Yorkville Sound 200KB User Manual
Manual-Owners-200kb-1v3.pdf
IMPORTANT SAFETY INSTRUCTIONS
safety-4v2.eps Aug 26/05
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
INSTRUCTIONS PERTAINING TO A
RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS
Read Instructions
The Owner’s Manualshould be read and understood
before operation of your unit. Please, save these instructions for future reference.
Packaging
Keep the box and packaging materials, in case the unit
needs to be returned for service.
Warning
When using electric products, basic precautions should
always be followed, including the following:
Power Sources
Your unit should be connected to a power source only of the voltage
specified in the owners manual or as marked on the unit. This unit has
a polarized plug. Do not use with an extension cord or receptacle
unless the plug can be fully inserted. Precautions should be taken so
that the grounding scheme on the unit is not defeated.
Hazards
Do not place this product on an unstable cart, stand, tripod, bracket or
table. The product may fall, causing serious personal injury and serious
damage to the product. Use only with cart, stand, tripod, bracket, or
table recommended by the manufacturer or sold with the product.
Follow the manufacturer’s instructions when installing the product and
use mounting accessories recommended by the manufacturer.
The apparatus should not be exposed to dr
ipping or splashing water;
no objects filled with liquids should be placed on the apparatus.
Te
rminals marked with the “lightning bolt” are hazardous live; the
external wiring connected to these terminals require installation by an
instructed person or the use of ready made leads or cords.
No naked flame sources, such as lighted candles, should be
placed on the apparatus
.
Power Cord
The AC supply cord should be routed so that it is unlikely that it will be
damaged. If the AC supply cord is damaged DO NOT OPERATE THE UNIT.
Service
The unit should be serviced only by qualified service personnel.
AVIS:
AFIN DE REDUIRE LES RISQUE DE CHOC ELECTRIQUE,
N’ENLEVEZ PAS LE COUVERT (OU LE P
ANNEAU ARRIERE)
NE CONTIENT AUCUNE PIECE
REPARABLE PAR L’UTILISATEUR.
CONSULTEZ UN TECHNICIEN QUALIFIE
POUR L’ENTRETIENT
INSTRUCTIONS RELATIVES AU RISQUE
DE FEU, CHOC ÉLECTRIQUE, OU
BLESSURES AUX PERSONNES
Veuillez Lire le Manuel
Il contient des informations qui devraient êtres comprises
avant
l’opération de votre appareil. Conservez S.V.P. ces
instructions pour consultations ul
térieures.
Emballage
Conservez la boite au cas ou l’appareil devait être
retourner pour réparation.
Attention:
Lors de l’utilisation de produits électrique, assurez-vous
d’adhérer à des précautions de bases incluant celle qui
suivent:
Alimentation
L’appareil ne doit être branché qu’à une source d’alimentation
correspondant au voltage sp
écifié dans le manuel ou tel qu’indiqué sur
l’appareil. Cet appareil est équipé d’une prise d’alimentation polarisée.
Ne pas utiliser cet appareil avec un cordon de raccordement
à moins
qu’il soit possible d’insérer complètement les trois lames. Des
précautions doivent êtres prises afin d’eviter que le système de mise à
la terre de
l’appareil ne soit désengagé.
Risque
Ne pas placer cet appareil sur un chariot, un support, un trépied ou une
table instables.
L’appareil pourrait tomber et blesser quelqu’un ou subir
des dommages importants. Utiliser seulement un chariot, un support,
un tr
épied ou une table recommandés par le fabricant ou vendus avec
le produit. Suivre les instructions du fabricant pour installer l’appareil et
utiliser les accessoires recommand
és par le fabricant.
Il convient de ne pas placer sur
l’appareil de sources de flammes
nues, telles que des bougies allumées.
L’appeil ne doit pas être exposé à des égouttements d’eau ou des
éclaboussures et qu’aucun objet rempli de liquide tel que des vases
ne doit
être placé sur l’appareil.
Les dispositifs marqu
és d’une symbole “d’éclair” sont des parties
dangereuses au toucher et que les
câblages extérieurs connectés à
ces dispositifs de connection ex
térieure doivent être effectivés par un
opérateur formé ou en utilisant des cordons déjà préparés.
Cordon d’Alimentation
Évitez d’endommager le cordon d’alimentation. N’UTILISEZ PAS
L’APPAREIL si le cordon d’alimentation est endommagé.
Service
Consultez un technicien qualifié pour l’entretien de votre appareil.
DESIGNED & MANUFACTURED BY
YORKVILLE SOUND • Toronto, CANADA
4-OHMS
MINIMUM
EXTENSION
SPEAKER
EFFECTS LOOP
SENDRETURN
LINE OUTPUT
Yorkville
15 15
12 12
9 9
6 6
3 3
LOW
0 10
1 9
2 8
3 7
4 6
5
VOLUME
15 15
12 12
9 9
6 6
3 3
HIGH
0 10
1 9
2 8
3 7
4 6
5
EFX SEND
15 15
12 12
9 9
6 6
3 3
LOW
0 10
1 9
2 8
3 7
4 6
5
VOLUME
0 10
1 9
2 8
3 7
4 6
5
VOLUME
0 10
1 9
2 8
3 7
4 6
5
VOLUME
15 15
12 12
9 9
6 6
3 3
HIGH
0 10
1 9
2 8
3 7
4 6
5
EFX SEND
0 10
1 9
2 8
3 7
4 6
5
EFX SEND
0 10
1 9
2 8
3 7
4 6
5
MIC
LINE
MIC
LINE
LINE
CD / LINE
LINE
KB
PIANO
CONTOUR
OFF
ON
CHAN NEL
1
CHAN NEL
2
CHAN NEL
3
CHAN NEL
4
CLIPCLIPCLIPCLIPCLIP
POWER
PHONES
120VAC
60Hz
2.2A
230V
50Hz
1.1A
FUSE
T 1.25A
CAUTION:
REPLACE WITH
SAME TYPE FUSE AND RATING
ATTENTION:
UTILISER UN FUSIBLE
DE RECHANGE DE MEME
TYPE ET CALIBRE
Introduction
The multi-purpose Yorkville 200KB power combo has been designed to produce the most
performance possible in a compact format. The Yorkville 200KB mixer/amplifier is appropriate for use with just about anything that produces an audio signal. This includes such things as
keyboards, acoustic guitars (with pickups), microphones, or an audio source such as a Compact
Disc or cassette player. No matter what the Yorkville 200KB is used for, we are sure that it will
prove to be versatile and dependable for years to come.
Master Volume
The MASTER volume controls the overall sound output level.
Input Channels
The Yorkville 200KB has four input channels. All input channels can be used simultaneously.
For example, you can use microphones on Channel 1 and Channel 2, a keyboard on Channel 3,
and a CD player on Channel 4. You can balance the volumes of the sources by adjusting each
channel’s volume control.
All phone jack inputs on the Yorkville 200KB can accept both balanced and unbalanced signals. The phone jack inputs are balanced TRS — Tip(+) / Ring(–) / Sleeve(GND). These TRS phone
jacks can also accept regular unbalanced cables. For best results and reduced noise it is advised
that you use balanced (stereo) cables for interconnection wherever possible. Also, all of the
phone jack outputs are electronically processed to minimize the possibility of induced–hum from
equipment interconnections. Clip LEDs in all channels and busses light 3dB before clipping.
• Channel 1/Channel 2 — Although these channels are optimized for microphones, the
phone jack also accept line level inputs (an acoustic guitar with a pickup, electronic
* Do not use both the phone and XLR inputs at the same time as signals will be highly attenuated.
keyboard, Compact Disc player or other audio sources). Adjust the VOLUME controls
for the level of sound desired. As Channel 1 and Channel 2 offers more gain than
Channel 3 and Channel 4, it is advised that the sources with the lowest output levels
be connected to Channel 1 or Channel 2.
• Channel 3 — The phone jack on this channel is optimized for line level signals such as
an electronic keyboard or other similar audio sources. Adjust the VOLUME control for
the level of sound desired.
• Channel 4 — The phone jack on this channel is optimized for line level signals such as
an electronic keyboard. The RCA jacks are optimized for a Compact Disc player, cassette player, or other similar audio sources. Adjust the VOLUME control for the level of
sound desired.
1
Loading...