Yorkville Sound ELITE E160P User Manual
E160P
OWNER'S MANUAL
MANUEL de L'UTILISATEUR
Yorkville
P O W E R E D L O U D S P E A K E R S Y S T E M
Y e
l
l
i
v
k
r
o
Manual-Owners-e160p-1v3.pdf
YS TYPE: ES700P
IMPORTANT SAFETY INSTRUCTIONS
INSTRUCTIONS PERTAINING TO A
RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Read Instructions
The Owner’s Manualshould be read and understood
before operation of your unit. Please, save these instructions for future reference.
Packaging
Keep the box and packaging materials, in case the unit
needs to be returned for service.
Warning
When using electric products, basic precautions should
always be followed, including the following:
Power Sources
Your unit should be connected to a power source only of the voltage
specified in the owners manual or as marked on the unit. This unit has
a polarized plug. Do not use with an extension cord or receptacle
unless the plug can be fully inserted. Precautions should be taken so
that the grounding scheme on the unit is not defeated.
Hazards
Do not place this product on an unstable cart, stand, tripod, bracket or
table. The product may fall, causing serious personal injury and serious
damage to the product. Use only with cart, stand, tripod, bracket, or
table recommended by the manufacturer or sold with the product.
Follow the manufacturer’s instructions when installing the product and
use mounting accessories recommended by the manufacturer.
The apparatus should not be exposed to dripping or splashing water;
no objects filled with liquids should be placed on the apparatus.
Terminals marked with the “lightning bolt” are hazardous live; the
external wiring connected to these terminals require installation by an
instructed person or the use of ready made leads or cords.
No naked flame sources, such as lighted candles, should be
placed on the apparatus.
Power Cord
The AC supply cord should be routed so that it is unlikely that it will be
damaged. If the AC supply cord is damaged DO NOT OPERATE THE UNIT.
Service
The unit should be serviced only by qualified service personnel.
INSTRUCTIONS RELATIVES AU RISQUE
DE FEU, CHOC ÉLECTRIQUE, OU
BLESSURES AUX PERSONNES
AVIS:
AFIN DE REDUIRE LES RISQUE DE CHOC ELECTRIQUE,
N’ENLEVEZ PAS LE COUVERT (OU LE PANNEAU ARRIERE)
NE CONTIENT AUCUNE PIECE
REPARABLE PAR L’UTILISATEUR.
CONSULTEZ UN TECHNICIEN QUALIFIE
POUR L’ENTRETIENT
Veuillez Lire le Manuel
Il contient des informations qui devraient êtres comprises
avant l’opération de votre appareil. Conservez S.V.P. ces
instructions pour consultations ultérieures.
Emballage
Conservez la boite au cas ou l’appareil devait être
retourner pour réparation.
Attention:
Lors de l’utilisation de produits électrique, assurez-vous
d’adhérer à des précautions de bases incluant celle qui
suivent:
Alimentation
L’appareil ne doit être branché qu’à une source d’alimentation
correspondant au voltage spécifié dans le manuel ou tel qu’indiqué sur
l’appareil. Cet appareil est équipé d’une prise d’alimentation polarisée.
Ne pas utiliser cet appareil avec un cordon de raccordement à moins
qu’il soit possible d’insérer complètement les trois lames. Des
précautions doivent êtres prises afin d’eviter que le système de mise à
la terre de l’appareil ne soit désengagé.
Risque
Ne pas placer cet appareil sur un chariot, un support, un trépied ou une
table instables. L’appareil pourrait tomber et blesser quelqu’un ou subir
des dommages importants. Utiliser seulement un chariot, un support,
un trépied ou une table recommandés par le fabricant ou vendus avec
le produit. Suivre les instructions du fabricant pour installer l’appareil et
utiliser les accessoires recommandés par le fabricant.
Il convient de ne pas placer sur l’appareil de sources de flammes
nues, telles que des bougies allumées.
L’appeil ne doit pas être exposé à des égouttements d’eau ou des
éclaboussures et qu’aucun objet rempli de liquide tel que des vases
ne doit être placé sur l’appareil.
Les dispositifs marqués d’une symbole “d’éclair” sont des parties
dangereuses au toucher et que les câblages extérieurs connectés à
ces dispositifs de connection extérieure doivent être effectivés par un
opérateur formé ou en utilisant des cordons déjà préparés.
Cordon d’Alimentation
Évitez d’endommager le cordon d’alimentation. N’UTILISEZ PAS
L’APPAREIL si le cordon d’alimentation est endommagé.
Service
Consultez un technicien qualifié pour l’entretien de votre appareil.
safety-4v2.eps Aug 26/05
élite E160P
Y
e
l
l
i
v
k
r
o
SPEAKER
LINE / MIC
ON
LIFT
MIC
PARALL EL
GR OUN D
IN
OUT
LO UDN ES S
I NP UT L EVE L
E160P
OU TPUT
LEV EL
0
1
2
3
4
5
6
7
8
9
1 0
Introduction
The E160P is a bi-amped powered full-range speaker designed
to meet most any requirement. It projects 200 watts of clear,
full sound. Features of this product include a Mic input, two
parallel 1/4” input jacks, Volume control, loudness switch,
and a speaker/line input select switch. This two way cabinet
is protected against overcurrent and clipping via non-
switchable (built in) limiters, with red LED clip indicators. .
Line Level (balanced) and Speaker Input Jacks
The two 1/4-inch jacks will accept either
Line, Balanced Line or Speaker inputs. In
most cases, the input will be from another
speaker source ,and therefore the Input
Select Switch should be IN.
Mic Input (balanced)
The Balanced Mic input will
accept most microphones.
The Input Select Switch must
be OUT for Line Level Inputs.
When a Mic is being used
in conjunction with another
source (music) through the
1/4” jacks, the output level
from the other source will be
slightly attenuated.
Loundness Switch
The Loudness switch, when
pushed IN, activates a
low-frequency boost when
desired. This feature is
automatically reduced at
high volumes to protect
the speaker.
Ground Lift Switch
If a hum, or buzz is detected
from the speaker, try setting
the switch to the GND LIFT
position (OUT position). The
switch should otherwise be
left in the GND (IN position).
Volume Control
Set the Volume Control to the desired
output level. Start with a high Volume
setting, with you mixer turned down.
Then, further adjust the mixer and E160P’s
Volumes for best results.
Multiple E160Ps
The para elinput jacks allow many
E160P’s to be connected in a string.
There is no practical limit to the number
of powered speakers that can be
connected together.
Power Switch
The unit can be turned on and
off via the power switch that is
indicated by Power ON green
LED at the front of the unit.
Clip Indicator
When the red LED located on
the front of the cabinet is on,
reduce the input signal to the
amp or reduce the volume until
the Clip indicator turns off.
Amplifier
The E160P features two
amplifiers, one for the high
frequency tweeter and one
for the woofer. The E160P is
thermally protected . If the
amplifier’s heatsink is blocked
in any way, the output will
gradually attenuate until it
is thermally acceptable to
the amplifier, otherwise it will
continue to reduce power
and eventually shut down. The
amplifier, once cooled down,
will turn back ON producing
full power. The woofer is
protected against overcurrent and
clipping, should the amp sense that either
condition exists, it will start to reduce the
output momentarily and roll off the lowfrequency response ranging from 80 Hz to
150 Hz . The loudness button is defeated
automatically at high power outputs and
does not need to be touched.
1
Loading...