Yorkville ELITE E10P User Manual
Features:
➲ 350 Watt Powered Speaker
➲ 10-inch Neodymium Woofer / 1-inch Driver
➲ Solid Plywood Cabinet Construction
➲ Internally Biamped
➲ 65 - 20k Frequency Response (Hz +/- 3db)
➲ Metal Handle & Standmount Adaptor
➲ Crossover Frequency 1500 Hz
Overview:
élite E10P
élite L10P
10-inch Powered Speaker
The E10P is an advanced, compact two-way active loudspeaker designed for a wide variety
of pro-audio applications. Innovative processing is built-in to ensure optimum performance
and clarity.
Built for maximum versatility, the E10P input section will easily handle microphone or line level
inputs through the XLR / TRS Combi-jack. Bass and Treble EQ in addition to Level control and
a Mic/Line input gain selector ensure the E10P can handle virtually any audio source. A
Live/Playback EQ preset selector, a 100Hz/50Hz low-frequency Roll-off selector (no crossover
needed for subs), a full-time Limiter with LED indicator, a Clip LED, a Link output ensure the
E10P can adapt easily to any audio application including use as a front-of-house PA
loudspeaker, as a personal wedge monitor or as a single unit micro PA for a paging and
playback system (no additional mixer required).
A lightweight, low-noise 300-Watt Class-D amplifier drives the low frequency 10-inch
woofer while a two-tier 50-W
linear high-frequenc
y response po
att amplifier capable of delivering an exceptionally clear and
wers the 1-inch horn.
An on-board active DSP based
crossover ensures that the woofer and horn operate optimally while protecting the high
quality speaker components.
The E10P features a powerful yet lightweight 10-inch low-frequency driver with a neodymium
magnet, a silky-smooth 1-inch horn and an enclosure built from void-less 25mm multi-ply wood
for lightweight with c
lassic Elite ruggedness.
That durability is engineered into the multi-angle
enclosure pioneered for the Elite line that enables the E10P to operate vertically on a stand or
horizontally as a stage monitor. For added convenience, the E10P easily converts between
120V
AC,
230V
AC or 240V
AC.
E10P Specifications:
Model
SYSTEM TYPE Powered Loudspeaker
ACTIVE OR PASSIVE Active
PROGRAM POWER (WATTS) 350
BIAM PABLE Internally Biamped
FREQUENCY RESPONSE (HZ +/- 3DB) 65 - 20k
CROSSOVER FREQUENCY (HZ) 1500
DRIVER CONFIGURATION 10-inch / 1-inch
HF PROGRAM PO WER (WATTS) 50
HF IM PEDANCE (OHMS) 8
HF DISPERSION (°H X °V) 100 x 25
HF PROTECTION Peak and Average Limiting
LF PRO GRAM POWER(WATTS) 300
LF IMPEDANCE(OHMS) 4
LF PROTE CTION Excursion, RMS
TOTAL POW ER (WATTS) 350
LING S CHEME Convection
O
O
C
ER CAB LE Removable IEC
W
O
P
ER SWITCH Yes
W
O
P
ER CONSUMPTION (TYP/MAX) 120VA / 200VA
W
O
P
UTS 1 Combijack (XLR / 1/4-inch)
P
N
I
PUT IM PEDANCE (BAL/UN BAL) 4k ohms / 2k ohms
N
I
PUT SENSITIVITY (VRMS SINE) Line in 1.4 at center, 0.35 at max
N
I
VEL CONTROLS Gain
E
L
ONTROLS Bass, Treble
Q C
E
MITER Peak and Average limiting on horn and woofer
I
L
D INDICATORS Power, Clip
E
L
RNE RS Metal
O
C
ET Plastic Glides
E
F
YING HARDWARE 5 (2 Top, 2 Bottom, 1 Pullback)
L
F
R HANDLES One Side
A
B
LE MOU NT ADAPTER (1 3/8"-3.5CM) Yes
O
P
NCLOSURE MATERIALS 15mm (5/8-inch) 11-ply Russian Birch
E
ORT(S) Rear
P
RILLE Perforated Metal
G
OVE RING / FINISH Black Ozite (Carpet)
C
PTIONAL COVERING / FIN ISHES Black Ultrathane Paint (E10PB)
O
IME NSIONS (DWH XBACKW, INCHES) 12 x 13 x 18.5 x 5.5
D
IME NSIONS (DWH XBACKW, CM) 30 x 33 x 45 x 14
D
EIGHT (LBS/KG) 34 / 15.5
W
E10P
Specifications subject to change without notice.
y orkville.com
Loading...