Yorkville Sound ELITE ES200P User Manual
ES200P
OWNER'S MANUAL
MANUEL de L'UTILISATEUR
Yorkville
TYPE: YS1019
i
IMPORTANT SAFETY INSTRUCTIONS
INSTRUCTIONS PERTAINING TO A RISK
OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Read Instructions:
The
Owner’s Manual
before operation of your unit. Please, save these
instructions for future reference.
Packaging:
Keep the box and packaging materials, in case the unit
needs to be returned for service.
Warning:
When using electric products, basic precautions should
always be followed, including the following:
Power Sources:
Your unit should be connected to a power source only of the
voltage specified in the owners manual or as marked on the unit.
This unit has a polarized plug. Do not use with an extension cord or
receptacle unless the plug can be fully inserted. Precautions should
be taken so that the grounding scheme on the unit is not defeated.
Hazards:
Do not place this product on an unstable cart, stand, tripod, bracket or
table. The product may fall, causing serious personal injury and serious
damage to the product. Use only with cart, stand, tripod, bracket, or table
recommended by the manufacturer or sold with the product. Follow the
manufacturer’s instructions when installing the product and use mounting
accessories recommended by the manufacturer.
The apparatus should not be exposed to dripping or splashing
water; no objects filled with liquids should be placed on the
apparatus.
Terminals marked with the “lightning bolt” are hazardous live;
the external wiring connected to these terminals require installation
by an instructed person or the use of ready made leads or cords.
No naked flame sources, such as lighted candles, should be
placed on the apparatus.
Power Cord:
The AC supply cord should be routed so that it is unlikely that it will
be damaged. If the AC supply cord is damaged
OPERATE THE UNIT
Service:
The unit should be serviced only by qualified service personnel.
should be read and understood
DO NOT
.
INSTRUCTIONS RELATIVES AU RISQUE
DE FEU, CHOC ÉLECTRIQUE, OU
BLESSURES AUX PERSONNES.
AVIS:
AFIN DE REDUIRE LES RISQUE DE CHOC ELECTRIQUE,
N’ENLEVEZ PAS LE COUVERT (OU LE PANNEAU
ARRIERE). NE CONTIENT AUCUNE PIECE REPARABLE
CONSULTEZ UN TECHNICIEN QUALIFIE
Veuillez lire le manuel:
Il contient des informations qui devraient êtres comprises avant
l’opération de votre appareil. Conservez S.V.P. ces instructions
pour consultations ultérieures
Emballage:
Conservez la boite au cas ou l’appareil devait être
retourner pour réparation.
Attention:
Lors de l’utilisation de produits électrique,
assurez-vous d’adhérer à des précautions de bases
incluant celle qui suivent:
Alimentation:
L’appareil ne doit être branché qu’à une source d’alimentation
correspondant au voltage spécifié dans le manuel ou tel qu’indiqué
sur l’appareil. Cet appareil est équipé d’une prise d’alimentation
polarisée. Ne pas utiliser cet appareil avec un cordon de
raccordement à moins qu’il soit possible d’insérer complètement les
trois lames. Des précautions doivent êtres prises afin d’eviter que le
système de mise à la terre de l’appareil ne soit désengagé.
Risque:
Ne pas placer cet appareil sur un chariot, un support, un trépied ou une
table instables. L’appareil pourrait tomber et blesser quelqu’un ou subir des
dommages importants. Utiliser seulement un chariot, un support, un trépied
ou une table recommandés par le fabricant ou vendus avec le produit.
Suivre les instructions du fabricant pour installer l’appareil et utiliser les
accessoires recommandés par le fabricant.
Il convient de ne pas placer sur l’appareil de sources de flammes
nues, telles que des bougies allumées.
L’appeil ne doit pas être exposé à des égouttements d’eau ou des
éclaboussures et qu’aucun objet rempli de liquide tel que des vases
ne doit être placé sur l’appareil.
Les dispositifs marqués d’une symbole “d’éclair” sont des parties
dangereuses au toucher et que les câblages extérieurs connectés à
ces dispositifs de connection extérieure doivent être effectivés par un
opérateur formé ou en utilisant des cordons déjà préparés.
Cordon d’alimentation:
Évitez d’endommager le cordon d’alimentation.
L’APPAREIL
Service:
Consultez un technicien qualifié pour l’entretien de votre appareil.
PAR L’UTILISATEUR.
POUR L’ENTRETIENT.
N’UTILISEZ PAS
si le cordon d’alimentation est endommagé.
safety-4v0.pdf 04/29/03
1
IINNTTRROODDUUCCTTIIOONN
The ES200P powered subwoofer incorporates a 200 watt amplifier. It can be used to
enhance the bottom end (bass) of a full-range speaker system and increase the overall
output of the system. The inputs to the subwoofer can accept a single source either
from a speaker/amplifier output or a line level output from a pre-amp or mixer.
The ES200P also has a built in limiter and thermal protection that make this product
smooth and robust at high power levels. The internal limiter and the internal protection
are factory set to maximize performance.
1 2
1. Power Switch
2. Volume
Set the volume control to a desired level as
music is being played through the unit.
A setting of 0 dB on the SUBWOOFER
LEVEL control is the correct starting point
when setting up a sound system. From
there the sound can be adjusted for best
sound. The 0 dB mark refers to the setting
that will give full power when the line
input is used and the input signal is at a
level of +4 dBV. This also is the setting to
give a sensitivity of 2.83 Vrms (1 watt 8ohms) for 100 dB spl when set for speaker
level input. With a typical full range
companion speaker this will give flat
response. In either line or speaker
operation it will usually be desireable to
set the control at +3 to +6 to give some
bass boost at low power levels. At levels
approaching full power the built-in limiter
will automatically reduce the gain to
prevent over powering the subwoofer.
Operation with settings significantly above
+12 may clip the circuitry in the subwoofer
reducing the dynamics of the music.
Setting the subwoofer gain above +12 is
only appropiate at low operating levels.
3. Input Level Switch
Speaker
Normally, the input to the
subwoofer is from a full-range speaker
cabinet, or amplifier output.
(See figure 2.0)
Line
In this case, the input to the
subwoofer is from a line level source such
as a mixer.
4. Ground Lift
If a hum, or buzz is detected from the
subwoofer, try setting the switch to the
GND LIFT position (OUT position). The
switch should otherwise be left in the
GND (IN position).
5. Input Jacks
The two inputs are balanced 1/4-inch
parallel jacks and can be connected as
shown in figures 2 and 3, on the following
page. Please note that there is no effect
to the performance of the full-range
speaker if it is used to supply a music
signal to the ES200P.
ON
POWER
Yorkville
ES200P
DESIGNED & MANUFACTURED BY YORKVILLE SOUND • TORONTO, CANADA
230V
50Hz
1.1A
CAUTION:
REPLACE WITH
SAME TYPE FUSE AND RATING
ATTENTION:
UTILISER UN FUSIBLE DE
RECHANGE DE MEME TYPE ET CALIBRE
Yorkville
120V
60Hz
2.2A
T 1,25A L
INPUT
GROUND
GROUNDED
UNGROUNDED
INPUT LEVEL
SPEAKER
LINE
INPUT
PARALLEL
THRU
SUBWOOFER
LEVEL
+3
0
-3
-6
POWER
+10
+20
+25
dB
3
4
5
6
Loading...