a
K9
600 0mAh
7.12 ” HD IPS Touc hscre en Blue B lack
And orid
9 Pie
8*Co rtex- A53 up to 2 .3GHz Medi aTek Heli o P35 Soc 4GB 64GB
6000 mAh5V/ 6A charg e
1600 MP+0. 3MP son y imx29 8
F/2. 0
1/2/4/5/8
4G: FDD1/2/3/4/5/7/8/19/20 TDD40
8.0M P 69
FM : Support
177. 6mm
86.3 mm
8.9m m
232. 2g
NOMBR E DEL FABRIC ANTESH ENZHE N YUN JI IN TELLI GENT TECHNO LOGY CO ., LTD DIREC CIÓN DEL FAB RICAN TEA-SIDE CON STRUC CIÓN A2 2 / nuevo pa rque F ENET INDUS TRIAL , NO.20 D afu IND USTRI AL ZONE, A obei CO MUNID AD, Guan lan, LO NGHUA nu evo distr ito, SHE NZHEN C HINA
1*L ínea OTG
1*C able de a uricu lares 1*A guja de l a tarje ta
Fent e pou r carte
K9
600 0mAh
7.12 ” HD IPS Touc hscre en Blue B lack
And orid
9 Pie
8*Co rtex- A53 up to 2 .3GHz Medi aTek Heli o P35 Soc 4GB 64GB
6000 mAh5V/ 6A charg e
1600 MP+0. 3MP son y imx29 8 F/2. 0
1/2/4/5/8
4G: FDD1/2/3/4/5/7/8/19/20 TDD40
8.0M P 69
FM : Support
177. 6mm
86.3 mm
8.9m m
232. 2g
NOM DU FABR ICA NTSH ENZ HEN YU NJI TE CHN OLOG IE INT ELL IGE NTE CO, LTD ADRES SE DU FABRI CANTNOUVEAU PARC IND USTRI EL A2 / F ENET A2, FAC E AU ZONE INDUS TRIEL LE NO.2 0, COMM UNAUTÉ A OBEI, G UANLA N, NOUV EAU DIST RICT DE LO NGHUA , SHENZ HEN CHI NA
1*L igne OT G
1* Car te de Gar antie
1* Câ ble cas que 1* Aig uille d e carte
 
+
600 0mAh
K9
HD IPS Tou chscr een “7. 12
Blue B lack
And orid
8*Co rtex- A53 up to 2 .3GHz Medi aTek Heli o P35 Soc
8.0
9 Pie
4GB 64GB
نﺣ اوﺷ 5V /6A
MP16 00+MP 0.3 son y imx29 8
6000
F/2. 0
نﺎﻣﺿ ﻟا ﺔﻗﺎ طﺑ

ةإ  
FDD1/2/3/4/5/7/8/ 19/20 TDD40 :4G
1/2/4/5/8 8
Support : FM
177. 6
86.3
OT G
سأا ت 
232. 2
8.9
スロッ ト
K9
600 0mAh
7.12 ” HD IPS Touc hscre en Blue B lack
And orid
9 Pie
8*Co rtex- A53 up to 2 .3GHz Medi aTek Heli o P35 Soc 4GB 64GB
6000 mAh5V/ 6A
1600 MP+0. 3MP son y imx29 8 F/2. 0
1/2/4/5/8
4G: FDD1/2/3/4/5/7/8/19/20 TDD40
FM : Support
177. 6mm
86.3 mm
8.9m m
232. 2g
保証書
1* OT G
8.0M P 69
1* は りが ね 1* ヘ ッド フォ ン の配 線
Manufacturer's Name: SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO.,LTD
Address: A-SIDE A2 BUILDING 2/F ENET NEW INDUSTRIAL PARK,NO.20 DAFU INDUSTRIAL ZONE,
AOBEI COMMUNITY, GUANLAN, LONGHUA NEW DISTRICT,SHENZHEN CHINA
Product name : Smart Phone
Model number: K9
Operating Temperature: -10° C to 40° C
This device was tested for typical body-worn operations. To comply with RF exposure
requirements, a minimum separation distance of 0mm must be maintained between the user’s
body and the handset, including the antenna. Third-party belt-clips, holsters, and similar
accessories used by this device should not contain any metallic components. Body-worn
accessories that do not meet these requirements may not comply with RF exposure
requirements and should be avoided. Use only the supplied or an approved antenna.
This device in compliance with the essential requirements and other relevant provisions of
Directive 2014/53/EU. All essential radio test suites have been carried out.
1. Use careful with the earphone maybe possible excessive sound pressure from earphones
and headphones can cause hearing loss.
2. CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF
USED BATTERIES ACCORDING TO THE INSTRUCTIONS
3.The product shall only be connected to a USB interface of version USB 2.0
4. Adapter shall be installed near the equipment and shall be easily accessible.
5. The plug considered as disconnect device of adapter
6. The device complies with RF specifications when the device used at 0mm form your body
RF POWER
Function
Operation Frequency
Max RF outputpower:
Limit
BLE
2402MHz–2480MHz
9.91dBm
20 dBm.
BT(BR+EDR)
2402MHz–2480MHz
5.42 dBm
20 dBm.
WIFI 802.11B/G/N(HT20,HT40)
2.4G
802.11b/g/n(20MHz): 2412~2472MHz;
802.11n(40MHz):2422~2462MHz
15.6dBm
20 dBm.
GSM/GPRS/EDGE 900
TX(Uplink):880M915MHZ;
RX(Downlink):925M960MHZ
GSM 900:31.82dBm
GPRS 900:32.04dBm
EGPRS 900:25.76 dBm
class 4 (33±3dBm)
GSM/GPRS/EDGE 1800
TX(Uplink):1710M1785MHZ;
RX(Downlink):1805M1880MHZ
GSM 1800:28.62dBm
GPRS 1800:28.51dBm
EGPRS 1800 25.93 dBm
class 1 (30±3dBm)
WCDMA B1
TX(Uplink):1920-1980MHz;
RX(Downlink):2110-2170MHz
22.58dBm
24 (dBm) +1,7/-3,7 (dB)
WCDMA B8
TX(Uplink): 880-915MHz;
RX(Downlink):925-960MHz
23.17dBm
24 (dBm) +1,7/-3,7 (dB)
LTE FDD B1
TX(Uplink):1920-1980MHz;
RX(Downlink):2110-2170MHz
23.62dBm
+/-2,7(dB)
LTE FDD B3
TX(Uplink) :1710-1785MHz;
RX(Downlink):1805-1880MHz
23.56 dBm
-2,7(dB)
LTE FDD B7
Uplink: 2500 MHz to 2570 MHz
Downlink: 2620 MHz to 2690 MHz
23.00 dBm
-2,7(dB)
LTE FDD B8
Uplink: 880MHz to 915 MHz
Downlink: 925 MHz to 960 MHz
22.75 dBm
-2,7(dB)
LTE FDD B20
Uplink: 832 MHz to 862 MHz
Downlink: 791 MHz to 821 MHz
22.93 dBm
-2,7(dB)
Uplink & Downlink: 2300 MHz to 2400 MHz
23.32 dBm
-2,7(dB)
This product can be used across EU member states.
LTE TDD B40
FCC
15.19 Labeling requirements. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
15.21 Information to the user. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
15.105 Information for the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connecting the equipment to a socket on a circuit different from that to which the receiver is connected.
-Contact with the provider or a radio / TV technician for help. Specific absorption rate (SAR):
This mobile phone meets the government's requirements for exposure to radio waves. The guidelines are based on standards developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a margin of safety designed to ensure the safety of all people regardless of their age or health.
The FCC Statement of Exposure to RF and the SAR limit for the United States (FCC) is 1.6 W / kg average for each gram of tissue. This device was tested for typical operations of use on the body, with the back of the phone at 1.0cm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a distance of 1.0 cm between the user's body and the back of the phone. The use of belt clips, covers and similar accessories must not contain metallic components in their assembly. The use of accessories that do not meet these requirements may not meet FCC RF exposure requirements and should be avoided.
Functioning in the body This device was tested for typical operations of use in the body. To comply with RF exposure requirements, a minimum separation distance of 1.0 cm must be maintained between the user's body and the telephone, including the antenna. Third-party accessories such as belt clips, covers and similar accessories used with this device should not contain metallic components, accessories that do not meet these RF exposure requirements and should be avoided from use on the body. Use only the supplied antenna or an approved antenna.

(€ Hs

Loading...