Multi2SDI
BOX
User Manual
Rev1.3
Content
Feature ................................................................................... 3
Front Panel ............................................................................... 4
Rear Panel ................................................................................ 4
Top Panel ................................................................................. 5
Side Panel ................................................................................ 5
Button/LED Indicate .................................................................... 6
Installation ............................................................................. 17
Package Contents ..................................................................... 17
Specifications .......................................................................... 18
Firmware Upload ...................................................................... 19
Appendix Table A ..................................................................... 21
Update List ............................................................................. 22
SDI Supports HD formats :
720p50 & 60
1080i50 & 60
1080p24, 25, 30, 50 & 60
SDI Support 525i & 625i SD D1 format
Auto 3G/HD/SD-SDI detection
Can be split one 3G-SDI displays simultaneously.
Frame rate conversion(1.000/1.001)
External Button Configuration
Firmware is upgradable in the field using the integrated USB port
The converter is Plug-and-Play
Support DVI-D, DVI-A, Component, CVBS and S-Video Input
Feature
NO
Component
Function
1
SDI Output Port
From your SDI Display Device plug into this ports
2
Mode Buttons
Select Format/Output Port
3
Power Jack
The Power adapter plug into here
NO
Component
Function 1 Phone Jack
Form you Audio Device plug into this port
2
Component/CVBS/S-Video
Input Port
From your YPbPr/CVBS/S-Video Device plug
into this port
3
DVI-D/DVI-A Input Port
From your DVI-D/DIV-A Device plug into this
port
1
3
1
3
2
2
Front Panel
Rear Panel
NO
Component
Function
1
Input Source LED
The LEDs are indicate Input source
2
Power and Lock LED
The LEDs is indicate power and signal locked.
3
Main Format LED
The LEDS are indicate output format
NO
Component
Function 1 USB Port
Upgrade firmware/Control Box From PC
1
1
2
3
Top Panel
Side Panel
1. Firmware Mode:
Hold on the 1 and 2 button, the display is showed firmware version on display of
left upper.
FIRMWARE VERSION
0.1.0.1
Pull all button (1, 2 and 3) at same time, the box auto reset to default.
Pull all button 2 to setting audio Mode..
DVI-D
Embadded Audio (Default)
External Audio
Mute
DVI-A
Mute
YPbPr
Composite
External Audio
SVIdeo
2. Default Mode:
Button/LED Indicate
3. Audio Mode
4. Output Format Mode:
Pull button 1 change to format mode, frame rate and Fraction by button 2 and 3.
Button 1
Button 2
Button 3
720x480
59.94i
720x576
50i
1280x720
60p
59.94p
50p
30p
25p
1920x1080
60i
59.94i
50i
60p
59.94p
50p
30p
29.97p
25p
24p
23.98p
720x480 59.94i
1
2
3
Loading...