H02
GPS ANTI-THEFT ALERT SYSTEM
(GPS+GSM+SMS/GPRS)
Fast Installation Instruction & User Manual
In order to install and operate the GPS tracker in right method and properly, please read
this Fast Installation Instruction & User Manual before installation, Thank you.
Catalog
A. H02 Models.......................................................................................................................... 2
B. Package & Accessories....................................................................................................2
C. Functions..............................................................................................................................2
D. Technical Parameter..........................................................................................................2
E. LED Indication.........................................................................................................................2
1. Red LED (Power status indication)...............................................................................2
2. Yellow LED (GSM status indication)............................................................................. 2
3. Blue LED (GPS status indication)................................................................................. 2
F. Device Appearance................................................................................................................2
G. Installation Instructions................................................................................................... 2
1. Before Installation..............................................................................................................2
2. Installation............................................................................................................................2
H. Terminal wiring Instructions........................................................................................... 2
I. Terminal Operations.............................................................................................................. 2
1. Start-up/Shut-down........................................................................................................... 2
2. Terminal parameters settings......................................................................................... 2
Cellphone SIM Card Number Binding...................................................................... 2
Password Modification................................................................................................. 2
Get Terminal Position by SMS....................................................................................2
Google Address Link.................................................................................................... 2
Vibration Alarm...............................................................................................................2
Engine Control (Optional)............................................................................................2
SOS Alarm(Optional).....................................................................................................2
Main Power Cut-Off Alarm(Optional)........................................................................ 2
Voice Monitoring(Optional)......................................................................................... 2
J. Live Tracking Monitoring Platform....................................................................................2
K. Trouble Shooting................................................................................................................2
GPS VEHICLE TRACKING TERMINAL WARRANTY CARD................................................ 2
A. H02 Models
H02 Normal Version – Real-time Tracking, Vibration Alarms;
H02 Upgrade Version – Real-time Tracking, Vibration Alarms, Voice Monitoring;
H02 Enhanced Version – Real-time Tracking, Vibration Alarms, Cut-off Engine
or Oil pump;
H02 Multi-function Version – Real-time Tracking, Vibration Alarms, Voice
Monitoring, Cut-off Engine or Oil pump, SOS Emergency Alarms, External Power
Cut Alarm;
Model
Function
H02
Real-Time Tracking + Vibration Sensor
H02-U
Real-Time Tracking + Vibration Sensor + Microphone
H02-E
Real-Time Tracking + Vibration Sensor + Relay
H02-M
Real-Time Tracking + Vibration Sensor + Microphone +
Relay+ SOS Button + Battery
B. Package & Accessories
2/4 Pin Power Cord *1; User Manual *1;
Microphone*1 (Optional); Relay *1 (Optional); SOS Button *1 (Optional);
Battery*1 (Optional);
C. Functions
GSM Quad-band frequency (Global use);
Wide input voltage range: DC 9-24V;
Build-in vibration sensor, Smart Anti-theft ;
ACC ignition detection, vehicle status notification;
External SOS button, used in immergence case use;
External Relay, used to cut off engine power or oil remotely;
External Microphone, used in voice monitoring case (Optional);
Build-in back-up battery, support illegal main power cut-off alarms (Optional);
Support OBD easy installation (Optional);
D. Technical Parameter
GMS frequency: 900/1800MHz or 850/1900MHz;
GPRS: Class12,TCP/IP;
Voltage range: DC 9-24V;
Standby Current: ≈0.2mA;
Power Consumption: 0.3w/h;
GPS initialization: Cold boot 38s (Open sky)
Warm boot 2s (Open sky)
GPS Accuracy: 10m(2D RM);
Working Temperature: -2℃ - +70℃；
Working Humidity: 20%-80%RH;
Dimension: 90.0(L)*45.0(W)*6.0(H)mm;
Net weight: 45g;
E. LED Indication
1. Red LED (Power status indication)
LED Status
Indication
Quick flashing, On 0.1s, off 0.1s
Low power warming
Constantly on
Charging
Slow flashing, On 0.1s, off 2s
Battery Charged/Working Normal
Constantly off
Voltage too low/ Shut down
2. Yellow LED (GSM status indication)
LED Status
Indication
Slow flashing, On 15s
GSM initialization
Quick flashing, On 0.1s,off 2s
GSM signal receive normal
Constantly on
GSM calls/GPRS start
Constantly off
No GSM signal received
3. Blue LED (GPS status indication)
LED Status
Indication
Flashing, On 0.1s, off 0.1s
GPS signal normal
Constantly on
GPS signal searching
Constantly off
GPS shut down
F. Device Appearance
H02
H02-U
H02-E
H02-M
G. Installation Instructions
1. Before Installation
Open the package, please look over whether the part number is correct and
whether accessories complete, if not, please contact your distributor for further
assistance;
Choose correct SIM card, a SIM card will be needed to insert into the terminal,
please consult distributors options for further use;
Install SIM card, SIM card slot On the terminal back, take out the SIM card slot
cover, insert the SIM card, then put the cover back to terminal;
Please Note:
Power off before SIM card operations;
Please make sure that the SIM card has enough credit;
Special GPRS data SIM Card suggested (GSM network only);
2. Installation
The terminal is a high-tech GPS positioning device, choose distributor suggested
professional installation company, mechanic to install and set-up;
Please follow the terminal installation order, DO NOT REVERSE, during the
installation, DO NOT POWER UP THE TERMINAL;
Suggest install in hidden places;
Please Note:
In order to keep it from theft’s damage, hidden place installation suggested;
Please avoid to install along with or near transmitter, ie: Reversing radar, other
anti-theft vehicle terminals;
Use ribbons to fasten the terminal, or strong double-faced adhesive tape;
The GSM and GPS antennas’ signal receiving side shall face the sky, and no
shield materials to block the signal, ie: metal; Also it shall avoid to interfere
signals, 2 antennas separate installation suggested;
Installation place suggested:
a) Within front decorated board under windshield;
b) Under Dashboard (avoid metal cover);
c) Within back decorated board under windshield;
Please Note:
Any metal heat shield layer or heating layer will reduce the signal of GPS, it may
cause GPS function failure, please adjust the installation place;
H. Terminal wiring Instructions
H02
H02-U
H02-E
H02-M
1. Power wire, ACC detection wire, Engine power or oil control relay wire (7pin)
The terminal standard power voltage is 9V-24VDC, please use the original power
wire supplied by the original factory, red wire is power source positive end, black
wire is the negative end; The black wire be connected with spate ground wire, DO
NOT CONNECT WITH OTHER GROUND WIRES;
Yellow AAC detection wire, the ACC wire shall connected with the ACC switch,
the terminal will decide vehicle status by ACC status, engine on or engine off,
also determines the terminal data upload time interval, engine on status:
15seconds, engine off status: 5 minutes;
Engine control relay wiring
Oil pump relay connections: ignition coil with small white wire (85) and small
yellow wire (86), small white wire (85) connects with the vehicle power source
negative end, small yellow wire (86) connect with the terminal relay control wire;
The controlled vehicle oil pump, cut the oil pump positive wire, the oil pump
positive end shall connect with the thick green wire (87a) which is the normally
closed end, the another end connect with the relay public end the thick green wire
(30);
SOS wire (2 pin)
Connect with the external SOS switch button, used in emergency case for help;
Loudspeaker wire (1 pin)
Connect with the external vehicle speaker, with a microphone, it can make 2
ways phone calls, or send voice alarms when theft behavior was detected;
MIC wire (1 pin)
Connect with external microphone, used in voice monitoring case or phone calls;
2. After finished all wires connection, please connect with the power supply;
3. Hidden installation, please choose original main power wire, a fuse block (2A
protective tube) on the red wire end will protect the terminal from short circuit;
I. Terminal Operations
1. Start-up/Shut-down
Start-up: insert the SIM card, turn on back-up power supply, the terminal will start
up;
Shut-down: disconnect power plug, take out the SIM card, the terminal will shut
down;
2. Terminal parameters settings
All beginning letters in each parameters’ commands shall use upper-case letters,
all punctuations shall be English punctuation, only part of commands will reply.
By sending enquiry commands to the terminal, corresponding contents will be
replied.
Commands shall be sent by the bound cellphone number.
Cellphone SIM Card Number Binding
After the terminal start up normally, please bind your cellphone number first,
alarms will send to this bound number.
Send SMS: *ZC#terminal password# Cellphone SIM card number#Terminal
SIM card number#
Initial password is 000000, command start with *
e.g.: *ZC#000000#15888185569#12345678922#
Password Modification
Send SMS: *MP#Previous terminal password#new terminal password# (6
numbers)
e.g.: *MP#000000#987654#
Initial password is 000000, new password is 987654
Get Terminal Position by SMS
Send SMS: DW to terminal, it will reply the terminal current geography location
e.g.: south east 30 meters, ABC company, Meilong Rd, Shenzhen, Guangdong
Province,China.
Google Address Link
Send SMS: GOOGLE to terminal, it will reply the terminal current geography
location link
http://maps.google.com/maps/?f=q&hl=en&&q=31.237395,121.390373333333;S=
0;D=2012-5-23 12:00:00;D=0
Please note: the default time is Greenwich time, actual time needs to add your
time zone number
e.g.: enquiry time is 12:00:00, Chinese time is 20:00:00 (+ 8 hours)
Vibration Alarm
Send SMS: SF to turn on the vibration alarm
Send SMS: CF to turn off the vibration alarm
No spaces.
Engine Control (Optional)
When the vehicle was stolen, the administrator can send Cut-off Engine
command via the live tracking monitoring system, Under the conditions of safe
driving, the command will trigger the relay to cut off power of oil pump to stop the
engine, and it can’t be re-start the engine without restore engine command.
To secure the safety of vehicle, the terminal shall in valid GPS signal status, also
speed under 20km/h or still status to cut off engine.
After the theft alarm dismissed, send restore engine command via live tracking
monitoring system will trigger relay to restore the power of oil pump, the vehicle
will able to start up.
Cut off oil pump power
Send SMS: DYpassword to terminal, and reply: Config ok
Restore Oil pump power
Send SMS: TYpassword to terminal, and reply: Config ok
Intial password is 000000
e.g.: DY000000,TY000000
SOS Alarm(Optional)
Any emergency case happens, press the SOS button for 3 seconds, trigger the
SOS emergency help alarm, the terminal will call the bound cellphone number
repeatedly, in nobody answers case, it will ring max 3 times, at meantime, the
terminal will upload SOS alarm information to live tracking monitoring system.
Main Power Cut-Off Alarm(Optional)
After the terminal main power been cut, it will automatically trigger power cut off
alarm, it will send a main power cut off alarm SMS to bound cellphone, and
meanwhile upload the alarm information to live tracking monitoring system.
SMS e.g.:
Alarm main power failure, Please pay attention!
Voice Monitoring(Optional)
Send SMS: JT to the terminal
The terminal will call back and the administrator will able to monitor the voices.
J. Live Tracking Monitoring Platform
Web Address:
http://www.gps588.com/
Language Available:
English, 中文, Español, Français, Português, Deutsch, ﺔﯾﺑرﻌﻟا, Vietnamese,
ภาษาไทย, Pусски.
If you already have a login account and password information, you can login our
platform directly, or please contact your distributor and ask them to open you an
account and provide you the password.
Input the address link in your computer browser, input the account and password,
then login to your service platform.
About the use method of platform, please ask your distributor for Service Platform
User Manual.
K. Trouble Shooting
1. Terminal installed at the first time, and it can’t connect to service platform,
platform always shows offline.
3. Is main power correct? Do not connect it with the vehicle internal control wires;
4. SIM card installation right, please check the installation instruction;
5. Is ACC wire connected? After connected with ACC wire, insert the key and open
ACC;
6. Check the LED indicators, When the terminal work normally, Red LED (GSM)
flash slowly, Green LED (GPS) flash slowly;
7. Is GPS module receives GPS signal? If not, please take it to open sky and wait
the first positioning is done;
2. Terminal Shows offline
First check the 2 LED indicators and confirm if it is normal, if it is inconvenient to
check the LEDs, then check the SIM card status first, steps as follow:
Call the terminal SIM card number, and see if you can hear the get through sound;
Is vehicle parked in the basement or other places without GSM signal;
Monitoring the offline area, is signal one offline or all of them, then we can decide
whether it is a telecom operator problem;
SIM card credit run out?
GPRS service opened?
3. If the GPS function has been activated, and didn’t position the location for a long
time, then we shall check the following status:
When mechanic install the terminal, the GPS antenna signal receive side shall up
to sky;
Terminal installation place shall have no metal or other material shield which
absorbs electromagnetic wave, also please pay attention that the up-area of
terminal shall not stick any rupture film or heat shield film, cause these films
contains a very high level of metal additive, it will absorb electromagnetic wave, in
this case, the GPS signal will reduced by a large degree which causes lower the
position accuracy, in some seriousness, it might cause the positioning function fail;
4. If the terminal is in the GPS signal weak area (High buildings can block GPS
signal), please drive the vehicle to open sky area to position the location, first
positioning usually take 1-2 minutes;
5. When GSM signal receive abnormally, please check whether the SIM card in
terminal SIM card slot installed correctly, or whether the parking pot was covered
with GMS signal, some place like basement usually have no or weak GSM signal,
please drive the vehicle to places covered with GSM signal;
6. When the bound cellphone receives the main power cut-off alarm, please confirm
if it is a illegal wire cut, or check the fuse box on power wire please, if the fuse
burn out, contact your distributor for the same part number fuse please, after
checking terminal problems, re-power the terminal to work status;
GPS VEHICLE TRACKING TERMINAL WARRANTY CARD
Please Note:
Any upgrade of this products later on , notifications will only be sent to
distributors;
Any changes on appearance or colour, pictures are only for information,
take practicality as standard;
The warranty card only suits the following IMEI terminal;
Please keep the warranty card safe, also show the warranty card and
original purchase receipt before repair services;
Specific warranty range as follow;
This warranty card is a basic access to repair service, please fill out the table
carefully and keep it safe.
User Name
Contact phone
No.
Contact Adress
Part Number
IMEI Number
Purchase Date
Receipt Number
Distributor Name
Distributor Address
Distributor Phone
1. From Purchase date, 1 year repair service for products crash due to
products reason .
2. Any of following situations are not included in warranty range, but provide
paid repair services.
Warranty period expired;
Damages caused by unauthorized tear down or repair;
Inundate, damage, PCB burnt due to improper act;
Terminal out cover, screen, antennas damages due to use;
Terminal inside IMEI’s been pluck away or unable to read;
Warranty card any content is not in accordance with the terminal, or
warranty card has been modified by unauthorized;
Damages caused by force majeure;
Loading...