User Manual
DXS-W014S 150M Wireless WIFI Module
1
CONTENTS
1. Overview .................... 2
2. Product Feature .................... 2
3. Product Specifications .................... 3
3.1 Function Specifications .................... 3
3.2 Environment conditions .................... 4
3.3 Electrical Characteristics .................... 4
4. Dimensions and PIN definitions ..................... 8
2
1. Overview
Thank you for choosing the wireless WIFI module!
This module---DXS-W014S is an integration of firewall, router, and wire wireless network
connection function. It is designed to fully compliant with IEEE 802.11b/g/n standards.
With multiple encryption mechanism it can guarantee the security of data transmission in
wireless network. It provides security, high-speed, standard-based wireless LAN solution
and is able to quickly process file transfer, video, multimedia and other applications which
require higher bandwidth. It is the best choice for the applications of the set-top box, IP
camera, etc.
2. Product Feature
* Compliant with IEEE802.11 b/g/n standard.
* Security support for data encryption.
* Support high-speed transmitting rate.
* Support soft AP feature and PSP connection mode.
* Automatically detects and adjusts transmitting rate.
* Mini size and pretty designed.
3
3. Product Specifications
3.1 Function Specifications
3.2 Environment conditions
Operating Humidity: 10％～90％ without condensation.
Storage temperature: -40℃～70℃.
Storage Humidity: 5％～90％ without condensation.
Operating temperature: -10℃～70℃.
3.3 Electrical Characteristics
Power Rate: 1.3Watt
Supply Voltage: DC 3.3V, 500mA
4
4. Dimensions and PIN definitions
PIN Function
1 VDD33
2 D3 D+
4 GND
5 GND
6 RF
5
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
The interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference, and This device must accept any interference received, including
interference that may cause undesired operation.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this
equipment. such modifications could void the user’s authority to operate this equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your
body.
Label of the End product
The final end product must be labeled in a visible are with the following “Contains TX FCC ID: 2AEP9-DXS-W014S”.
The FCC part 15.19 statement below has to also be available on the label: This device complies with Part 15 of FCC rules.
Operation is subject to the following two conditions:
(1)The device may not cause harmful interference, and (2) this device must accept any interference received, including
Interference that may cause undesired operation.
A user manual with the end product must clearly indicate the operating requirements and conditions that must be
observed to ensure compliance with current FCC RF exposure guidelines.
Note: If this module is intended for use in a portable device, you are responsible for separate approval to satisfy the SAR
requirements of FCC Part 2.1093.
6
Loading...