Yorkville C12W Parts list
Coliseum
Installation Series
Overview
The new Canadian made Coliseum C12W installation loudspeaker uses a
solid birch plywood cabinet construction, all metal grill and rotatable ABS
80° x 50° horn. Ample integrated flypoints for firm attachment to custom
designed Yorkville flyware ensure cost effective rigging in single cabinet
or arrays.
Additional Omnimount compatible rigging points make the 400 watt
C12W an ideal solution for larger commercial installation or House of
Worship PA applications.
Optional FH2W - C12W / C15W Flying Hardware
The FH2W hardware kit has been specifically designed to expand the
C12W and C15W's already advanced mounting capabilities. A single
FH2W installation kit is the ideal rigging solution for installing either
Yorkville Coliseum Series C12W or C15W speakers in single point hangs
for solo cabinets or two-box arrays.
C12W
The staggered hole pattern in the FH2W allows for a multitude of tilt
angles simply by moving the shackle towards front or the rear of the
bracket. If further down-tilt is required, simply attach an eyebolt in the
pullback position of the cabinet in addition to the hang point. When
using C12W or C15W cabinets in two cabinet arrays, the FH2W splays the
loudspeakers at the ideal angles to minimize interference and lobing.
Features
• 400 Watts / 8 ohms
• 12-inch Woofer / 1-inch Horn Driver
x 50° Rotatable Horn
°
• 80
• Nine Integrated 1/4-20 flypoints
• Optional Versatile FH2W Flying Hardware Available
• Also Compatible with 60.0WA Omnimount Bracket
• Solid Birch Cabinet Construction
• Extensive Internal Metal Bracing for
• All Metal Grille
• Speakon™ & Terminal Strip Input
Added Security and Long
erm Reliability
T
yorkville.com
Coliseum
Installation Series
Specifications
System Type Two Way
Active or Passive Passive
Program Power (Watts) 400
Biampable No
Nominal Impedance (Ohms) 8
Sensitivity (dB @1Watt/1m) 98
Max SPL (dB) 124
Frequency Response (Hz +/- 3dB) 55 - 20k
Crossover Frequency (Hz) 1100
Driver Configuration 12 inch / 1 inch
HF Driver(s) 1 inch Mylar
HF Horn Rotatable ABS Waveguide
HF Dispersion (°H x °V) 80 x 50 Rotatable
HF Protection CTL
Inputs - Speakon 4-pin 2
Inputs - Screw Terminal 1 Pair
Flying Hardware 1/4 inch
Optional Flying Hardware FH2W Flyware bracket is available
Enclosure Materials
Grille Perforated Metal
Covering / Finish Two Part White Epoxy
Other Details Has rear-mount rigging points for
Dimensions (DWH xbackW, inches) 14.3 x 16.2 x 24.1 x 11.1
Dimensions (DWH xbackW, cm) 36.3 x 41.1 x 61.2 x 28.2
eight (lbs/kg)
W
15mm (5/8inch) 11-ply Russian birch
Omnimount 60.0WA Brack
54 / 24.6
C12W
et
Specifications subject to change without notice
yorkville.com
Loading...