IMPORTANT SAFETY INSTRUCTIONS
INSTRUCTIONS PERTAINING TO A RISK
OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Read Instructions:
The
Owner’s Manual
before operation of your unit. Please, save these
instructions for future reference.
Packaging:
Keep the box and packaging materials, in case the unit
needs to be returned for service.
Warning:
When using electric products, basic precautions should
always be followed, including the following:
Power Sources:
Your unit should be connected to a power source only of the
voltage specified in the owners manual or as marked on the unit.
This unit has a polarized plug. Do not use with an extension cord or
receptacle unless the plug can be fully inserted. Precautions should
be taken so that the grounding scheme on the unit is not defeated.
Hazards:
Do not place this product on an unstable cart, stand, tripod, bracket or
table. The product may fall, causing serious personal injury and serious
damage to the product. Use only with cart, stand, tripod, bracket, or table
recommended by the manufacturer or sold with the product. Follow the
manufacturer’s instructions when installing the product and use mounting
accessories recommended by the manufacturer.
The apparatus should not be exposed to dripping or splashing
water; no objects filled with liquids should be placed on the
apparatus.
Terminals marked with the “lightning bolt” are hazardous live;
the external wiring connected to these terminals require installation
by an instructed person or the use of ready made leads or cords.
No naked flame sources, such as lighted candles, should be
placed on the apparatus.
Power Cord:
The AC supply cord should be routed so that it is unlikely that it will
be damaged. If the AC supply cord is damaged
OPERATE THE UNIT
Service:
The unit should be serviced only by qualified service personnel.
should be read and understood
DO NOT
.
INSTRUCTIONS RELATIVES AU RISQUE
DE FEU, CHOC ÉLECTRIQUE, OU
BLESSURES AUX PERSONNES.
AVIS:
AFIN DE REDUIRE LES RISQUE DE CHOC ELECTRIQUE,
N’ENLEVEZ PAS LE COUVERT (OU LE PANNEAU
ARRIERE). NE CONTIENT AUCUNE PIECE REPARABLE
CONSULTEZ UN TECHNICIEN QUALIFIE
Veuillez lire le manuel:
Il contient des informations qui devraient êtres comprises avant
l’opération de votre appareil. Conservez S.V.P. ces instructions
pour consultations ultérieures
Emballage:
Conservez la boite au cas ou l’appareil devait être
retourner pour réparation.
Attention:
Lors de l’utilisation de produits électrique,
assurez-vous d’adhérer à des précautions de bases
incluant celle qui suivent:
Alimentation:
L’appareil ne doit être branché qu’à une source d’alimentation
correspondant au voltage spécifié dans le manuel ou tel qu’indiqué
sur l’appareil. Cet appareil est équipé d’une prise d’alimentation
polarisée. Ne pas utiliser cet appareil avec un cordon de
raccordement à moins qu’il soit possible d’insérer complètement les
trois lames. Des précautions doivent êtres prises afin d’eviter que le
système de mise à la terre de l’appareil ne soit désengagé.
Risque:
Ne pas placer cet appareil sur un chariot, un support, un trépied ou une
table instables. L’appareil pourrait tomber et blesser quelqu’un ou subir des
dommages importants. Utiliser seulement un chariot, un support, un trépied
ou une table recommandés par le fabricant ou vendus avec le produit.
Suivre les instructions du fabricant pour installer l’appareil et utiliser les
accessoires recommandés par le fabricant.
Il convient de ne pas placer sur l’appareil de sources de flammes
nues, telles que des bougies allumées.
L’appeil ne doit pas être exposé à des égouttements d’eau ou des
éclaboussures et qu’aucun objet rempli de liquide tel que des vases
ne doit être placé sur l’appareil.
Les dispositifs marqués d’une symbole “d’éclair” sont des parties
dangereuses au toucher et que les câblages extérieurs connectés à
ces dispositifs de connection extérieure doivent être effectivés par un
opérateur formé ou en utilisant des cordons déjà préparés.
Cordon d’alimentation:
Évitez d’endommager le cordon d’alimentation.
L’APPAREIL
Service:
Consultez un technicien qualifié pour l’entretien de votre appareil.
PAR L’UTILISATEUR.
POUR L’ENTRETIENT.
N’UTILISEZ PAS
si le cordon d’alimentation est endommagé.
safety-4v0.pdf 04/29/03
AP6040 Parts List 5/18/00
16 PIN SOCKET W311 6 T WINSLOW
10 0 U 63V 20%CAP BLK 10X13MM EL
CUSTOM .5 LED SPACER BLACK
33 0 U 25V 20%CAP BLK 10X13MM EL
1/ 4W 3 K3 5%MINI T&R RES
RED 3MM LED 1V9 20MA .4SPCER T&R
47 0 U 25V 20%CAP BLK 10X15MM EL
68 0 0 U 63V 20%CAP BLK 25X50MM ELS
GRN 3MM LED 1V9 20MA .4SPCER T&R
82 0 0 U 50V 20%CAP RADIAL ELECT BULK
1/ 4W 4 K7 5%MINI T&R RES
GRN 3MM LED 1V9 5MA FROSTED
_1 0 K AUD 1 6 MM DETENT P22
1/ 4W 4 K9 9 1%MINI MF T&R RES
BRIDGE 35 A 4 00V WIRE LEAD GI3504
BAV21 200 V 0A2 5 DIODE T&R
25 .0 AMP CIRCUIT BREAKER
1N4148 75V 0A4 5 DIODE T&R
__ _ 4 UH COIL 14AWG ZOBEL HORIZONTAL
1N4004 400V 1 A0 DIODE T&R
RING TERMINAL 1 8 AWG WIRE & #8 SCREW
MR854 4 00V 3A0 DIODE FASREC
STAR RING TERMINAL 18 AWG #10 SCREW
1/ 4W 8 K2 5%MINI T&R RES
1N5225B 3V0 0W5 ZENER 5% T&R
25 0 MALE PCB TAB BULK CARTRIGE
1/ 4W 9 K7 60 0.1% * * * T&R RES
1N750ARL 4V7 0W5 ZENER 5% T&R
RED ON LEFT DUAL BINDING POST TPP5
1N753ARL 6V2 0W5 ZENER 5% T&R
RED ON RIGHT DUAL BINDING POST TPP5
1/ 4W 10K0 1%MINI MF T&R RES
1N5240BRL 10 V0 0W5 ZENER 5% T&R
1N5244B 14V0 0W5 ZENER 5% T&R
SPKON 4C PCB MT HORZ GRY #4
1N4745A 16V0 1 W0 ZENER 5% T&R
XLR FEML PCB MT HORZ THIN SNAP-IN
1N5246B 16V0 0W5 ZENER 5% T&R
FAN 92MM X 92MM 60CFM 24VDC
1N5248B 18V0 0W5 ZENER 5% T&R
AAVID 5972-B H/ S W/ TAB B.O.
1N5250B 20V0 0W5 ZENER 5% T&R
B52200F006 COMP WASH #4 SMALL
1N5251BRL 22 V0 0W5 ZENER 5% T&R
6-32 X 3/ 8 STEEL PEM STUD
1/ 4W 20K0 1%MINI MF T&R RES
1N5256B 30V0 0W5 ZENER 5% T&R
CLEAR PVC TUBING .500" DIA. 105'C
1N5257B 33V0 0W5 ZENER 5% T&R
BC550C TO92 NPN TRAN T&R TB
5/ 8" BUMPER BUTTON BLACK
BC560C TO92 PNP TRAN T&R TB
NYLON SECUR-A-TACH MINI PLASTIC TIE
MPSA06 TO92 NPN TRAN T&R TA
2N5551 TO92 NPN TRAN T&R TA
SQUARE BUMPER BUTTON BLACK
2N5401 TO92 PNP TRAN T&R TA
30 AMP 125V TWISTLOC PLUG
MPSA13 TO92 NPN DARL T&R TA
STRAIN RELEIF 0.8 INCH W/ DOME NUT •
MPSA63 TO92 PNP DARL T&R TA
2.0W 150K 5%10MM BODY T&R RES
MJF66 6 8 T221D PNP TRAN DARL TJ
MJF63 8 8 T221D NPN TRAN DARL TJ
1/ 4W 22 0 K 5%MINI T&R RES
1/ 4W 47 0 K 5%MINI T&R RES
TO-247 THERMO CONDUCTIVE PAD
MTP10N15 L TO220 NCH MFET TN
TO3 PREGREASED MICA 56-03-2AP
MTP23P06 TO220 PCH MFET TN
TO-220 THERMO PAD SMALL HOLE
1/ 4W 8 M2 5 %MINI T&R RES
TO220 THERMO PAD LARGE HOLE 56359B
MJL1302A TO3P PNP TRAN TK
12 CIR WAFER W/ LCK VT 0.1"
13 " 8C-26AWG RIB 1 W/ LCK HDR 098
MJL3281A TO3P NPN TRAN TK
23 " 9C-24AWG RIBBON HITMP 0.1 "
15 " 12 C-26AWG RIB 1 W/ LCK HDR 098
MC33 0 78P IC DUAL OP AMP
22 AWG SOLID SC WIR T&R JMP
28 " 12 C-26AWG RIB 1 W/ LCK HDR 098
24 AWG SOLID SC WIR RAD JMP
12 " 16 C-28AWG DIP HDR CABLE .05"
LM13600N IC XCONDUCTANCE AMP
RELAY 2C 01AMP DC24 ???MA PC-S
1.0W 0R47 5%FLAME PROOF T&R RES
RELAY 1A 30AMP DC24 036MA PC-C
MAC224-4 TO220 40A TRIAC 200V
HEATSINK(TAPTREE) AP4020 LGTH 11'6"
MCR10 0 -6 TO92 SCR 600V 0.8A
1/ 4W 1 R 5%FLAME PROOF T&R RES
BLACK 'U' EXTRUSION DIE # 9 4 3
1.0W 1R 5%FLAME PROOF T&R RES
.025" FISHPAPER ( FLAT 48" SHEETS )
AS35 FN-TO92 TEMPERATURE SENSOR
#4 X 1/ 4 PAN PH TYPE A ZINC
5R0 20% NTC THERMISTOR-SURGTR
#4 X 3/ 8 FLAT QUAD TYPE A JS500 BLK
_1 0 P 500 V 5%CAP T&R RAD CER.2" NPO
4-40 X 3/ 8 PAN PH MS JS500
10 0 P 100 V 1 0 %CAP T&R BEAD NPO
1/ 8W 10R0 2%FLAME PROOF T&R RES
4-40 X 1/ 2 PAN PH MS JS500
22 0 P 100 V 2%CAP T&R RAD CER.2" NPO
1/ 4W 10R 2%FLAME PROOF T&R RES
4-40 X 5/ 8 PAN PH MS JS500
22 0 P 100 V 1 0 %CAP T&R BEAD NPO
#6 X 1/ 4 PAN PH TYPE B JS500
47 0 P 100 V 5%CAP T&R RAD CER.2" NPO
1/ 8W 22R1 1%FLAME PROOF T&R RES
6-32 X 3/ 8 PAN PH TAPTITE JS500
__ 1 N 400V 5 %CAP T&R RAD .2"FLM
1/ 8W 39R 2%FLAME PROOF T&R RES
6-32 X 3/ 8 FLAT PH TAPTITE BO#4 HEA
__ 1 N5 200V 5%CAP T&R RAD CER.2"NPO
6-32 X 1/ 2 PAN PHIL MS ZINC CLEAR
__ 2 N2 400V 5%CAP T&R RAD .2 " FLM
1/ 8W 75R 2%FLAME PROOF T&R RES
8-32 X 5/ 8 PAN PH TAPTITE JS500
__ 4 N7 250V 20%CAP BLK 'Y' 10MM AC
1/ 8W 10 0 R0 1%FLAME PROOF T&R RES
10 -32 X 1/ 4 PAN PH TAPTITE JS500
__ 6 N8 100V 5%CAP T&R RAD .2 " FLM
1/ 4W 12 0 R 5%MINI T&R RES
#1 0 X 1/ 2 PAN PH TYPE A JS500 BLACK
_1 0 N 250V 20%CAP BLK RAD POLY FLM
1/ 4W 15 0 R 5%MINI T&R RES
10 -32 X 1 1/ 4 PAN QD MS JS500 BLACK
_2 2 N 100V 10%CAP T&R RAD .2 " FLM
1/ 4W 20 0 R 1%FLAME PROOF T&R RES
1/ 4-2 0 X 1 TRUSS PH MS JS500 BLACK
_2 2 N 275V 20%CAP BLK 'X2' 15MM AC
1/ 4W 22 0 R 5%MINI T&R RES
11 / 64 NYLON SPACER (MICRO PLASTIC)
_6 8 N 100V 5 %CAP T&R RAD .2"FLM
1/ 8W 24 9 R 2%FLAME PROOF T&R RES
.250 SPACER ID.19 0 OD.31 ALUMINUM
10 0 N 100V 5 %CAP T&R RAD .2"FLM
SNAP IN .375 SPACER RICHCO
10 0 N 50V 10%CAP T&R BEAD X7R
1/ 4W 27 0 R 5% .2"U T&R RES
SNAP ON 0.5" SPACER RICHCO
15 0 N 63V 10 %CAP T&R RAD .2"FLM
22 0 N 63V 10 %CAP T&R RAD .2"FLM
SHOULDER WASHER SWS-229 LENGTH 1/ 8
22 0 N 250V 10%CAP BLK RAD POLY FLM
1/ 4W 47 0 R 5%MINI T&R RES
47 0 N 63V 10 %CAP T&R RAD .2"FLM
1/ 8W 68 1 R 1%FLAME PROOF T&R RES
3/ 4 OD X 5/ 16 ID X .08 THICK WASHER
47 0 N 50V 10%CAP T&R BEAD Z5U
1/ 8W 1 K 2%FLAME PROOF T&R RES
__ 1 U 63V 20%CAP T&R RAD .2"EL
DPDT PUSH SW PCMT H BREAK B4 MAKE
__ 4 U7 63V 20%CAP T&R RAD .2"EL
DPDT ROKR SW QUIK 250" AC/PWR ON-OFF
_1 0 U 16V 20%CAP T&R RAD .2"NP
PC SCREW TERMINAL PC MOUNT
_1 0 U 160V 20%CAP BLK 10X13MM EL
1/ 4W 1 K5 5%MINI T&R RES
6-32 X 1/ 4" INSERT CFS0632-8
_1 0 U 63V 20%CAP T&R RAD .2"EL
_2 2 U 50V 20%CAP T&R RAD .2"EL
100M1151 POWER SUPPLY AP6040 1PER 2OZ
_3 3 U 16V 20%CAP T&R RAD .2"NP
1/ 4W 2 K2 5%MINI T&R RES
M1150 POWER AMP AP604 0 1PER 2OZ
10 0 U 25V 20%CAP T&R RAD .2"EL
IMPORTANT SAFETY INSTRUCTIONS
16 PIN SOCKET W3116T WINSLOW
100U 63V 20%CAP BLK 10X13MM EL
CUSTOM .5 LED SPACER BLACK
330U 25V 20%CAP BLK 10X13MM EL
RED 3MM LED 1V9 20MA .4SPCER T&R
470U 25V 20%CAP BLK 10X15MM EL
6800U 63V 20%CAP BLK 25X50MM ELS
GRN 3MM LED 1V9 20MA .4SPCER T&R
8200U 50V 20%CAP RADIAL ELECT BULK
GRN 3MM LED 1V9 5MA FROSTED
1/4W 4K99 1%MINI MF T&R RES
BRIDGE 35A 400V WIRE LEAD GI3504
BAV21 200V 0A25 DIODE T&R
1N4148 75V 0A45 DIODE T&R
___4UH COIL 14AWG ZOBEL HORIZONTAL
1N4004 400V 1A0 DIODE T&R
RING TERMINAL 18AWG WIRE & #8 SCREW
MR854 400V 3A0 DIODE FASREC
STAR RING TERMINAL 18 AWG #10 SCREW
1N5225B 3V0 0W5 ZENER 5% T&R
250 MALE PCB TAB BULK CARTRIGE
1/4W 9K760 0.1% *** T&R RES
1N750ARL 4V7 0W5 ZENER 5% T&R
RED ON LEFT DUAL BINDING POST TPP5
1N753ARL 6V2 0W5 ZENER 5% T&R
RED ON RIGHT DUAL BINDING POST TPP5
1/4W 10K0 1%MINI MF T&R RES
1N5240BRL 10V0 0W5 ZENER 5% T&R
1N5244B 14V0 0W5 ZENER 5% T&R
SPKON 4C PCB MT HORZ GRY #4
1N4745A 16V0 1W0 ZENER 5% T&R
XLR FEML PCB MT HORZ THIN SNAP-IN
1N5246B 16V0 0W5 ZENER 5% T&R
FAN 92MM X 92MM 60CFM 24VDC
1N5248B 18V0 0W5 ZENER 5% T&R
AAVID 5972-B H/S W/TAB B.O.
1N5250B 20V0 0W5 ZENER 5% T&R
B52200F006 COMP WASH #4 SMALL
1N5251BRL 22V0 0W5 ZENER 5% T&R
6-32 X 3/8 STEEL PEM STUD
1/4W 20K0 1%MINI MF T&R RES
1N5256B 30V0 0W5 ZENER 5% T&R
CLEAR PVC TUBING .500" DIA. 105'C
1N5257B 33V0 0W5 ZENER 5% T&R
BC550C TO92 NPN TRAN T&R TB
BC560C TO92 PNP TRAN T&R TB
NYLON SECUR-A-TACH MINI PLASTIC TIE
MPSA06 TO92 NPN TRAN T&R TA
2N5551 TO92 NPN TRAN T&R TA
SQUARE BUMPER BUTTON BLACK
2N5401 TO92 PNP TRAN T&R TA
30 AMP 125V TWISTLOC PLUG
MPSA13 TO92 NPN DARL T&R TA
STRAIN RELEIF 0.8 INCH W/DOME NUT •
MPSA63 TO92 PNP DARL T&R TA
2.0W 150K 5%10MM BODY T&R RES
MJF6668 T221D PNP TRAN DARL TJ
MJF6388 T221D NPN TRAN DARL TJ
TO-247 THERMO CONDUCTIVE PAD
MTP10N15L TO220 NCH MFET TN
TO3 PREGREASED MICA 56-03-2AP
MTP23P06 TO220 PCH MFET TN
TO-220 THERMO PAD SMALL HOLE
TO220 THERMO PAD LARGE HOLE 56359B
MJL1302A TO3P PNP TRAN TK
12 CIR WAFER W/LCK VT 0.1"
13" 8C-26AWG RIB 1 W/LCK HDR 098
MJL3281A TO3P NPN TRAN TK
23" 9C-24AWG RIBBON HITMP 0.1"
15" 12C-26AWG RIB 1 W/LCK HDR 098
22AWG SOLID SC WIR T&R JMP
28" 12C-26AWG RIB 1 W/LCK HDR 098
24AWG SOLID SC WIR RAD JMP
12" 16C-28AWG DIP HDR CABLE .05"
LM13600N IC XCONDUCTANCE AMP
RELAY 2C 01AMP DC24 ???MA PC-S
1.0W 0R47 5%FLAME PROOF T&R RES
RELAY 1A 30AMP DC24 036MA PC-C
MAC224-4 TO220 40A TRIAC 200V
HEATSINK(TAPTREE) AP4020 LGTH 11'6"
MCR100-6 TO92 SCR 600V 0.8A
1/4W 1R 5%FLAME PROOF T&R RES
BLACK 'U' EXTRUSION DIE #943
1.0W 1R 5%FLAME PROOF T&R RES
.025" FISHPAPER ( FLAT 48" SHEETS )
AS35FN-TO92 TEMPERATURE SENSOR
#4 X 1/4 PAN PH TYPE A ZINC
5R0 20% NTC THERMISTOR-SURGTR
#4 X 3/8 FLAT QUAD TYPE A JS500 BLK
_10P 500V 5%CAP T&R RAD CER.2"NPO
4-40 X 3/8 PAN PH MS JS500
100P 100V 10%CAP T&R BEAD NPO
1/8W 10R0 2%FLAME PROOF T&R RES
4-40 X 1/2 PAN PH MS JS500
220P 100V 2%CAP T&R RAD CER.2"NPO
1/4W 10R 2%FLAME PROOF T&R RES
4-40 X 5/8 PAN PH MS JS500
220P 100V 10%CAP T&R BEAD NPO
#6 X 1/4 PAN PH TYPE B JS500
470P 100V 5%CAP T&R RAD CER.2"NPO
1/8W 22R1 1%FLAME PROOF T&R RES
6-32 X 3/8 PAN PH TAPTITE JS500
__1N 400V 5%CAP T&R RAD .2"FLM
1/8W 39R 2%FLAME PROOF T&R RES
6-32 X 3/8 FLAT PH TAPTITE BO#4 HEA
__1N5 200V 5%CAP T&R RAD CER.2"NPO
6-32 X 1/2 PAN PHIL MS ZINC CLEAR
__2N2 400V 5%CAP T&R RAD .2"FLM
1/8W 75R 2%FLAME PROOF T&R RES
8-32 X 5/8 PAN PH TAPTITE JS500
__4N7 250V 20%CAP BLK 'Y' 10MM AC
1/8W 100R0 1%FLAME PROOF T&R RES
10-32 X 1/4 PAN PH TAPTITE JS500
__6N8 100V 5%CAP T&R RAD .2"FLM
#10 X 1/2 PAN PH TYPE A JS500 BLACK
_10N 250V 20%CAP BLK RAD POLY FLM
10-32 X 1 1/4 PAN QD MS JS500 BLACK
_22N 100V 10%CAP T&R RAD .2"FLM
1/4W 200R 1%FLAME PROOF T&R RES
1/4-20 X 1 TRUSS PH MS JS500 BLACK
_22N 275V 20%CAP BLK 'X2' 15MM AC
11/64 NYLON SPACER (MICRO PLASTIC)
_68N 100V 5%CAP T&R RAD .2"FLM
1/8W 249R 2%FLAME PROOF T&R RES
.250 SPACER ID.190 OD.31 ALUMINUM
100N 100V 5%CAP T&R RAD .2"FLM
SNAP IN .375 SPACER RICHCO
100N 50V 10%CAP T&R BEAD X7R
1/4W 270R 5% .2"U T&R RES
SNAP ON 0.5" SPACER RICHCO
150N 63V 10%CAP T&R RAD .2"FLM
220N 63V 10%CAP T&R RAD .2"FLM
SHOULDER WASHER SWS-229 LENGTH 1/8
220N 250V 10%CAP BLK RAD POLY FLM
470N 63V 10%CAP T&R RAD .2"FLM
1/8W 681R 1%FLAME PROOF T&R RES
3/4 OD X 5/16 ID X .08 THICK WASHER
470N 50V 10%CAP T&R BEAD Z5U
1/8W 1K 2%FLAME PROOF T&R RES
__1U 63V 20%CAP T&R RAD .2"EL
DPDT PUSH SW PCMT H BREAK B4 MAKE
__4U7 63V 20%CAP T&R RAD .2"EL
DPDT ROKR SW QUIK 250"AC/PWR ON-OFF
_10U 16V 20%CAP T&R RAD .2"NP
PC SCREW TERMINAL PC MOUNT
_10U 160V 20%CAP BLK 10X13MM EL
6-32 X 1/4" INSERT CFS0632-8
_10U 63V 20%CAP T&R RAD .2"EL
_22U 50V 20%CAP T&R RAD .2"EL
100M1151 POWER SUPPLY AP6040 1PER 2OZ
_33U 16V 20%CAP T&R RAD .2"NP
M1150 POWER AMP AP6040 1PER 2OZ
100U 25V 20%CAP T&R RAD .2"EL
AP6040 Parts List 5/18/00
INSTRUCTIONS PERTAINING TO A RISK
OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Read Instructions:
The
Owner's Manual
before operation of your unit. Please, save these
instructions for future reference.
Packaging:
Keep the box and packaging materials, in case the unit
needs to be returned for service.
Warning:
When using electric products, basic precautions should
always be followed, including the following:
Power Sources:
Your unit should be connected to a power source only of the
voltage specified in the owners manual or as marked on the unit.
This unit has a polarized plug. Do not use with an extension cord or
receptacle unless the plug can be fully inserted. Precautions should
be taken so that the grounding scheme on the unit is not defeated.
Hazards:
Do not place this product on an unstable cart, stand, tripod, bracket or
table. The product may fall, causing serious personal injury and serious
damage to the product. Use only with cart, stand, tripod, bracket, or table
recommended by the manufacturer or sold with the product. Follow the
manufacturer's instructions when installing the product and use mounting
accessories recommended by the manufacturer.
The apparatus should not be exposed to dripping or splashing
water; no objects filled with liquids should be placed on the
apparatus.
Terminals marked with the “lightning bolt” are hazardous live;
the external wiring connected to these terminals require installation
by an instructed person or the use of ready made leads or cords.
No naked flame sources, such as lighted candles, should be
placed on the apparatus.
Power Cord:
The AC supply cord should be routed so that it is unlikely that it will
be damaged. If the AC supply cord is damaged
OPERATE THE UNIT
Service:
The unit should be serviced only by qualified service personnel.
should be read and understood
DO NOT
.
INSTRUCTIONS RELATIVES AU RISQUE
DE FEU, CHOC ÉLECTRIQUE, OU
BLESSURES AUX PERSONNES.
AVIS:
AFIN DE REDUIRE LES RISQUE DE CHOC ELECTRIQUE,
N'ENLEVEZ PAS LE COUVERT (OU LE PANNEAU
ARRIERE). NE CONTIENT AUCUNE PIECE REPARABLE
CONSULTEZ UN TECHNICIEN QUALIFIE
Veuillez lire le manuel:
Il contient des informations qui devraient êtres comprises avant
l'opération de votre appareil. Conservez S.V.P. ces instructions
pour consultations ultérieures
Emballage:
Conservez la boite au cas ou l'appareil devait être
retourner pour réparation.
Warning:
Attention: Lors de l'utilisation de produits électrique,
assurez-vous d'adhérer à des précautions de bases
incluant celle qui suivent:
Alimentation:
L'appareil ne doit être branché qu'à une source d'alimentation
correspondant au voltage spécifié dans le manuel ou tel qu'indiqué
sur l'appareil. Cet appareil est équipé d'une prise d'alimentation
polarisée. Ne pas utiliser cet appareil avec un cordon de
raccordement à moins qu'il soit possible d'insérer complètement les
trois lames. Des précautions doivent êtres prises afin d'eviter que le
système de mise à la terre de l'appareil ne soit désengagé.
Hazard:
Ne pas placer cet appareil sur un chariot, un support, un trépied ou une
table instables. L'appareil pourrait tomber et blesser quelqu'un ou subir des
dommages importants. Utiliser seulement un chariot, un support, un trépied
ou une table recommandés par le fabricant ou vendus avec le produit.
Suivre les instructions du fabricant pour installer l'appareil et utiliser les
accessoires recommandés par le fabricant.
Il convient de ne pas placer sur l'appareil de sources de flammes
nues, telles que des bougies allumées.
L'appeil ne doit pas être exposé à des égouttements d'eau ou des
éclaboussures et qu'aucun objet rempli de liquide tel que des vases
ne doit être placé sur l'appareil.
Les dispositifs marqués d'une symbole “d'éclair” sont des parties
dangereuses au toucher et que les câblages extérieurs connectés à
ces dispositifs de connection extérieure doivent être effectivés par un
opérateur formé ou en utilisant des cordons déjà préparés.
Cordon d'alimentation:
Évitez d'endommager le cordon d'alimentation.
L'APPAREIL
Service:
Consultez un technicien qualifié pour l'entretien de votre appareil.
PAR L'UTILISATEUR.
POUR L'ENTRETIENT.
N'UTILISEZ PAS
si le cordon d'alimentation est endommagé.
SAFE_V4.doc Version 4.0 02/11/99 11:54 AM