SDI2SDIS
User Manual
Rev1.1
Content
Feature .................................................................................... 3
Front Panel ............................................................................... 4
Rear Panel ................................................................................ 4
DipSwitch/LED Control .................................................................. 5
Genlock Mode ............................................................................ 8
Installation ................................................................................ 9
Package Contents ........................................................................ 9
Specifications .......................................................................... 10
Firmware Upload ...................................................................... 11
Update List ............................................................................. 13
SDI Supports HD formats :
720p50 & 60
1080i50 & 60
1080p24, 25, 30, 50 & 60
SDI Support 525i & 625i SD D1 format
SDI support RGB/YUV 4:4:4 Sampled
Auto 3G/HD/SD-SDI detection
Can be split one 3G-SDI displays simultaneously.
Frame rate conversion(1.000/1.001)
External Dipswitch and Usb Configuration
Firmware is upgradable in the field using the integrated USB port
The converter is Plug-and-Play
Feature
Front Panel
NO
Component
Function
1
SDI Output port
(Up/Down
Conversion)
From your SDI Display Device plug into this ports
2
Indicate Box LED
The LEDs are indicate Box configuration
3
Dipswitch
Setting configuration for Box
4
Power Jack
The Power adapter plug into here.
NO
Component
Function 1 Power Jack
The Power adapter plug into here.
2
SDI Input Port
From your SDI Source Device plug into
this ports
3
Sync Input Port
From you external Sync Device plug into
this port
4
USB Connector
Upgrade Firmware/Control Box by PC
1
2
3
4
1
2
3
4
Rear Panel
Loading...