
Instruction Manual
READ AND SAVE THESE INSTRUCTIONS
CAUTION:
Read and follow all instructions before Operating Fan.
Do not use fan if any part is damaged or missing.
WARNING:
z To Reduce the Risk of Fire or Electrical shock, Do Not Expose to Water or Rain.
z To Reduce the Risk of Fire or Electrical shock, Do Not Use This Fan with Any Solid State
Speed Control Device.
z DO NOT use fan in windows. Rain and moisture may create electrical hazard.
z Unplug fan from outlet when not in use, when moving fan from one location to another or
before cleaning.
1: WIRING DIAGRAM
2: SPECIFICATION (110-127V-60Hz)

3: INSTALLATION DIMENSIONS
[Inch]
4: INSTALLATION METHOD
WARNING: INSTALLATION & ELECTRICAL CONNECTION MUSTBE PERFORMED
BY QUALIFIED TECHNICIAN
1) Accessories:
6sets of (M8×60L) Fastening bolt, Washer, Spring washer, and (M8) Nut
2) Check to ensure the voltage /frequency on rating
label is complied with the local power source
before use.
3) Follow the right diagram for installation position.
4) Coverage height: 99 Inches
(for horizontal air curtain installation).
Installation on concrete wall:
a. Take down INSTALLATION PLATE (Unscrew the fixing screws down the REAR and
take down INSTALLATION PLATE). See Following diagram: