Yujin Robot Iclebo smart User Manual
YCR-M04-01
Robot Cleaner
User Manual
Please read ‘Safety Precautions’ before use. This User Manual includes Product warranty.
Model Name
Color
Size
Weight
Speed
Charging time
Using time
Battery
Noise Level
Energy consumption
(Battery 4S1P)
Iclebo smart
Champagne Silver
D : 35cm , H : 10cm
3.9kg
30cm /sec
About 2 hours
Maximum 70 minutes
Lithium Ion
60dB
Charging : 41.8 Watt
Standby : 1 Watt under
#1214, Namsung Plaza, 345-30, Gasan-dong, Guemcheon-gu, Seoul, Corea
TEL. +82-2-2026-1430 FAX. +82-2-2026-1440
www.iclebo.com/english , www.yujinrobot.com/english
1
Safety Precautions
Components and
detailed names
Reference
Installation of robot cleaner
Usage of robot cleaner
Product control &
maintenance
Storage
Check before repair report
Display error message
Warranty
Details for best cleaning
Operating principles of robot cleaner
• Running of robot cleaner
• Suction of robot cleaner
• Using remote control
• Necessary information
Check list before using
• Insert battery
• Assemble side-brush
• Assemble ultra microfiber mop
• Remove protection film
• Insert remote control battery
Check list before cleaning
• Install Charging station
• Charging
• Time setting
• Cleaning space preparation
Using the robot cleaner
• Start / stop cleaning
• Using move, charge, turbo function
Cleaning mode
• Auto-mode
• Carpet mode
• Climb mode
• Mopping mode
Timer cleaning
Empty dust bin
Filter cleaning
Change antibacterial filter
Ultra microfiber mop control
Main brush cleaning
Sensor control
Front-wheel cleaning
Side-brush cleaning
Mend the robot cleaner
Mend the Charging station
2
5
6
7
8
9
11
12
12
13
17
18
19
20
● contents
2
This content is for the user’s safety and
to prevent any property loss.
Read the below carefully and use it with care.
- Do not force to bend the power cord or pressure it with heavy weight.
It may cause electric shock or fire.
- Keep the pin and interface of the power plug clean from dust or water.
It may cause malfunction or electric shock.
- Do not pull the power cord or touch the power plug with wet hands.
It may cause electric shock or fire.
- Do not use damaged power plug or power cord, loose outlet.
It may cause electric shock or fire.
- In case the water went inside the product, you must contact service center
for check-up even the product was dried thoroughly.
- Do not put or pull the power plug consecutively.
It may cause electric shock or fire.
- In case of direct charging with adapter, connect the adapter
to the charging socket of robot cleaner properly.
It may cause electric shock or fire.
Users must be aware of necessary details
for using this product.
Users must follow the instructions
to avoid serious injury or death.
Users must follow the instructions
to avoid light injury or product damage.
Prohibition
Warning
Caution
Precautions related to power
● Safety precautions
3
- Do not touch the power cord of the charger with wet hands.
It may cause electric shock.
- Arrange the cable or wire before use to avoid being wrapped
with cable or wire.
It may cause fire or electric shock due to damaged cable.
- Remove light objects or fibers before use.
It may cause barrier or object damage while using.
- Remove small or fragile objects from the cleaning area before use.
Fragile pottery or glass product must be removed.
Remove coins or expensive jewelries before cleaning.
- Clean the objects on the floor.
Thin towel, pad, power cord, table cloth, belt placed in front of the bathroom,
sink, entrance, utility room may get tangled with the wheel. Also, objects
on the table or dining table may fall down.
- Empty the dust bin before operating the robot cleaner.
Suctioning function may not perform well if dust bin is full.
- Check the main components such as antibacterial filter,
brush and dust bin are assembled properly before cleaning.
In case you operate the robot cleaner without the main components such as
antibacterial filter or brush, it won’t clean and it may cause breakdown.
- Do not operate robot cleaner when children or pets are left alone.
Robot cleaner may draw attention from children or pets.
It can cause injury when you get stuck on the wheel.
If the robot cleaner is distracted while cleaning, it will recognize it
as a barrier and certain areas may not be cleaned.
- Do not expose the power cord on the floor when installing charging station.
Robot cleaner may drag the power line while auto-charge or cleaning.
- Keep the top of the charging station away from water.
It may cause electric shock or fire.
Precautions before using
● Safety precautions
4
- In case the robot cleaner has unusual sound, smell or smoke, separate
the battery immediately and block the power switch then contact your local
customer center.
It may cause electric shock or fire.
- Do not use the robot cleaner on the table or any place high.
It may damage the product.
- In case of particular hardwood floor, scratch or damage may occur
while using the product according to its material. Stop using in this case.
- In case plastic bin or big foreign substance was suctioned, remove it immediately.
It may cause serious damage to the robot cleaner when it’s used
for a long period with its suction duct clogged.
- Transfer the robot cleaner to other area when it’s blocked by threshold
of the entrance or porch while operating.
- Prevent the robot cleaner from suctioning liquid materials.
- Do not use the robot cleaner near flammables such as cigarette,
hot materials or gasoline.
It may cause fire.
- Do not use it for outside.
- In case foreign substance is stuck on the sensor part, it may malfunction.
Please clean the sensor regularly.
- In case of cleaning the foreign substance,
turn OFF the power switch then use cleaning brush to remove.
If the robot cleaner operates all of the sudden, it may cause injury
or serious damage to the product.
- In case the robot cleaner or components are destroyed,
contact the manufacturer or service center for check-up.
It may cause electric shock or fire.
- In case of mending the charging station, pull out the power plug first
for safety reasons.
- Battery is dangerous for explosion possibility.
Do not dispose in to flammables or dismantle.
It may cause fire.
- Do not spray water directly or wipe the robot cleaner with volatile materials
such as benzene, thinner or alcohol when mending the product.
- Do not force to press or pressure the bumper.
In case the bumper sensor is damaged, it may crash on the wall or with furniture.
- Do not disassemble, repair or convert the product except
for the assigned service staff from our company.
It may damage the product.
Precautions while using
Precautions after using
● Safety precautions
5
Components
Detailed names of each parts
Robot cleaner Charging station
(Spare double-sided
tape for floor fixing)
Remote control
(included battery)
Side-brush(R)
Side-brush(L)
Antibacterial filter
Cleaning brush Battery
Power adapter Mop plate
Ultra microfiber wet mop
User Manual
● Top of the robot cleaner
● Bottom of the robot cleaner
Power button
Camera
Mode button
Start/Stop button
Power display lamp
Lid
Cleaning brush
Manual charging jack
Bumper
Barrier sensor
Motor protection filter
brush
/mop
plate
fixed clip
Main
brush
Wheel
Main
brush
cover
Front wheel
position
Front wheel
Front wheel
fixed cover
Lithium ion battery
Charging
terminal
Fixed pin for
side-brush
Side-brush
Floor detection
sensor
Floor
detection
sensor
On/OffswitchOn/Offswitch
● Components
6
● Charging station
● Remote control ● Display screen
● Dust bin
Adapter
terminal
Power line holder
Generating part of
Infrared leading signal
Infrared generator
Charging display
Charging terminal
Floor
fixing
tape
Dust
bin
Dust bin handle
Blade
Filter
Antibacterial/
Electrostatic filter
Filter
case
Turbo
mode
Operation
status
Clock/
cleaning
time
Carpet
mode
Climb
mode
Timer
status
Auto
mode
Mopping
mode
Battery
status
Error
information
Details for best cleaning
Please follow the instructions below for high cleaning efficiency.
- Empty the dust bin after using the robot cleaner.
- Close the door to separate the areas for cleaning.
- Remove all the non-fixed objects such as toys, magazines or shoes before cleaning.
- Do not lift up or move the robot cleaner manually while operating.
Robot cleaner may lose track of the route and certain areas may not be cleaned.
- Always press the power button to start the robot cleaner and use remote control
to turn off the power. Press Start/stop ( )button to resume cleaning from the start.
Power button
Time setting
button
Start/stop
button
Turbo mode
button
Charge button
Timer button
Cleaning time
setting button
Mode button
Direction button
Enter button
● Components ● Reference
Loading...