How it Works
York
Loading...
YZF
Brochure
4 pgs3.88 Mb1
Brochure
4 pgs854.88 Kb1
Installation Manual
3 pgs691.76 Kb0
Technical Guide
88 pgs822.16 Kb1
Technical Guide
52 pgs1.11 Mb1
User Manual
6 pgs111.43 Kb1
User's Information Manual
6 pgs125.31 Kb0

York YZF Technical Guide

Download
Page 1
TECHNICAL GUIDE
AFFINITY
TM
SERIES
SPLIT -SYSTEM HEAT PUMPS 18 SEER – R-410A – 1 PHASE 2 THRU 5 NOMINAL TONS MODELS: YZH024 THRU 060
Due to continuous product improvement, specific a t io ns are subject to change without notice.
Visit us on the web at
www.upgnet.com and www.york.com
Additional rating information can be found at
www.ahridirectory.org
WARRANTY SUMMARY*
Extended 10-Years limited parts warranty. Extended Lifetime limited compressor warranty.
Extended parts and compressor warra nties require online reg­istration within 90 days of purchase for replacement or closi ng for new home construction.
*Does not apply to R-22 models, 3-Phase models, or internet sales.
See Limited Warranty certificate in User's Information Manual for details.
®®
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
1109431-YTG-A-0714
DESCRIPTION
The 18 SEER Series unit is the outdoor part of a versatile climate system. It is designed with a matching indoor coil component from Johnson Controls Unitary Products. Available for typical applications, this climate system is supported with accessories and documents to serve specific functions.
FEATURES
Superior Coil Protection - A stamped, decorative metal coil
guard protects the tube-in-fin coil from debris and other damaging material.
Protected Compressor - The compressor is safeguarded against abnormal pressures and temperatures by an internal pressure relief valve, an internal temperature sensor, and factory high and low pressure system controls. A factory installed liquid line filter-drier further protects the compressor against moisture and debris.
Environmentally Friendly Refrigerant - The next generation refrigerant R-410A delivers environmentally friendly performance with zero ozone depletion.
Durable Finish - An automotive quality finish provides the ulti­mate protection from harmful UV rays and rust creep, ensuring a long-lasting, high quality appearance. A powder-paint topcoat is applied over a baked-on primer using a galvanized, zinc coated steel base material. The result is a finish that has been proven in testing to provide 33% greater durability than conventional pow­der-coat finishes.
Hot Heat Pump - An optional mode that slows the indoor fan for higher register air temperatures and premium comfort.
QuietDrive
composite base pan, isolated compressor compartment, and two­stage compressor to reduce overall sound to a mere whisper.
Low RPM ECM Fan Motor - Helps to reduce airflow noise. Swept Wing Fan - A fan design boasting technology adapted
from aeronautic and defense engineering provides for whisper­quiet operation by allowing air to flow smoothly and efficiently across the fan tips.
Composite Base Pan - The strong and durable composite base pan provides added strength while resisting rust and corrosion, as well as reducing sound and vibration.
Isolated Compressor Compartment - A molded composite bulkhead isolates the refrigeration components and the compres­sor from the rest of the unit, reducing sound and vibration.
Lower Installed Cost - Designed to provide enhanced installabil­ity by featuring a slide-down control compartment that allows easy access to control components, along with angled service valves to reduce overall installation time and cost. Factory charged for a 15 foot lineset.
Factory Installed Filter-Drier - A factory installed, solid core liq­uid line filter-drier removes harmful debris and moisture from the system.
Easy Service Access - A full end, full service access panel with handle makes for easy entry to internal components.
Communications Capable - Requiring only a simple 4-wire installation, the communicating capability enables the use of the Touch Screen Communicating Control, allowing real time visibility of system operation and the use of diagnostic features, while still maintaining the ability to function with a traditional thermostat.
Complete System Control - These heat pumps utilize the unique York Guard VI microprocessor defrost control system to provide optimal comfort as well as monitor the overall system for reliable operation. In the event improper operating conditions occur (high temperature and/or high pressure), the system will automatically shut the system down to extend the life of the heat pump. The defrost control features an internal memory to aid the technician in troubleshooting, reducing service time and cost.
Premium System Warranty - Limited lifetime compressor war­ranty when registered online within 90 days of installation.
Agency Listed - Safety certified by CSA to UL 1995 / CSA 22.2. Performance certified to ANSI/AHRI Standard 210/240 in accor­dance with the Unitary Small Equipment certification program.
TM
System - Features combination of swept-wing fan,
Page 2
1109431-YTG-A-0714
VAPOR
LIQUID
2-3/8
3-1/8
6-1/2
C
A
B
Physical and Electrical Data
MODEL
Unit Supply Voltage 208-230V, 1 60Hz Normal Voltage Range
Minimum Circuit Ampacity 17.5 21.8 29.2 36.9 Max. Overcurrent Device Amps Min. Overcurrent Device Amps
Compressor Amps
Crankcase Heater No No No No Factory External Discharge Muffler Yes Yes Yes Yes Factory External Check Valve No No No No
HS Kit Required with TXV Fan Diameter Inches 24 24 24 24
Fan Motor
Coil
Liquid Line OD (in) (Field Installed) 3/8 3/8 3/8 3/8 Vapor Line OD (in) (Field Installed) 3/4 3/4 7/8 7/8
Unit Charge (Lbs. - Oz.) Charge Per Foot, Oz. 0.62 0.62 0.67 0.67 Operating Weight Lbs. 295 295 320 325
1. Rated in accordance with AHRI Standa rd 110-2012, utilization range “A”.
2. Dual element fuses or HACR circuit breaker. Maximum allowable overcurrent protection.
3. Dual element fuses or HACR circuit breaker. Minimum recommended overcurrent protection.
4. See Hard Start Kit Accessory Installation Manual for Hard Start Kit p art number for each model.
5. The Unit Charge is correct for the outdoor unit, smallest matched indoor unit, and 15 feet of refrigerant tubing. For tubing lengths ot her th an 15 fe et, add or subtract the amount of refrigerant, using the differe nce in actual lineset length (not equivalent length) multiplied by the per foot value.
1
2
3
Type 2-Stage Scroll 2-Stage Scroll 2-Stage Scroll 2-Stage Scroll Rated Load 11.8 15.2 21.1 27.3 Locked Rotor 58 83 104 153
4
Rated HP 1/3 1/3 1/3 1/3 Rated Load Amps 2.8 2.8 2.8 2.8 Nominal RPM 685 685 685 685 Nominal CFM 2990 3345 3300 3460 Face Area Sq. Ft. 23.6 23.6 23.6 23.6 Rows Deep 2222 Fins / Inch 16 16 14 14
5
YZH02412C YZH03612C YZH04812C YZH06012C
187 to 252
25 35 50 60 20 25 30 40
No No No No
14 - 15 11 - 8 13 - 1 14 - 4
Unit
Model
Dimensions
(Inches)
A B C Liquid Vapor
24 40 42-1/4 34 36 40 42-1/4 34 48 40 42-1/4 34 60 40 42-1/4 34
All dimensions are in inches and are subject to change without notice. Overall height is from bottom of base pan to top of fan guard.
Overall length and width include screw heads.
2 Johnson Controls Unitary Products
Refrigerant Connection
Service Valve Size
3/4
3/8
7/8
Page 3
1109431-YTG-A-0714
System Charge for Various Matched Systems
Outdoor Unit YZH02412C YZH03612C YZH04812C YZH06012C Required TXV
1
4G1 4G1 4H1 4K1
Indoor Unit
2,3,4
TXV Kit5 - Additional Charge, Oz
AHE42D –17– – AHE60D – – 13 23 AHV24B 0 – – – AHV30B 0 – – – AHV36C 0 0 – – AHV42D –17– – AHV48D –180 – AHV60D – – 13 23 FC/MC/PC37 00–– FC/MC/PC43 00–– FC/MC/PC48 24 17 10 – FC/MC/PC60 33 18 0 0 FC/MC62 – 44 13 23 FC64 – 55 35 34 UC48 241710 – UC60 33 18 0 0 Some of the combinations shown in the above System Charge table require Advanced Main Air Circulating Fan indoor product. For approved coil
only matches, please see the “COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils” table.
FOOTNOTES:
1. For applications requiring a TXV use S1-1TVM*** series kit.
2. A TXV kit must be used with these indoor units to obtain system performance.
3. Systems matched with furnaces or air handlers not equipped with blower-off delays may require blower Time Delay Kit S1-2FD06700224.
4. PC coils cannot be used in downflow or horizontal applications. FC coils cannot be used in horizontal applications.
5. Refer to Cooling and Heating Performance Data tables for actual performance for specified system matches.
PROCEDURES
1. Unit factory charge listed on the unit nameplate includes ref rigerant for the ou tdoo r unit, the smallest matched i ndoor unit, and 15 f eet of int erconnecti ng line tubing .
2. Verify the TXV and additional charge required for specific matched indoor unit in the system using the above table.
3. Add additional charge for the amount of interconnecting line tubi ng greater than 15 feet at the rate specified in Physical and Electrical Data Table.
4. For indoor matches requiring additional charge, the refrigerant needs to be weighed in for specific matched indoor unit and actual lineset length.
5. Permanently mark the unit nameplate with the total system charge. Total System Charge = Base Charge (as shipped) + charge adder for matched indoor unit + charge adder for actual lineset length.
Johnson Controls Unitary Products 3
Page 4
1109431-YTG-A-0714
COOLING CAPACITY - With Air Handler Coils
UNIT
MODEL
YZH02412C
YZH03612C
For notes, see Page 5.
AIR HANDLER
MODEL WIDTH STAGE
18 SEER HP WITH AIR HANDLERS
AHV24B 17.5 –
AHV30B 17.5 –
AHV36C 21.0 –
MV12B 17.5 FC/MC43B
MV12D 24.5 FC/MC48D
MV12D 24.5 FC/MC60D
AHE42D 24.5 –
AHV36C 21.0 –
AHV42D 24.5 –
AHV48D 24.5 –
MV12B 17.5 FC/MC43B
MV12D 24.5 FC/MC48D
MV12D 24.5 FC/MC60D
MV12D 24.5 FC/MC62D
MV12D 24.5 FC64D
MV16C 21.0 FC/MC43C
MV16C 21.0 FC/MC48C
MV20D 24.5 FC/MC48D
MV20D 24.5 FC/MC60D
MV20D 24.5 FC/MC62D
MV20D 24.5 FC64D
MX12BN21 17.5 FC/MC43B
MX12DN21 24.5 FC/MC48D
MX12DN21 24.5 FC/MC60D
MX12DN21 24.5 FC64D
COIL
MODEL
1
1 470 19.7 13.6 2 710 22.6 15.6 13.00 1 500 19.9 13.8 2 775 22.8 16.2 13.00 1 485 20.1 13.9 2 760 23.0 16.4 13.50 1 620 20.5 14.2 2 800 23.4 16.8 13.50 1 595 20.5 14.1 2 905 24.0 18.0 14.00 1 645 20.5 14.2 2 835 23.8 17.3 14.00 1 685 28.2 18.4 2 1180 35.4 25.5 13.75 1 785 29.0 19.5 2 1215 35.2 25.5 13.25 1 790 29.2 19.6 2 1180 35.4 25.5 13.75 1 835 29.6 20.0 2 1155 35.6 25.3 13.75 1 805 29.2 19.6 2 1225 35.4 25.7 13.25 1 785 29.2 19.5 2 1160 35.4 25.5 13.75 1 735 28.6 18.8 2 1135 35.2 24.9 13.50 1 770 29.0 19.4 2 1235 36.0 26.6 14.00 1 780 30.2 20.2 2 1155 36.6 26.7 14.25 1 775 28.8 19.2 2 1200 35.4 25.5 13.50 1 775 29.2 19.5 2 1200 35.2 25.3 13.50 1 860 29.6 20.4 2 1300 36.0 26.9 13.75 1 2 1300 36.2 26.7 13.75 1 860 29.6 20.4 2 1300 36.4 27.3 14.00 1 860 30.6 21.0 2 1300 37.3 28.1 14.25 1 740 28.8 19.2 2 1125 34.8 24.6 13.00 1 830 29.6 20.0 2 1125 35.2 25.1 13.75 1 845 29.6 20.0 2 1150 35.6 25.3 14.00 1 880 30.8 21.4 2 1175 36.8 26.7 14.25
RATED
CFM
860 29.8 20.2
COOLING
NET MBH
TOTAL SENS.
SEER EER
16.25
16.50
16.75
16.75
17.25
17.50
17.25
17.75
18.25
18.50
17.50
18.00
17.50
18.00
18.50
17.25
18.00
18.00
18.00
18.00
18.75
17.25
18.25
18.25
19.00
20.00
20.25
21.00
22.00
22.50
22.50
22.75
23.25
24.00
24.25
23.00
23.50
22.75
23.50
24.50
22.50
23.50
23.50
23.75
23.50
24.75
22.50
24.00
24.00
25.25
4 Johnson Controls Unitary Products
Page 5
1109431-YTG-A-0714
COOLING CAPACITY - With Air Handler Coils (Continued)
UNIT
MODEL
AIR HANDLER
MODEL WIDTH STAGE
COIL
MODEL
1
RATED
CFM
18 SEER HP WITH AIR HANDLERS
AHE60D 24.5 –
AHV48D 24.5 –
AHV60D 24.5 –
MV16C 21.0 FC/MC48C
MV16C 21.0 FC60C
YZH04812C
MV20D 24.5 FC/MC48D
MV20D 24.5 FC/MC60D
MV20D 24.5 FC/MC62D
MV20D 24.5 FC64D
MX16CN21 21.0 FC/MC48C
MX16CN21 21.0 FC60C
AHE60D 24.5 –
AHV60D 24.5 –
YZH06012C
MV20D 24.5 FC/MC60D
MV20D 24.5 FC/MC62D
MV20D 24.5 FC64D
Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ANSI/AHRI Standard 210/240. Cooling MBH based on 80°F entering air temperature, 50% RH (Relative Humidity), and rated air flow. EER (Energy Efficiency Ratio) is the total cooling output in BTUs at 95°F (for hi gh st age oper ation) or 67°F (for low stage operation) outdoor ambient divided by the total electric power in watt-hours at those conditions. SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTUs during a normal annual usage period for cooling divided by the total electric power input in watt-hours during the same period.
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.
— = Not applicable. MA Modular Air Handlers use Coil Only Ratings.
1 1160 39.5 27.3 2 1565 45.5 33.6 12.50 1 1010 39.0 25.5 2 1585 45.5 32.8 12.00 1 1000 38.5 25.7 2 1570 45.5 33.4 12.00 1 1035 39.0 25.9 2 1625 45.5 33.2 12.00 1 1035 39.0 25.7 2 1625 45.5 33.2 12.00 1 1025 39.0 25.9 2 1620 45.5 33.4 12.25 1 1020 39.0 25.7 2 1600 45.5 33.2 12.00 1 1085 39.0 26.5 2 1645 46.0 34.5 12.50 1 1075 40.5 27.5 2 1630 47.0 35.2 12.50 1 1015 39.0 25.9 2 1600 45.0 33.2 12.00 1 1020 39.0 25.7 2 1600 45.5 33.2 12.00 1 1160 46.5 29.5 2 1835 57.0 40.5 11.75 1 1090 46.0 28.9 2 1635 56.0 38.0 11.75 1 1160 47.0 29.3 2 1845 56.5 39.0 11.75 1 1185 47.0 30.1 2 1845 57.0 40.5 12.00 1 1160 48.5 30.7 2 1855 58.0 41.5 11.75
COOLING
NET MBH
TOTAL SENS.
SEER EER
16.75
16.75
16.75
16.50
16.50
16.50
16.50
17.00
17.50
16.50
16.50
15.25
15.25
15.00
15.50
15.75
22.50
22.75
22.50
22.25
22.25
22.25
22.25
23.00
24.00
22.25
22.25
21.00
21.00
21.00
21.50
22.00
Johnson Controls Unitary Products 5
Page 6
1109431-YTG-A-0714
COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils (Coil Only Ratings)
UNIT MODEL
COIL
MODEL WIDTH STAGE
CFM RANGE
(MIN.-MAX.)
18 SEER HP COIL ONLY RATINGS
YZH02412C FC/MC/PC48 21.0,24.5
YZH03612C FC/MC62 24.5
YZH04812C FC/MC62 24.5
YZH06012C FC/MC62 24.5
1. Requires a 2FD06700224 Blower Time Delay unless a standard furnace is equipped with one. MA Modular Air Handlers use Coil Only Ratings.
PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings.
550 – 650 1 600 19.7 13.6 650 – 950 2 800 22.8 16.3 11.75
800 – 1000 1 900 29.2 20.0 1000 – 1400 2 1200 35.2 25.5 12.50 1000 – 1400 1 1200 39.0 26.9 1400 – 1800 2 1600 45.0 33.2 11.50 1150 – 1550 1 1350 47.0 30.9 1600 – 2000 2 1800 56.0 39.5 11.25
RATED
CFM
COOLING NET MBH
TOTAL SENS.
COOLING CAP ACITY - With High Efficiency Motor Furnaces
UNIT
MODEL
YZH02412C
For notes, see Page 23.
MODEL
FURNACE
WIDTH STAGE
COIL
MODEL
1
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
T*(8,L)V*A12 14.5 FC/MC/PC37A
T*(8,L)V*B12 17.5 FC/MC/PC43B
T*(8,L)V*C16 21.0 FC/MC/PC43C
T*9V*A10 14.5 FC/MC/PC37A
T*9V*B12 17.5 FC/MC/PC43B
T*9V*C16 21.0 FC/MC/PC48C
T*9V*C16 21.0 FC/PC60C
T*9V*C16 21.0 UC48C
T*9V*C16 21.0 UC60C
T*9V*C20 21.0 FC/MC/PC43C
T*9V*C20 21.0 FC/MC/PC48C
T*9V*C20 21.0 UC48C
TM8X080C16MP11 21.0 FC/MC/PC43C
TM8X080C16MP11 21.0 FC/MC/PC48C
TM8X080C16MP11 21.0 FC/PC60C
TM8X080C16MP11 21.0 UC48C
TM8X080C16MP11 21.0 UC60C
RATED
CFM
1 585 20.5 14.1 2 765 23.0 16.4 13.25 1 515 20.1 13.9 2 790 23.2 16.7 13.50 1 645 20.7 14.3 2 770 23.2 16.6 13.50 1 570 20.1 14.0 2 790 23.0 16.4 12.50 1 550 20.3 14.1 2 800 23.2 16.7 13.25 1 635 20.7 14.3 2 890 23.8 17.7 13.50 1 635 20.5 14.2 2 890 24.0 17.8 13.75 1 635 21.1 14.6 2 890 23.8 17.8 13.50 1 635 20.5 14.2 2 890 24.0 17.8 13.75 1 630 20.7 14.3 2 890 23.8 17.8 13.50 1 630 20.7 14.3 2 890 23.8 17.7 13.50 1 630 21.1 14.6 2 890 23.8 17.8 13.50 1 630 20.5 14.2 2 800 23.2 16.6 12.75 1 630 20.5 14.2 2 800 23.2 16.6 12.75 1 630 20.5 14.2 2 800 23.4 17.0 12.75 1 630 20.9 14.4 2 800 23.0 16.6 12.75 1 630 20.5 14.2 2 800 23.4 17.0 12.75
COOLING NET MBH
TOTAL SENS.
2
1
SEER
14.75
15.50
14.75
13.75
SEER EER
16.75
16.00
17.00
16.00
16.75
17.25
17.50
16.75
17.50
17.25
17.25
16.75
16.75
16.75
17.50
16.25
17.50
EER
21.00
19.50
19.25
18.50
21.75
21.00
22.25
21.25
21.50
22.75
22.50
23.75
22.50
22.25
22.75
23.75
22.00
22.50
22.50
23.25
22.50
6 Johnson Controls Unitary Products
Page 7
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH02412C
For notes, see Page 23.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
TM8X100C16MP11 21.0 FC/MC/PC43C
TM8X100C16MP11 21.0 FC/MC/PC48C
TM8X100C16MP11 21.0 FC/PC60C
TM8X100C16MP11 21.0 UC48C
TM8X100C16MP11 21.0 UC60C
TMLX080C16MP11 21.0 FC/MC/PC43C
TMLX080C16MP11 21.0 FC/MC/PC48C
TMLX080C16MP11 21.0 FC/PC60C
TMLX080C16MP11 21.0 UC48C
TMLX080C16MP11 21.0 UC60C
TMLX100C16MP11 21.0 FC/MC/PC43C
TMLX100C16MP11 21.0 FC/MC/PC48C
TMLX100C16MP11 21.0 FC/PC60C
TMLX100C16MP11 21.0 UC48C
TMLX100C16MP11 21.0 UC60C
Y*LC*A12 14.5 FC/MC/PC37A
Y*LC*B12 17.5 FC/MC/PC43B
Y*LC*C16 21.0 FC/MC/PC43C
Y*9C*B12 17.5 FC/MC/PC43B
Y*9C*C16 21.0 FC/MC/PC48C
Y*9C*C16 21.0 FC/PC60C
Y*9C*C16 21.0 UC48C
Y*9C*C16 21.0 UC60C
Y*9C*C20 21.0 FC/MC/PC43C
Y*9C*C20 21.0 FC/MC/PC48C
Y*9C*C20 21.0 UC48C
WIDTH STAGE
COIL
MODEL
1
1 630 20.5 14.2 2 800 23.2 16.6 12.75 1 630 20.5 14.2 2 800 23.2 16.6 12.75 1 630 20.5 14.2 2 800 23.4 17.0 12.75 1 630 20.9 14.4 2 800 23.0 16.6 12.75 1 630 20.5 14.2 2 800 23.4 17.0 12.75 1 630 20.5 14.2 2 800 23.2 16.6 12.75 1 630 20.5 14.2 2 800 23.2 16.6 12.75 1 630 20.5 14.2 2 800 23.4 17.0 12.75 1 630 20.9 14.4 2 800 23.0 16.6 12.75 1 630 20.5 14.2 2 800 23.4 17.0 12.75 1 630 20.5 14.2 2 800 23.2 16.6 12.75 1 630 20.5 14.2 2 800 23.2 16.6 12.75 1 630 20.5 14.2 2 800 23.4 17.0 12.75 1 630 20.9 14.4 2 800 23.0 16.6 12.75 1 630 20.5 14.2 2 800 23.4 17.0 12.75 1 585 20.5 14.1 2 765 23.0 16.4 13.25 1 515 20.1 13.9 2 790 23.2 16.7 13.50 1 645 20.7 14.3 2 770 23.2 16.6 13.50 1 550 20.3 14.1 2 800 23.2 16.7 13.25 1 635 20.7 14.3 2 890 23.8 17.7 13.50 1 2 890 24.0 17.8 13.75 1 635 21.1 14.6 2 890 23.8 17.8 13.50 1 635 20.5 14.2 2 890 24.0 17.8 13.75 1 630 20.7 14.3 2 890 23.8 17.8 13.50 1 630 20.7 14.3 2 890 23.8 17.7 13.50 1 630 21.1 14.6 2 890 23.8 17.8 13.50
COOLING
RATED
CFM
635 20.5 14.2
NET MBH
TOTAL SENS.
2
1109431-YTG-A-0714
SEER EER
16.75
16.75
17.50
16.25
17.50
16.75
16.75
17.50
16.25
17.50
16.75
16.75
17.50
16.25
17.50
16.75
16.00
17.00
16.75
17.25
17.50
16.75
17.50
17.25
17.25
16.75
22.00
22.50
22.50
23.25
22.50
22.00
22.50
22.50
23.25
22.50
22.00
22.50
22.50
23.25
22.50
21.75
21.00
22.25
21.50
22.75
22.50
23.75
22.50
22.25
22.75
23.75
Johnson Controls Unitary Products 7
Page 8
1109431-YTG-A-0714
COOLING CAP ACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH03612C
For notes, see Page 23.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
T*(8,L)V*A12 14.5 FC/MC/PC37A
T*(8,L)V*B12 17.5 FC/MC/PC43B
T*(8,L)V*C16 21.0 FC/MC/PC43C
T*(8,L)V*C16 21.0 FC/MC/PC48C
T*(8,L)V*C16 21.0 FC/PC60C
T*(8,L)V*C16 21.0 UC48C
T*(8,L)V*C16 21.0 UC60C
T*(8,L)V*C20 21.0 FC/MC/PC43C
T*(8,L)V*C20 21.0 FC/MC/PC48C
T*(8,L)V*C20 21.0 FC/PC60C
T*(8,L)V*C20 21.0 UC48C
T*(8,L)V*C20 21.0 UC60C
T*9V*B12 17.5 FC/MC/PC43B
T*9V*C16 21.0 FC/MC/PC43C
T*9V*C16 21.0 FC/MC/PC48C
T*9V*C16 21.0 FC/PC60C
T*9V*C16 21.0 UC48C
T*9V*C16 21.0 UC60C
T*9V*C20 21.0 FC/MC/PC43C
T*9V*C20 21.0 FC/MC/PC48C
T*9V*C20 21.0 FC/PC60C
T*9V*C20 21.0 UC48C
T*9V*C20 21.0 UC60C
T*9V*D20 24.5 FC/MC/PC48D
T*9V*D20 24.5 FC/MC/PC60D
WIDTH STAGE
COIL
MODEL
1
1 730 28.2 18.5 2 1150 34.6 24.5 12.50 1 860 29.4 20.0 2 1275 35.2 25.7 12.50 1 770 28.8 19.2 2 1190 35.2 25.3 13.25 1 725 28.4 18.6 2 1195 35.6 25.7 13.50 1 710 28.6 18.8 2 1185 35.4 25.1 13.50 1 810 28.8 19.4 2 1210 35.8 25.9 13.50 1 810 28.8 19.4 2 1195 35.2 25.3 13.50 1 740 28.6 18.8 2 1190 35.2 25.3 13.25 1 715 28.4 18.6 2 1150 35.2 25.1 13.50 1 800 29.2 19.6 2 1215 35.8 25.7 13.50 1 720 28.2 18.3 2 1155 35.6 25.3 13.75 1 800 28.8 19.4 2 1215 35.2 25.3 13.50 1 815 29.2 19.6 2 1200 34.8 25.1 12.75 1 815 29.2 19.6 2 1240 35.2 25.7 13.00 1 780 29.2 19.5 2 1195 35.0 25.1 13.25 1 810 29.4 19.6 2 1235 35.6 25.7 13.25 1 780 28.6 19.1 2 1195 35.4 25.1 13.25 1 810 29.0 19.4 2 1235 35.2 25.7 13.00 1 780 28.8 19.3 2 1200 35.2 25.3 13.25 1 745 28.8 18.9 2 1330 36.0 26.7 13.00 1 2 1330 36.2 26.7 13.25 1 755 28.4 18.7 2 1330 36.0 26.9 13.00 1 770 28.6 19.0 2 1330 35.8 26.5 13.00 1 830 29.4 19.8 2 1240 35.6 26.1 13.50 1 830 29.6 19.8 2 1225 35.8 25.9 13.50
COOLING
RATED
CFM
770 29.0 19.2
NET MBH
TOTAL SENS.
2
SEER EER
16.50
17.00
17.25
17.00
17.50
17.50
17.75
17.25
17.25
17.75
17.25
17.75
17.25
17.25
18.00
17.50
17.75
17.25
17.25
17.25
17.50
17.25
17.25
17.75
17.75
21.50
22.25
22.50
22.25
22.75
22.50
23.50
22.50
22.50
23.00
22.25
23.50
22.25
22.50
23.50
22.75
23.00
22.50
22.75
22.50
23.00
22.00
22.50
23.00
23.25
8 Johnson Controls Unitary Products
Page 9
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH03612C
For notes, see Page 23.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
T*9V*D20 24.5 FC/MC62D
T*9V*D20 24.5 FC64D
T*9V*D20 24.5 UC48D
T*9V*D20 24.5 UC60D
TM8X060A12MP11 14.5 FC/MC/PC37A
TM8X080B12MP11 17.5 FC/MC/PC43B
TM8X080C16MP11 21.0 FC/MC/PC43C
TM8X080C16MP11 21.0 FC/MC/PC48C
TM8X080C16MP11 21.0 FC/MC/PC48D
TM8X080C16MP11 21.0 FC/MC/PC60D
TM8X080C16MP11 21.0 FC/MC62D
TM8X080C16MP11 21.0 FC/PC60C
TM8X080C16MP11 21.0 FC64D
TM8X080C16MP11 21.0 UC48C
TM8X080C16MP11 21.0 UC48D
TM8X080C16MP11 21.0 UC60C
TM8X080C16MP11 21.0 UC60D
TM8X100C16MP11 21.0 FC/MC/PC43C
TM8X100C16MP11 21.0 FC/MC/PC48C
TM8X100C16MP11 21.0 FC/MC/PC48D
TM8X100C16MP11 21.0 FC/MC/PC60D
TM8X100C16MP11 21.0 FC/MC62D
TM8X100C16MP11 21.0 FC/PC60C
TM8X100C16MP11 21.0 FC64D
TM8X100C16MP11 21.0 UC48C
WIDTH STAGE
COIL
MODEL
1
1 835 29.4 20.0 2 1235 35.8 26.5 13.50 1 835 30.4 20.8 2 1235 36.8 27.1 13.75 1 830 29.0 19.5 2 1240 35.8 26.1 13.50 1 830 29.0 19.6 2 1225 35.4 25.7 13.25 1 770 28.8 19.2 2 1125 34.6 24.4 12.75 1 805 28.8 19.2 2 1175 34.6 24.4 12.75 1 775 28.8 19.2 2 1150 34.8 24.6 13.25 1 775 29.2 19.5 2 1150 35.2 25.3 13.50 1 805 29.2 19.5 2 1175 35.2 25.3 13.50 1 800 29.4 19.6 2 1175 35.4 25.3 13.50 1 785 29.2 19.6 2 1175 35.6 25.9 13.50 1 790 29.2 19.4 2 1175 35.4 25.3 13.50 1 795 30.2 20.2 2 1175 36.4 26.5 13.75 1 775 28.6 19.1 2 1150 35.4 25.3 13.50 1 805 28.6 19.1 2 1175 35.4 25.3 13.50 1 790 28.8 19.4 2 1175 35.2 25.3 13.25 1 800 28.8 19.4 2 1175 35.2 25.3 13.50 1 775 28.8 19.2 2 1150 34.8 24.6 13.25 1 775 29.2 19.5 2 1150 35.2 25.3 13.50 1 805 29.2 19.5 2 1175 35.2 25.3 13.50 1 2 1175 35.4 25.3 13.50 1 785 29.2 19.6 2 1175 35.6 25.9 13.50 1 790 29.2 19.4 2 1175 35.4 25.3 13.50 1 795 30.2 20.2 2 1175 36.4 26.5 13.75 1 775 28.6 19.1 2 1150 35.4 25.3 13.50
COOLING
RATED
CFM
800 29.4 19.6
NET MBH
TOTAL SENS.
2
1109431-YTG-A-0714
SEER EER
17.75
18.25
17.50
17.50
17.25
17.25
17.25
18.00
18.00
18.25
18.00
18.00
18.50
17.75
17.75
17.75
17.75
17.25
18.00
18.00
18.25
18.00
18.00
18.50
17.75
23.00
24.00
22.50
22.75
22.50
22.50
22.50
23.50
23.50
23.75
23.50
23.75
24.50
23.00
23.00
23.50
23.50
22.50
23.50
23.50
23.75
23.50
23.75
24.50
23.00
Johnson Controls Unitary Products 9
Page 10
1109431-YTG-A-0714
COOLING CAP ACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH03612C
For notes, see Page 23.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
TM8X100C16MP11 21.0 UC48D
TM8X100C16MP11 21.0 UC60C
TM8X100C16MP11 21.0 UC60D
TMLX060A12MP11 14.5 FC/MC/PC37A
TMLX080B12MP11 17.5 FC/MC/PC43B
TMLX080C16MP11 21.0 FC/MC/PC43C
TMLX080C16MP11 21.0 FC/MC/PC48C
TMLX080C16MP11 21.0 FC/MC/PC48D
TMLX080C16MP11 21.0 FC/MC/PC60D
TMLX080C16MP11 21.0 FC/MC62D
TMLX080C16MP11 21.0 FC/PC60C
TMLX080C16MP11 21.0 FC64D
TMLX080C16MP11 21.0 UC48C
TMLX080C16MP11 21.0 UC48D
TMLX080C16MP11 21.0 UC60C
TMLX080C16MP11 21.0 UC60D
TMLX100C16MP11 21.0 FC/MC/PC43C
TMLX100C16MP11 21.0 FC/MC/PC48C
TMLX100C16MP11 21.0 FC/MC/PC48D
TMLX100C16MP11 21.0 FC/MC/PC60D
TMLX100C16MP11 21.0 FC/MC62D
TMLX100C16MP11 21.0 FC/PC60C
TMLX100C16MP11 21.0 FC64D
TMLX100C16MP11 21.0 UC48C
TMLX100C16MP11 21.0 UC48D
WIDTH STAGE
COIL
MODEL
1
1 805 28.6 19.1 2 1175 35.4 25.3 13.50 1 790 28.8 19.4 2 1175 35.2 25.3 13.25 1 800 28.8 19.4 2 1175 35.2 25.3 13.50 1 770 28.8 19.2 2 1125 34.6 24.4 12.75 1 805 28.8 19.2 2 1175 34.6 24.4 12.75 1 775 28.8 19.2 2 1150 34.8 24.6 13.25 1 775 29.2 19.5 2 1150 35.2 25.3 13.50 1 805 29.2 19.5 2 1175 35.2 25.3 13.50 1 800 29.4 19.6 2 1175 35.4 25.3 13.50 1 785 29.2 19.6 2 1175 35.6 25.9 13.50 1 790 29.2 19.4 2 1175 35.4 25.3 13.50 1 795 30.2 20.2 2 1175 36.4 26.5 13.75 1 775 28.6 19.1 2 1150 35.4 25.3 13.50 1 805 28.6 19.1 2 1175 35.4 25.3 13.50 1 790 28.8 19.4 2 1175 35.2 25.3 13.25 1 800 28.8 19.4 2 1175 35.2 25.3 13.50 1 775 28.8 19.2 2 1150 34.8 24.6 13.25 1 775 29.2 19.5 2 1150 35.2 25.3 13.50 1 805 29.2 19.5 2 1175 35.2 25.3 13.50 1 800 29.4 19.6 2 1175 35.4 25.3 13.50 1 2 1175 35.6 25.9 13.50 1 790 29.2 19.4 2 1175 35.4 25.3 13.50 1 795 30.2 20.2 2 1175 36.4 26.5 13.75 1 775 28.6 19.1 2 1150 35.4 25.3 13.50 1 805 28.6 19.1 2 1175 35.4 25.3 13.50
COOLING
RATED
CFM
785 29.2 19.6
NET MBH
TOTAL SENS.
2
SEER EER
17.75
17.75
17.75
17.25
17.25
17.25
18.00
18.00
18.25
18.00
18.00
18.50
17.75
17.75
17.75
17.75
17.25
18.00
18.00
18.25
18.00
18.00
18.50
17.75
17.75
23.00
23.50
23.50
22.50
22.50
22.50
23.50
23.50
23.75
23.50
23.75
24.50
23.00
23.00
23.50
23.50
22.50
23.50
23.50
23.75
23.50
23.75
24.50
23.00
23.00
10 Johnson Controls Unitary Products
Page 11
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH03612C
For notes, see Page 23.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
TMLX100C16MP11 21.0 UC60C
TMLX100C16MP11 21.0 UC60D
TM9E060B12MP11 17.5 FC/MC/PC43B
TM9E080B12MP11 17.5 FC/MC/PC43B
TM9E080C16MP11 21.0 FC/MC/PC48D
TM9E080C16MP11 21.0 FC/MC62D
TM9E080C16MP11 21.0 FC64D
TM9E080C16MP11 21.0 UC48D
TM9E100C16MP11 21.0 FC/MC/PC48D
TM9E100C16MP11 21.0 FC/MC62D
TM9E100C16MP11 21.0 FC64D
TM9E100C16MP11 21.0 UC48D
TM9X060B12MP11 17.5 FC/MC/PC43B
TM9X080B12MP11 17.5 FC/MC/PC43B
TM9X080C16MP11 21.0 FC/MC/PC48D
TM9X080C16MP11 21.0 FC/MC62D
TM9X080C16MP11 21.0 FC64D
TM9X080C16MP11 21.0 UC48D
TM9X100C16MP11 21.0 FC/MC/PC48D
TM9X100C16MP11 21.0 FC/MC62D
TM9X100C16MP11 21.0 FC64D
TM9X100C16MP11 21.0 UC48D
Y*LC*A12 14.5 FC/MC/PC37A
Y*LC*B12 17.5 FC/MC/PC43B
Y*LC*C16 21.0 FC/MC/PC43C
WIDTH STAGE
COIL
MODEL
1
1 790 28.8 19.4 2 1175 35.2 25.3 13.25 1 800 28.8 19.4 2 1175 35.2 25.3 13.50 1 730 28.4 18.7 2 1125 34.6 24.4 12.75 1 730 28.4 18.7 2 1125 34.6 24.4 12.75 1 775 29.2 19.5 2 1175 35.0 25.1 13.25 1 765 29.0 19.3 2 1175 35.4 25.7 13.25 1 775 30.2 20.2 2 1175 36.4 26.3 13.75 1 775 28.6 19.1 2 1175 35.4 25.1 13.25 1 775 29.2 19.5 2 1175 35.0 25.1 13.25 1 765 29.0 19.3 2 1175 35.4 25.7 13.25 1 775 30.2 20.2 2 1175 36.4 26.3 13.75 1 775 28.6 19.1 2 1175 35.4 25.1 13.25 1 730 28.4 18.7 2 1125 34.6 24.4 12.75 1 730 28.4 18.7 2 1125 34.6 24.4 12.75 1 775 29.2 19.5 2 1175 35.0 25.1 13.25 1 765 29.0 19.3 2 1175 35.4 25.7 13.25 1 775 30.2 20.2 2 1175 36.4 26.3 13.75 1 775 28.6 19.1 2 1175 35.4 25.1 13.25 1 775 29.2 19.5 2 1175 35.0 25.1 13.25 1 765 29.0 19.3 2 1175 35.4 25.7 13.25 1 2 1175 36.4 26.3 13.75 1 775 28.6 19.1 2 1175 35.4 25.1 13.25 1 730 28.2 18.5 2 1150 34.6 24.5 12.50 1 860 29.4 20.0 2 1275 35.2 25.7 12.50 1 770 28.8 19.2 2 1190 35.2 25.3 13.25
COOLING
RATED
CFM
775 30.2 20.2
NET MBH
TOTAL SENS.
2
1109431-YTG-A-0714
SEER EER
17.75
17.75
17.25
17.25
18.00
17.75
18.50
17.75
18.00
17.75
18.50
17.75
17.25
17.25
18.00
17.75
18.50
17.75
18.00
17.75
18.50
17.75
16.50
17.00
17.25
23.50
23.50
22.50
22.50
23.50
23.25
24.50
23.00
23.50
23.25
24.50
23.00
22.50
22.50
23.50
23.25
24.50
23.00
23.50
23.25
24.50
23.00
21.50
22.25
22.50
Johnson Controls Unitary Products 11
Page 12
1109431-YTG-A-0714
COOLING CAP ACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH03612C
For notes, see Page 23.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
Y*LC*C16 21.0 FC/MC/PC48C
Y*LC*C16 21.0 FC/PC60C
Y*LC*C16 21.0 UC48C
Y*LC*C16 21.0 UC60C
Y*LC*C20 21.0 FC/MC/PC43C
Y*LC*C20 21.0 FC/MC/PC48C
Y*LC*C20 21.0 FC/PC60C
Y*LC*C20 21.0 UC48C
Y*LC*C20 21.0 UC60C
Y*9C*B12 17.5 FC/MC/PC43B
Y*9C*C16 21.0 FC/MC/PC43C
Y*9C*C16 21.0 FC/MC/PC48C
Y*9C*C16 21.0 FC/PC60C
Y*9C*C16 21.0 UC48C
Y*9C*C16 21.0 UC60C
Y*9C*C20 21.0 FC/MC/PC43C
Y*9C*C20 21.0 FC/MC/PC48C
Y*9C*C20 21.0 FC/PC60C
Y*9C*C20 21.0 UC48C
Y*9C*C20 21.0 UC60C
Y*9C*D20 24.5 FC/MC/PC48D
Y*9C*D20 24.5 FC/MC/PC60D
Y*9C*D20 24.5 FC/MC62D
Y*9C*D20 24.5 FC64D
Y*9C*D20 24.5 UC48D
Y*9C*D20 24.5 UC60D
WIDTH STAGE
COIL
MODEL
1
1 725 28.4 18.6 2 1195 35.6 25.7 13.50 1 710 28.6 18.8 2 1185 35.4 25.1 13.50 1 810 28.8 19.4 2 1210 35.8 25.9 13.50 1 810 28.8 19.4 2 1195 35.2 25.3 13.50 1 740 28.6 18.8 2 1190 35.2 25.3 13.25 1 715 28.4 18.6 2 1150 35.2 25.1 13.50 1 800 29.2 19.6 2 1215 35.8 25.7 13.50 1 720 28.2 18.3 2 1155 35.6 25.3 13.75 1 800 28.8 19.4 2 1215 35.2 25.3 13.50 1 815 29.2 19.6 2 1200 34.8 25.1 12.75 1 815 29.2 19.6 2 1240 35.2 25.7 13.00 1 780 29.2 19.5 2 1195 35.0 25.1 13.25 1 810 29.4 19.6 2 1235 35.6 25.7 13.25 1 780 28.6 19.1 2 1195 35.4 25.1 13.25 1 810 29.0 19.4 2 1235 35.2 25.7 13.00 1 780 28.8 19.3 2 1200 35.2 25.3 13.25 1 745 28.8 18.9 2 1330 36.0 26.7 13.00 1 770 29.0 19.2 2 1330 36.2 26.7 13.25 1 755 28.4 18.7 2 1330 36.0 26.9 13.00 1 770 28.6 19.0 2 1330 35.8 26.5 13.00 1 2 1240 35.6 26.1 13.50 1 830 29.6 19.8 2 1225 35.8 25.9 13.50 1 835 29.4 20.0 2 1235 35.8 26.5 13.50 1 835 30.4 20.8 2 1235 36.8 27.1 13.75 1 830 29.0 19.5 2 1240 35.8 26.1 13.50 1 830 29.0 19.6 2 1225 35.4 25.7 13.25
COOLING
RATED
CFM
830 29.4 19.8
NET MBH
TOTAL SENS.
2
SEER EER
17.00
17.50
17.50
17.75
17.25
17.25
17.75
17.25
17.75
17.25
17.25
18.00
17.50
17.75
17.25
17.25
17.25
17.50
17.25
17.25
17.75
17.75
17.75
18.25
17.50
17.50
22.25
22.75
22.50
23.50
22.50
22.50
23.00
22.25
23.50
22.25
22.50
23.50
22.75
23.00
22.50
22.75
22.50
23.00
22.00
22.50
23.00
23.25
23.00
24.00
22.50
22.75
12 Johnson Controls Unitary Products
Page 13
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH04812C
For notes, see Page 23.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
T*(8,L)V*C16 21.0 FC/MC/PC48C
T*(8,L)V*C16 21.0 FC/MC/PC48D
T*(8,L)V*C16 21.0 FC/MC/PC60D
T*(8,L)V*C16 21.0 FC/MC62D
T*(8,L)V*C16 21.0 FC/PC60C
T*(8,L)V*C16 21.0 FC64D
T*(8,L)V*C16 21.0 UC48C
T*(8,L)V*C16 21.0 UC60C
T*(8,L)V*C20 21.0 FC/MC/PC48C
T*(8,L)V*C20 21.0 FC/MC/PC48D
T*(8,L)V*C20 21.0 FC/MC/PC60D
T*(8,L)V*C20 21.0 FC/MC62D
T*(8,L)V*C20 21.0 FC/PC60C
T*(8,L)V*C20 21.0 FC64D
T*(8,L)V*C20 21.0 UC48C
T*(8,L)V*C20 21.0 UC60C
T*9V*C16 21.0 FC/MC/PC48C
T*9V*C16 21.0 FC/MC/PC48D
T*9V*C16 21.0 FC/MC/PC60D
T*9V*C16 21.0 FC/MC62D
T*9V*C16 21.0 FC/PC60C
T*9V*C16 21.0 FC64D
T*9V*C16 21.0 UC48C
T*9V*C16 21.0 UC60C
T*9V*C20 21.0 FC/MC/PC48C
WIDTH STAGE
COIL
MODEL
1
1 1120 39.5 26.7 2 1565 44.5 32.2 11.25 1 1120 39.5 26.7 2 1565 44.5 32.2 11.25 1 1025 39.0 25.7 2 1600 45.0 33.0 11.50 1 1025 38.5 25.7 2 1635 45.5 34.0 11.75 1 1025 39.0 25.7 2 1600 45.0 33.0 11.50 1 1025 40.5 27.5 2 1635 46.5 35.0 12.00 1 1035 39.0 25.7 2 1615 45.0 33.0 11.50 1 1035 38.5 25.5 2 1625 45.0 32.8 11.75 1 1080 39.0 25.9 2 1640 45.0 33.0 11.50 1 1080 39.0 25.9 2 1640 45.0 33.0 11.50 1 1060 39.0 25.7 2 1625 45.5 33.0 11.75 1 1060 39.0 26.3 2 1620 45.5 33.8 12.00 1 1060 39.0 25.7 2 1625 45.5 33.0 11.75 1 1060 40.5 27.5 2 1630 47.0 35.0 12.25 1 1080 39.0 26.1 2 1640 45.5 33.2 11.50 1 1015 38.0 25.3 2 1605 45.0 32.8 12.00 1 1050 39.0 25.9 2 1590 45.0 33.0 11.50 1 1050 39.0 25.9 2 1590 45.0 33.0 11.50 1 1050 39.0 25.7 2 1590 45.0 33.0 11.50 1 1040 38.5 26.1 2 1590 45.5 33.4 11.75 1 2 1590 45.0 33.0 11.50 1 1040 40.5 27.5 2 1590 46.5 34.8 12.00 1 1050 39.0 25.9 2 1590 44.5 32.0 11.50 1 1050 38.0 25.3 2 1590 44.5 31.6 11.50 1 1055 39.0 25.9 2 1655 45.0 33.0 11.50
COOLING
RATED
CFM
1050 39.0 25.7
NET MBH
TOTAL SENS.
2
1109431-YTG-A-0714
SEER EER
16.25
16.25
16.50
16.25
16.50
17.50
16.25
16.25
16.50
16.50
16.50
16.25
16.50
17.50
16.25
16.25
16.50
16.50
16.50
16.25
16.50
17.50
16.50
16.25
16.50
21.75
21.75
22.25
21.75
22.25
24.00
21.75
21.75
22.25
22.25
22.25
22.00
22.25
24.00
21.75
21.75
22.25
22.25
22.25
21.75
22.25
24.00
22.25
22.00
22.25
Johnson Controls Unitary Products 13
Page 14
1109431-YTG-A-0714
COOLING CAP ACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH04812C
For notes, see Page 23.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
T*9V*C20 21.0 FC/MC/PC48D
T*9V*C20 21.0 FC/MC/PC60D
T*9V*C20 21.0 FC/MC62D
T*9V*C20 21.0 FC/PC60C
T*9V*C20 21.0 FC64D
T*9V*C20 21.0 UC48C
T*9V*C20 21.0 UC60C
T*9V*D20 24.5 FC/MC/PC48D
T*9V*D20 24.5 FC/MC/PC60D
T*9V*D20 24.5 FC/MC62D
T*9V*D20 24.5 FC64D
T*9V*D20 24.5 UC48D
T*9V*D20 24.5 UC60D
TM8X080C16MP11 21.0 FC/MC/PC48C
TM8X080C16MP11 21.0 FC/MC/PC48D
TM8X080C16MP11 21.0 FC/MC/PC60D
TM8X080C16MP11 21.0 FC/MC62D
TM8X080C16MP11 21.0 FC/PC60C
TM8X080C16MP11 21.0 FC64D
TM8X080C16MP11 21.0 UC48C
TM8X080C16MP11 21.0 UC48D
TM8X080C16MP11 21.0 UC60C
TM8X080C16MP11 21.0 UC60D
TM8X100C16MP11 21.0 FC/MC/PC48C
TM8X100C16MP11 21.0 FC/MC/PC48D
WIDTH STAGE
COIL
MODEL
1
1 1055 39.0 25.9 2 1655 45.0 33.0 11.50 1 1055 39.0 25.7 2 1655 45.0 33.0 11.50 1 1040 38.5 25.9 2 1655 45.5 33.8 11.50 1 1055 39.0 25.7 2 1655 45.0 33.0 11.50 1 1040 40.5 27.5 2 1655 46.5 34.8 11.75 1 1055 39.0 25.9 2 1655 45.5 33.2 11.50 1 1055 38.5 25.7 2 1655 45.0 33.0 11.50 1 1060 39.0 25.9 2 1645 45.0 33.0 11.50 1 1070 39.0 25.7 2 1615 45.0 33.0 11.75 1 1085 39.0 26.5 2 1630 45.5 33.8 11.75 1 1085 40.5 27.5 2 1630 46.5 34.8 12.00 1 1060 39.0 25.9 2 1645 45.5 33.2 11.50 1 1070 38.5 25.7 2 1615 45.0 32.6 11.50 1 1030 39.0 25.9 2 1525 44.5 32.0 11.50 1 1045 39.0 25.9 2 1550 45.0 33.0 11.75 1 1045 39.0 25.7 2 1550 45.5 33.0 11.75 1 1040 38.5 26.1 2 1550 45.5 33.0 11.75 1 1020 38.5 25.5 2 1525 44.5 32.0 11.50 1 1045 40.5 27.5 2 1550 46.5 34.8 12.00 1 1030 39.0 25.9 2 1525 45.0 32.0 11.50 1 2 1550 45.0 32.0 11.50 1 1020 38.0 25.3 2 1525 44.5 31.8 11.50 1 1045 38.0 25.3 2 1550 44.5 31.8 11.50 1 1030 39.0 25.9 2 1525 44.5 32.0 11.50 1 1045 39.0 25.9 2 1550 45.0 33.0 11.75
COOLING
RATED
CFM
1045 39.0 25.9
NET MBH
TOTAL SENS.
2
SEER EER
16.50
16.50
16.25
16.50
17.50
16.25
16.00
16.50
16.50
16.25
17.50
16.25
16.00
16.50
16.50
16.50
16.50
16.50
17.50
16.50
16.50
16.25
16.25
16.50
16.50
22.25
22.25
21.75
22.25
24.00
21.75
21.50
22.25
22.25
21.75
24.00
21.75
21.50
22.25
22.25
22.25
22.25
22.25
24.00
22.25
22.25
22.00
22.00
22.25
22.25
14 Johnson Controls Unitary Products
Page 15
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH04812C
For notes, see Page 23.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
TM8X100C16MP11 21.0 FC/MC/PC60D
TM8X100C16MP11 21.0 FC/MC62D
TM8X100C16MP11 21.0 FC/PC60C
TM8X100C16MP11 21.0 FC64D
TM8X100C16MP11 21.0 UC48C
TM8X100C16MP11 21.0 UC48D
TM8X100C16MP11 21.0 UC60C
TM8X100C16MP11 21.0 UC60D
TM8X100C20MP11 21.0 FC/MC/PC48C
TM8X100C20MP11 21.0 FC/MC/PC48D
TM8X100C20MP11 21.0 FC/MC/PC60D
TM8X100C20MP11 21.0 FC/MC62D
TM8X100C20MP11 21.0 FC/PC60C
TM8X100C20MP11 21.0 UC48C
TM8X100C20MP11 21.0 UC48D
TM8X100C20MP11 21.0 UC60C
TM8X100C20MP11 21.0 UC60D
TM8X120C20MP11 21.0 FC/MC/PC48C
TM8X120C20MP11 21.0 FC/MC/PC48D
TM8X120C20MP11 21.0 FC/MC/PC60D
TM8X120C20MP11 21.0 FC/MC62D
TM8X120C20MP11 21.0 FC/PC60C
TM8X120C20MP11 21.0 UC48C
TM8X120C20MP11 21.0 UC48D
TM8X120C20MP11 21.0 UC60C
WIDTH STAGE
COIL
MODEL
1
1 1045 39.0 25.7 2 1550 45.5 33.0 11.75 1 1040 38.5 26.1 2 1550 45.5 33.0 11.75 1 1020 38.5 25.5 2 1525 44.5 32.0 11.50 1 1045 40.5 27.5 2 1550 46.5 34.8 12.00 1 1030 39.0 25.9 2 1525 45.0 32.0 11.50 1 1045 39.0 25.9 2 1550 45.0 32.0 11.50 1 1020 38.0 25.3 2 1525 44.5 31.8 11.50 1 1045 38.0 25.3 2 1550 44.5 31.8 11.50 1 1090 39.0 26.5 2 1550 45.0 32.4 11.75 1 1105 39.5 26.7 2 1575 45.0 32.6 11.75 1 1105 39.5 26.5 2 1575 45.0 32.6 11.75 1 1100 39.5 26.9 2 1575 45.5 33.2 11.75 1 1085 39.0 25.7 2 1550 45.5 33.2 11.75 1 1090 39.0 26.3 2 1550 45.0 32.4 11.75 1 1105 39.5 26.7 2 1575 45.0 32.8 11.75 1 1085 38.5 26.1 2 1550 44.5 32.2 11.75 1 1105 39.0 26.3 2 1575 45.0 32.4 11.75 1 1090 39.0 26.5 2 1550 45.0 32.4 11.75 1 1105 39.5 26.7 2 1575 45.0 32.6 11.75 1 1105 39.5 26.5 2 1575 45.0 32.6 11.75 1 2 1575 45.5 33.2 11.75 1 1085 39.0 25.7 2 1550 45.5 33.2 11.75 1 1090 39.0 26.3 2 1550 45.0 32.4 11.75 1 1105 39.5 26.7 2 1575 45.0 32.8 11.75 1 1085 38.5 26.1 2 1550 44.5 32.2 11.75
COOLING
RATED
CFM
1100 39.5 26.9
NET MBH
TOTAL SENS.
2
1109431-YTG-A-0714
SEER EER
16.50
16.50
16.50
17.50
16.50
16.50
16.25
16.25
16.50
16.75
16.75
16.75
16.50
16.75
16.75
16.25
16.50
16.50
16.75
16.75
16.75
16.50
16.75
16.75
16.25
22.25
22.25
22.25
24.00
22.25
22.25
22.00
22.00
22.25
22.50
22.50
22.50
22.25
22.25
22.50
22.00
22.25
22.25
22.50
22.50
22.50
22.25
22.25
22.50
22.00
Johnson Controls Unitary Products 15
Page 16
1109431-YTG-A-0714
COOLING CAP ACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH04812C
For notes, see Page 23.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
TM8X120C20MP11 21.0 UC60D
TMLX080C16MP11 21.0 FC/MC/PC48C
TMLX080C16MP11 21.0 FC/MC/PC48D
TMLX080C16MP11 21.0 FC/MC/PC60D
TMLX080C16MP11 21.0 FC/MC62D
TMLX080C16MP11 21.0 FC/PC60C
TMLX080C16MP11 21.0 FC64D
TMLX080C16MP11 21.0 UC48C
TMLX080C16MP11 21.0 UC48D
TMLX080C16MP11 21.0 UC60C
TMLX080C16MP11 21.0 UC60D
TMLX100C16MP11 21.0 FC/MC/PC48C
TMLX100C16MP11 21.0 FC/MC/PC48D
TMLX100C16MP11 21.0 FC/MC/PC60D
TMLX100C16MP11 21.0 FC/MC62D
TMLX100C16MP11 21.0 FC/PC60C
TMLX100C16MP11 21.0 FC64D
TMLX100C16MP11 21.0 UC48C
TMLX100C16MP11 21.0 UC48D
TMLX100C16MP11 21.0 UC60C
TMLX100C16MP11 21.0 UC60D
TMLX100C20MP11 21.0 FC/MC/PC48C
TMLX100C20MP11 21.0 FC/MC/PC48D
TMLX100C20MP11 21.0 FC/MC/PC60D
TMLX100C20MP11 21.0 FC/MC62D
WIDTH STAGE
COIL
MODEL
1
1 1105 39.0 26.3 2 1575 45.0 32.4 11.75 1 1030 39.0 25.9 2 1525 44.5 32.0 11.50 1 1045 39.0 25.9 2 1550 45.0 33.0 11.75 1 1045 39.0 25.7 2 1550 45.5 33.0 11.75 1 1040 38.5 26.1 2 1550 45.5 33.0 11.75 1 1020 38.5 25.5 2 1525 44.5 32.0 11.50 1 1045 40.5 27.5 2 1550 46.5 34.8 12.00 1 1030 39.0 25.9 2 1525 45.0 32.0 11.50 1 1045 39.0 25.9 2 1550 45.0 32.0 11.50 1 1020 38.0 25.3 2 1525 44.5 31.8 11.50 1 1045 38.0 25.3 2 1550 44.5 31.8 11.50 1 1030 39.0 25.9 2 1525 44.5 32.0 11.50 1 1045 39.0 25.9 2 1550 45.0 33.0 11.75 1 1045 39.0 25.7 2 1550 45.5 33.0 11.75 1 1040 38.5 26.1 2 1550 45.5 33.0 11.75 1 1020 38.5 25.5 2 1525 44.5 32.0 11.50 1 1045 40.5 27.5 2 1550 46.5 34.8 12.00 1 1030 39.0 25.9 2 1525 45.0 32.0 11.50 1 1045 39.0 25.9 2 1550 45.0 32.0 11.50 1 1020 38.0 25.3 2 1525 44.5 31.8 11.50 1 2 1550 44.5 31.8 11.50 1 1090 39.0 26.5 2 1550 45.0 32.4 11.75 1 1105 39.5 26.7 2 1575 45.0 32.6 11.75 1 1105 39.5 26.5 2 1575 45.0 32.6 11.75 1 1100 39.5 26.9 2 1575 45.5 33.2 11.75
COOLING
RATED
CFM
1045 38.0 25.3
NET MBH
TOTAL SENS.
2
SEER EER
16.50
16.50
16.50
16.50
16.50
16.50
17.50
16.50
16.50
16.25
16.25
16.50
16.50
16.50
16.50
16.50
17.50
16.50
16.50
16.25
16.25
16.50
16.75
16.75
16.75
22.25
22.25
22.25
22.25
22.25
22.25
24.00
22.25
22.25
22.00
22.00
22.25
22.25
22.25
22.25
22.25
24.00
22.25
22.25
22.00
22.00
22.25
22.50
22.50
22.50
16 Johnson Controls Unitary Products
Page 17
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH04812C
For notes, see Page 23.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
TMLX100C20MP11 21.0 FC/PC60C
TMLX100C20MP11 21.0 UC48C
TMLX100C20MP11 21.0 UC48D
TMLX100C20MP11 21.0 UC60C
TMLX100C20MP11 21.0 UC60D
TMLX120C20MP11 21.0 FC/MC/PC48C
TMLX120C20MP11 21.0 FC/MC/PC48D
TMLX120C20MP11 21.0 FC/MC/PC60D
TMLX120C20MP11 21.0 FC/MC62D
TMLX120C20MP11 21.0 FC/PC60C
TMLX120C20MP11 21.0 UC48C
TMLX120C20MP11 21.0 UC48D
TMLX120C20MP11 21.0 UC60C
TMLX120C20MP11 21.0 UC60D
TM9E100C20MP11 21.0 FC/MC/PC48C
TM9E100C20MP11 21.0 FC/MC/PC48D
TM9E100C20MP11 21.0 FC/MC/PC60D
TM9E100C20MP11 21.0 FC/MC62D
TM9E100C20MP11 21.0 FC64D
TM9E100C20MP11 21.0 UC48C
TM9E100C20MP11 21.0 UC48D
TM9E100C20MP11 21.0 UC60D
TM9E120D20MP11 24.5 FC/MC/PC48D
TM9E120D20MP11 24.5 FC/MC/PC60D
TM9E120D20MP11 24.5 FC/MC62D
WIDTH STAGE
COIL
MODEL
1
1 1085 39.0 25.7 2 1550 45.5 33.2 11.75 1 1090 39.0 26.3 2 1550 45.0 32.4 11.75 1 1105 39.5 26.7 2 1575 45.0 32.8 11.75 1 1085 38.5 26.1 2 1550 44.5 32.2 11.75 1 1105 39.0 26.3 2 1575 45.0 32.4 11.75 1 1090 39.0 26.5 2 1550 45.0 32.4 11.75 1 1105 39.5 26.7 2 1575 45.0 32.6 11.75 1 1105 39.5 26.5 2 1575 45.0 32.6 11.75 1 1100 39.5 26.9 2 1575 45.5 33.2 11.75 1 1085 39.0 25.7 2 1550 45.5 33.2 11.75 1 1090 39.0 26.3 2 1550 45.0 32.4 11.75 1 1105 39.5 26.7 2 1575 45.0 32.8 11.75 1 1085 38.5 26.1 2 1550 44.5 32.2 11.75 1 1105 39.0 26.3 2 1575 45.0 32.4 11.75 1 945 38.0 24.9 2 1500 44.5 31.6 11.50 1 960 38.5 24.9 2 1525 44.5 32.0 11.50 1 960 38.0 24.9 2 1525 44.5 32.0 11.50 1 985 38.0 25.3 2 1550 45.5 33.0 11.75 1 980 39.5 26.3 2 1550 46.0 33.8 12.00 1 945 38.0 24.9 2 1500 44.5 31.8 11.50 1 2 1525 45.0 32.0 11.50 1 960 38.0 24.7 2 1525 44.5 31.8 11.50 1 965 38.5 25.1 2 1525 44.5 32.0 11.50 1 980 38.5 25.1 2 1550 45.0 32.2 11.75 1 980 38.0 25.3 2 1550 45.5 33.0 11.75
COOLING
RATED
CFM
960 38.5 25.1
NET MBH
TOTAL SENS.
2
1109431-YTG-A-0714
SEER EER
16.50
16.75
16.75
16.25
16.50
16.50
16.75
16.75
16.75
16.50
16.75
16.75
16.25
16.50
16.25
16.50
16.50
16.50
17.25
16.50
16.50
16.25
16.50
16.50
16.50
22.25
22.25
22.50
22.00
22.25
22.25
22.50
22.50
22.50
22.25
22.25
22.50
22.00
22.25
22.00
22.25
22.25
22.25
23.25
22.00
22.00
21.75
22.25
22.50
22.25
Johnson Controls Unitary Products 17
Page 18
1109431-YTG-A-0714
COOLING CAP ACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH04812C
For notes, see Page 23.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
TM9E120D20MP11 24.5 FC64D
TM9E120D20MP11 24.5 UC48D
TM9E120D20MP11 24.5 UC60D
TM9X100C20MP11 21.0 FC/MC/PC48C
TM9X100C20MP11 21.0 FC/MC/PC48D
TM9X100C20MP11 21.0 FC/MC/PC60D
TM9X100C20MP11 21.0 FC/MC62D
TM9X100C20MP11 21.0 FC64D
TM9X100C20MP11 21.0 UC48C
TM9X100C20MP11 21.0 UC48D
TM9X100C20MP11 21.0 UC60D
TM9X120D20MP11 24.5 FC/MC/PC48D
TM9X120D20MP11 24.5 FC/MC/PC60D
TM9X120D20MP11 24.5 FC/MC62D
TM9X120D20MP11 24.5 FC64D
TM9X120D20MP11 24.5 UC48D
TM9X120D20MP11 24.5 UC60D
Y*LC*C16 21.0 FC/MC/PC48C
Y*LC*C16 21.0 FC/MC/PC48D
Y*LC*C16 21.0 FC/MC/PC60D
Y*LC*C16 21.0 FC/MC62D
Y*LC*C16 21.0 FC/PC60C
Y*LC*C16 21.0 FC64D
Y*LC*C16 21.0 UC48C
Y*LC*C16 21.0 UC60C
WIDTH STAGE
COIL
MODEL
1
1 960 39.5 26.1 2 1525 46.0 33.8 12.00 1 965 38.5 25.1 2 1525 45.0 32.2 11.75 1 980 38.0 25.3 2 1550 44.5 31.8 11.75 1 945 38.0 24.9 2 1500 44.5 31.6 11.50 1 960 38.5 24.9 2 1525 44.5 32.0 11.50 1 960 38.0 24.9 2 1525 44.5 32.0 11.50 1 985 38.0 25.3 2 1550 45.5 33.0 11.75 1 980 39.5 26.3 2 1550 46.0 33.8 12.00 1 945 38.0 24.9 2 1500 44.5 31.8 11.50 1 960 38.5 25.1 2 1525 45.0 32.0 11.50 1 960 38.0 24.7 2 1525 44.5 31.8 11.50 1 965 38.5 25.1 2 1525 44.5 32.0 11.50 1 980 38.5 25.1 2 1550 45.0 32.2 11.75 1 980 38.0 25.3 2 1550 45.5 33.0 11.75 1 960 39.5 26.1 2 1525 46.0 33.8 12.00 1 965 38.5 25.1 2 1525 45.0 32.2 11.75 1 980 38.0 25.3 2 1550 44.5 31.8 11.75 1 1120 39.5 26.7 2 1565 44.5 32.2 11.25 1 1120 39.5 26.7 2 1565 44.5 32.2 11.25 1 1025 39.0 25.7 2 1600 45.0 33.0 11.50 1 2 1635 45.5 34.0 11.75 1 1025 39.0 25.7 2 1600 45.0 33.0 11.50 1 1025 40.5 27.5 2 1635 46.5 35.0 12.00 1 1035 39.0 25.7 2 1615 45.0 33.0 11.50 1 1035 38.5 25.5 2 1625 45.0 32.8 11.75
COOLING
RATED
CFM
1025 38.5 25.7
NET MBH
TOTAL SENS.
2
SEER EER
17.00
16.50
16.25
16.25
16.50
16.50
16.50
17.25
16.50
16.50
16.25
16.50
16.50
16.50
17.00
16.50
16.25
16.25
16.25
16.50
16.25
16.50
17.50
16.25
16.25
23.25
22.25
22.00
22.00
22.25
22.25
22.25
23.25
22.00
22.00
21.75
22.25
22.50
22.25
23.25
22.25
22.00
21.75
21.75
22.25
21.75
22.25
24.00
21.75
21.75
18 Johnson Controls Unitary Products
Page 19
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH04812C
For notes, see Page 23.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
Y*LC*C20 21.0 FC/MC/PC48C
Y*LC*C20 21.0 FC/MC/PC48D
Y*LC*C20 21.0 FC/MC/PC60D
Y*LC*C20 21.0 FC/MC62D
Y*LC*C20 21.0 FC/PC60C
Y*LC*C20 21.0 FC64D
Y*LC*C20 21.0 UC48C
Y*LC*C20 21.0 UC60C
Y*9C*C16 21.0 FC/MC/PC48C
Y*9C*C16 21.0 FC/MC/PC48D
Y*9C*C16 21.0 FC/MC/PC60D
Y*9C*C16 21.0 FC/MC62D
Y*9C*C16 21.0 FC/PC60C
Y*9C*C16 21.0 FC64D
Y*9C*C16 21.0 UC48C
Y*9C*C16 21.0 UC60C
Y*9C*C20 21.0 FC/MC/PC48C
Y*9C*C20 21.0 FC/MC/PC48D
Y*9C*C20 21.0 FC/MC/PC60D
Y*9C*C20 21.0 FC/MC62D
Y*9C*C20 21.0 FC/PC60C
Y*9C*C20 21.0 FC64D
Y*9C*C20 21.0 UC48C
Y*9C*C20 21.0 UC60C
Y*9C*D20 24.5 FC/MC/PC48D
WIDTH STAGE
COIL
MODEL
1
1 1080 39.0 25.9 2 1640 45.0 33.0 11.50 1 1080 39.0 25.9 2 1640 45.0 33.0 11.50 1 1060 39.0 25.7 2 1625 45.5 33.0 11.75 1 1060 39.0 26.3 2 1620 45.5 33.8 12.00 1 1060 39.0 25.7 2 1625 45.5 33.0 11.75 1 1060 40.5 27.5 2 1630 47.0 35.0 12.25 1 1080 39.0 26.1 2 1640 45.5 33.2 11.50 1 1015 38.0 25.3 2 1605 45.0 32.8 12.00 1 1050 39.0 25.9 2 1590 45.0 33.0 11.50 1 1050 39.0 25.9 2 1590 45.0 33.0 11.50 1 1050 39.0 25.7 2 1590 45.0 33.0 11.50 1 1040 38.5 26.1 2 1590 45.5 33.4 11.75 1 1050 39.0 25.7 2 1590 45.0 33.0 11.50 1 1040 40.5 27.5 2 1590 46.5 34.8 12.00 1 1050 39.0 25.9 2 1590 44.5 32.0 11.50 1 1050 38.0 25.3 2 1590 44.5 31.6 11.50 1 1055 39.0 25.9 2 1655 45.0 33.0 11.50 1 1055 39.0 25.9 2 1655 45.0 33.0 11.50 1 1055 39.0 25.7 2 1655 45.0 33.0 11.50 1 1040 38.5 25.9 2 1655 45.5 33.8 11.50 1 2 1655 45.0 33.0 11.50 1 1040 40.5 27.5 2 1655 46.5 34.8 11.75 1 1055 39.0 25.9 2 1655 45.5 33.2 11.50 1 1055 38.5 25.7 2 1655 45.0 33.0 11.50 1 1060 39.0 25.9 2 1645 45.0 33.0 11.50
COOLING
RATED
CFM
1055 39.0 25.7
NET MBH
TOTAL SENS.
2
1109431-YTG-A-0714
SEER EER
16.50
16.50
16.50
16.25
16.50
17.50
16.25
16.25
16.50
16.50
16.50
16.25
16.50
17.50
16.50
16.25
16.50
16.50
16.50
16.25
16.50
17.50
16.25
16.00
16.50
22.25
22.25
22.25
22.00
22.25
24.00
21.75
21.75
22.25
22.25
22.25
21.75
22.25
24.00
22.25
22.00
22.25
22.25
22.25
21.75
22.25
24.00
21.75
21.50
22.25
Johnson Controls Unitary Products 19
Page 20
1109431-YTG-A-0714
COOLING CAP ACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH04812C
YZH06012C
For notes, see Page 23.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
Y*9C*D20 24.5 FC/MC/PC60D
Y*9C*D20 24.5 FC/MC62D
Y*9C*D20 24.5 FC64D
Y*9C*D20 24.5 UC48D
Y*9C*D20 24.5 UC60D
T*(8,L)V*C16 21.0 FC/PC60C
T*(8,L)V*C20 21.0 FC/MC/PC60D
T*(8,L)V*C20 21.0 FC/MC62D
T*(8,L)V*C20 21.0 FC/PC60C
T*(8,L)V*C20 21.0 FC64D
T*(8,L)V*C20 21.0 UC60C
T*9V*C20 21.0 FC/MC/PC60D
T*9V*C20 21.0 FC/MC62D
T*9V*C20 21.0 FC/PC60C
T*9V*C20 21.0 FC64D
T*9V*C20 21.0 UC60C
T*9V*D20 24.5 FC/MC/PC60D
T*9V*D20 24.5 FC/MC62D
T*9V*D20 24.5 FC64D
T*9V*D20 24.5 UC60D
TM8X080C
TM8X080C16MP11 21.0 FC/MC62D
TM8X080C16MP11 21.0 FC/PC60C
TM8X080C16MP11 21.0 FC64D
TM8X080C16MP11 21.0 UC60C
16MP11 21.0 FC/MC/PC60D
WIDTH STAGE
COIL
MODEL
1
1 1070 39.0 25.7 2 1615 45.0 33.0 11.75 1 1085 39.0 26.5 2 1630 45.5 33.8 11.75 1 1085 40.5 27.5 2 1630 46.5 34.8 12.00 1 1060 39.0 25.9 2 1645 45.5 33.2 11.50 1 1070 38.5 25.7 2 1615 45.0 32.6 11.50 1 1025 45.5 27.7 2 1600 55.0 36.6 11.25 1 1060 46.0 28.1 2 1600 55.0 36.8 11.50 1 1015 45.0 27.7 2 1600 55.5 37.6 11.50 1 1060 46.0 28.1 2 1600 55.0 36.8 11.50 1 1060 47.5 29.5 2 1855 58.0 41.0 11.50 1 1015 44.5 27.3 2 1605 55.0 36.8 11.50 1 1055 45.5 28.1 2 1655 55.5 37.2 11.50 1 1040 45.5 28.1 2 1655 56.0 38.0 11.50 1 1055 45.5 28.1 2 1655 55.5 37.2 11.50 1 1040 47.0 29.1 2 1655 57.0 39.0 11.50 1 1055 45.0 27.7 2 1655 55.0 37.0 11.25 1 1070 46.0 28.3 2 1615 55.0 36.8 11.25 1 1085 45.5 28.7 2 1630 55.5 38.0 11.50 1 1085 47.5 29.7 2 1630 57.0 39.0 11.75 1 1070 45.0 27.9 2 1615 55.0 36.8 11.25 1 1045 46.0 28.1 2 1550 55.0 36.2 11.25 1 1040 45.5 28.1 2 1550 55.0 37.2 11.50 1 1020 45.5 27.7 2 1525 54.5 35.8 11.25 1 1045 47.5 29.3 2 1550 56.5 38.0 11.75 1 1020 45.0 27.5 2 1525 54.0 35.8 11.25
RATED
CFM
COOLING NET MBH
TOTAL SENS.
2
SEER EER
16.50
16.25
17.50
16.25
16.00
14.50
14.75
14.50
14.75
15.25
14.50
14.75
14.75
14.75
15.00
14.50
14.75
14.75
15.25
14.50
15.00
15.00
14.75
15.50
14.75
22.25
21.75
24.00
21.75
21.50
20.25
20.50
20.00
20.50
21.25
20.25
20.25
20.25
20.25
21.00
20.00
20.25
20.25
21.25
20.00
20.75
20.75
20.50
21.75
20.25
20 Johnson Controls Unitary Products
Page 21
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH06012C
For notes, see Page 23.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
TM8X080C16MP11 21.0 UC60D
TM8X100C16MP11 21.0 FC/MC/PC60D
TM8X100C16MP11 21.0 FC/MC62D
TM8X100C16MP11 21.0 FC/PC60C
TM8X100C16MP11 21.0 FC64D
TM8X100C16MP11 21.0 UC60C
TM8X100C16MP11 21.0 UC60D
TM8X100C20MP11 21.0 FC/MC/PC60D
TM8X100C20MP11 21.0 FC/MC62D
TM8X100C20MP11 21.0 FC/PC60C
TM8X100C20MP11 21.0 UC60C
TM8X100C20MP11 21.0 UC60D
TM8X120C20MP11 21.0 FC/MC/PC60D
TM8X120C20MP11 21.0 FC/MC62D
TM8X120C20MP11 21.0 FC/PC60C
TM8X120C20MP11 21.0 UC60C
TM8X120C20MP11 21.0 UC60D
TMLX080C16MP11 21.0 FC/MC/PC60D
TMLX080C16MP11 21.0 FC/MC62D
TMLX080C16MP11 21.0 FC/PC60C
TMLX080C16MP11 21.0 FC64D
TMLX080C16MP11 21.0 UC60C
TMLX080C16MP11 21.0 UC60D
TMLX100C16MP11 21.0 FC/MC/PC60D
TMLX100C16MP11 21.0 FC/MC62D
WIDTH STAGE
COIL
MODEL
1
1 1045 45.0 27.5 2 1550 54.0 35.8 11.25 1 1045 46.0 28.1 2 1550 55.0 36.2 11.25 1 1040 45.5 28.1 2 1550 55.0 37.2 11.50 1 1020 45.5 27.7 2 1525 54.5 35.8 11.25 1 1045 47.5 29.3 2 1550 56.5 38.0 11.75 1 1020 45.0 27.5 2 1525 54.0 35.8 11.25 1 1045 45.0 27.5 2 1550 54.0 35.8 11.25 1 1105 46.5 28.7 2 1575 55.0 36.6 11.50 1 1100 46.0 28.9 2 1575 55.5 37.6 11.50 1 1085 46.0 28.5 2 1550 55.0 36.4 11.50 1 1085 45.5 28.1 2 1550 54.5 36.2 11.25 1 1105 45.5 28.3 2 1575 54.5 36.4 11.50 1 1105 46.5 28.7 2 1575 55.0 36.6 11.50 1 1100 46.0 28.9 2 1575 55.5 37.6 11.50 1 1085 46.0 28.5 2 1550 55.0 36.4 11.50 1 1085 45.5 28.1 2 1550 54.5 36.2 11.25 1 1105 45.5 28.3 2 1575 54.5 36.4 11.50 1 1045 46.0 28.1 2 1550 55.0 36.2 11.25 1 1040 45.5 28.1 2 1550 55.0 37.2 11.50 1 1020 45.5 27.7 2 1525 54.5 35.8 11.25 1 2 1550 56.5 38.0 11.75 1 1020 45.0 27.5 2 1525 54.0 35.8 11.25 1 1045 45.0 27.5 2 1550 54.0 35.8 11.25 1 1045 46.0 28.1 2 1550 55.0 36.2 11.25 1 1040 45.5 28.1 2 1550 55.0 37.2 11.50
COOLING
RATED
CFM
1045 47.5 29.3
NET MBH
TOTAL SENS.
2
1109431-YTG-A-0714
SEER EER
14.75
15.00
15.00
14.75
15.50
14.75
14.75
15.00
15.00
15.00
14.75
14.75
15.00
15.00
15.00
14.75
14.75
15.00
15.00
14.75
15.50
14.75
14.75
15.00
15.00
20.25
20.75
20.75
20.50
21.75
20.25
20.25
21.00
20.75
20.75
20.25
20.50
21.00
20.75
20.75
20.25
20.50
20.75
20.75
20.50
21.75
20.25
20.25
20.75
20.75
Johnson Controls Unitary Products 21
Page 22
1109431-YTG-A-0714
COOLING CAP ACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH06012C
For notes, see Page 23.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
TMLX100C16MP11 21.0 FC/PC60C
TMLX100C16MP11 21.0 FC64D
TMLX100C16MP11 21.0 UC60C
TMLX100C16MP11 21.0 UC60D
TMLX100C20MP11 21.0 FC/MC/PC60D
TMLX100C20MP11 21.0 FC/MC62D
TMLX100C20MP11 21.0 FC/PC60C
TMLX100C20MP11 21.0 UC60C
TMLX100C20MP11 21.0 UC60D
TMLX120C20MP11 21.0 FC/MC/PC60D
TMLX120C20MP11 21.0 FC/MC62D
TMLX120C20MP11 21.0 FC/PC60C
TMLX120C20MP11 21.0 UC60C
TMLX120C20MP11 21.0 UC60D
TM9E100C20MP11 21.0 FC/MC/PC60D
TM9E100C20MP11 21.0 FC/MC62D
TM9E100C20MP11 21.0 FC64D
TM9E100C20MP11 21.0 UC60D
TM9E120D20MP11 24.5 FC/MC/PC60D
TM9E120D20MP11 24.5 FC/MC62D
TM9E120D20MP11 24.5 FC64D
TM9E120D20MP11 24.5 UC60D
TM9X100C20MP11 21.0 FC/MC/PC60D
TM9X100C20MP11 21.0 FC/MC62D
TM9X100C20MP11 21.0 FC64D
WIDTH STAGE
COIL
MODEL
1
1 1020 45.5 27.7 2 1525 54.5 35.8 11.25 1 1045 47.5 29.3 2 1550 56.5 38.0 11.75 1 1020 45.0 27.5 2 1525 54.0 35.8 11.25 1 1045 45.0 27.5 2 1550 54.0 35.8 11.25 1 1105 46.5 28.7 2 1575 55.0 36.6 11.50 1 1100 46.0 28.9 2 1575 55.5 37.6 11.50 1 1085 46.0 28.5 2 1550 55.0 36.4 11.50 1 1085 45.5 28.1 2 1550 54.5 36.2 11.25 1 1105 45.5 28.3 2 1575 54.5 36.4 11.50 1 1105 46.5 28.7 2 1575 55.0 36.6 11.50 1 1100 46.0 28.9 2 1575 55.5 37.6 11.50 1 1085 46.0 28.5 2 1550 55.0 36.4 11.50 1 1085 45.5 28.1 2 1550 54.5 36.2 11.25 1 1105 45.5 28.3 2 1575 54.5 36.4 11.50 1 960 45.0 27.1 2 1525 54.5 35.8 11.25 1 985 45.0 27.5 2 1550 55.0 37.2 11.50 1 980 46.5 28.5 2 1550 56.5 38.0 11.75 1 960 44.0 26.7 2 1525 54.0 35.8 11.25 1 980 45.0 27.5 2 1550 55.0 36.2 11.50 1 980 45.0 27.5 2 1550 55.5 37.2 11.50 1 2 1525 56.5 37.8 11.75 1 980 45.0 27.5 2 1550 54.5 35.8 11.25 1 960 45.0 27.1 2 1525 54.5 35.8 11.25 1 985 45.0 27.5 2 1550 55.0 37.2 11.50 1 980 46.5 28.5 2 1550 56.5 38.0 11.75
COOLING
RATED
CFM
960 46.5 28.3
NET MBH
TOTAL SENS.
2
SEER EER
14.75
15.50
14.75
14.75
15.00
15.00
15.00
14.75
14.75
15.00
15.00
15.00
14.75
14.75
14.75
14.75
15.25
14.50
14.75
14.75
15.25
14.75
14.75
14.75
15.25
20.50
21.75
20.25
20.25
21.00
20.75
20.75
20.25
20.50
21.00
20.75
20.75
20.25
20.50
20.50
20.50
21.50
20.00
20.75
20.50
21.25
20.25
20.50
20.50
21.50
22 Johnson Controls Unitary Products
Page 23
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
MODEL
FURNACE
WIDTH STAGE
UNIT
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
TM9X100C20MP11 21.0 UC60D
TM9X120D20MP11 24.5 FC/MC/PC60D
TM9X120D20MP11 24.5 FC/MC62D
TM9X120D20MP11 24.5 FC64D
TM9X120D20MP11 24.5 UC60D
Y*LC*C16 21.0 FC/PC60C
Y*LC*C20 21.0 FC/MC/PC60D
Y*LC*C20 21.0 FC/MC62D
Y*LC*C20 21.0 FC/PC60C
Y*LC*C20 21.0 FC64D
YZH06012C
Y*LC*C20 21.0 UC60C
Y*9C*C20 21.0 FC/MC/PC60D
Y*9C*C20 21.0 FC/MC62D
Y*9C*C20 21.0 FC/PC60C
Y*9C*C20 21.0 FC64D
Y*9C*C20 21.0 UC60C
Y*9C*D20 24.5 FC/MC/PC60D
Y*9C*D20 24.5 FC/MC62D
Y*9C*D20 24.5 FC64D
Y*9C*D20 24.5 UC60D
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.
2. High Efficiency Motor Furnaces have B.O.D (Blower on Delay) standard. PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings.
COIL
MODEL
1
1 960 44.0 26.7 2 1525 54.0 35.8 11.25 1 980 45.0 27.5 2 1550 55.0 36.2 11.50 1 980 45.0 27.5 2 1550 55.5 37.2 11.50 1 960 46.5 28.3 2 1525 56.5 37.8 11.75 1 980 45.0 27.5 2 1550 54.5 35.8 11.25 1 1025 45.5 27.7 2 1600 55.0 36.6 11.25 1 1060 46.0 28.1 2 1600 55.0 36.8 11.50 1 1015 45.0 27.7 2 1600 55.5 37.6 11.50 1 1060 46.0 28.1 2 1600 55.0 36.8 11.50 1 1060 47.5 29.5 2 1855 58.0 41.0 11.50 1 1015 44.5 27.3 2 1605 55.0 36.8 11.50 1 1055 45.5 28.1 2 1655 55.5 37.2 11.50 1 1040 45.5 28.1 2 1655 56.0 38.0 11.50 1 1055 45.5 28.1 2 1655 55.5 37.2 11.50 1 1040 47.0 29.1 2 1655 57.0 39.0 11.50 1 1055 45.0 27.7 2 1655 55.0 37.0 11.25 1 1070 46.0 28.3 2 1615 55.0 36.8 11.25 1 1085 45.5 28.7 2 1630 55.5 38.0 11.50 1 1085 47.5 29.7 2 1630 57.0 39.0 11.75 1 1070 45.0 27.9 2 1615 55.0 36.8 11.25
RATED
CFM
COOLING NET MBH
TOTAL SENS.
2
1109431-YTG-A-0714
SEER EER
14.50
14.75
14.75
15.25
14.75
14.50
14.75
14.50
14.75
15.25
14.50
14.75
14.75
14.75
15.00
14.50
14.75
14.75
15.25
14.50
20.00
20.75
20.50
21.25
20.25
20.25
20.50
20.00
20.50
21.25
20.25
20.25
20.25
20.25
21.00
20.00
20.25
20.25
21.25
20.00
Johnson Controls Unitary Products 23
Page 24
1109431-YTG-A-0714
HEATING CAPACITY - With Air Handler
UNIT
MODEL
YZH02412C
YZH03612C
For notes, see Page 26.
AIR HANDLER
MODEL
AHV24B –
AHV30B –
AHV36C –
MV12B FC/MC43B
MV12D FC/MC48D
MV12D FC/MC60D
AHE42D –
AHV36C –
AHV42D –
AHV48D –
MV12B FC/MC43B
MV12D FC/MC48D
MV12D FC/MC60D
MV12D FC/MC62D
MV12D FC64D
MV16C FC/MC43C
MV16C FC/MC48C
MV20D FC/MC48D
COIL
MODEL
1
STAGE
18 SEER HP WITH AIR HANDLERS
1 470 18.3 – – 3.14 2 710 23.4 16.9 9.40 3.52
2* 470 24.2 15.1 8.70 2.86
1 500 18.8 – – 3.20 2 775 23.8 17.0 9.45 3.62
2* 500 24.6 15.2 8.70 2.94
1 485 18.9 – – 3.24 2 760 23.8 16.9 9.65 3.74
2* 485 25.2 15.1 8.85 2.98
1 620 19.2 – – 3.48 2 800 24.0 16.9 9.60 3.78
2* 620 25.4 15.2 9.35 3.28
1 595 19.0 – – 3.50 2 905 24.0 16.8 9.80 4.00
2* 595 25.0 15.0 9.60 3.30
1 645 19.2 – – 3.62 2 835 23.8 16.6 9.90 3.92
2* 645 25.4 14.9 9.80 3.42
1 685 25.5 – – 3.28 2 1180 35.6 24.4 9.95 4.08
2* 685 35.4 23.8 9.95 2.92
1 785 25.3 – – 3.46 2 1215 36.0 24.8 9.65 3.98
2* 785 35.8 23.6 8.90 3.10
1 790 25.7 – – 3.52 2 1180 35.8 24.4 9.90 4.06
2* 790 34.4 23.6 9.75 3.22
1 835 25.9 – – 3.60 2 1155 35.4 24.2 9.95 4.04
2* 835 35.6 23.2 9.30 3.24
1 805 25.9 – – 3.46 2 1225 36.0 24.8 9.70 4.00
2* 805 36.0 23.8 8.95 3.10
1 785 25.7 – – 3.50 2 1160 35.6 24.4 10.05 4.08
2* 785 35.8 23.6 9.20 3.14
1 735 25.7 – – 3.40 2 1135 35.6 24.2 9.75 3.96
2* 735 35.6 23.4 8.90 2.98
1 770 25.5 – – 3.50 2 1235 36.0 24.0 10.00 4.20
2* 770 35.0 23.0 9.80 3.24
1 780 26.3 – – 3.68 2 1155 36.0 24.2 10.20 4.28
2* 780 36.4 23.4 9.35 3.32
1 775 25.3 – – 3.38 2 1200 35.8 24.6 9.80 4.02
2* 775 35.4 23.8 9.40 3.08
1 775 25.7 – – 3.44 2 1200 35.6 24.6 9.85 4.02
2* 775 36.0 23.6 9.70 3.12
1 860 26.3 – – 3.60 2 1300 36.0 24.8 9.95 4.20
2* 860 36.4 24.0 9.20 3.28
RATED
CFM
HEATING
NET MBH
47°F OD 17°F OD
2
HSPF COP @ 47°F
24 Johnson Controls Unitary Products
Page 25
HEATING CAPACITY - With Air Handler (Continued)
UNIT
MODEL
YZH03612C
YZH04812C
For notes, see Page 26.
AIR HANDLER
MODEL
MV20D FC/MC60D
MV20D FC/MC62D
MV20D FC64D
MX12BN21 FC/MC43B
MX12DN21 FC/MC48D
MX12DN21 FC/MC60D
MX12DN21 FC64D
AHE60D –
AHV48D –
AHV60D –
MV16C FC/MC48C
MV16C FC60C
MV20D FC/MC48D
MV20D FC/MC60D
MV20D FC/MC62D
MV20D FC64D
MX16CN21 FC/MC48C
MX16CN21 FC60C
COIL
MODEL
1
STAGE
18 SEER HP WITH AIR HANDLERS
1109431-YTG-A-0714
HEATING
RATED
CFM
1 860 26.3 – – 3.60 2 1300 36.0 24.4 9.90 4.14
2* 860 36.0 23.6 9.85 3.26
1 860 25.9 – – 3.62 2 1300 36.0 24.0 10.00 4.24
2* 860 36.0 23.0 9.85 3.36
1 860 26.7 – – 3.78 2 1300 36.5 24.4 10.10 4.38
2* 860 36.6 23.4 10.05 3.48
1 740 25.3 – – 3.44 2 1125 35.6 24.8 9.60 3.88
2* 740 35.0 23.6 9.00 3.10
1 830 25.5 – – 3.56 2 1125 35.4 24.2 10.00 4.04
2* 830 35.6 23.4 9.95 3.26
1 845 25.9 – – 3.60 2 1150 35.4 24.0 10.00 4.04
2* 845 35.6 23.4 9.90 3.26
1 880 26.7 – – 3.84 2 1175 36.0 24.2 10.20 4.30
2* 880 36.4 23.2 10.20 3.54
1 1160 34.2 – – 3.54 2 1565 47.5 31.8 10.00 3.94
2* 1160 46.5 29.2 9.35 3.36
1 1010 34.0 – – 3.34 2 1585 47.5 32.2 9.80 3.76
2* 1010 45.5 29.2 9.00 3.10
1 1000 33.8 – – 3.40 2 1570 48.0 32.0 9.85 3.86
2* 1000 46.0 29.0 9.10 3.18
1 1035 34.0 – – 3.36 2 1625 48.0 32.4 9.85 3.84
2* 1035 46.0 29.6 9.35 3.14
1 1035 34.2 – – 3.32 2 1625 48.0 32.4 9.80 3.78
2* 1035 46.0 29.6 9.35 3.10
1 1025 33.8 – – 3.36 2 1620 48.0 32.4 9.95 3.88
2* 1025 46.0 29.6 9.45 3.14
1 1020 34.2 – – 3.28 2 1600 48.0 32.4 9.80 3.78
2* 1020 46.0 29.6 9.10 3.06
1 1085 34.0 – – 3.50 2 1645 48.0 31.8 10.00 3.98
2* 1085 46.0 29.0 9.60 3.30
1 1075 34.4 – – 3.62 2 1630 48.5 32.2 10.05 4.06
2* 1075 46.5 29.6 9.30 3.38
1 1015 33.8 – – 3.40 2 1600 48.0 32.6 9.80 3.82
2* 1015 46.0 29.4 9.05 3.18
1 1020 34.0 – – 3.38 2 1600 48.0 32.4 9.75 3.76
2* 1020 46.0 29.4 9.05 3.12
NET MBH
47°F OD 17°F OD
2
HSPF COP @ 47°F
Johnson Controls Unitary Products 25
Page 26
1109431-YTG-A-0714
HEATING CAPACITY - With Air Handler (Continued)
UNIT
MODEL
AIR HANDLER
MODEL
COIL
MODEL
1
STAGE
RATED
CFM
HEATING
NET MBH
47°F OD 17°F OD
18 SEER HP WITH AIR HANDLERS
1 1160 41.0 – – 3.18
AHE60D –
2 1835 58.0 38.0 9.35 3.78
2* 1160 59.0 37.2 9.00 2.96
1 1090 40.5 – – 3.14
AHV60D –
2 1635 57.5 38.0 9.30 3.64
2* 1090 58.5 37.0 9.15 2.90
1 1160 41.0 – – 3.10
YZH06012C
MV20D FC/MC60D
2 1845 57.5 38.5 9.30 3.66
2* 1160 58.5 37.6 8.95 2.86
1 1185 41.0 – – 3.24
MV20D FC/MC62D
2 1845 58.0 38.0 9.40 3.80
2* 1185 59.0 37.0 9.20 3.00
1 1160 41.5 – – 3.30
MV20D FC64D
2 1855 58.5 38.5 9.35 3.86
2* 1160 59.5 37.6 9.25 3.06
1. Rated CFM same as for cooling.
2. Heating MBH based on AHRI standards of 70°F DB (Dry Bulb) entering indoor air, 72% RH (Relative Humidity) outdoor air with 25 feet of interconnecting pip­ing and no supplemental electric heat operation.
* Notates “Hot Heat Pump” performance. These ratings are not AHRI listed. COP equals MBH output divided by (total KW input x 3.412).
HSPF (Heating Seasonal Performance Factor) is the t otal he ating output during a normal annual usage period fo r heating divided by th e tota l electric power input during the same period.
— = Not Applicable. MA Modular Air Handlers use Coil Only Ratings.
2
HSPF COP @ 47°F
HEATING CAPACITY - Upflow, Downflow, and Horizontal Furnaces and Coils (Coil Only Ratings)
UNIT
MODEL
COIL
MODEL
1
STAGE
RATED
CFM
HEATING
NET MBH
47°F OD 17°F OD
18 SEER HP COIL ONLY RATINGS
1 600 19.70 – – 3.24
YZH02412C FC/MC/PC48
2 800 24.60 17.50 8.5 3.54
2* 600 25.80 15.50 8.0 3.12
1 900 26.50 – – 3.38
YZH03612C FC/MC62
2 1200 36.50 24.60 9.2 3.88
2* 900 36.60 23.50 7.9 3.24
1 1200 35.20 – – 3.32
YZH04812C FC/MC62
2 1600 48.50 32.60 9.6 3.76
2* 1200 47.30 30.10 8.0 3.24
1 1350 42.50 – – 3.14
YZH06012C FC/MC62
2 1800 58.50 38.50 9.2 3.66
2* 1350 60.50 38.00 7.7 3.02
1. Rated CFM same as for cooling.
2. Heating MBH based on AHRI standards of 70°F DB (Dry Bulb) entering indoor air, 72% RH (Relative Humidity) outdoor air with 25 feet of interconnecting pip­ing and no supplemental electric heat operation.
* Notates “Hot Heat Pump” performance. These ratings are not AHRI listed. COP equals MBH output divided by (total KW input x 3.412).
HSPF (Heating Seasonal Performance Factor) is the t otal he ating output during a normal annual usage period fo r heating divided by th e tota l electric power input during the same period.
MA Modular Air Handlers use Coil Only Ratings. PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings. — = Not Applicable.
2
HSPF COP @ 47°F
26 Johnson Controls Unitary Products
Page 27
HEATING CAPACITY - With High Efficiency Motor Furnaces
UNIT
MODEL
YZH02412C
For notes, see Page 52.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
T*(8,L)V*A12 FC/MC/PC37A
T*(8,L)V*B12 FC/MC/PC43B
T*(8,L)V*C16 FC/MC/PC43C
T*9V*A10 FC/MC/PC37A
T*9V*B12 FC/MC/PC43B
T*9V*C16 FC/MC/PC48C
T*9V*C16 FC/PC60C
T*9V*C16 UC48C
T*9V*C16 UC60C
T*9V*C20 FC/MC/PC43C
T*9V*C20 FC/MC/PC48C
T*9V*C20 UC48C
TM8X080C16MP11 FC/MC/PC43C
TM8X080C16MP11 FC/MC/PC48C
TM8X080C16MP11 FC/PC60C
TM8X080C16MP11 UC48C
TM8X080C16MP11 UC60C
COIL
MODEL
1
STAGE
1 585 19.2 – – 3.42 2 765 23.8 17.0 9.50 3.70
2* 585 25.4 15.2 9.00 3.22
1 515 19.2 – – 3.24 2 790 23.8 16.9 9.60 3.76
2* 515 24.8 15.3 9.20 3.02
1 645 19.3 – – 3.54 2 770 23.8 16.9 9.70 3.76
2* 645 25.6 15.2 9.50 3.36
1 570 19.2 – – 3.34 2 790 24.2 17.2 9.00 3.62
2* 570 25.4 15.3 8.55 3.16
1 550 19.0 – – 3.36 2 800 24.0 17.0 9.45 3.76
2* 550 25.2 15.2 8.85 3.16
1 635 19.1 – – 3.58 2 890 24.2 16.9 9.55 3.92
2* 635 25.4 15.0 9.05 3.40
1 635 19.2 – – 3.60 2 890 24.2 16.8 9.65 3.92
2* 635 25.4 15.0 9.15 3.38
1 635 19.5 – – 3.76 2 890 24.2 16.8 9.65 4.04
2* 635 25.8 15.0 9.25 3.58
1 635 19.2 – – 3.60 2 890 24.2 16.8 9.65 3.92
2* 635 25.4 15.0 9.15 3.38
1 630 19.2 – – 3.54 2 890 24.2 16.9 9.60 3.90
2* 630 25.2 15.1 9.05 3.34
1 630 19.1 – – 3.58 2 890 24.2 16.9 9.55 3.92
2* 630 25.4 15.0 9.05 3.38
1 630 19.5 – – 3.76 2 890 24.2 16.8 9.65 4.04
2* 630 25.8 15.0 9.25 3.58
1 630 19.3 – – 3.50 2 800 24.2 17.2 9.10 3.66
2* 630 25.4 15.2 8.80 3.30
1 630 19.3 – – 3.52 2 800 24.2 17.1 9.10 3.70
2* 630 25.4 15.1 8.85 3.34
1 630 19.3 – – 3.54 2 800 24.2 17.0 9.10 3.72
2* 630 25.4 15.0 8.85 3.36
1 630 19.5 – – 3.70 2 800 24.4 17.0 9.15 3.82
2* 630 25.8 15.1 8.95 3.52
1 630 19.3 – – 3.54 2 800 24.2 17.0 9.10 3.72
2* 630 25.4 15.0 8.85 3.36
RATED
CFM
HEATING
2
NET MBH
47°F OD 17°F OD
3
1109431-YTG-A-0714
HSPF COP @ 47°F
Johnson Controls Unitary Products 27
Page 28
1109431-YTG-A-0714
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE
MODEL
COIL
MODEL
1
STAGE
RATED
CFM
HEATING
NET MBH
47°F OD 17°F OD
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
1 630 19.3 – – 3.50
TM8X100C16MP11 FC/MC/PC43C
2 800 24.2 17.2 9.10 3.66
2* 630 25.4 15.2 8.80 3.30
1 630 19.3 – – 3.52
TM8X100C16MP11 FC/MC/PC48C
2 800 24.2 17.1 9.10 3.70
2* 630 25.4 15.1 8.85 3.34
1 630 19.3 – – 3.54
TM8X100C16MP11 FC/PC60C
2 800 24.2 17.0 9.10 3.72
2* 630 25.4 15.0 8.85 3.36
1 630 19.5 – – 3.70
TM8X100C16MP11 UC48C
2 800 24.4 17.0 9.15 3.82
2* 630 25.8 15.1 8.95 3.52
1 630 19.3 – – 3.54
TM8X100C16MP11 UC60C
2 800 24.2 17.0 9.10 3.72
2* 630 25.4 15.0 8.85 3.36
1 630 19.3 – – 3.50
TMLX080C16MP11 FC/MC/PC43C
2 800 24.2 17.2 9.10 3.66
2* 630 25.4 15.2 8.80 3.30
1 630 19.3 – – 3.52
TMLX080C16MP11 FC/MC/PC48C
2 800 24.2 17.1 9.10 3.70
2* 630 25.4 15.1 8.85 3.34
1 630 19.3 – – 3.54
TMLX080C16MP11 FC/PC60C
2 800 24.2 17.0 9.10 3.72
2* 630 25.4 15.0 8.85 3.36
1 630 19.5 – – 3.70
TMLX080C16MP11 UC48C
YZH02412C
TMLX080C16MP11 UC60C
2 800 24.4 17.0 9.15 3.82
2* 630 25.8 15.1 8.95 3.52
1 630 19.3 – – 3.54 2 800 24.2 17.0 9.10 3.72
2* 630 25.4 15.0 8.85 3.36
1 630 19.3 – – 3.50
TMLX100C16MP11 FC/MC/PC43C
2 800 24.2 17.2 9.10 3.66
2* 630 25.4 15.2 8.80 3.30
1 630 19.3 – – 3.52
TMLX100C16MP11 FC/MC/PC48C
2 800 24.2 17.1 9.10 3.70
2* 630 25.4 15.1 8.85 3.34
1 630 19.3 – – 3.54
TMLX100C16MP11 FC/PC60C
2 800 24.2 17.0 9.10 3.72
2* 630 25.4 15.0 8.85 3.36
1 630 19.5 – – 3.70
TMLX100C16MP11 UC48C
2 800 24.4 17.0 9.15 3.82
2* 630 25.8 15.1 8.95 3.52
1 630 19.3 – – 3.54
TMLX100C16MP11 UC60C
2 800 24.2 17.0 9.10 3.72
2* 630 25.4 15.0 8.85 3.36
1 585 19.2 – – 3.42
Y*LC*A12 FC/MC/PC37A
2 765 23.8 17.0 9.50 3.70
2* 585 25.4 15.2 9.00 3.22
1 515 19.2 – – 3.24
Y*LC*B12 FC/MC/PC43B
2 790 23.8 16.9 9.60 3.76
2* 515 24.8 15.3 9.20 3.02
1 645 19.3 – – 3.54
Y*LC*C16 FC/MC/PC43C
2 770 23.8 16.9 9.70 3.76
2* 645 25.6 15.2 9.50 3.36
For notes, see Page 52.
28 Johnson Controls Unitary Products
2
HSPF COP @ 47°F
3
Page 29
1109431-YTG-A-0714
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE
MODEL
COIL
MODEL
1
STAGE
RATED
CFM
HEATING
NET MBH
47°F OD 17°F OD
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
1 550 19.0 – – 3.36
Y*9C*B12 FC/MC/PC43B
2 800 24.0 17.0 9.45 3.76
2* 550 25.2 15.2 8.85 3.16
1 635 19.1 – – 3.58
Y*9C*C16 FC/MC/PC48C
2 890 24.2 16.9 9.55 3.92
2* 635 25.4 15.0 9.05 3.40
1 635 19.2 – – 3.60
Y*9C*C16 FC/PC60C
2 890 24.2 16.8 9.65 3.92
2* 635 25.4 15.0 9.15 3.38
1 635 19.5 – – 3.76
Y*9C*C16 UC48C
YZH02412C
Y*9C*C16 UC60C
2 890 24.2 16.8 9.65 4.04
2* 635 25.8 15.0 9.25 3.58
1 635 19.2 – – 3.60 2 890 24.2 16.8 9.65 3.92
2* 635 25.4 15.0 9.15 3.38
1 630 19.2 – – 3.54
Y*9C*C20 FC/MC/PC43C
2 890 24.2 16.9 9.60 3.90
2* 630 25.2 15.1 9.05 3.34
1 630 19.1 – – 3.58
Y*9C*C20 FC/MC/PC48C
2 890 24.2 16.9 9.55 3.92
2* 630 25.4 15.0 9.05 3.38
1 630 19.5 – – 3.76
Y*9C*C20 UC48C
2 890 24.2 16.8 9.65 4.04
2* 630 25.8 15.0 9.25 3.58
1 730 25.5 – – 3.26
T*(8,L)V*A12 FC/MC/PC37A
2 1150 36.0 25.0 9.25 3.80
2* 730 36.0 24.0 8.50 2.90
1 860 26.3 – – 3.48
T*(8,L)V*B12 FC/MC/PC43B
2 1275 36.5 25.2 9.25 3.90
2* 860 36.2 24.0 9.20 3.18
1 770 25.5 – – 3.38
T*(8,L)V*C16 FC/MC/PC43C
2 1190 35.8 24.6 9.65 3.98
2* 770 35.2 23.8 9.35 3.08
1 725 25.7 – – 3.32
T*(8,L)V*C16 FC/MC/PC48C
2 1195 35.8 24.6 9.80 4.06
2* 725 36.4 23.8 8.80 2.96
1 710 25.9 – – 3.36
T*(8,L)V*C16 FC/PC60C
YZH03612C
T*(8,L)V*C16 UC48C
2 1185 35.4 24.2 9.80 3.96
2* 710 35.6 23.4 9.60 2.96
1 810 26.7 – – 3.68 2 1210 36.0 24.6 9.90 4.18
2* 810 36.8 23.6 9.25 3.36
1 810 25.5 – – 3.34
T*(8,L)V*C16 UC60C
2 1195 35.6 23.6 9.75 3.96
2* 810 35.2 22.8 9.55 3.10
1 740 25.3 – – 3.34
T*(8,L)V*C20 FC/MC/PC43C
2 1190 35.8 24.6 9.70 3.98
2* 740 35.6 23.8 8.85 3.00
1 715 25.5 – – 3.32
T*(8,L)V*C20 FC/MC/PC48C
2 1150 35.6 24.6 9.80 4.02
2* 715 35.8 23.8 9.80 2.98
1 800 26.1 – – 3.50
T*(8,L)V*C20 FC/PC60C
2 1215 35.8 24.4 9.80 4.04
2* 800 34.8 23.4 9.35 3.20
For notes, see Page 52.
Johnson Controls Unitary Products 29
2
HSPF COP @ 47°F
3
Page 30
1109431-YTG-A-0714
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE
MODEL
COIL
MODEL
1
STAGE
RATED
CFM
HEATING
NET MBH
47°F OD 17°F OD
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
1 720 26.3 – – 3.54
T*(8,L)V*C20 UC48C
2 1155 36.0 24.4 9.95 4.14
2* 720 35.0 23.8 9.70 3.22
1 800 25.5 – – 3.34
T*(8,L)V*C20 UC60C
2 1215 35.6 23.6 9.75 3.96
2* 800 35.2 22.8 9.55 3.10
1 815 25.5 – – 3.42
T*9V*B12 FC/MC/PC43B
2 1200 36.0 25.0 9.30 3.86
2* 815 34.4 23.8 8.80 3.18
1 815 25.9 – – 3.44
T*9V*C16 FC/MC/PC43C
2 1240 36.0 25.0 9.45 3.94
2* 815 34.4 24.0 8.90 3.18
1 780 25.7 – – 3.44
T*9V*C16 FC/MC/PC48C
2 1195 35.8 24.8 9.60 3.96
2* 780 36.0 23.6 8.95 3.12
1 810 26.3 – – 3.48
T*9V*C16 FC/PC60C
2 1235 36.0 24.8 9.55 3.96
2* 810 36.0 23.6 8.85 3.12
1 780 26.3 – – 3.60
T*9V*C16 UC48C
2 1195 36.0 24.6 9.70 4.06
2* 780 36.4 23.8 9.10 3.28
1 810 25.7 – – 3.36
T*9V*C16 UC60C
2 1235 36.0 24.2 9.50 3.94
2* 810 35.6 23.0 9.45 3.10
1 780 25.3 – – 3.40
T*9V*C20 FC/MC/PC43C
YZH03612C
T*9V*C20 FC/MC/PC48C
2 1200 35.8 24.8 9.60 3.96
2* 780 35.8 23.8 8.85 3.06
1 745 25.9 – – 3.38 2 1330 36.5 25.0 9.55 4.06
2* 745 35.6 23.8 8.65 3.04
1 770 26.1 – – 3.44
T*9V*C20 FC/PC60C
2 1330 36.5 24.8 9.55 4.04
2* 770 36.0 23.6 8.65 3.04
1 755 26.7 – – 3.56
T*9V*C20 UC48C
2 1330 37.0 25.0 9.60 4.14
2* 755 36.8 24.0 8.85 3.24
1 770 25.7 – – 3.30
T*9V*C20 UC60C
2 1330 36.5 24.4 9.55 4.02
2* 770 35.8 23.0 8.65 3.02
1 830 25.9 – – 3.52
T*9V*D20 FC/MC/PC48D
2 1240 36.0 24.8 9.75 4.08
2* 830 36.0 23.8 9.70 3.22
1 830 26.1 – – 3.54
T*9V*D20 FC/MC/PC60D
2 1225 35.8 24.6 9.70 4.02
2* 830 35.8 23.6 9.60 3.18
1 835 25.9 – – 3.54
T*9V*D20 FC/MC62D
2 1235 36.0 24.2 9.80 4.12
2* 835 36.0 23.2 9.70 3.28
1 835 26.7 – – 3.72
T*9V*D20 FC64D
2 1235 36.5 24.6 9.90 4.26
2* 835 36.4 23.4 9.85 3.42
1 830 26.7 – – 3.70
T*9V*D20 UC48D
2 1240 36.5 24.6 9.85 4.18
2* 830 36.8 23.6 9.25 3.40
For notes, see Page 52.
30 Johnson Controls Unitary Products
2
HSPF COP @ 47°F
3
Page 31
1109431-YTG-A-0714
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE
MODEL
COIL
MODEL
1
STAGE
RATED
CFM
HEATING
NET MBH
47°F OD 17°F OD
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
1 830 25.7 – – 3.40
T*9V*D20 UC60D
2 1225 35.8 24.0 9.70 3.98
2* 830 34.6 23.0 9.20 3.20
1 770 25.5 – – 3.38
TM8X060A12MP11 FC/MC/PC37A
2 1125 35.8 25.0 9.30 3.80
2* 770 35.2 23.8 8.75 3.08
1 805 25.5 – – 3.38
TM8X080B12MP11 FC/MC/PC43B
2 1175 35.8 25.0 9.35 3.80
2* 805 35.2 23.8 8.80 3.08
1 775 25.3 – – 3.42
TM8X080C16MP11 FC/MC/PC43C
2 1150 35.6 24.6 9.70 3.90
2* 775 35.2 23.6 9.00 3.10
1 775 25.7 – – 3.50
TM8X080C16MP11 FC/MC/PC48C
2 1150 35.8 24.6 9.75 4.00
2* 775 35.8 23.6 9.05 3.14
1 805 25.7 – – 3.50
TM8X080C16MP11 FC/MC/PC48D
2 1175 35.8 24.6 9.80 4.00
2* 805 35.8 23.6 9.05 3.14
1 800 25.9 – – 3.54
TM8X080C16MP11 FC/MC/PC60D
2 1175 35.6 24.4 9.75 4.00
2* 800 34.6 23.4 9.70 3.24
1 785 25.5 – – 3.54
TM8X080C16MP11 FC/MC62D
2 1175 35.8 23.8 9.85 4.08
2* 785 35.6 22.8 9.10 3.22
1 790 25.9 – – 3.52
TM8X080C16MP11 FC/PC60C
YZH03612C
TM8X080C16MP11 FC64D
2 1175 35.6 24.4 9.75 3.98
2* 790 35.6 23.4 9.05 3.14
1 795 26.3 – – 3.68 2 1175 36.0 24.4 9.95 4.18
2* 795 36.2 23.4 9.20 3.32
1 775 26.3 – – 3.66
TM8X080C16MP11 UC48C
2 1150 36.0 24.6 9.85 4.12
2* 775 36.4 23.6 9.20 3.32
1 805 26.3 – – 3.64
TM8X080C16MP11 UC48D
2 1175 36.0 24.4 9.85 4.12
2* 805 36.4 23.6 9.25 3.30
1 790 25.3 – – 3.38
TM8X080C16MP11 UC60C
2 1175 35.6 23.8 9.70 3.96
2* 790 35.0 22.8 9.05 3.12
1 800 25.3 – – 3.38
TM8X080C16MP11 UC60D
2 1175 35.6 23.8 9.75 3.96
2* 800 35.0 22.8 9.05 3.12
1 775 25.3 – – 3.42
TM8X100C16MP11 FC/MC/PC43C
2 1150 35.6 24.6 9.70 3.90
2* 775 35.2 23.6 9.00 3.10
1 775 25.7 – – 3.50
TM8X100C16MP11 FC/MC/PC48C
2 1150 35.8 24.6 9.75 4.00
2* 775 35.8 23.6 9.05 3.14
1 805 25.7 – – 3.50
TM8X100C16MP11 FC/MC/PC48D
2 1175 35.8 24.6 9.80 4.00
2* 805 35.8 23.6 9.05 3.14
1 800 25.9 – – 3.54
TM8X100C16MP11 FC/MC/PC60D
2 1175 35.6 24.4 9.75 4.00
2* 800 34.6 23.4 9.70 3.24
For notes, see Page 52.
Johnson Controls Unitary Products 31
2
HSPF COP @ 47°F
3
Page 32
1109431-YTG-A-0714
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE
MODEL
COIL
MODEL
1
STAGE
RATED
CFM
HEATING
NET MBH
47°F OD 17°F OD
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
1 785 25.5 – – 3.54
TM8X100C16MP11 FC/MC62D
2 1175 35.8 23.8 9.85 4.08
2* 785 35.6 22.8 9.10 3.22
1 790 25.9 – – 3.52
TM8X100C16MP11 FC/PC60C
2 1175 35.6 24.4 9.75 3.98
2* 790 35.6 23.4 9.05 3.14
1 795 26.3 – – 3.68
TM8X100C16MP11 FC64D
2 1175 36.0 24.4 9.95 4.18
2* 795 36.2 23.4 9.20 3.32
1 775 26.3 – – 3.66
TM8X100C16MP11 UC48C
2 1150 36.0 24.6 9.85 4.12
2* 775 36.4 23.6 9.20 3.32
1 805 26.3 – – 3.64
TM8X100C16MP11 UC48D
2 1175 36.0 24.4 9.85 4.12
2* 805 36.4 23.6 9.25 3.30
1 790 25.3 – – 3.38
TM8X100C16MP11 UC60C
2 1175 35.6 23.8 9.70 3.96
2* 790 35.0 22.8 9.05 3.12
1 800 25.3 – – 3.38
TM8X100C16MP11 UC60D
2 1175 35.6 23.8 9.75 3.96
2* 800 35.0 22.8 9.05 3.12
1 770 25.5 – – 3.38
TMLX060A12MP11 FC/MC/PC37A
2 1125 35.8 25.0 9.30 3.80
2* 770 35.2 23.8 8.75 3.08
1 805 25.5 – – 3.38
TMLX080B12MP11 FC/MC/PC43B
YZH03612C
TMLX080C16MP11 FC/MC/PC43C
2 1175 35.8 25.0 9.35 3.80
2* 805 35.2 23.8 8.80 3.08
1 775 25.3 – – 3.42 2 1150 35.6 24.6 9.70 3.90
2* 775 35.2 23.6 9.00 3.10
1 775 25.7 – – 3.50
TMLX080C16MP11 FC/MC/PC48C
2 1150 35.8 24.6 9.75 4.00
2* 775 35.8 23.6 9.05 3.14
1 805 25.7 – – 3.50
TMLX080C16MP11 FC/MC/PC48D
2 1175 35.8 24.6 9.80 4.00
2* 805 35.8 23.6 9.05 3.14
1 800 25.9 – – 3.54
TMLX080C16MP11 FC/MC/PC60D
2 1175 35.6 24.4 9.75 4.00
2* 800 34.6 23.4 9.70 3.24
1 785 25.5 – – 3.54
TMLX080C16MP11 FC/MC62D
2 1175 35.8 23.8 9.85 4.08
2* 785 35.6 22.8 9.10 3.22
1 790 25.9 – – 3.52
TMLX080C16MP11 FC/PC60C
2 1175 35.6 24.4 9.75 3.98
2* 790 35.6 23.4 9.05 3.14
1 795 26.3 – – 3.68
TMLX080C16MP11 FC64D
2 1175 36.0 24.4 9.95 4.18
2* 795 36.2 23.4 9.20 3.32
1 775 26.3 – – 3.66
TMLX080C16MP11 UC48C
2 1150 36.0 24.6 9.85 4.12
2* 775 36.4 23.6 9.20 3.32
1 805 26.3 – – 3.64
TMLX080C16MP11 UC48D
2 1175 36.0 24.4 9.85 4.12
2* 805 36.4 23.6 9.25 3.30
For notes, see Page 52.
32 Johnson Controls Unitary Products
2
HSPF COP @ 47°F
3
Page 33
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH03612C
For notes, see Page 52.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
TMLX080C16MP11 UC60C
TMLX080C16MP11 UC60D
TMLX100C16MP11 FC/MC/PC43C
TMLX100C16MP11 FC/MC/PC48C
TMLX100C16MP11 FC/MC/PC48D
TMLX100C16MP11 FC/MC/PC60D
TMLX100C16MP11 FC/MC62D
TMLX100C16MP11 FC/PC60C
TMLX100C16MP11 FC64D
TMLX100C16MP11 UC48C
TMLX100C16MP11 UC48D
TMLX100C16MP11 UC60C
TMLX100C16MP11 UC60D
TM9E060B12MP11 FC/MC/PC43B
TM9E080B12MP11 FC/MC/PC43B
TM9E080C16MP11 FC/MC/PC48D
TM9E080C16MP11 FC/MC62D
COIL
MODEL
1
STAGE
RATED
CFM
1 790 25.3 – – 3.38 2 1175 35.6 23.8 9.70 3.96
2* 790 35.0 22.8 9.05 3.12
1 800 25.3 – – 3.38 2 1175 35.6 23.8 9.75 3.96
2* 800 35.0 22.8 9.05 3.12
1 775 25.3 – – 3.42 2 1150 35.6 24.6 9.70 3.90
2* 775 35.2 23.6 9.00 3.10
1 775 25.7 – – 3.50 2 1150 35.8 24.6 9.75 4.00
2* 775 35.8 23.6 9.05 3.14
1 805 25.7 – – 3.50 2 1175 35.8 24.6 9.80 4.00
2* 805 35.8 23.6 9.05 3.14
1 800 25.9 – – 3.54 2 1175 35.6 24.4 9.75 4.00
2* 800 34.6 23.4 9.70 3.24
1 785 25.5 – – 3.54 2 1175 35.8 23.8 9.85 4.08
2* 785 35.6 22.8 9.10 3.22
1 790 25.9 – – 3.52 2 1175 35.6 24.4 9.75 3.98
2* 790 35.6 23.4 9.05 3.14
1 795 26.3 – – 3.68 2 1175 36.0 24.4 9.95 4.18
2* 795 36.2 23.4 9.20 3.32
1 775 26.3 – – 3.66 2 1150 36.0 24.6 9.85 4.12
2* 775 36.4 23.6 9.20 3.32
1 805 26.3 – – 3.64 2 1175 36.0 24.4 9.85 4.12
2* 805 36.4 23.6 9.25 3.30
1 790 25.3 – – 3.38 2 1175 35.6 23.8 9.70 3.96
2* 790 35.0 22.8 9.05 3.12
1 800 25.3 – – 3.38 2 1175 35.6 23.8 9.75 3.96
2* 800 35.0 22.8 9.05 3.12
1 730 25.3 – – 3.32 2 1125 35.8 25.0 9.35 3.80
2* 730 35.8 23.8 8.60 2.94
1 730 25.3 – – 3.32 2 1125 35.8 25.0 9.35 3.80
2* 730 35.8 23.8 8.60 2.94
1 775 25.7 – – 3.48 2 1175 35.8 24.8 9.60 3.96
2* 775 35.8 23.6 8.95 3.14
1 765 25.3 – – 3.50 2 1175 36.0 24.0 9.70 4.04
2* 765 35.6 22.8 8.95 3.14
HEATING
2
NET MBH
47°F OD 17°F OD
3
1109431-YTG-A-0714
HSPF COP @ 47°F
Johnson Controls Unitary Products 33
Page 34
1109431-YTG-A-0714
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH03612C
For notes, see Page 52.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
TM9E080C16MP11 FC64D
TM9E080C16MP11 UC48D
TM9E100C16MP11 FC/MC/PC48D
TM9E100C16MP11 FC/MC62D
TM9E100C16MP11 FC64D
TM9E100C16MP11 UC48D
TM9X060B12MP11 FC/MC/PC43B
TM9X080B12MP11 FC/MC/PC43B
TM9X080C16MP11 FC/MC/PC48D
TM9X080C16MP11 FC/MC62D
TM9X080C16MP11 FC64D
TM9X080C16MP11 UC48D
TM9X100C16MP11 FC/MC/PC48D
TM9X100C16MP11 FC/MC62D
TM9X100C16MP11 FC64D
TM9X100C16MP11 UC48D
Y*LC*A12 FC/MC/PC37A
COIL
MODEL
1
STAGE
RATED
CFM
1 775 26.3 – – 3.66 2 1175 36.5 24.6 9.80 4.14
2* 775 36.4 23.4 9.15 3.30
1 775 26.3 – – 3.64 2 1175 36.0 24.6 9.70 4.06
2* 775 36.4 23.6 9.10 3.30
1 775 25.7 – – 3.48 2 1175 35.8 24.8 9.60 3.96
2* 775 35.8 23.6 8.95 3.14
1 765 25.3 – – 3.50 2 1175 36.0 24.0 9.70 4.04
2* 765 35.6 22.8 8.95 3.14
1 775 26.3 – – 3.66 2 1175 36.5 24.6 9.80 4.14
2* 775 36.4 23.4 9.15 3.30
1 775 26.3 – – 3.64 2 1175 36.0 24.6 9.70 4.06
2* 775 36.4 23.6 9.10 3.30
1 730 25.3 – – 3.32 2 1125 35.8 25.0 9.35 3.80
2* 730 35.8 23.8 8.60 2.94
1 730 25.3 – – 3.32 2 1125 35.8 25.0 9.35 3.80
2* 730 35.8 23.8 8.60 2.94
1 775 25.7 – – 3.48 2 1175 35.8 24.8 9.60 3.96
2* 775 35.8 23.6 8.95 3.14
1 765 25.3 – – 3.50 2 1175 36.0 24.0 9.70 4.04
2* 765 35.6 22.8 8.95 3.14
1 775 26.3 – – 3.66 2 1175 36.5 24.6 9.80 4.14
2* 775 36.4 23.4 9.15 3.30
1 775 26.3 – – 3.64 2 1175 36.0 24.6 9.70 4.06
2* 775 36.4 23.6 9.10 3.30
1 775 25.7 – – 3.48 2 1175 35.8 24.8 9.60 3.96
2* 775 35.8 23.6 8.95 3.14
1 765 25.3 – – 3.50 2 1175 36.0 24.0 9.70 4.04
2* 765 35.6 22.8 8.95 3.14
1 775 26.3 – – 3.66 2 1175 36.5 24.6 9.80 4.14
2* 775 36.4 23.4 9.15 3.30
1 775 26.3 – – 3.64 2 1175 36.0 24.6 9.70 4.06
2* 775 36.4 23.6 9.10 3.30
1 730 25.5 – – 3.26 2 1150 36.0 25.0 9.25 3.80
2* 730 36.0 24.0 8.50 2.90
HEATING
2
NET MBH
47°F OD 17°F OD
3
HSPF COP @ 47°F
34 Johnson Controls Unitary Products
Page 35
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH03612C
For notes, see Page 52.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
Y*LC*B12 FC/MC/PC43B
Y*LC*C16 FC/MC/PC43C
Y*LC*C16 FC/MC/PC48C
Y*LC*C16 FC/PC60C
Y*LC*C16 UC48C
Y*LC*C16 UC60C
Y*LC*C20 FC/MC/PC43C
Y*LC*C20 FC/MC/PC48C
Y*LC*C20 FC/PC60C
Y*LC*C20 UC48C
Y*LC*C20 UC60C
Y*9C*B12 FC/MC/PC43B
Y*9C*C16 FC/MC/PC43C
Y*9C*C16 FC/MC/PC48C
Y*9C*C16 FC/PC60C
Y*9C*C16 UC48C
Y*9C*C16 UC60C
COIL
MODEL
1
STAGE
RATED
CFM
1 860 26.3 – – 3.48 2 1275 36.5 25.2 9.25 3.90
2* 860 36.2 24.0 9.20 3.18
1 770 25.5 – – 3.38 2 1190 35.8 24.6 9.65 3.98
2* 770 35.2 23.8 9.35 3.08
1 725 25.7 – – 3.32 2 1195 35.8 24.6 9.80 4.06
2* 725 36.4 23.8 8.80 2.96
1 710 25.9 – – 3.36 2 1185 35.4 24.2 9.80 3.96
2* 710 35.6 23.4 9.60 2.96
1 810 26.7 – – 3.68 2 1210 36.0 24.6 9.90 4.18
2* 810 36.8 23.6 9.25 3.36
1 810 25.5 – – 3.34 2 1195 35.6 23.6 9.75 3.96
2* 810 35.2 22.8 9.55 3.10
1 740 25.3 – – 3.34 2 1190 35.8 24.6 9.70 3.98
2* 740 35.6 23.8 8.85 3.00
1 715 25.5 – – 3.32 2 1150 35.6 24.6 9.80 4.02
2* 715 35.8 23.8 9.80 2.98
1 800 26.1 – – 3.50 2 1215 35.8 24.4 9.80 4.04
2* 800 34.8 23.4 9.35 3.20
1 720 26.3 – – 3.54 2 1155 36.0 24.4 9.95 4.14
2* 720 35.0 23.8 9.70 3.22
1 800 25.5 – – 3.34 2 1215 35.6 23.6 9.75 3.96
2* 800 35.2 22.8 9.55 3.10
1 815 25.5 – – 3.42 2 1200 36.0 25.0 9.30 3.86
2* 815 34.4 23.8 8.80 3.18
1 815 25.9 – – 3.44 2 1240 36.0 25.0 9.45 3.94
2* 815 34.4 24.0 8.90 3.18
1 780 25.7 – – 3.44 2 1195 35.8 24.8 9.60 3.96
2* 780 36.0 23.6 8.95 3.12
1 810 26.3 – – 3.48 2 1235 36.0 24.8 9.55 3.96
2* 810 36.0 23.6 8.85 3.12
1 780 26.3 – – 3.60 2 1195 36.0 24.6 9.70 4.06
2* 780 36.4 23.8 9.10 3.28
1 810 25.7 – – 3.36 2 1235 36.0 24.2 9.50 3.94
2* 810 35.6 23.0 9.45 3.10
HEATING
2
NET MBH
47°F OD 17°F OD
3
1109431-YTG-A-0714
HSPF COP @ 47°F
Johnson Controls Unitary Products 35
Page 36
1109431-YTG-A-0714
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH03612C
YZH04812C
For notes, see Page 52.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
Y*9C*C20 FC/MC/PC43C
Y*9C*C20 FC/MC/PC48C
Y*9C*C20 FC/PC60C
Y*9C*C20 UC48C
Y*9C*C20 UC60C
Y*9C*D20 FC/MC/PC48D
Y*9C*D20 FC/MC/PC60D
Y*9C*D20 FC/MC62D
Y*9C*D20 FC64D
Y*9C*D20 UC48D
Y*9C*D20 UC60D
T*(8,L)V*C16 FC/MC/PC48C
T*(8,L)V*C16 FC/MC/PC48D
T*(8,L)V*C16 FC/MC/PC60D
T*(8,L)V*C16 FC/MC62D
T*(8,L)V*C16 FC/PC60C
T*(8,L)V*C16 FC64D
COIL
MODEL
1
STAGE
RATED
CFM
1 780 25.3 – – 3.40 2 1200 35.8 24.8 9.60 3.96
2* 780 35.8 23.8 8.85 3.06
1 745 25.9 – – 3.38 2 1330 36.5 25.0 9.55 4.06
2* 745 35.6 23.8 8.65 3.04
1 770 26.1 – – 3.44 2 1330 36.5 24.8 9.55 4.04
2* 770 36.0 23.6 8.65 3.04
1 755 26.7 – – 3.56 2 1330 37.0 25.0 9.60 4.14
2* 755 36.8 24.0 8.85 3.24
1 770 25.7 – – 3.30 2 1330 36.5 24.4 9.55 4.02
2* 770 35.8 23.0 8.65 3.02
1 830 25.9 – – 3.52 2 1240 36.0 24.8 9.75 4.08
2* 830 36.0 23.8 9.70 3.22
1 830 26.1 – – 3.54 2 1225 35.8 24.6 9.70 4.02
2* 830 35.8 23.6 9.60 3.18
1 835 25.9 – – 3.54 2 1235 36.0 24.2 9.80 4.12
2* 835 36.0 23.2 9.70 3.28
1 835 26.7 – – 3.72 2 1235 36.5 24.6 9.90 4.26
2* 835 36.4 23.4 9.85 3.42
1 830 26.7 – – 3.70 2 1240 36.5 24.6 9.85 4.18
2* 830 36.8 23.6 9.25 3.40
1 830 25.7 – – 3.40 2 1225 35.8 24.0 9.70 3.98
2* 830 34.6 23.0 9.20 3.20
1 1120 34.4 – – 3.38 2 1565 48.5 33.0 9.55 3.68
2* 1120 46.5 30.0 9.05 3.22
1 1120 34.4 – – 3.38 2 1565 48.5 33.0 9.55 3.68
2* 1120 46.5 30.0 9.05 3.22
1 1025 34.2 – – 3.28 2 1600 48.0 32.6 9.60 3.70
2* 1025 46.0 29.6 9.10 3.08
1 1025 34.0 – – 3.38 2 1635 48.5 32.2 9.80 3.86
2* 1025 46.0 29.0 9.25 3.16
1 1025 34.2 – – 3.28 2 1600 48.0 32.6 9.60 3.70
2* 1025 46.0 29.6 9.10 3.08
1 1025 34.6 – – 3.54 2 1635 48.5 32.6 9.90 3.96
2* 1025 47.0 29.8 9.45 3.34
HEATING
2
NET MBH
47°F OD 17°F OD
3
HSPF COP @ 47°F
36 Johnson Controls Unitary Products
Page 37
1109431-YTG-A-0714
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE
MODEL
COIL
MODEL
1
STAGE
RATED
CFM
HEATING
NET MBH
47°F OD 17°F OD
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
1 1035 34.8 – – 3.46
T*(8,L)V*C16 UC48C
2 1615 48.5 32.6 9.75 3.84
2* 1035 47.0 29.8 9.40 3.26
1 1035 33.6 – – 3.24
T*(8,L)V*C16 UC60C
2 1625 48.0 32.0 9.65 3.72
2* 1035 46.0 29.2 9.25 3.08
1 1080 34.0 – – 3.32
T*(8,L)V*C20 FC/MC/PC48C
2 1640 48.5 32.8 9.70 3.76
2* 1080 46.0 29.8 9.20 3.12
1 1080 34.0 – – 3.32
T*(8,L)V*C20 FC/MC/PC48D
2 1640 48.5 32.8 9.70 3.76
2* 1080 46.0 29.8 9.20 3.12
1 1060 34.2 – – 3.28
T*(8,L)V*C20 FC/MC/PC60D
2 1625 48.0 32.6 9.65 3.72
2* 1060 46.0 29.6 9.10 3.08
1 1060 34.2 – – 3.40
T*(8,L)V*C20 FC/MC62D
2 1620 48.0 32.2 9.85 3.88
2* 1060 46.0 29.2 9.20 3.22
1 1060 34.2 – – 3.28
T*(8,L)V*C20 FC/PC60C
2 1625 48.0 32.6 9.65 3.72
2* 1060 46.0 29.6 9.10 3.08
1 1060 34.8 – – 3.52
T*(8,L)V*C20 FC64D
2 1630 48.5 32.4 9.95 4.00
2* 1060 47.0 29.8 9.40 3.34
1 1080 35.0 – – 3.48
T*(8,L)V*C20 UC48C
YZH04812C
T*(8,L)V*C20 UC60C
2 1640 48.5 32.6 9.75 3.84
2* 1080 47.0 30.0 9.30 3.30
1 1015 33.6 – – 3.22 2 1605 48.0 31.8 9.75 3.74
2* 1015 46.0 29.0 9.35 3.04
1 1050 34.0 – – 3.30
T*9V*C16 FC/MC/PC48C
2 1590 48.5 32.8 9.65 3.74
2* 1050 46.5 29.8 9.05 3.10
1 1050 34.0 – – 3.30
T*9V*C16 FC/MC/PC48D
2 1590 48.5 32.8 9.65 3.74
2* 1050 46.5 29.8 9.05 3.10
1 1050 34.4 – – 3.28
T*9V*C16 FC/MC/PC60D
2 1590 48.0 32.8 9.60 3.68
2* 1050 46.0 29.6 9.05 3.06
1 1040 34.2 – – 3.38
T*9V*C16 FC/MC62D
2 1590 48.5 32.4 9.75 3.80
2* 1040 46.0 29.2 9.15 3.18
1 1050 34.4 – – 3.28
T*9V*C16 FC/PC60C
2 1590 48.0 32.8 9.60 3.68
2* 1050 46.0 29.6 9.05 3.06
1 1040 34.8 – – 3.52
T*9V*C16 FC64D
2 1590 49.0 32.6 9.85 3.94
2* 1040 47.0 30.0 9.35 3.32
1 1050 34.8 – – 3.42
T*9V*C16 UC48C
2 1590 48.5 32.8 9.65 3.74
2* 1050 46.5 30.0 9.20 3.22
1 1050 33.8 – – 3.18
T*9V*C16 UC60C
2 1590 48.0 32.0 9.55 3.60
2* 1050 46.0 29.2 9.05 3.02
For notes, see Page 52.
Johnson Controls Unitary Products 37
2
HSPF COP @ 47°F
3
Page 38
1109431-YTG-A-0714
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH04812C
For notes, see Page 52.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
T*9V*C20 FC/MC/PC48C
T*9V*C20 FC/MC/PC48D
T*9V*C20 FC/MC/PC60D
T*9V*C20 FC/MC62D
T*9V*C20 FC/PC60C
T*9V*C20 FC64D
T*9V*C20 UC48C
T*9V*C20 UC60C
T*9V*D20 FC/MC/PC48D
T*9V*D20 FC/MC/PC60D
T*9V*D20 FC/MC62D
T*9V*D20 FC64D
T*9V*D20 UC48D
T*9V*D20 UC60D
TM8X080C16MP11 FC/MC/PC48C
TM8X080C16MP11 FC/MC/PC48D
TM8X080C16MP11 FC/MC/PC60D
COIL
MODEL
1
STAGE
RATED
CFM
1 1055 34.0 – – 3.32 2 1655 48.5 32.8 9.65 3.74
2* 1055 46.0 29.8 9.15 3.12
1 1055 34.0 – – 3.32 2 1655 48.5 32.8 9.65 3.74
2* 1055 46.0 29.8 9.15 3.12
1 1055 34.2 – – 3.28 2 1655 48.0 32.8 9.60 3.68
2* 1055 46.0 29.6 9.10 3.08
1 1040 34.0 – – 3.38 2 1655 48.5 32.6 9.65 3.80
2* 1040 46.5 29.2 9.20 3.18
1 1055 34.2 – – 3.28 2 1655 48.0 32.8 9.60 3.68
2* 1055 46.0 29.6 9.10 3.08
1 1040 34.8 – – 3.52 2 1655 49.0 32.8 9.75 3.90
2* 1040 47.0 30.0 9.35 3.32
1 1055 35.0 – – 3.46 2 1655 48.5 32.6 9.70 3.84
2* 1055 47.0 30.0 9.35 3.28
1 1055 34.0 – – 3.24 2 1655 48.0 32.2 9.60 3.70
2* 1055 46.5 29.0 9.15 3.08
1 1060 34.0 – – 3.30 2 1645 48.5 32.8 9.65 3.74
2* 1060 46.0 29.8 9.10 3.10
1 1070 34.4 – – 3.28 2 1615 48.0 32.6 9.65 3.70
2* 1070 46.0 29.6 9.10 3.06
1 1085 34.2 – – 3.42 2 1630 48.5 32.4 9.75 3.82
2* 1085 46.5 29.4 9.10 3.24
1 1085 34.8 – – 3.50 2 1630 49.0 32.6 9.80 3.94
2* 1085 47.0 30.0 9.30 3.32
1 1060 35.0 – – 3.46 2 1645 48.5 32.6 9.70 3.84
2* 1060 47.0 30.2 9.35 3.28
1 1070 33.8 – – 3.26 2 1615 48.0 32.0 9.65 3.70
2* 1070 46.5 29.0 9.15 3.10
1 1030 33.8 – – 3.36 2 1525 48.0 32.8 9.65 3.70
2* 1030 46.0 29.6 9.00 3.14
1 1045 33.8 – – 3.36 2 1550 48.0 32.8 9.70 3.78
2* 1045 46.0 29.6 9.00 3.14
1 1045 34.2 – – 3.34 2 1550 48.0 32.6 9.65 3.72
2* 1045 46.0 29.6 8.95 3.10
HEATING
2
NET MBH
47°F OD 17°F OD
3
HSPF COP @ 47°F
38 Johnson Controls Unitary Products
Page 39
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH04812C
For notes, see Page 52.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
TM8X080C16MP11 FC/MC62D
TM8X080C16MP11 FC/PC60C
TM8X080C16MP11 FC64D
TM8X080C16MP11 UC48C
TM8X080C16MP11 UC48D
TM8X080C16MP11 UC60C
TM8X080C16MP11 UC60D
TM8X100C16MP11 FC/MC/PC48C
TM8X100C16MP11 FC/MC/PC48D
TM8X100C16MP11 FC/MC/PC60D
TM8X100C16MP11 FC/MC62D
TM8X100C16MP11 FC/PC60C
TM8X100C16MP11 FC64D
TM8X100C16MP11 UC48C
TM8X100C16MP11 UC48D
TM8X100C16MP11 UC60C
TM8X100C16MP11 UC60D
COIL
MODEL
1
STAGE
RATED
CFM
1 1040 33.8 – – 3.42 2 1550 48.0 32.2 9.70 3.78
2* 1040 46.0 29.0 9.05 3.22
1 1020 34.0 – – 3.32 2 1525 48.0 32.4 9.60 3.62
2* 1020 46.0 29.6 8.95 3.08
1 1045 34.6 – – 3.58 2 1550 48.5 32.6 9.85 3.96
2* 1045 46.5 29.8 9.20 3.36
1 1030 34.6 – – 3.48 2 1525 48.5 32.6 9.70 3.78
2* 1030 46.5 29.8 9.15 3.28
1 1045 34.6 – – 3.48 2 1550 48.0 32.6 9.70 3.78
2* 1045 46.5 29.8 9.15 3.28
1 1020 33.6 – – 3.24 2 1525 48.0 32.0 9.55 3.62
2* 1020 46.0 29.0 8.90 3.06
1 1045 33.6 – – 3.24 2 1550 48.0 32.0 9.60 3.62
2* 1045 46.0 29.0 8.95 3.06
1 1030 33.8 – – 3.36 2 1525 48.0 32.8 9.65 3.70
2* 1030 46.0 29.6 9.00 3.14
1 1045 33.8 – – 3.36 2 1550 48.0 32.8 9.70 3.78
2* 1045 46.0 29.6 9.00 3.14
1 1045 34.2 – – 3.34 2 1550 48.0 32.6 9.65 3.72
2* 1045 46.0 29.6 8.95 3.10
1 1040 33.8 – – 3.42 2 1550 48.0 32.2 9.70 3.78
2* 1040 46.0 29.0 9.05 3.22
1 1020 34.0 – – 3.32 2 1525 48.0 32.4 9.60 3.62
2* 1020 46.0 29.6 8.95 3.08
1 1045 34.6 – – 3.58 2 1550 48.5 32.6 9.85 3.96
2* 1045 46.5 29.8 9.20 3.36
1 1030 34.6 – – 3.48 2 1525 48.5 32.6 9.70 3.78
2* 1030 46.5 29.8 9.15 3.28
1 1045 34.6 – – 3.48 2 1550 48.0 32.6 9.70 3.78
2* 1045 46.5 29.8 9.15 3.28
1 1020 33.6 – – 3.24 2 1525 48.0 32.0 9.55 3.62
2* 1020 46.0 29.0 8.90 3.06
1 1045 33.6 – – 3.24 2 1550 48.0 32.0 9.60 3.62
2* 1045 46.0 29.0 8.95 3.06
HEATING
2
NET MBH
47°F OD 17°F OD
3
1109431-YTG-A-0714
HSPF COP @ 47°F
Johnson Controls Unitary Products 39
Page 40
1109431-YTG-A-0714
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH04812C
For notes, see Page 52.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
TM8X100C20MP11 FC/MC/PC48C
TM8X100C20MP11 FC/MC/PC48D
TM8X100C20MP11 FC/MC/PC60D
TM8X100C20MP11 FC/MC62D
TM8X100C20MP11 FC/PC60C
TM8X100C20MP11 UC48C
TM8X100C20MP11 UC48D
TM8X100C20MP11 UC60C
TM8X100C20MP11 UC60D
TM8X120C20MP11 FC/MC/PC48C
TM8X120C20MP11 FC/MC/PC48D
TM8X120C20MP11 FC/MC/PC60D
TM8X120C20MP11 FC/MC62D
TM8X120C20MP11 FC/PC60C
TM8X120C20MP11 UC48C
TM8X120C20MP11 UC48D
TM8X120C20MP11 UC60C
COIL
MODEL
1
STAGE
RATED
CFM
1 1090 34.2 – – 3.42 2 1550 48.0 32.6 9.70 3.74
2* 1090 46.0 29.8 9.25 3.20
1 1105 34.2 – – 3.44 2 1575 48.0 32.6 9.75 3.76
2* 1105 46.0 29.8 9.30 3.22
1 1105 34.2 – – 3.40 2 1575 48.0 32.2 9.70 3.72
2* 1105 46.0 29.6 9.25 3.18
1 1100 34.0 – – 3.48 2 1575 48.0 32.2 9.80 3.82
2* 1100 46.0 29.2 9.35 3.28
1 1085 34.2 – – 3.32 2 1550 48.0 32.4 9.70 3.74
2* 1085 46.0 29.6 9.25 3.08
1 1090 34.8 – – 3.54 2 1550 48.0 32.6 9.80 3.84
2* 1090 47.0 30.0 9.50 3.34
1 1105 34.8 – – 3.56 2 1575 48.0 32.6 9.80 3.86
2* 1105 47.0 29.8 9.25 3.36
1 1085 33.6 – – 3.32 2 1550 47.5 31.8 9.65 3.68
2* 1085 46.0 29.0 9.30 3.14
1 1105 33.8 – – 3.34 2 1575 48.0 31.8 9.70 3.70
2* 1105 46.0 29.2 9.30 3.16
1 1090 34.2 – – 3.42 2 1550 48.0 32.6 9.70 3.74
2* 1090 46.0 29.8 9.25 3.20
1 1105 34.2 – – 3.44 2 1575 48.0 32.6 9.75 3.76
2* 1105 46.0 29.8 9.30 3.22
1 1105 34.2 – – 3.40 2 1575 48.0 32.2 9.70 3.72
2* 1105 46.0 29.6 9.25 3.18
1 1100 34.0 – – 3.48 2 1575 48.0 32.2 9.80 3.82
2* 1100 46.0 29.2 9.35 3.28
1 1085 34.2 – – 3.32 2 1550 48.0 32.4 9.70 3.74
2* 1085 46.0 29.6 9.25 3.08
1 1090 34.8 – – 3.54 2 1550 48.0 32.6 9.80 3.84
2* 1090 47.0 30.0 9.50 3.34
1 1105 34.8 – – 3.56 2 1575 48.0 32.6 9.80 3.86
2* 1105 47.0 29.8 9.25 3.36
1 1085 33.6 – – 3.32 2 1550 47.5 31.8 9.65 3.68
2* 1085 46.0 29.0 9.30 3.14
HEATING
2
NET MBH
47°F OD 17°F OD
3
HSPF COP @ 47°F
40 Johnson Controls Unitary Products
Page 41
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH04812C
For notes, see Page 52.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
TM8X120C20MP11 UC60D
TMLX080C16MP11 FC/MC/PC48C
TMLX080C16MP11 FC/MC/PC48D
TMLX080C16MP11 FC/MC/PC60D
TMLX080C16MP11 FC/MC62D
TMLX080C16MP11 FC/PC60C
TMLX080C16MP11 FC64D
TMLX080C16MP11 UC48C
TMLX080C16MP11 UC48D
TMLX080C16MP11 UC60C
TMLX080C16MP11 UC60D
TMLX100C16MP11 FC/MC/PC48C
TMLX100C16MP11 FC/MC/PC48D
TMLX100C16MP11 FC/MC/PC60D
TMLX100C16MP11 FC/MC62D
TMLX100C16MP11 FC/PC60C
TMLX100C16MP11 FC64D
COIL
MODEL
1
STAGE
RATED
CFM
1 1105 33.8 – – 3.34 2 1575 48.0 31.8 9.70 3.70
2* 1105 46.0 29.2 9.30 3.16
1 1030 33.8 – – 3.36 2 1525 48.0 32.8 9.65 3.70
2* 1030 46.0 29.6 9.00 3.14
1 1045 33.8 – – 3.36 2 1550 48.0 32.8 9.70 3.78
2* 1045 46.0 29.6 9.00 3.14
1 1045 34.2 – – 3.34 2 1550 48.0 32.6 9.65 3.72
2* 1045 46.0 29.6 8.95 3.10
1 1040 33.8 – – 3.42 2 1550 48.0 32.2 9.70 3.78
2* 1040 46.0 29.0 9.05 3.22
1 1020 34.0 – – 3.32 2 1525 48.0 32.4 9.60 3.62
2* 1020 46.0 29.6 8.95 3.08
1 1045 34.6 – – 3.58 2 1550 48.5 32.6 9.85 3.96
2* 1045 46.5 29.8 9.20 3.36
1 1030 34.6 – – 3.48 2 1525 48.5 32.6 9.70 3.78
2* 1030 46.5 29.8 9.15 3.28
1 1045 34.6 – – 3.48 2 1550 48.0 32.6 9.70 3.78
2* 1045 46.5 29.8 9.15 3.28
1 1020 33.6 – – 3.24 2 1525 48.0 32.0 9.55 3.62
2* 1020 46.0 29.0 8.90 3.06
1 1045 33.6 – – 3.24 2 1550 48.0 32.0 9.60 3.62
2* 1045 46.0 29.0 8.95 3.06
1 1030 33.8 – – 3.36 2 1525 48.0 32.8 9.65 3.70
2* 1030 46.0 29.6 9.00 3.14
1 1045 33.8 – – 3.36 2 1550 48.0 32.8 9.70 3.78
2* 1045 46.0 29.6 9.00 3.14
1 1045 34.2 – – 3.34 2 1550 48.0 32.6 9.65 3.72
2* 1045 46.0 29.6 8.95 3.10
1 1040 33.8 – – 3.42 2 1550 48.0 32.2 9.70 3.78
2* 1040 46.0 29.0 9.05 3.22
1 1020 34.0 – – 3.32 2 1525 48.0 32.4 9.60 3.62
2* 1020 46.0 29.6 8.95 3.08
1 1045 34.6 – – 3.58 2 1550 48.5 32.6 9.85 3.96
2* 1045 46.5 29.8 9.20 3.36
HEATING
2
NET MBH
47°F OD 17°F OD
3
1109431-YTG-A-0714
HSPF COP @ 47°F
Johnson Controls Unitary Products 41
Page 42
1109431-YTG-A-0714
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH04812C
For notes, see Page 52.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
TMLX100C16MP11 UC48C
TMLX100C16MP11 UC48D
TMLX100C16MP11 UC60C
TMLX100C16MP11 UC60D
TMLX100C20MP11 FC/MC/PC48C
TMLX100C20MP11 FC/MC/PC48D
TMLX100C20MP11 FC/MC/PC60D
TMLX100C20MP11 FC/MC62D
TMLX100C20MP11 FC/PC60C
TMLX100C20MP11 UC48C
TMLX100C20MP11 UC48D
TMLX100C20MP11 UC60C
TMLX100C20MP11 UC60D
TMLX120C20MP11 FC/MC/PC48C
TMLX120C20MP11 FC/MC/PC48D
TMLX120C20MP11 FC/MC/PC60D
TMLX120C20MP11 FC/MC62D
COIL
MODEL
1
STAGE
RATED
CFM
1 1030 34.6 – – 3.48 2 1525 48.5 32.6 9.70 3.78
2* 1030 46.5 29.8 9.15 3.28
1 1045 34.6 – – 3.48 2 1550 48.0 32.6 9.70 3.78
2* 1045 46.5 29.8 9.15 3.28
1 1020 33.6 – – 3.24 2 1525 48.0 32.0 9.55 3.62
2* 1020 46.0 29.0 8.90 3.06
1 1045 33.6 – – 3.24 2 1550 48.0 32.0 9.60 3.62
2* 1045 46.0 29.0 8.95 3.06
1 1090 34.2 – – 3.42 2 1550 48.0 32.6 9.70 3.74
2* 1090 46.0 29.8 9.25 3.20
1 1105 34.2 – – 3.44 2 1575 48.0 32.6 9.75 3.76
2* 1105 46.0 29.8 9.30 3.22
1 1105 34.2 – – 3.40 2 1575 48.0 32.2 9.70 3.72
2* 1105 46.0 29.6 9.25 3.18
1 1100 34.0 – – 3.48 2 1575 48.0 32.2 9.80 3.82
2* 1100 46.0 29.2 9.35 3.28
1 1085 34.2 – – 3.32 2 1550 48.0 32.4 9.70 3.74
2* 1085 46.0 29.6 9.25 3.08
1 1090 34.8 – – 3.54 2 1550 48.0 32.6 9.80 3.84
2* 1090 47.0 30.0 9.50 3.34
1 1105 34.8 – – 3.56 2 1575 48.0 32.6 9.80 3.86
2* 1105 47.0 29.8 9.25 3.36
1 1085 33.6 – – 3.32 2 1550 47.5 31.8 9.65 3.68
2* 1085 46.0 29.0 9.30 3.14
1 1105 33.8 – – 3.34 2 1575 48.0 31.8 9.70 3.70
2* 1105 46.0 29.2 9.30 3.16
1 1090 34.2 – – 3.42 2 1550 48.0 32.6 9.70 3.74
2* 1090 46.0 29.8 9.25 3.20
1 1105 34.2 – – 3.44 2 1575 48.0 32.6 9.75 3.76
2* 1105 46.0 29.8 9.30 3.22
1 1105 34.2 – – 3.40 2 1575 48.0 32.2 9.70 3.72
2* 1105 46.0 29.6 9.25 3.18
1 1100 34.0 – – 3.48 2 1575 48.0 32.2 9.80 3.82
2* 1100 46.0 29.2 9.35 3.28
HEATING
2
NET MBH
47°F OD 17°F OD
3
HSPF COP @ 47°F
42 Johnson Controls Unitary Products
Page 43
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH04812C
For notes, see Page 52.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
TMLX120C20MP11 FC/PC60C
TMLX120C20MP11 UC48C
TMLX120C20MP11 UC48D
TMLX120C20MP11 UC60C
TMLX120C20MP11 UC60D
TM9E100C20MP11 FC/MC/PC48C
TM9E100C20MP11 FC/MC/PC48D
TM9E100C20MP11 FC/MC/PC60D
TM9E100C20MP11 FC/MC62D
TM9E100C20MP11 FC64D
TM9E100C20MP11 UC48C
TM9E100C20MP11 UC48D
TM9E100C20MP11 UC60D
TM9E120D20MP11 FC/MC/PC48D
TM9E120D20MP11 FC/MC/PC60D
TM9E120D20MP11 FC/MC62D
TM9E120D20MP11 FC64D
COIL
MODEL
1
STAGE
RATED
CFM
1 1085 34.2 – – 3.32 2 1550 48.0 32.4 9.70 3.74
2* 1085 46.0 29.6 9.25 3.08
1 1090 34.8 – – 3.54 2 1550 48.0 32.6 9.80 3.84
2* 1090 47.0 30.0 9.50 3.34
1 1105 34.8 – – 3.56 2 1575 48.0 32.6 9.80 3.86
2* 1105 47.0 29.8 9.25 3.36
1 1085 33.6 – – 3.32 2 1550 47.5 31.8 9.65 3.68
2* 1085 46.0 29.0 9.30 3.14
1 1105 33.8 – – 3.34 2 1575 48.0 31.8 9.70 3.70
2* 1105 46.0 29.2 9.30 3.16
1 945 33.8 – – 3.24 2 1500 48.0 32.6 9.55 3.64
2* 945 45.5 29.4 8.85 3.02
1 960 33.8 – – 3.26 2 1525 48.0 32.8 9.65 3.70
2* 960 45.5 29.4 8.85 3.04
1 960 34.0 – – 3.22 2 1525 48.0 32.4 9.60 3.64
2* 960 45.5 29.4 8.85 3.00
1 985 33.8 – – 3.36 2 1550 48.0 32.2 9.70 3.78
2* 985 46.0 29.0 9.00 3.16
1 980 34.4 – – 3.48 2 1550 48.5 32.6 9.80 3.90
2* 980 46.5 29.6 9.05 3.22
1 945 34.4 – – 3.40 2 1500 48.5 32.8 9.65 3.74
2* 945 46.5 29.8 8.95 3.16
1 960 34.6 – – 3.44 2 1525 48.5 32.6 9.70 3.78
2* 960 46.5 29.8 9.00 3.16
1 960 33.4 – – 3.16 2 1525 48.0 32.0 9.55 3.62
2* 960 45.5 28.8 8.80 2.98
1 965 33.8 – – 3.28 2 1525 48.0 32.6 9.65 3.70
2* 965 45.5 29.4 8.90 3.04
1 980 34.0 – – 3.26 2 1550 48.0 32.2 9.65 3.68
2* 980 45.5 29.2 8.90 3.04
1 980 33.8 – – 3.36 2 1550 48.0 32.2 9.75 3.80
2* 980 46.0 28.8 9.00 3.14
1 960 34.2 – – 3.46 2 1525 48.5 32.4 9.80 3.88
2* 960 46.0 29.6 9.00 3.18
HEATING
2
NET MBH
47°F OD 17°F OD
3
1109431-YTG-A-0714
HSPF COP @ 47°F
Johnson Controls Unitary Products 43
Page 44
1109431-YTG-A-0714
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH04812C
For notes, see Page 52.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
TM9E120D20MP11 UC48D
TM9E120D20MP11 UC60D
TM9X100C20MP11 FC/MC/PC48C
TM9X100C20MP11 FC/MC/PC48D
TM9X100C20MP11 FC/MC/PC60D
TM9X100C20MP11 FC/MC62D
TM9X100C20MP11 FC64D
TM9X100C20MP11 UC48C
TM9X100C20MP11 UC48D
TM9X100C20MP11 UC60D
TM9X120D20MP11 FC/MC/PC48D
TM9X120D20MP11 FC/MC/PC60D
TM9X120D20MP11 FC/MC62D
TM9X120D20MP11 FC64D
TM9X120D20MP11 UC48D
TM9X120D20MP11 UC60D
Y*LC*C16 FC/MC/PC48C
COIL
MODEL
1
STAGE
RATED
CFM
1 965 34.4 – – 3.44 2 1525 48.0 32.6 9.75 3.80
2* 965 46.5 29.8 9.00 3.18
1 980 33.4 – – 3.26 2 1550 47.5 31.8 9.65 3.64
2* 980 46.0 29.0 8.95 3.08
1 945 33.8 – – 3.24 2 1500 48.0 32.6 9.55 3.64
2* 945 45.5 29.4 8.85 3.02
1 960 33.8 – – 3.26 2 1525 48.0 32.8 9.65 3.70
2* 960 45.5 29.4 8.85 3.04
1 960 34.0 – – 3.22 2 1525 48.0 32.4 9.60 3.64
2* 960 45.5 29.4 8.85 3.00
1 985 33.8 – – 3.36 2 1550 48.0 32.2 9.70 3.78
2* 985 46.0 29.0 9.00 3.16
1 980 34.4 – – 3.48 2 1550 48.5 32.6 9.80 3.90
2* 980 46.5 29.6 9.05 3.22
1 945 34.4 – – 3.40 2 1500 48.5 32.8 9.65 3.74
2* 945 46.5 29.8 8.95 3.16
1 960 34.6 – – 3.44 2 1525 48.5 32.6 9.70 3.78
2* 960 46.5 29.8 9.00 3.16
1 960 33.4 – – 3.16 2 1525 48.0 32.0 9.55 3.62
2* 960 45.5 28.8 8.80 2.98
1 965 33.8 – – 3.28 2 1525 48.0 32.6 9.65 3.70
2* 965 45.5 29.4 8.90 3.04
1 980 34.0 – – 3.26 2 1550 48.0 32.2 9.65 3.68
2* 980 45.5 29.2 8.90 3.04
1 980 33.8 – – 3.36 2 1550 48.0 32.2 9.75 3.80
2* 980 46.0 28.8 9.00 3.14
1 960 34.2 – – 3.46 2 1525 48.5 32.4 9.80 3.88
2* 960 46.0 29.6 9.00 3.18
1 965 34.4 – – 3.44 2 1525 48.0 32.6 9.75 3.80
2* 965 46.5 29.8 9.00 3.18
1 980 33.4 – – 3.26 2 1550 47.5 31.8 9.65 3.64
2* 980 46.0 29.0 8.95 3.08
1 1120 34.4 – – 3.38 2 1565 48.5 33.0 9.55 3.68
2* 1120 46.5 30.0 9.05 3.22
HEATING
2
NET MBH
47°F OD 17°F OD
3
HSPF COP @ 47°F
44 Johnson Controls Unitary Products
Page 45
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH04812C
For notes, see Page 52.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
Y*LC*C16 FC/MC/PC48D
Y*LC*C16 FC/MC/PC60D
Y*LC*C16 FC/MC62D
Y*LC*C16 FC/PC60C
Y*LC*C16 FC64D
Y*LC*C16 UC48C
Y*LC*C16 UC60C
Y*LC*C20 FC/MC/PC48C
Y*LC*C20 FC/MC/PC48D
Y*LC*C20 FC/MC/PC60D
Y*LC*C20 FC/MC62D
Y*LC*C20 FC/PC60C
Y*LC*C20 FC64D
Y*LC*C20 UC48C
Y*LC*C20 UC60C
Y*9C*C16 FC/MC/PC48C
Y*9C*C16 FC/MC/PC48D
COIL
MODEL
1
STAGE
RATED
CFM
1 1120 34.4 – – 3.38 2 1565 48.5 33.0 9.55 3.68
2* 1120 46.5 30.0 9.05 3.22
1 1025 34.2 – – 3.28 2 1600 48.0 32.6 9.60 3.70
2* 1025 46.0 29.6 9.10 3.08
1 1025 34.0 – – 3.38 2 1635 48.5 32.2 9.80 3.86
2* 1025 46.0 29.0 9.25 3.16
1 1025 34.2 – – 3.28 2 1600 48.0 32.6 9.60 3.70
2* 1025 46.0 29.6 9.10 3.08
1 1025 34.6 – – 3.54 2 1635 48.5 32.6 9.90 3.96
2* 1025 47.0 29.8 9.45 3.34
1 1035 34.8 – – 3.46 2 1615 48.5 32.6 9.75 3.84
2* 1035 47.0 29.8 9.40 3.26
1 1035 33.6 – – 3.24 2 1625 48.0 32.0 9.65 3.72
2* 1035 46.0 29.2 9.25 3.08
1 1080 34.0 – – 3.32 2 1640 48.5 32.8 9.70 3.76
2* 1080 46.0 29.8 9.20 3.12
1 1080 34.0 – – 3.32 2 1640 48.5 32.8 9.70 3.76
2* 1080 46.0 29.8 9.20 3.12
1 1060 34.2 – – 3.28 2 1625 48.0 32.6 9.65 3.72
2* 1060 46.0 29.6 9.10 3.08
1 1060 34.2 – – 3.40 2 1620 48.0 32.2 9.85 3.88
2* 1060 46.0 29.2 9.20 3.22
1 1060 34.2 – – 3.28 2 1625 48.0 32.6 9.65 3.72
2* 1060 46.0 29.6 9.10 3.08
1 1060 34.8 – – 3.52 2 1630 48.5 32.4 9.95 4.00
2* 1060 47.0 29.8 9.40 3.34
1 1080 35.0 – – 3.48 2 1640 48.5 32.6 9.75 3.84
2* 1080 47.0 30.0 9.30 3.30
1 1015 33.6 – – 3.22 2 1605 48.0 31.8 9.75 3.74
2* 1015 46.0 29.0 9.35 3.04
1 1050 34.0 – – 3.30 2 1590 48.5 32.8 9.65 3.74
2* 1050 46.5 29.8 9.05 3.10
1 1050 34.0 – – 3.30 2 1590 48.5 32.8 9.65 3.74
2* 1050 46.5 29.8 9.05 3.10
HEATING
2
NET MBH
47°F OD 17°F OD
3
1109431-YTG-A-0714
HSPF COP @ 47°F
Johnson Controls Unitary Products 45
Page 46
1109431-YTG-A-0714
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH04812C
For notes, see Page 52.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
Y*9C*C16 FC/MC/PC60D
Y*9C*C16 FC/MC62D
Y*9C*C16 FC/PC60C
Y*9C*C16 FC64D
Y*9C*C16 UC48C
Y*9C*C16 UC60C
Y*9C*C20 FC/MC/PC48C
Y*9C*C20 FC/MC/PC48D
Y*9C*C20 FC/MC/PC60D
Y*9C*C20 FC/MC62D
Y*9C*C20 FC/PC60C
Y*9C*C20 FC64D
Y*9C*C20 UC48C
Y*9C*C20 UC60C
Y*9C*D20 FC/MC/PC48D
Y*9C*D20 FC/MC/PC60D
Y*9C*D20 FC/MC62D
COIL
MODEL
1
STAGE
RATED
CFM
1 1050 34.4 – – 3.28 2 1590 48.0 32.8 9.60 3.68
2* 1050 46.0 29.6 9.05 3.06
1 1040 34.2 – – 3.38 2 1590 48.5 32.4 9.75 3.80
2* 1040 46.0 29.2 9.15 3.18
1 1050 34.4 – – 3.28 2 1590 48.0 32.8 9.60 3.68
2* 1050 46.0 29.6 9.05 3.06
1 1040 34.8 – – 3.52 2 1590 49.0 32.6 9.85 3.94
2* 1040 47.0 30.0 9.35 3.32
1 1050 34.8 – – 3.42 2 1590 48.5 32.8 9.65 3.74
2* 1050 46.5 30.0 9.20 3.22
1 1050 33.8 – – 3.18 2 1590 48.0 32.0 9.55 3.60
2* 1050 46.0 29.2 9.05 3.02
1 1055 34.0 – – 3.32 2 1655 48.5 32.8 9.65 3.74
2* 1055 46.0 29.8 9.15 3.12
1 1055 34.0 – – 3.32 2 1655 48.5 32.8 9.65 3.74
2* 1055 46.0 29.8 9.15 3.12
1 1055 34.2 – – 3.28 2 1655 48.0 32.8 9.60 3.68
2* 1055 46.0 29.6 9.10 3.08
1 1040 34.0 – – 3.38 2 1655 48.5 32.6 9.65 3.80
2* 1040 46.5 29.2 9.20 3.18
1 1055 34.2 – – 3.28 2 1655 48.0 32.8 9.60 3.68
2* 1055 46.0 29.6 9.10 3.08
1 1040 34.8 – – 3.52 2 1655 49.0 32.8 9.75 3.90
2* 1040 47.0 30.0 9.35 3.32
1 1055 35.0 – – 3.46 2 1655 48.5 32.6 9.70 3.84
2* 1055 47.0 30.0 9.35 3.28
1 1055 34.0 – – 3.24 2 1655 48.0 32.2 9.60 3.70
2* 1055 46.5 29.0 9.15 3.08
1 1060 34.0 – – 3.30 2 1645 48.5 32.8 9.65 3.74
2* 1060 46.0 29.8 9.10 3.10
1 1070 34.4 – – 3.28 2 1615 48.0 32.6 9.65 3.70
2* 1070 46.0 29.6 9.10 3.06
1 1085 34.2 – – 3.42 2 1630 48.5 32.4 9.75 3.82
2* 1085 46.5 29.4 9.10 3.24
HEATING
2
NET MBH
47°F OD 17°F OD
3
HSPF COP @ 47°F
46 Johnson Controls Unitary Products
Page 47
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH04812C
YZH06012C
For notes, see Page 52.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
Y*9C*D20 FC64D
Y*9C*D20 UC48D
Y*9C*D20 UC60D
T*(8,L)V*C16 FC/PC60C
T*(8,L)V*C20 FC/MC/PC60D
T*(8,L)V*C20 FC/MC62D
T*(8,L)V*C20 FC/PC60C
T*(8,L)V*C20 FC64D
T*(8,L)V*C20 UC60C
T*9V*C20 FC/MC/PC60D
T*9V*C20 FC/MC62D
T*9V*C20 FC/PC60C
T*9V*C20 FC64D
T*9V*C20 UC60C
T*9V*D20 FC/MC/PC60D
T*9V*D20 FC/MC62D
T*9V*D20 FC64D
COIL
MODEL
1
STAGE
RATED
CFM
1 1085 34.8 – – 3.50 2 1630 49.0 32.6 9.80 3.94
2* 1085 47.0 30.0 9.30 3.32
1 1060 35.0 – – 3.46 2 1645 48.5 32.6 9.70 3.84
2* 1060 47.0 30.2 9.35 3.28
1 1070 33.8 – – 3.26 2 1615 48.0 32.0 9.65 3.70
2* 1070 46.5 29.0 9.15 3.10
1 1025 41.0 – – 2.92 2 1600 57.5 38.5 9.15 3.48
2* 1025 58.0 37.6 8.75 2.68
1 1060 41.0 – – 3.00 2 1600 57.0 38.5 9.25 3.52
2* 1060 58.0 37.6 8.85 2.74
1 1015 40.5 – – 3.00 2 1600 57.5 38.0 9.20 3.58
2* 1015 58.5 37.2 8.85 2.78
1 1060 41.0 – – 3.00 2 1600 57.0 38.5 9.25 3.52
2* 1060 58.0 37.6 8.85 2.74
1 1060 41.5 – – 3.16 2 1855 59.0 38.5 9.30 3.82
2* 1060 59.0 38.1 9.05 2.94
1 1015 40.0 – – 2.88 2 1605 57.0 38.0 9.25 3.52
2* 1015 58.0 37.2 8.95 2.68
1 1055 41.0 – – 2.96 2 1655 57.5 38.5 9.15 3.50
2* 1055 58.0 37.6 8.75 2.72
1 1040 41.0 – – 3.04 2 1655 58.0 38.5 9.20 3.62
2* 1040 58.5 37.2 8.85 2.82
1 1055 41.0 – – 2.96 2 1655 57.5 38.5 9.15 3.50
2* 1055 58.0 37.6 8.75 2.72
1 1040 41.5 – – 3.12 2 1655 58.0 38.5 9.25 3.72
2* 1040 59.0 37.6 8.95 2.88
1 1055 40.5 – – 2.92 2 1655 57.5 38.5 9.15 3.50
2* 1055 58.5 37.4 8.80 2.72
1 1070 41.0 – – 2.98 2 1615 57.0 38.5 9.15 3.50
2* 1070 58.5 37.6 8.75 2.74
1 1085 41.0 – – 3.08 2 1630 57.5 38.0 9.25 3.62
2* 1085 59.0 37.2 8.85 2.88
1 1085 41.5 – – 3.18 2 1630 58.0 38.5 9.30 3.72
2* 1085 59.0 37.6 8.90 2.94
HEATING
2
NET MBH
47°F OD 17°F OD
3
1109431-YTG-A-0714
HSPF COP @ 47°F
Johnson Controls Unitary Products 47
Page 48
1109431-YTG-A-0714
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH06012C
For notes, see Page 52.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
T*9V*D20 UC60D
TM8X080C16MP11 FC/MC/PC60D
TM8X080C16MP11 FC/MC62D
TM8X080C16MP11 FC/PC60C
TM8X080C16MP11 FC64D
TM8X080C16MP11 UC60C
TM8X080C16MP11 UC60D
TM8X100C16MP11 FC/MC/PC60D
TM8X100C16MP11 FC/MC62D
TM8X100C16MP11 FC/PC60C
TM8X100C16MP11 FC64D
TM8X100C16MP11 UC60C
TM8X100C16MP11 UC60D
TM8X100C20MP11 FC/MC/PC60D
TM8X100C20MP11 FC/MC62D
TM8X100C20MP11 FC/PC60C
TM8X100C20MP11 UC60C
COIL
MODEL
1
STAGE
RATED
CFM
1 1070 40.5 – – 2.92 2 1615 57.0 38.0 9.15 3.48
2* 1070 58.5 37.4 8.75 2.74
1 1045 40.5 – – 2.98 2 1550 57.0 38.5 9.15 3.44
2* 1045 58.0 37.4 9.00 2.74
1 1040 40.5 – – 3.06 2 1550 57.5 38.0 9.20 3.56
2* 1040 58.5 37.0 9.10 2.84
1 1020 40.5 – – 2.94 2 1525 57.0 38.5 9.10 3.42
2* 1020 58.0 37.4 8.95 2.70
1 1045 41.0 – – 3.18 2 1550 57.5 38.5 9.30 3.66
2* 1045 58.0 37.2 9.05 2.92
1 1020 40.5 – – 2.90 2 1525 57.0 38.0 9.10 3.40
2* 1020 58.0 37.0 8.95 2.68
1 1045 40.0 – – 2.90 2 1550 57.0 38.0 9.15 3.42
2* 1045 58.0 37.0 9.00 2.68
1 1045 40.5 – – 2.98 2 1550 57.0 38.5 9.15 3.44
2* 1045 58.0 37.4 9.00 2.74
1 1040 40.5 – – 3.06 2 1550 57.5 38.0 9.20 3.56
2* 1040 58.5 37.0 9.10 2.84
1 1020 40.5 – – 2.94 2 1525 57.0 38.5 9.10 3.42
2* 1020 58.0 37.4 8.95 2.70
1 1045 41.0 – – 3.18 2 1550 57.5 38.5 9.30 3.66
2* 1045 58.0 37.2 9.05 2.92
1 1020 40.5 – – 2.90 2 1525 57.0 38.0 9.10 3.40
2* 1020 58.0 37.0 8.95 2.68
1 1045 40.0 – – 2.90 2 1550 57.0 38.0 9.15 3.42
2* 1045 58.0 37.0 9.00 2.68
1 1105 41.0 – – 3.04 2 1575 57.0 38.5 9.20 3.48
2* 1105 58.0 37.6 8.95 2.80
1 1100 40.5 – – 3.12 2 1575 57.5 38.0 9.30 3.60
2* 1100 58.5 36.8 8.95 2.92
1 1085 41.0 – – 3.02 2 1550 57.0 38.5 9.20 3.46
2* 1085 58.0 37.6 8.90 2.76
1 1085 40.5 – – 2.98 2 1550 57.0 38.0 9.20 3.46
2* 1085 58.5 37.0 8.90 2.76
HEATING
2
NET MBH
47°F OD 17°F OD
3
HSPF COP @ 47°F
48 Johnson Controls Unitary Products
Page 49
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH06012C
For notes, see Page 52.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
TM8X100C20MP11 UC60D
TM8X120C20MP11 FC/MC/PC60D
TM8X120C20MP11 FC/MC62D
TM8X120C20MP11 FC/PC60C
TM8X120C20MP11 UC60C
TM8X120C20MP11 UC60D
TMLX080C16MP11 FC/MC/PC60D
TMLX080C16MP11 FC/MC62D
TMLX080C16MP11 FC/PC60C
TMLX080C16MP11 FC64D
TMLX080C16MP11 UC60C
TMLX080C16MP11 UC60D
TMLX100C16MP11 FC/MC/PC60D
TMLX100C16MP11 FC/MC62D
TMLX100C16MP11 FC/PC60C
TMLX100C16MP11 FC64D
TMLX100C16MP11 UC60C
COIL
MODEL
1
STAGE
RATED
CFM
1 1105 40.5 – – 3.00 2 1575 57.0 38.0 9.20 3.48
2* 1105 58.5 37.2 8.95 2.78
1 1105 41.0 – – 3.04 2 1575 57.0 38.5 9.20 3.48
2* 1105 58.0 37.6 8.95 2.80
1 1100 40.5 – – 3.12 2 1575 57.5 38.0 9.30 3.60
2* 1100 58.5 36.8 8.95 2.92
1 1085 41.0 – – 3.02 2 1550 57.0 38.5 9.20 3.46
2* 1085 58.0 37.6 8.90 2.76
1 1085 40.5 – – 2.98 2 1550 57.0 38.0 9.20 3.46
2* 1085 58.5 37.0 8.90 2.76
1 1105 40.5 – – 3.00 2 1575 57.0 38.0 9.20 3.48
2* 1105 58.5 37.2 8.95 2.78
1 1045 40.5 – – 2.98 2 1550 57.0 38.5 9.15 3.44
2* 1045 58.0 37.4 9.00 2.74
1 1040 40.5 – – 3.06 2 1550 57.5 38.0 9.20 3.56
2* 1040 58.5 37.0 9.10 2.84
1 1020 40.5 – – 2.94 2 1525 57.0 38.5 9.10 3.42
2* 1020 58.0 37.4 8.95 2.70
1 1045 41.0 – – 3.18 2 1550 57.5 38.5 9.30 3.66
2* 1045 58.0 37.2 9.05 2.92
1 1020 40.5 – – 2.90 2 1525 57.0 38.0 9.10 3.40
2* 1020 58.0 37.0 8.95 2.68
1 1045 40.0 – – 2.90 2 1550 57.0 38.0 9.15 3.42
2* 1045 58.0 37.0 9.00 2.68
1 1045 40.5 – – 2.98 2 1550 57.0 38.5 9.15 3.44
2* 1045 58.0 37.4 9.00 2.74
1 1040 40.5 – – 3.06 2 1550 57.5 38.0 9.20 3.56
2* 1040 58.5 37.0 9.10 2.84
1 1020 40.5 – – 2.94 2 1525 57.0 38.5 9.10 3.42
2* 1020 58.0 37.4 8.95 2.70
1 1045 41.0 – – 3.18 2 1550 57.5 38.5 9.30 3.66
2* 1045 58.0 37.2 9.05 2.92
1 1020 40.5 – – 2.90 2 1525 57.0 38.0 9.10 3.40
2* 1020 58.0 37.0 8.95 2.68
HEATING
2
NET MBH
47°F OD 17°F OD
3
1109431-YTG-A-0714
HSPF COP @ 47°F
Johnson Controls Unitary Products 49
Page 50
1109431-YTG-A-0714
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH06012C
For notes, see Page 52.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
TMLX100C16MP11 UC60D
TMLX100C20MP11 FC/MC/PC60D
TMLX100C20MP11 FC/MC62D
TMLX100C20MP11 FC/PC60C
TMLX100C20MP11 UC60C
TMLX100C20MP11 UC60D
TMLX120C20MP11 FC/MC/PC60D
TMLX120C20MP11 FC/MC62D
TMLX120C20MP11 FC/PC60C
TMLX120C20MP11 UC60C
TMLX120C20MP11 UC60D
TM9E100C20MP11 FC/MC/PC60D
TM9E100C20MP11 FC/MC62D
TM9E100C20MP11 FC64D
TM9E100C20MP11 UC60D
TM9E120D20MP11 FC/MC/PC60D
TM9E120D20MP11 FC/MC62D
COIL
MODEL
1
STAGE
RATED
CFM
1 1045 40.0 – – 2.90 2 1550 57.0 38.0 9.15 3.42
2* 1045 58.0 37.0 9.00 2.68
1 1105 41.0 – – 3.04 2 1575 57.0 38.5 9.20 3.48
2* 1105 58.0 37.6 8.95 2.80
1 1100 40.5 – – 3.12 2 1575 57.5 38.0 9.30 3.60
2* 1100 58.5 36.8 8.95 2.92
1 1085 41.0 – – 3.02 2 1550 57.0 38.5 9.20 3.46
2* 1085 58.0 37.6 8.90 2.76
1 1085 40.5 – – 2.98 2 1550 57.0 38.0 9.20 3.46
2* 1085 58.5 37.0 8.90 2.76
1 1105 40.5 – – 3.00 2 1575 57.0 38.0 9.20 3.48
2* 1105 58.5 37.2 8.95 2.78
1 1105 41.0 – – 3.04 2 1575 57.0 38.5 9.20 3.48
2* 1105 58.0 37.6 8.95 2.80
1 1100 40.5 – – 3.12 2 1575 57.5 38.0 9.30 3.60
2* 1100 58.5 36.8 8.95 2.92
1 1085 41.0 – – 3.02 2 1550 57.0 38.5 9.20 3.46
2* 1085 58.0 37.6 8.90 2.76
1 1085 40.5 – – 2.98 2 1550 57.0 38.0 9.20 3.46
2* 1085 58.5 37.0 8.90 2.76
1 1105 40.5 – – 3.00 2 1575 57.0 38.0 9.20 3.48
2* 1105 58.5 37.2 8.95 2.78
1 960 40.5 – – 2.88 2 1525 57.0 38.5 9.10 3.42
2* 960 57.5 37.6 9.00 2.62
1 985 40.5 – – 3.00 2 1550 57.5 38.0 9.25 3.56
2* 985 58.0 36.8 9.15 2.76
1 980 41.0 – – 3.10 2 1550 57.5 38.5 9.30 3.66
2* 980 58.5 37.4 9.25 2.82
1 960 40.0 – – 2.82 2 1525 57.0 38.0 9.10 3.42
2* 960 57.5 37.2 9.00 2.62
1 980 40.5 – – 2.90 2 1550 57.0 38.5 9.20 3.46
2* 980 57.5 37.6 9.05 2.66
1 980 40.5 – – 3.00 2 1550 57.5 38.0 9.25 3.58
2* 980 58.0 36.8 9.15 2.76
HEATING
2
NET MBH
47°F OD 17°F OD
3
HSPF COP @ 47°F
50 Johnson Controls Unitary Products
Page 51
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH06012C
For notes, see Page 52.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
TM9E120D20MP11 FC64D
TM9E120D20MP11 UC60D
TM9X100C20MP11 FC/MC/PC60D
TM9X100C20MP11 FC/MC62D
TM9X100C20MP11 FC64D
TM9X100C20MP11 UC60D
TM9X120D20MP11 FC/MC/PC60D
TM9X120D20MP11 FC/MC62D
TM9X120D20MP11 FC64D
TM9X120D20MP11 UC60D
Y*LC*C16 FC/PC60C
Y*LC*C20 FC/MC/PC60D
Y*LC*C20 FC/MC62D
Y*LC*C20 FC/PC60C
Y*LC*C20 FC64D
Y*LC*C20 UC60C
Y*9C*C20 FC/MC/PC60D
COIL
MODEL
1
STAGE
RATED
CFM
1 960 41.0 – – 3.06 2 1525 57.5 38.0 9.30 3.66
2* 960 58.5 37.4 9.25 2.78
1 980 40.0 – – 2.90 2 1550 57.0 38.0 9.15 3.42
2* 980 58.0 36.8 9.10 2.70
1 960 40.5 – – 2.88 2 1525 57.0 38.5 9.10 3.42
2* 960 57.5 37.6 9.00 2.62
1 985 40.5 – – 3.00 2 1550 57.5 38.0 9.25 3.56
2* 985 58.0 36.8 9.15 2.76
1 980 41.0 – – 3.10 2 1550 57.5 38.5 9.30 3.66
2* 980 58.5 37.4 9.25 2.82
1 960 40.0 – – 2.82 2 1525 57.0 38.0 9.10 3.42
2* 960 57.5 37.2 9.00 2.62
1 980 40.5 – – 2.90 2 1550 57.0 38.5 9.20 3.46
2* 980 57.5 37.6 9.05 2.66
1 980 40.5 – – 3.00 2 1550 57.5 38.0 9.25 3.58
2* 980 58.0 36.8 9.15 2.76
1 960 41.0 – – 3.06 2 1525 57.5 38.0 9.30 3.66
2* 960 58.5 37.4 9.25 2.78
1 980 40.0 – – 2.90 2 1550 57.0 38.0 9.15 3.42
2* 980 58.0 36.8 9.10 2.70
1 1025 41.0 – – 2.92 2 1600 57.5 38.5 9.15 3.48
2* 1025 58.0 37.6 8.75 2.68
1 1060 41.0 – – 3.00 2 1600 57.0 38.5 9.25 3.52
2* 1060 58.0 37.6 8.85 2.74
1 1015 40.5 – – 3.00 2 1600 57.5 38.0 9.20 3.58
2* 1015 58.5 37.2 8.85 2.78
1 1060 41.0 – – 3.00 2 1600 57.0 38.5 9.25 3.52
2* 1060 58.0 37.6 8.85 2.74
1 1060 41.5 – – 3.16 2 1855 59.0 38.5 9.30 3.82
2* 1060 59.0 38.1 9.05 2.94
1 1015 40.0 – – 2.88 2 1605 57.0 38.0 9.25 3.52
2* 1015 58.0 37.2 8.95 2.68
1 1055 41.0 – – 2.96 2 1655 57.5 38.5 9.15 3.50
2* 1055 58.0 37.6 8.75 2.72
HEATING
2
NET MBH
47°F OD 17°F OD
3
1109431-YTG-A-0714
HSPF COP @ 47°F
Johnson Controls Unitary Products 51
Page 52
1109431-YTG-A-0714
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YZH06012C
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.
2. Heating MBH based on AHRI standards of 70°F DB (Dry Bulb) entering indoor air, 72% RH (Relative Humidity) outdoor air with 25 feet of interconnecting pip­ing and no supplemental electric heat operation.
3. High Efficiency Motor Furnaces have B.O.D (Blower on Delay) standard. * Notates “Hot Heat Pump” performance. These ratings are not AHRI listed.
COP equals MBH output divided by (total KW input x 3.412). HSPF (Heating Seasonal Performance Factor) is the t otal he ating output during a normal annual usage period fo r heating divided by th e tota l electric power input
during the same period. — = Not Applicable. PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings.
FURNACE
MODEL
18 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
Y*9C*C20 FC/MC62D
Y*9C*C20 FC/PC60C
Y*9C*C20 FC64D
Y*9C*C20 UC60C
Y*9C*D20 FC/MC/PC60D
Y*9C*D20 FC/MC62D
Y*9C*D20 FC64D
Y*9C*D20 UC60D
COIL
MODEL
1
STAGE
1 1040 41.0 – – 3.04 2 1655 58.0 38.5 9.20 3.62
2* 1040 58.5 37.2 8.85 2.82
1 1055 41.0 – – 2.96 2 1655 57.5 38.5 9.15 3.50
2* 1055 58.0 37.6 8.75 2.72
1 1040 41.5 – – 3.12 2 1655 58.0 38.5 9.25 3.72
2* 1040 59.0 37.6 8.95 2.88
1 1055 40.5 – – 2.92 2 1655 57.5 38.5 9.15 3.50
2* 1055 58.5 37.4 8.80 2.72
1 1070 41.0 – – 2.98 2 1615 57.0 38.5 9.15 3.50
2* 1070 58.5 37.6 8.75 2.74
1 1085 41.0 – – 3.08 2 1630 57.5 38.0 9.25 3.62
2* 1085 59.0 37.2 8.85 2.88
1 1085 41.5 – – 3.18 2 1630 58.0 38.5 9.30 3.72
2* 1085 59.0 37.6 8.90 2.94
1 1070 40.5 – – 2.92 2 1615 57.0 38.0 9.15 3.48
2* 1070 58.5 37.4 8.75 2.74
RATED
CFM
HEATING
NET MBH
47°F OD 17°F OD
2
HSPF COP @ 47°F
3
ACCESSORIES & APPLICATIONS
Refer to Price Manual for specific model numbers.
TXV Kits - S1-1TVM series thermal expansion valves precisely meter refrigerant for optimum performance over a wide range of conditions. See System Charge table for TXV part number for
Application Limits
Maximum Lineset Equivalent Length 75 Ft Outdoor Ambient Temperature Limits
Cooling Operation
Heating Operation
Maximum DB 115°F
Minimum DB 50°F
Maximum DB 75°F
Minimum DB -10°F
Long Lineset Applications - For installations with more than 75' of equivalent lineset length, refer to the current version of the Piping Application Guide 247077-UAD-H-0209, availabl e in the Application Bulletins section on UPGnet.
Start Assist Kit (S1-2SA067*) - Provides increased starting torque for areas with low voltage. See Hard Start Kit Accessory Installation Manual for Hard Start Kit part number for each model.
each model. Bonnet Sensor (S1-2SB13700124) - The bonnet sensor is
used to sense plenum temperature, and is optional with a gas or oil back-up heat source. Compatible only with 13 SEER and higher heat pumps.
Dehumidistat (S1-2HU16700124) - Provides increased dehu­midification when matched with variable speed furnace or air handler.
Heat Pump Risers - (S1-52635389000, S1-52635390000, S1-52635391000) - 3", 6", or 12" risers mount easily in compos­ite base pan recesses, ensuring the unit stays clear of snow and ice build-up in harsh winter weather.
Thermostats - Compatible thermostat controls are available through accessory sourcing. For optimum performance, these outdoor units are fully compatible with the Residential Touch­screen Communicating Control (Zoning and Non-Zoning ver­sions). For more information, see the Residential Control Systems section of the Product Equipment Catalog.
52 Johnson Controls Unitary Products
Page 53
1109431-YTG-A-0714
THERMOSTAT
NEC CLASS 1
WIRING
TO INDOOR BLOWER
NEC CLASS 2 WIRING
TO COIL
WEATHERPROOF
DISCONNECT
SWITCH
24” SERVICE
ACCESS
CLEARANCE
ALL OUTDOOR WIRING MUST BE WEATHERPROOF MINIMUM 24” UNIT TO UNIT CLEARANCE
SEAL OPENINGS WITH PERMAGUM OR EQUIVALENT
60” OVERHEAD CLEARANCE
10” CLEARANCE AROUND PERIMETER
NOTES:
SOUND POWER RATINGS
Stage 1 - Cooling Octave Band Sound Power Level (db re. 1-pW)
Model Number 63 125 250 500 1000 2000 4000 8000 dBA SQI
YZH02412C 69 75 70 69 63 56 50 45 69 19 YZH03612C 68 76 69 70 64 57 51 46 70 19 YZH04812C 68 76 70 69 64 58 53 48 70 19 YZH06012C 70 82 69 72 66 60 54 49 72 19
Stage 2 - Cooling Octave Band Sound Power Level (db re. 1-pW)
Model Number 63 125 250 500 1000 2000 4000 8000 dBA SQI
YZH02412C 68 73 70 68 62 56 50 47 68 19 YZH03612C 68 75 71 71 65 58 52 50 71 19 YZH04812C 67 77 69 69 64 58 53 49 70 19 YZH06012C 69 85 69 70 66 60 54 50 73 19
Stage 1 - Heating Octave Band Sound Power Level (db re. 1-pW)
Model Number 63 125 250 500 1000 2000 4000 8000 dBA SQI
YZH02412C 68 72 68 69 61 56 51 47 68 19 YZH03612C 70 75 70 69 65 58 53 50 70 19 YZH04812C 69 73 71 68 64 58 53 51 69 19 YZH06012C 72 76 70 75 66 59 55 52 73 19
Stage 2 - Heating Octave Band Sound Power Level (db re. 1-pW)
Model Number 63 125 250 500 1000 2000 4000 8000 dBA SQI
YZH02412C 68 72 69 68 61 56 51 48 68 19 YZH03612C 68 76 71 69 65 58 53 51 71 19 YZH04812C 69 75 73 69 65 59 54 51 70 19 YZH06012C 71 79 69 74 66 60 56 53 73 19
Rated in accordance with ARI Standard 270-1995.
TYPICAL INSTALLATION
Johnson Controls Unitary Products 53
Page 54
1109431-YTG-A-0714
COOLING PERFORMANCE DATA - LOW CFM 1-STAGE OPERATION
OUTDOOR UNIT MODEL NO. YZH02412C INDOOR COIL MODEL NO. FC/MC48D + MV12D
AIR TEMP.
ENTERING
OUTDOOR UNIT (°F)
65
75
85
95
105
115
125
NOTE: ALL CAPACI TIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
ID CFM 550 600 650
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
T.C. 17.7 18.5 19.0 20.5 22.9 18.3 19.0 19.4 21.1 23.4 19.0 19.5 19.8 21.6 23.8 S.C. 17.0 16.2 14.3 14.1 11.6 17.7 17.1 14.9 14.8 11.9 18.5 18.0 15.4 15.5 12.3
K.W. 0.81 0.80 0.80 0.79 0.76 0.80 0.79 0.79 0.77 0.75 0.79 0.77 0.79 0.76 0.74
T.C. 17.0 17.7 18.0 19.7 21.8 17.6 18.2 18.4 20.2 22.2 18.2 18.7 18.8 20.6 22.6 S.C. 16.3 15.8 13.9 13.6 11.0 17.0 16.6 14.5 14.3 11.5 17.7 17.5 15.1 15.0 11.9
K.W. 0.97 0.97 0.97 0.95 0.92 0.96 0.95 0.96 0.94 0.91 0.95 0.94 0.95 0.93 0.90
T.C. 16.3 16.8 16.9 18.8 20.8 16.8 17.4 17.4 19.2 21.1 17.4 17.9 17.8 19.6 21.4 S.C. 15.7 15.3 13.4 13.1 10.5 16.3 16.1 14.1 13.8 11.0 17.0 16.9 14.8 14.5 11.5
K.W. 1.13 1.14 1.14 1.11 1.09 1.12 1.12 1.13 1.10 1. 07 1.11 1.11 1.12 1.09 1.06
T.C. 15.6 16.0 15.9 18.0 19.7 16.1 16.5 16.4 18.3 20.0 16.5 17.1 16.8 18.6 20.2 S.C. 15.0 14.8 12.9 12.6 10.0 15.6 15.6 13.7 13.4 10.5 16.2 16.3 14.4 14.1 11.1
K.W. 1.29 1.30 1.30 1.27 1.25 1.28 1.29 1.29 1.26 1.24 1.27 1.27 1.29 1.26 1.22
T.C. 14.6 15.1 14.8 16.6 18.3 15.1 15.6 15.2 17.0 18.6 15.6 16.1 15.7 17.4 18.9 S.C. 14.1 14.1 12.3 12.1 9.6 14.7 14.7 13.1 12.8 10.1 15.3 15.2 13.8 13.6 10.6
K.W. 1.53 1.53 1.54 1.51 1.49 1.52 1.52 1.53 1.50 1.48 1.51 1.51 1.52 1.50 1.47
T.C. 13.7 14.2 13.7 15.3 16.9 14.2 14.7 14.1 15.8 17.3 14.6 15.1 14.5 16.2 17.6 S.C. 13.3 13.5 11.8 11.6 9.2 13.9 13.8 12.5 12.3 9.7 14.5 14.1 13.1 13.1 10.2
K.W. 1.76 1.76 1.77 1.74 1.72 1.75 1.74 1.75 1.74 1.71 1.74 1.74 1.75 1.73 1.70
T.C. 12.8 13.4 12.6 14.1 15.6 13.3 13.8 13.0 14.5 15.9 13.7 14.2 13.4 14.9 16.3 S.C. 12.5 12.8 11.2 11.1 8.9 13.0 12.9 11.9 11.9 9.3 13.6 13.0 12.5 12.6 9.7
K.W. 1.99 1.98 1.99 1.98 1.96 1.98 1.97 1.98 1.97 1.95 1.96 1.96 1.98 1.96 1.94
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
LOW CFM
Air Handler Coil T.C. S.C. KW
– FC/MC/PC48 0.96 0.96 1.03 AHV24B – 0.96 0.96 1.08 AHV30B – 0.97 0.98 1.08 AHV36C – 0.98 0.99 1.05 MV12B FC/MC43B 1.00 1.01 1.02 MV12D FC/MC48D 1.00 1.00 1.00 MV12D FC/MC60D 1.00 1.01 1.00
Continued on next page.
54 Johnson Controls Unitary Products
Page 55
1109431-YTG-A-0714
Furnace Coil T.C. S.C. KW
T*(8,L)V*A12 FC/MC/PC37A 1.00 1.00 1.03 T*(8,L)V*B12 FC/MC/PC43B 0.98 0.99 1.05 T*(8,L)V*C16 FC/MC/PC43C 1.01 1.01 1.02 T*9V*A10 FC/MC/PC37A 0.98 0.99 1.04 T*9V*B12 FC/MC/PC43B 0.99 1.00 1.04 T*9V*C16 FC/MC/PC4 8C 1.01 1.01 1.00 T*9V*C16 FC/PC60C 1.00 1.01 1.00 T*9V*C16 UC48C 1.03 1.04 0.98 T*9V*C16 UC60C 1.00 1.01 1.00 T*9V*C20 FC/MC/PC4 3C 1.01 1.01 1.02 T*9V*C20 FC/MC/PC4 8C 1.01 1.01 1.00 T*9V*C20 UC48C 1.03 1.04 0.98 TM8X080C16MP11 FC/MC/PC43C 1.00 1.01 1.02 TM8X080C16MP11 FC/MC/PC48C 1.00 1.01 1.00 TM8X080C16MP11 FC/PC60C 1.00 1.01 1.00 TM8X080C16MP11 U C48C 1.02 1.02 0.99 TM8X080C16MP11 U C60C 1.00 1.01 1.00 TM8X100C16MP11 FC/MC/PC43C 1.00 1.01 1.02 TM8X100C16MP11 FC/MC/PC48C 1.00 1.01 1.00 TM8X100C16MP11 FC/PC60C 1.00 1.01 1.00 TM8X100C16MP11 U C48C 1.02 1.02 0.99 TM8X100C16MP11 U C60C 1.00 1.01 1.00 TMLX080C16MP11 FC/MC/PC43C 1.00 1.01 1.02
Furnace Coil T.C. S.C. KW
TMLX080C16MP11 FC/MC/PC48C 1.00 1.01 1.00 TMLX080C16MP11 FC/PC60C 1.00 1.01 1.00 TMLX080C16MP11 UC48C 1.02 1.02 0.99 TMLX080C16MP11 UC60C 1.00 1.01 1.00 TMLX100C16MP11 FC/MC/PC43C 1.00 1.01 1.02 TMLX100C16MP11 FC/MC/PC48C 1.00 1.01 1.00 TMLX100C16MP11 FC/PC60C 1.00 1.01 1.00 TMLX100C16MP11 UC48C 1.02 1.02 0.99 TMLX100C16MP11 UC60C 1.00 1.01 1.00 Y*LC*A12 FC/MC/PC37A 1.00 1.00 1.03 Y*LC*B12 FC/MC/PC43B 0.98 0.99 1.05 Y*LC*C16 FC/MC/PC43C 1.01 1.01 1.02 Y*9C*B12 FC/MC/PC43B 0.99 1.00 1.04 Y*9C*C16 FC/MC/PC48C 1.01 1.01 1.00 Y*9C*C16 FC/PC60C 1.00 1.01 1.00 Y*9C*C16 UC48C 1.03 1.04 0.98 Y*9C*C16 UC60C 1.00 1.01 1.00 Y*9C*C20 FC/MC/PC43C 1.01 1.01 1.02 Y*9C*C20 FC/MC/PC48C 1.01 1.01 1.00 Y*9C*C20 UC48C 1.03 1.04 0.98
Johnson Controls Unitary Products 55
Page 56
1109431-YTG-A-0714
COOLING PERFORMANCE DATA - HIGH CFM 2-STAGE OPERATION
OUTDOOR UNIT MODEL NO. YZH02412C INDOOR COIL MODEL NO. FC/MC48D + MV12D
AIR TEMP.
ENTERING
OUTDOOR UNIT (°F)
65
75
85
95
105
115
125
NOTE: ALL CAPACI TIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
HIGH CFM
Air Handler Coil T.C. S.C. KW
– FC/MC/PC48 0.95 0.91 1.13 AHV24B – 0.94 0.87 1.01 AHV30B – 0.95 0.90 1.02 AHV36C – 0.96 0.91 0.99 MV12B FC/MC43B 0.98 0.93 1.01 MV12D FC/MC48D 1.00 1.00 1.00 MV12D FC/MC60D 0.99 0.96 0.99
Continued on next page.
ID CFM 800 900 1000
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
T.C. 24.7 23.9 24.3 26.6 29.3 25.0 24.7 25.1 27.3 29.9 25.3 25.4 25.9 28.0 30.4 S.C. 22.0 21.3 18.2 17.9 14.3 23.0 22.6 19.4 19.2 15.2 23.9 23.9 20.6 20.4 16.2
K.W. 1.18 1.16 1.17 1.17 1.19 1.18 1.16 1.17 1.16 1.18 1.20 1.17 1.17 1.17 1.19
T.C. 24.0 23.1 23.3 25.5 28.0 24.6 24.0 24.0 26.2 28.5 25.1 24.8 24.7 26.9 29.0 S.C. 21.3 20.7 17.9 17.5 13.9 22.3 21.9 19.0 18.8 14.8 23.2 23.1 20.1 20.0 15.7
K.W. 1.35 1.34 1.35 1.35 1.36 1.35 1.34 1.35 1.35 1.36 1.36 1.35 1.35 1.35 1.38
T.C. 23.3 22.4 22.2 24.4 26.6 24.1 23.2 22.9 25.1 27.2 25.0 24.1 23.5 25.8 27.7 S.C. 20.7 20.2 17.5 17.1 13.5 21.6 21.3 18.6 18.4 14.4 22.4 22.3 19.7 19.7 15.2
K.W. 1.52 1.52 1.53 1.54 1.54 1.52 1.52 1.52 1.53 1.55 1.53 1.53 1.53 1.53 1.56
T.C. 22.6 21.6 21.2 23.3 25.3 23.7 22.5 21.7 24.0 25.8 24.8 23.5 22.2 24.7 26.3 S.C. 20.0 19.7 17.2 16.6 13.1 20.8 20.6 18.3 18.0 13.9 21.7 21.5 19.3 19.3 14.7
K.W. 1.70 1.70 1.71 1.72 1.72 1.69 1.70 1.70 1.71 1.73 1.69 1.71 1.71 1.72 1.74
T.C. 21.6 20.5 19.8 21.7 23.7 22.6 21.4 20.3 22.4 24.2 23.6 22.2 20.8 23.1 24.7 S.C. 19.0 18.6 16.5 16.1 12.6 19.8 19.5 17.5 17.4 13.5 20.6 20.3 18.5 18.7 14.3
K.W. 1.97 1.97 1.97 1.98 1.98 1.96 1.96 1.97 1.98 1.98 1.96 1.97 1.98 1.98 2.00
T.C. 20.6 19.3 18.5 20.1 22.2 21.6 20.2 19.0 20.9 22.7 22.5 21.0 19.5 21.6 23.1 S.C. 18.1 17.6 15.7 15.5 12.1 18.9 18.4 16.8 16.8 13.0 19.6 19.2 17.8 18.0 13.8
K.W. 2.24 2.23 2.23 2.24 2.24 2.23 2.23 2.24 2.23 2.24 2.23 2.23 2.25 2.24 2.24
T.C. 19.7 18.2 17.2 18.6 20.7 20.6 19.1 17.7 19.3 21.1 21.4 19.8 18.2 20.0 21.5 S.C. 17.2 16.5 15.0 15.0 11.7 17.9 17.3 16.0 16.2 12.5 18.6 18.0 17.1 17.3 13.4
K.W. 2.50 2.49 2.49 2.49 2.49 2.49 2.49 2.50 2.49 2.49 2.49 2.49 2.52 2.49 2.49
56 Johnson Controls Unitary Products
Page 57
1109431-YTG-A-0714
Furnace Coil T.C. S.C. KW
T*(8,L)V*A12 FC/MC/PC37A 0.96 0.91 1.01 T*(8,L)V*B12 FC/MC/PC43B 0.97 0.93 1.00 T*(8,L)V*C16 FC/MC/PC43C 0.97 0.92 1.00 T*9V*A10 FC/MC/PC37A 0.96 0.91 1.07 T*9V*B12 FC/MC/PC43B 0.97 0.93 1.02 T*9V*C16 FC/MC/PC4 8C 0.99 0.98 1.03 T*9V*C16 FC/PC60C 1.00 0.99 1.02 T*9V*C16 UC48C 0.99 0.99 1.03 T*9V*C16 UC60C 1.00 0.99 1.02 T*9V*C20 FC/MC/PC4 3C 0.99 0.99 1.03 T*9V*C20 FC/MC/PC4 8C 0.99 0.98 1.03 T*9V*C20 UC48C 0.99 0.99 1.03 TM8X080C16MP11 FC/MC/PC43C 0.97 0.92 1.06 TM8X080C16MP11 FC/MC/PC48C 0.97 0.92 1.06 TM8X080C16MP11 FC/PC60C 0.98 0.94 1.07 TM8X080C16MP11 U C48C 0.96 0.92 1.05 TM8X080C16MP11 U C60C 0.98 0.94 1.07 TM8X100C16MP11 FC/MC/PC43C 0.97 0.92 1.06 TM8X100C16MP11 FC/MC/PC48C 0.97 0.92 1.06 TM8X100C16MP11 FC/PC60C 0.98 0.94 1.07 TM8X100C16MP11 U C48C 0.96 0.92 1.05 TM8X100C16MP11 U C60C 0.98 0.94 1.07 TMLX080C16MP11 FC/MC/PC43C 0.97 0.92 1.06
Furnace Coil T.C. S.C. KW
TMLX080C16MP11 FC/MC/PC48C 0.97 0.92 1.06 TMLX080C16MP11 FC/PC60C 0.98 0.94 1.07 TMLX080C16MP11 UC48C 0.96 0.92 1.05 TMLX080C16MP11 UC60C 0.98 0.94 1.07 TMLX100C16MP11 FC/MC/PC43C 0.97 0.92 1.06 TMLX100C16MP11 FC/MC/PC48C 0.97 0.92 1.06 TMLX100C16MP11 FC/PC60C 0.98 0.94 1.07 TMLX100C16MP11 UC48C 0.96 0.92 1.05 TMLX100C16MP11 UC60C 0.98 0.94 1.07 Y*LC*A12 FC/MC/PC37A 0.96 0.91 1.01 Y*LC*B12 FC/MC/PC43B 0.97 0.93 1.00 Y*LC*C16 FC/MC/PC43C 0.97 0.92 1.00 Y*9C*B12 FC/MC/PC43B 0.97 0.93 1.02 Y*9C*C16 FC/MC/PC48C 0.99 0.98 1.03 Y*9C*C16 FC/PC60C 1.00 0.99 1.02 Y*9C*C16 UC48C 0.99 0.99 1.03 Y*9C*C16 UC60C 1.00 0.99 1.02 Y*9C*C20 FC/MC/PC43C 0.99 0.99 1.03 Y*9C*C20 FC/MC/PC48C 0.99 0.98 1.03 Y*9C*C20 UC48C 0.99 0.99 1.03
Johnson Controls Unitary Products 57
Page 58
1109431-YTG-A-0714
COOLING PERFORMANCE DATA - LOW CFM 1-STAGE OPERATION
OUTDOOR UNIT MODEL NO. YZH03612C INDOOR COIL MODEL NO. FC/MC62D + MV12D
AIR TEMP.
ENTERING
OUTDOOR UNIT (°F)
65
75
85
95
105
115
125
NOTE: ALL CAPACI TIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
ID CFM 725 775 825
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
T.C. 28.8 26.6 26.9 29.2 32.6 29.6 27.4 27.2 30.0 33.1 30.4 28.2 27.4 30.7 33.6 S.C. 25.1 22.7 19.4 19.5 15.9 25.7 23.9 19.9 20.3 16.0 26.2 25.2 20.5 21.0 16.2
K.W. 1.18 1.18 1.18 1.16 1.15 1.19 1.19 1.20 1.17 1.16 1.21 1.20 1.22 1.18 1.17
T.C. 27.4 25.4 25.5 28.0 31.2 28.0 26.0 25.8 28.5 31.6 28.7 26.6 26.1 29.1 32.0 S.C. 24.0 22.3 18.8 18.9 15.2 24.6 23.4 19.5 19.7 15.5 25.2 24.4 20.1 20.4 15.8
K.W. 1.37 1.37 1.37 1.35 1.33 1.38 1.38 1.39 1.36 1.34 1.40 1.40 1.41 1.38 1.36
T.C. 26.0 24.2 24.0 26.7 29.7 26.5 24.6 24.4 27.1 30.0 27.0 25.0 24.8 27.5 30.3 S.C. 23.0 21.9 18.3 18.4 14.5 23.5 22.8 19.0 19.1 15.0 24.1 23.7 19.7 19.8 15.5
K.W. 1.56 1.56 1.56 1.54 1.52 1.57 1.58 1.58 1.56 1.53 1.58 1.59 1.59 1.57 1.54
T.C. 24.6 23.0 22.6 25.5 28.3 25.0 23.2 23.1 25.7 28.5 25.3 23.4 23.5 25.9 28.7 S.C. 21.9 21.5 17.7 17.8 13.9 22.5 22.3 18.5 18.5 14.5 23.0 23.0 19.3 19.2 15.1
K.W. 1.76 1.76 1.76 1.74 1.71 1.76 1.77 1.77 1.75 1.72 1.77 1.78 1.78 1.76 1.73
T.C. 22.5 21.4 20.9 23.7 26.1 22.8 21.7 21.3 23.8 26.4 23.1 21.9 21.6 24.0 26.7 S.C. 20.6 20.3 17.0 17.1 13.3 21.1 21.0 17.7 17.7 13.8 21.6 21.6 18.4 18.4 14.4
K.W. 2.02 2.02 2.02 2.00 1.97 2.03 2.03 2.03 2.01 1.99 2.04 2.04 2.05 2.03 2.00
T.C. 20.4 19.9 19.3 21.9 24.1 20.7 20.1 19.6 22.0 24.4 21.0 20.4 19.8 22.1 24.8 S.C. 19.3 19.2 16.2 16.3 12.7 19.8 19.7 16.9 17.0 13.1 20.2 20.3 17.5 17.7 13.6
K.W. 2.27 2.27 2.28 2.26 2.23 2.28 2.28 2.29 2.27 2.24 2.29 2.30 2.30 2.28 2.26
T.C. 18.3 18.3 17.7 20.1 22.0 18.6 18.6 17.8 20.2 22.4 18.9 18.9 17.9 20.2 22.8 S.C. 18.0 18.0 15.5 15.6 12.1 18.5 18.5 16.1 16.3 12.5 18.9 19.0 16.6 16.9 12.9
K.W. 2.53 2.53 2.54 2.52 2.49 2.54 2.54 2.55 2.53 2.50 2.55 2.55 2.56 2.54 2.52
LOW CFM
Air Handler Coil T.C. S.C. KW
– FC/MC62 1.01 1.03 1.21 AHE42D – 0.97 0.95 1.00 AHV36C – 1.00 1.01 1.01 AHV42D – 1.01 1.01 0.99 AHV48D – 1.02 1.03 0.99 MV12B FC/MC43B 1.01 1.01 1.03 MV12D FC/MC48D 1.01 1.01 1.01 MV12D FC/MC60D 0.99 0.97 1.02 MV12D FC/MC62D 1.00 1.00 1.00 MV12D FC64D 1.04 1.04 1.00 MV16C FC/MC43C 0.99 0.99 1.04 MV16C FC/MC48C 1.01 1.01 1.01 MV20D FC/MC48D 1.02 1.05 1.02 MV20D FC/MC60D 1.03 1.04 1.02 MV20D FC/MC62D 1.02 1.05 1.02 MV20D FC64D 1.06 1.08 1.00 MX12BN21 FC/MC43B 0.99 0.99 1.04 MX12DN21 FC/MC48D 1.02 1.03 1.00 MX12DN21 FC/MC60D 1.02 1.03 1.00 MX12DN21 FC64D 1.06 1.10 0.99
Furnace Coil T.C. S.C. KW
T*(8,L)V*A12 FC/MC/PC37A 0.97 0.95 1.06 T*(8,L)V*B12 FC/MC/PC43B 1.01 1.03 1.07 T*(8,L)V*C16 FC/MC/PC43C 0.99 0.99 1.04 T*(8,L)V*C16 FC/MC/PC48C 0.98 0.96 1.03 T*(8,L)V*C16 FC/PC60C 0.99 0.97 1.02 T*(8,L)V*C16 UC48C 0.99 1.00 1.04 T*(8,L)V*C16 UC60C 0.99 1.00 0.99 T*(8,L)V*C20 FC/MC/PC43C 0.99 0.97 1.03 T*(8,L)V*C20 FC/MC/PC48C 0.98 0.96 1.02 T*(8,L)V*C20 FC/PC60C 1.01 1.01 1.03 T*(8,L)V*C20 UC48C 0.97 0.94 1.03 T*(8,L)V*C20 UC60C 0.99 1.00 0.99 T*9V*B12 FC/MC/PC43B 1.01 1.01 1.06 T*9V*C16 FC/MC/PC43C 1.01 1.01 1.05 T*9V*C16 FC/MC/PC48C 1.01 1.01 1.01 T*9V*C16 FC/PC60C 1.01 1.01 1.05 T*9V*C16 UC48C 0.99 0.98 1.01 T*9V*C16 UC60C 1.00 1.00 1.04 T*9V*C20 FC/MC/PC43C 0.99 0.99 1.03 T*9V*C20 FC/MC/PC48C 0.99 0.97 1.04
Continued on next page.
58 Johnson Controls Unitary Products
Page 59
1109431-YTG-A-0714
Furnace Coil T.C. S.C. KW
T*9V*C20 FC/PC60C 1.00 0.99 1.02 T*9V*C20 UC48C 0.98 0.96 1.05 T*9V*C20 UC60C 0.99 0.98 1.03 T*9V*D20 FC/MC/PC4 8D 1.01 1.02 1.04 T*9V*D20 FC/MC/PC6 0D 1.02 1.02 1.03 T*9V*D20 FC/MC62D 1.01 1.03 1.04 T*9V*D20 FC64D 1.05 1.07 1.03 T*9V*D20 UC48D 1.00 1.01 1.04 T*9V*D20 UC60D 1.00 1.01 1.03 TM8X060A12MP11 FC/MC/PC37A 0.99 0.99 1.04 TM8X080B12MP11 FC/MC/PC43B 0.99 0.99 1.04 TM8X080C16MP11 FC/MC/PC43C 0.99 0.99 1.04 TM8X080C16MP11 FC/MC/PC48C 1.01 1.01 1.01 TM8X080C16MP11 FC/MC/PC48D 1.01 1.01 1.01 TM8X080C16MP11 FC/MC/PC60D 1.01 1.01 1.00 TM8X080C16MP11 FC/MC62D 1.01 1.01 1.01 TM8X080C16MP11 FC/PC60C 1.01 1.00 1.00 TM8X080C16MP11 FC64D 1.04 1.04 1.00 TM8X080C16MP11 U C48C 0.99 0.98 1.01 TM8X080C16MP11 U C48D 0.99 0.98 1.01 TM8X080C16MP11 U C60C 0.99 1.00 0.99 TM8X080C16MP11 U C60D 0.99 1.00 0.99 TM8X100C16MP11 FC/MC/PC43C 0.99 0.99 1.04 TM8X100C16MP11 FC/MC/PC48C 1.01 1.01 1.01 TM8X100C16MP11 FC/MC/PC48D 1.01 1.01 1.01 TM8X100C16MP11 FC/MC/PC60D 1.01 1.01 1.00 TM8X100C16MP11 FC/MC62D 1.01 1.01 1.01 TM8X100C16MP11 FC/PC60C 1.01 1.00 1.00 TM8X100C16MP11 FC64D 1.04 1.04 1.00 TM8X100C16MP11 U C48C 0.99 0.98 1.01 TM8X100C16MP11 U C48D 0.99 0.98 1.01 TM8X100C16MP11 U C60C 0.99 1.00 0.99 TM8X100C16MP11 U C60D 0.99 1.00 0.99 TMLX060A12MP11 FC/MC/PC37A 0.99 0.99 1.04 TMLX080B12MP11 FC/MC/PC43B 0.99 0.99 1.04 TMLX080C16MP11 FC/MC/PC43C 0.99 0.99 1.04 TMLX080C16MP11 FC/MC/PC48C 1.01 1.01 1.01 TMLX080C16MP11 FC/MC/PC48D 1.01 1.01 1.01 TMLX080C16MP11 FC/MC/PC60D 1.01 1.01 1.00 TMLX080C16MP11 FC/MC62D 1.01 1.01 1.01 TMLX080C16MP11 FC/PC60C 1.01 1.00 1.00 TMLX080C16MP11 FC64D 1.04 1.04 1.00 TMLX080C16MP11 U C48C 0.99 0.98 1.01 TMLX080C16MP11 U C48D 0.99 0.98 1.01 TMLX080C16MP11 U C60C 0.99 1.00 0.99 TMLX080C16MP11 U C60D 0.99 1.00 0.99 TMLX100C16MP11 FC/MC/PC43C 0.99 0.99 1.04 TMLX100C16MP11 FC/MC/PC48C 1.01 1.01 1.01 TMLX100C16MP11 FC/MC/PC48D 1.01 1.01 1.01 TMLX100C16MP11 FC/MC/PC60D 1.01 1.01 1.00 TMLX100C16MP11 FC/MC62D 1.01 1.01 1.01 TMLX100C16MP11 FC/PC60C 1.01 1.00 1.00 TMLX100C16MP11 FC64D 1.04 1.04 1.00 TMLX100C16MP11 U C48C 0.99 0.98 1.01
Furnace Coil T.C. S.C. KW
TMLX100C16MP11 UC48D 0.99 0.98 1.01 TMLX100C16MP11 UC60C 0.99 1.00 0.99 TMLX100C16MP11 UC60D 0.99 1.00 0.99 TM9E060B12MP11 FC/MC/PC43B 0.98 0.96 1.02 TM9E080B12MP11 FC/MC/PC43B 0.98 0.96 1.02 TM9E080C16MP11 FC/MC/PC48D 1.01 1.01 1.01 TM9E080C16MP11 FC/MC62D 1.00 0.99 1.01 TM9E080C16MP11 FC64D 1.04 1.04 1.00 TM9E080C16MP11 UC48D 0.99 0.98 1.01 TM9E100C16MP11 FC/MC/PC48D 1.01 1.01 1.01 TM9E100C16MP11 FC/MC62D 1.00 0.99 1.01 TM9E100C16MP11 FC64D 1.04 1.04 1.00 TM9E100C16MP11 UC48D 0.99 0.98 1.01 TM9X060B12MP11 FC/MC/PC43B 0.98 0.96 1.02 TM9X080B12MP11 FC/MC/PC43B 0.98 0.96 1.02 TM9X080C16MP11 FC/MC/PC48D 1.01 1.01 1.01 TM9X080C16MP11 FC/MC62D 1.00 0.99 1.01 TM9X080C16MP11 FC64D 1.04 1.04 1.00 TM9X080C16MP11 UC48D 0.99 0.98 1.01 TM9X100C16MP11 FC/MC/PC48D 1.01 1.01 1.01 TM9X100C16MP11 FC/MC62D 1.00 0.99 1.01 TM9X100C16MP11 FC64D 1.04 1.04 1.00 TM9X100C16MP11 UC48D 0.99 0.98 1.01 Y*LC*A12 FC/MC/PC37A 0.97 0.95 1.06 Y*LC*B12 FC/MC/PC43B 1.01 1.03 1.07 Y*LC*C16 FC/MC/PC43C 0.99 0.99 1.04 Y*LC*C16 FC/MC/PC48C 0.98 0.96 1.03 Y*LC*C16 FC/PC60C 0.99 0.97 1.02 Y*LC*C16 UC48C 0.99 1.00 1.04 Y*LC*C16 UC60C 0.99 1.00 0.99 Y*LC*C20 FC/MC/PC43C 0.99 0.97 1.03 Y*LC*C20 FC/MC/PC48C 0.98 0.96 1.02 Y*LC*C20 FC/PC60C 1.01 1.01 1.03 Y*LC*C20 UC48C 0.97 0.94 1.03 Y*LC*C20 UC60C 0.99 1.00 0.99 Y*9C*B12 FC/MC/PC43B 1.01 1.01 1.06 Y*9C*C16 FC/MC/PC43C 1.01 1.01 1.05 Y*9C*C16 FC/MC/PC48C 1.01 1.01 1.01 Y*9C*C16 FC/PC60C 1.01 1.01 1.05 Y*9C*C16 UC48C 0.99 0.98 1.01 Y*9C*C16 UC60C 1.00 1.00 1.04 Y*9C*C20 FC/MC/PC43C 0.99 0.99 1.03 Y*9C*C20 FC/MC/PC48C 0.99 0.97 1.04 Y*9C*C20 FC/PC60C 1.00 0.99 1.02 Y*9C*C20 UC48C 0.98 0.96 1.05 Y*9C*C20 UC60C 0.99 0.98 1.03 Y*9C*D20 FC/MC/PC48D 1.01 1.02 1.04 Y*9C*D20 FC/MC/PC60D 1.02 1.02 1.03 Y*9C*D20 FC/MC62D 1.01 1.03 1.04 Y*9C*D20 FC64D 1.05 1.07 1.03 Y*9C*D20 UC48D 1.00 1.01 1.04 Y*9C*D20 UC60D 1.00 1.01 1.03
Johnson Controls Unitary Products 59
Page 60
1109431-YTG-A-0714
COOLING PERFORMANCE DATA - HIGH CFM 2-STAGE OPERATION
OUTDOOR UNIT MODEL NO. YZH03612C INDOOR COIL MODEL NO. FC/MC62D + MV12D
AIR TEMP.
ENTERING
OUTDOOR UNIT (°F)
65
75
85
95
105
115
125
NOTE: ALL CAPACI TIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
HIGH CFM
Air Handler Coil T.C. S.C. KW
– FC/MC62 0.98 0.96 1.10 AHE42D – 0.98 0.96 1.00 AHV36C – 0.98 0.96 1.03 AHV42D – 0.98 0.96 1.00 AHV48D – 0.99 0.95 1.01 MV12B FC/MC43B 0.98 0.97 1.04 MV12D FC/MC48D 0.98 0.96 1.00 MV12D FC/MC60D 0.98 0.94 1.01 MV12D FC/MC62D 1.00 1.00 1.00 MV12D FC64D 1.02 1.00 1.00 MV16C FC/MC43C 0.98 0.96 1.02 MV16C FC/MC48C 0.98 0.95 1.01 MV20D FC/MC48D 1.00 1.01 1.02 MV20D FC/MC60D 1.01 1.00 1.02 MV20D FC/MC62D 1.01 1.03 1.01 MV20D FC64D 1.04 1.06 1.02 MX12BN21 FC/MC43B 0.97 0.92 1.04 MX12DN21 FC/MC48D 0.98 0.94 1.00 MX12DN21 FC/MC60D 0.99 0.95 0.99 MX12DN21 FC64D 1.02 1.00 1.00
ID CFM 1125 1225 1325
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
T.C. 40.2 37.6 37.8 42.4 46.0 40.7 38.2 38.2 42.3 45.8 41.1 38.8 38.6 42.3 45.7 S.C. 35.4 32.8 27.5 27.2 21.9 36.3 34.1 28.4 28.2 22.3 37.2 35.5 29.3 29.2 22.7
K.W. 1.86 1.88 1.87 1.91 1.93 1.92 1.93 1.93 1.96 1.98 1.98 1.99 1.99 2.02 2.04
T.C. 38.7 36.1 36.1 40.1 43.9 39.2 36.6 36.5 40.2 43.8 39.6 37.1 36.9 40.3 43.6 S.C. 34.0 32.1 26.8 26.7 21.3 34.9 33.4 27.8 27.7 21.8 35.7 34.6 28.8 28.6 22.3
K.W. 2.08 2.09 2.08 2.12 2.14 2.13 2.14 2.13 2.17 2.19 2.19 2.20 2.19 2.22 2.24
T.C. 37.3 34.6 34.3 37.8 41.9 37.7 35.0 34.7 38.1 41.8 38.1 35.4 35.2 38.3 41.6 S.C. 32.6 31.5 26.0 26.2 20.7 33.4 32.6 27.2 27.2 21.3 34.2 33.7 28.3 28.1 21.8
K.W. 2.29 2.29 2.28 2.32 2.34 2.34 2.35 2.34 2.37 2.39 2.40 2.41 2.40 2.43 2.45
T.C. 35.8 33.0 32.5 35.6 39.8 36.2 33.4 33.0 36.0 39.7 36.7 33.6 33.4 36.4 39.6 S.C. 31.2 30.9 25.3 25.7 20.0 31.9 31.9 26.6 26.6 20.7 32.6 32.8 27.9 27.6 21.4
K.W. 2.50 2.50 2.49 2.52 2.55 2.55 2.56 2.54 2.57 2.60 2.61 2.62 2.60 2.63 2.65
T.C. 32.8 31.1 30.5 33.3 37.3 33.4 31.5 30.9 33.7 37.2 33.9 32.0 31.3 34.0 37.2 S.C. 29.5 29.4 24.5 24.8 19.2 30.2 30.2 25.8 25.8 19.8 30.9 31.0 27.0 26.8 20.4
K.W. 2.81 2.81 2.80 2.83 2.85 2.86 2.86 2.84 2.87 2.90 2.93 2.92 2.90 2.93 2.95
T.C. 29.9 29.2 28.5 31.1 34.8 30.6 29.8 28.8 31.5 34.8 31.2 30.3 29.2 31.8 34.8 S.C. 27.9 28.0 23.8 24.0 18.4 28.5 28.7 25.0 25.0 19.0 29.1 29.3 26.1 26.0 19.5
K.W. 3.11 3.10 3.09 3.12 3.14 3.17 3.15 3.14 3.17 3.19 3.23 3.21 3.20 3.23 3.24
T.C. 27.1 27.2 26.5 28.9 32.4 27.8 28.0 26.8 29.2 32.4 28.5 28.7 27.1 29.5 32.4 S.C. 26.3 26.6 23.1 23.1 17.6 26.8 27.1 24.1 24.2 18.1 27.4 27.6 25.2 25.2 18.6
K.W. 3.40 3.39 3.38 3.41 3.43 3.47 3.44 3.43 3.46 3.48 3.54 3.50 3.49 3.52 3.53
Furnace Coil T.C. S.C. KW
T*(8,L)V*A12 FC/MC/PC37A 0.96 0.92 1.08 T*(8,L)V*B12 FC/MC/PC43B 0.98 0.97 1.10 T*(8,L)V*C16 FC/MC/PC43C 0.98 0.95 1.03 T*(8,L)V*C16 FC/MC/PC48C 0.99 0.97 1.03 T*(8,L)V*C16 FC/PC60C 0.98 0.94 1.02 T*(8,L)V*C16 UC48C 0.99 0.97 1.03 T*(8,L)V*C16 UC60C 0.98 0.95 1.01 T*(8,L)V*C20 FC/MC/PC43C 0.98 0.95 1.03 T*(8,L)V*C20 FC/MC/PC48C 0.98 0.94 1.01 T*(8,L)V*C20 FC/PC60C 0.99 0.97 1.03 T*(8,L)V*C20 UC48C 0.99 0.95 1.01 T*(8,L)V*C20 UC60C 0.98 0.95 1.01 T*9V*B12 FC/MC/PC43B 0.97 0.94 1.06 T*9V*C16 FC/MC/PC43C 0.98 0.97 1.05 T*9V*C16 FC/MC/PC48C 0.97 0.94 1.03 T*9V*C16 FC/PC60C 0.99 0.97 1.04 T*9V*C16 UC48C 0.98 0.94 1.04 T*9V*C16 UC60C 0.98 0.97 1.05 T*9V*C20 FC/MC/PC43C 0.98 0.95 1.03 T*9V*C20 FC/MC/PC48C 1.00 1.00 1.08 T*9V*C20 FC/PC60C 1.01 1.00 1.06
Continued on next page.
60 Johnson Controls Unitary Products
Page 61
1109431-YTG-A-0714
Furnace Coil T.C. S.C. KW
T*9V*C20 UC48C 1.00 1.01 1.08 T*9V*C20 UC60C 0.99 1.00 1.07 T*9V*D20 FC/MC/PC4 8D 0.99 0.98 1.03 T*9V*D20 FC/MC/PC6 0D 0.99 0.97 1.03 T*9V*D20 FC/MC62D 0.99 1.00 1.03 T*9V*D20 FC64D 1.02 1.02 1.04 T*9V*D20 UC48D 0.99 0.98 1.03 T*9V*D20 UC60D 0.98 0.97 1.04 TM8X060A12MP11 FC/MC/PC37A 0.96 0.92 1.06 TM8X080B12MP11 FC/MC/PC43B 0.96 0.92 1.06 TM8X080C16MP11 FC/MC/PC43C 0.97 0.92 1.02 TM8X080C16MP11 FC/MC/PC48C 0.98 0.95 1.01 TM8X080C16MP11 FC/MC/PC48D 0.98 0.95 1.01 TM8X080C16MP11 FC/MC/PC60D 0.98 0.95 1.02 TM8X080C16MP11 FC/MC62D 0.99 0.97 1.03 TM8X080C16MP11 FC/PC60C 0.98 0.95 1.02 TM8X080C16MP11 FC64D 1.01 1.00 1.03 TM8X080C16MP11 U C48C 0.98 0.95 1.02 TM8X080C16MP11 U C48D 0.98 0.95 1.02 TM8X080C16MP11 U C60C 0.98 0.95 1.03 TM8X080C16MP11 U C60D 0.98 0.95 1.01 TM8X100C16MP11 FC/MC/PC43C 0.97 0.92 1.02 TM8X100C16MP11 FC/MC/PC48C 0.98 0.95 1.01 TM8X100C16MP11 FC/MC/PC48D 0.98 0.95 1.01 TM8X100C16MP11 FC/MC/PC60D 0.98 0.95 1.02 TM8X100C16MP11 FC/MC62D 0.99 0.97 1.03 TM8X100C16MP11 FC/PC60C 0.98 0.95 1.02 TM8X100C16MP11 FC64D 1.01 1.00 1.03 TM8X100C16MP11 U C48C 0.98 0.95 1.02 TM8X100C16MP11 U C48D 0.98 0.95 1.02 TM8X100C16MP11 U C60C 0.98 0.95 1.03 TM8X100C16MP11 U C60D 0.98 0.95 1.01 TMLX060A12MP11 FC/MC/PC37A 0.96 0.92 1.06 TMLX080B12MP11 FC/MC/PC43B 0.96 0.92 1.06 TMLX080C16MP11 FC/MC/PC43C 0.97 0.92 1.02 TMLX080C16MP11 FC/MC/PC48C 0.98 0.95 1.01 TMLX080C16MP11 FC/MC/PC48D 0.98 0.95 1.01 TMLX080C16MP11 FC/MC/PC60D 0.98 0.95 1.02 TMLX080C16MP11 FC/MC62D 0.99 0.97 1.03 TMLX080C16MP11 FC/PC60C 0.98 0.95 1.02 TMLX080C16MP11 FC64D 1.01 1.00 1.03 TMLX080C16MP11 U C48C 0.98 0.95 1.02 TMLX080C16MP11 U C48D 0.98 0.95 1.02 TMLX080C16MP11 U C60C 0.98 0.95 1.03 TMLX080C16MP11 U C60D 0.98 0.95 1.01 TMLX100C16MP11 FC/MC/PC43C 0.97 0.92 1.02 TMLX100C16MP11 FC/MC/PC48C 0.98 0.95 1.01 TMLX100C16MP11 FC/MC/PC48D 0.98 0.95 1.01 TMLX100C16MP11 FC/MC/PC60D 0.98 0.95 1.02 TMLX100C16MP11 FC/MC62D 0.99 0.97 1.03 TMLX100C16MP11 FC/PC60C 0.98 0.95 1.02 TMLX100C16MP11 FC64D 1.01 1.00 1.03 TMLX100C16MP11 U C48C 0.98 0.95 1.02 TMLX100C16MP11 U C48D 0.98 0.95 1.02
Furnace Coil T.C. S.C. KW
TMLX100C16MP11 UC60C 0.98 0.95 1.03 TMLX100C16MP11 UC60D 0.98 0.95 1.01 TM9E060B12MP11 FC/MC/PC43B 0.96 0.92 1.06 TM9E080B12MP11 FC/MC/PC43B 0.96 0.92 1.06 TM9E080C16MP11 FC/MC/PC48D 0.97 0.94 1.03 TM9E080C16MP11 FC/MC62D 0.98 0.97 1.04 TM9E080C16MP11 FC64D 1.01 0.99 1.03 TM9E080C16MP11 UC48D 0.98 0.94 1.04 TM9E100C16MP11 FC/MC/PC48D 0.97 0.94 1.03 TM9E100C16MP11 FC/MC62D 0.98 0.97 1.04 TM9E100C16MP11 FC64D 1.01 0.99 1.03 TM9E100C16MP11 UC48D 0.98 0.94 1.04 TM9X060B12MP11 FC/MC/PC43B 0.96 0.92 1.06 TM9X080B12MP11 FC/MC/PC43B 0.96 0.92 1.06 TM9X080C16MP11 FC/MC/PC48D 0.97 0.94 1.03 TM9X080C16MP11 FC/MC62D 0.98 0.97 1.04 TM9X080C16MP11 FC64D 1.01 0.99 1.03 TM9X080C16MP11 UC48D 0.98 0.94 1.04 TM9X100C16MP11 FC/MC/PC48D 0.97 0.94 1.03 TM9X100C16MP11 FC/MC62D 0.98 0.97 1.04 TM9X100C16MP11 FC64D 1.01 0.99 1.03 TM9X100C16MP11 UC48D 0.98 0.94 1.04 Y*LC*A12 FC/MC/PC37A 0.96 0.92 1.08 Y*LC*B12 FC/MC/PC43B 0.98 0.97 1.10 Y*LC*C16 FC/MC/PC43C 0.98 0.95 1.03 Y*LC*C16 FC/MC/PC48C 0.99 0.97 1.03 Y*LC*C16 FC/PC60C 0.98 0.94 1.02 Y*LC*C16 UC48C 0.99 0.97 1.03 Y*LC*C16 UC60C 0.98 0.95 1.01 Y*LC*C20 FC/MC/PC43C 0.98 0.95 1.03 Y*LC*C20 FC/MC/PC48C 0.98 0.94 1.01 Y*LC*C20 FC/PC60C 0.99 0.97 1.03 Y*LC*C20 UC48C 0.99 0.95 1.01 Y*LC*C20 UC60C 0.98 0.95 1.01 Y*9C*B12 FC/MC/PC43B 0.97 0.94 1.06 Y*9C*C16 FC/MC/PC43C 0.98 0.97 1.05 Y*9C*C16 FC/MC/PC48C 0.97 0.94 1.03 Y*9C*C16 FC/PC60C 0.99 0.97 1.04 Y*9C*C16 UC48C 0.98 0.94 1.04 Y*9C*C16 UC60C 0.98 0.97 1.05 Y*9C*C20 FC/MC/PC43C 0.98 0.95 1.03 Y*9C*C20 FC/MC/PC48C 1.00 1.00 1.08 Y*9C*C20 FC/PC60C 1.01 1.00 1.06 Y*9C*C20 UC48C 1.00 1.01 1.08 Y*9C*C20 UC60C 0.99 1.00 1.07 Y*9C*D20 FC/MC/PC48D 0.99 0.98 1.03 Y*9C*D20 FC/MC/PC60D 0.99 0.97 1.03 Y*9C*D20 FC/MC62D 0.99 1.00 1.03 Y*9C*D20 FC64D 1.02 1.02 1.04 Y*9C*D20 UC48D 0.99 0.98 1.03 Y*9C*D20 UC60D 0.98 0.97 1.04
Johnson Controls Unitary Products 61
Page 62
1109431-YTG-A-0714
COOLING PERFORMANCE DATA - LOW CFM 1-STAGE OPERATION
OUTDOOR UNIT MODEL NO. YZH04812C INDOOR COIL MODEL NO. FC/MC62D + MV20D
AIR TEMP.
ENTERING
OUTDOOR UNIT (°F)
65
75
85
95
105
115
125
NOTE: ALL CAPACI TIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
LOW CFM
Air Handler Coil T.C. S.C. KW
– FC/MC62 1.00 1.02 1.19 AHE60D – 1.01 1.03 1.04 AHV48D – 1.00 0.96 1.01 AHV60D – 0.99 0.97 1.01 MV16C FC/MC48C 1.00 0.98 1.03 MV16C FC60C 1.00 0.97 1.03 MV20D FC/MC48D 1.00 0.98 1.03 MV20D FC/MC60D 1.00 0.97 1.03 MV20D FC/MC62D 1.00 1.00 1.00 MV20D FC64D 1.04 1.04 1.00 MX16CN21 FC/MC48C 1.00 0.98 1.03 MX16CN21 FC60C 1.00 0.97 1.03
Continued on next page.
ID CFM 1025 1075 1125
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
T.C. 35.9 36.7 36.8 40.8 44.3 36.8 37.3 36.9 40.9 44.8 39.7 39.7 38.9 43.2 47.9 S.C. 33.8 31.0 26.6 26.5 21.1 34.5 31.9 27.2 27.2 21.5 36.7 33.5 28.5 28.7 22.7 KW 1.58 1.57 1.56 1.55 1.52 1.59 1.59 1.58 1.56 1.54 1.32 1.32 1.32 1.29 1.26 T.C. 34.3 35.0 35.0 38.6 42.0 35.0 35.5 35.2 38.8 42.4 35.7 35.9 35.3 39.0 42.8 S.C. 32.5 30.4 25.8 25.7 20.4 33.1 31.2 26.4 26.4 20.8 33.7 32.0 27.0 27.1 21.3 KW 1.87 1.86 1.86 1.84 1.81 1.88 1.88 1.88 1.86 1.83 1.90 1.90 1.90 1.87 1.84 T.C. 32.7 33.3 33.2 36.3 39.7 33.2 33.7 33.4 36.6 40.0 31.8 32.2 31.8 34.7 37.7 S.C. 31.1 29.7 24.9 24.9 19.6 31.7 30.5 25.6 25.6 20.1 30.7 30.5 25.5 25.5 19.8 KW 2.16 2.15 2.16 2.13 2.10 2.17 2.17 2.17 2.15 2.12 2.47 2.47 2.48 2.46 2.43 T.C. 31.1 31.6 31.5 34.1 37.4 31.5 31.9 31.6 34.4 37.6 31.8 32.2 31.8 34.7 37.7 S.C. 29.8 29.1 24.1 24.1 18.9 30.2 29.8 24.8 24.8 19.4 30.7 30.5 25.5 25.5 19.8 KW 2.46 2.45 2.46 2.43 2.39 2.46 2.46 2.47 2.44 2.41 2.47 2.47 2.48 2.46 2.43 T.C. 29.1 29.3 28.9 31.7 34.8 29.5 29.7 29.1 31.9 34.9 29.8 30.0 29.2 32.2 35.0 S.C. 27.9 27.6 23.0 23.2 18.1 28.4 28.2 23.6 23.8 18.5 28.8 28.8 24.3 24.4 18.9 KW 2.84 2.83 2.85 2.82 2.78 2.85 2.85 2.86 2.83 2.80 2.86 2.87 2.88 2.85 2.82 T.C. 27.2 27.1 26.4 29.3 32.1 27.5 27.5 26.6 29.5 32.3 27.8 27.9 26.8 29.7 32.4 S.C. 26.2 26.1 21.9 22.5 17.2 26.5 26.7 22.6 22.9 17.6 26.9 27.2 23.2 23.4 17.9 KW 3.21 3.21 3.23 3.20 3.17 3.22 3.23 3.24 3.21 3.18 3.24 3.25 3.25 3.23 3.20 T.C. 25.3 25.0 23.9 27.0 29.5 25.6 25.4 24.1 27.1 29.6 25.9 25.9 24.3 27.3 29.7 S.C. 24.4 24.7 20.9 21.7 16.3 24.7 25.1 21.5 22.0 16.6 25.1 25.6 22.1 22.4 16.9 KW 3.59 3.59 3.60 3.58 3.56 3.60 3.60 3.62 3.59 3.57 3.61 3.62 3.63 3.61 3.58
62 Johnson Controls Unitary Products
Page 63
1109431-YTG-A-0714
Furnace Coil T.C. S.C. KW
T*(8,L)V*C16 FC/MC/PC48C 1.01 1.01 1.07 T*(8,L)V*C16 FC/MC/PC48D 1.01 1.01 1.07 T*(8,L)V*C16 FC/MC/PC60D 1.00 0.97 1.03 T*(8,L)V*C16 FC/MC62D 0.99 0.97 1.04 T*(8,L)V*C16 FC/PC60C 1.00 0.97 1.03 T*(8,L)V*C16 FC64D 1.04 1.04 1.00 T*(8,L)V*C16 UC48C 1.00 0.97 1.06 T*(8,L)V*C16 UC60C 0.99 0.96 1.04 T*(8,L)V*C20 FC/MC/PC48C 1.00 0.98 1.03 T*(8,L)V*C20 FC/MC/PC48D 1.00 0.98 1.03 T*(8,L)V*C20 FC/MC/PC60D 1.00 0.97 1.03 T*(8,L)V*C20 FC/MC62D 1.00 0.99 1.05 T*(8,L)V*C20 FC/PC60C 1.00 0.97 1.03 T*(8,L)V*C20 FC64D 1.04 1.04 1.00 T*(8,L)V*C20 UC48C 1.00 0.98 1.06 T*(8,L)V*C20 UC60C 0.97 0.95 1.03 T*9V*C16 FC/MC/PC4 8C 1.00 0.98 1.03 T*9V*C16 FC/MC/PC4 8D 1.00 0.98 1.03 T*9V*C16 FC/MC/PC6 0D 1.00 0.97 1.03 T*9V*C16 FC/MC62D 0.99 0.98 1.04 T*9V*C16 FC/PC60C 1.00 0.97 1.03 T*9V*C16 FC64D 1.04 1.04 1.00 T*9V*C16 UC48C 1.00 0.98 1.03 T*9V*C16 UC60C 0.97 0.95 1.02 T*9V*C20 FC/MC/PC4 8C 1.00 0.98 1.03 T*9V*C20 FC/MC/PC4 8D 1.00 0.98 1.03 T*9V*C20 FC/MC/PC6 0D 1.00 0.97 1.03 T*9V*C20 FC/MC62D 0.99 0.98 1.04 T*9V*C20 FC/PC60C 1.00 0.97 1.03 T*9V*C20 FC64D 1.04 1.04 1.00 T*9V*C20 UC48C 1.00 0.98 1.06 T*9V*C20 UC60C 0.99 0.97 1.06 T*9V*D20 FC/MC/PC4 8D 1.00 0.98 1.03 T*9V*D20 FC/MC/PC6 0D 1.00 0.97 1.03 T*9V*D20 FC/MC62D 1.00 1.00 1.06 T*9V*D20 FC64D 1.04 1.04 1.00 T*9V*D20 UC48D 1.00 0.98 1.06 T*9V*D20 UC60D 0.99 0.97 1.06 TM8X080C16MP11 FC/MC/PC48C 1.00 0.98 1.03 TM8X080C16MP11 FC/MC/PC48D 1.00 0.98 1.03 TM8X080C16MP11 FC/MC/PC60D 1.00 0.97 1.03 TM8X080C16MP11 FC/MC62D 0.99 0.98 1.02 TM8X080C16MP11 FC/PC60C 0.99 0.96 1.02 TM8X080C16MP11 FC64D 1.04 1.04 1.00 TM8X080C16MP11 U C48C 1.00 0.98 1.03 TM8X080C16MP11 U C48D 1.00 0.98 1.03 TM8X080C16MP11 U C60C 0.97 0.95 1.02 TM8X080C16MP11 U C60D 0.97 0.95 1.02 TM8X100C16MP11 FC/MC/PC48C 1.00 0.98 1.03 TM8X100C16MP11 FC/MC/PC48D 1.00 0.98 1.03 TM8X100C16MP11 FC/MC/PC60D 1.00 0.97 1.03 TM8X100C16MP11 FC/MC62D 0.99 0.98 1.02 TM8X100C16MP11 FC/PC60C 0.99 0.96 1.02 TM8X100C16MP11 FC64D 1.04 1.04 1.00 TM8X100C16MP11 U C48C 1.00 0.98 1.03 TM8X100C16MP11 U C48D 1.00 0.98 1.03
Furnace Coil T.C. S.C. KW
TM8X100C16MP11 UC60C 0.97 0.95 1.02 TM8X100C16MP11 UC60D 0.97 0.95 1.02 TM8X100C20MP11 FC/MC/PC48C 1.00 1.00 1.03 TM8X100C20MP11 FC/MC/PC48D 1.01 1.01 1.04 TM8X100C20MP11 FC/MC/PC60D 1.01 1.00 1.04 TM8X100C20MP11 FC/MC62D 1.01 1.02 1.04 TM8X100C20MP11 FC/PC60C 1.00 0.97 1.03 TM8X100C20MP11 UC48C 1.00 0.99 1.03 TM8X100C20MP11 UC48D 1.01 1.01 1.04 TM8X100C20MP11 UC60C 0.99 0.98 1.03 TM8X100C20MP11 UC60D 1.00 0.99 1.03 TM8X120C20MP11 FC/MC/PC48C 1.00 1.00 1.03 TM8X120C20MP11 FC/MC/PC48D 1.01 1.01 1.04 TM8X120C20MP11 FC/MC/PC60D 1.01 1.00 1.04 TM8X120C20MP11 FC/MC62D 1.01 1.02 1.04 TM8X120C20MP11 FC/PC60C 1.00 0.97 1.03 TM8X120C20MP11 UC48C 1.00 0.99 1.03 TM8X120C20MP11 UC48D 1.01 1.01 1.04 TM8X120C20MP11 UC60C 0.99 0.98 1.03 TM8X120C20MP11 UC60D 1.00 0.99 1.03 TMLX080C16MP11 FC/MC/PC48C 1.00 0.98 1.03 TMLX080C16MP11 FC/MC/PC48D 1.00 0.98 1.03 TMLX080C16MP11 FC/MC/PC60D 1.00 0.97 1.03 TMLX080C16MP11 FC/MC62D 0.99 0.98 1.02 TMLX080C16MP11 FC/PC60C 0.99 0.96 1.02 TMLX080C16MP11 FC64D 1.04 1.04 1.00 TMLX080C16MP11 UC48C 1.00 0.98 1.03 TMLX080C16MP11 UC48D 1.00 0.98 1.03 TMLX080C16MP11 UC60C 0.97 0.95 1.02 TMLX080C16MP11 UC60D 0.97 0.95 1.02 TMLX100C16MP11 FC/MC/PC48C 1.00 0.98 1.03 TMLX100C16MP11 FC/MC/PC48D 1.00 0.98 1.03 TMLX100C16MP11 FC/MC/PC60D 1.00 0.97 1.03 TMLX100C16MP11 FC/MC62D 0.99 0.98 1.02 TMLX100C16MP11 FC/PC60C 0.99 0.96 1.02 TMLX100C16MP11 FC64D 1.04 1.04 1.00 TMLX100C16MP11 UC48C 1.00 0.98 1.03 TMLX100C16MP11 UC48D 1.00 0.98 1.03 TMLX100C16MP11 UC60C 0.97 0.95 1.02 TMLX100C16MP11 UC60D 0.97 0.95 1.02 TMLX100C20MP11 FC/MC/PC48C 1.00 1.00 1.03 TMLX100C20MP11 FC/MC/PC48D 1.01 1.01 1.04 TMLX100C20MP11 FC/MC/PC60D 1.01 1.00 1.04 TMLX100C20MP11 FC/MC62D 1.01 1.02 1.04 TMLX100C20MP11 FC/PC60C 1.00 0.97 1.03 TMLX100C20MP11 UC48C 1.00 0.99 1.03 TMLX100C20MP11 UC48D 1.01 1.01 1.04 TMLX100C20MP11 UC60C 0.99 0.98 1.03 TMLX100C20MP11 UC60D 1.00 0.99 1.03 TMLX120C20MP11 FC/MC/PC48C 1.00 1.00 1.03 TMLX120C20MP11 FC/MC/PC48D 1.01 1.01 1.04 TMLX120C20MP11 FC/MC/PC60D 1.01 1.00 1.04 TMLX120C20MP11 FC/MC62D 1.01 1.02 1.04 TMLX120C20MP11 FC/PC60C 1.00 0.97 1.03 TMLX120C20MP11 UC48C 1.00 0.99 1.03
Continued on next page.
Johnson Controls Unitary Products 63
Page 64
1109431-YTG-A-0714
Furnace Coil T.C. S.C. KW
TMLX120C20MP11 UC48D 1.01 1.01 1.04 TMLX120C20MP11 UC60C 0.99 0.98 1.03 TMLX120C20MP11 UC60D 1.00 0.99 1.03 TM9E100C20MP11 FC/MC/PC48C 0.97 0.94 1.02 TM9E100C20MP11 FC/MC/PC48D 0.99 0.94 1.02 TM9E100C20MP11 FC/MC/PC60D 0.97 0.94 1.01 TM9E100C20MP11 FC/MC62D 0.97 0.95 1.01 TM9E100C20MP11 FC64D 1.01 0.99 1.00 TM9E100C20MP11 UC48C 0.97 0.94 1.02 TM9E100C20MP11 UC48D 0.99 0.95 1.03 TM9E100C20MP11 UC60D 0.97 0.93 1.03 TM9E120D20MP11 FC/MC/PC48D 0.99 0.95 1.02 TM9E120D20MP11 FC/MC/PC60D 0.99 0.95 1.01 TM9E120D20MP11 FC/MC62D 0.97 0.95 1.01 TM9E120D20MP11 FC64D 1.01 0.98 1.00 TM9E120D20MP11 UC48D 0.99 0.95 1.02 TM9E120D20MP11 UC60D 0.97 0.95 1.02 TM9X100C20MP11 FC/MC/PC48C 0.97 0.94 1.02 TM9X100C20MP11 FC/MC/PC48D 0.99 0.94 1.02 TM9X100C20MP11 FC/MC/PC60D 0.97 0.94 1.01 TM9X100C20MP11 FC/MC62D 0.97 0.95 1.01 TM9X100C20MP11 FC64D 1.01 0.99 1.00 TM9X100C20MP11 UC48C 0.97 0.94 1.02 TM9X100C20MP11 UC48D 0.99 0.95 1.03 TM9X100C20MP11 UC60D 0.97 0.93 1.03 TM9X120D20MP11 FC/MC/PC48D 0.99 0.95 1.02 TM9X120D20MP11 FC/MC/PC60D 0.99 0.95 1.01 TM9X120D20MP11 FC/MC62D 0.97 0.95 1.01 TM9X120D20MP11 FC64D 1.01 0.98 1.00 TM9X120D20MP11 UC48D 0.99 0.95 1.02 TM9X120D20MP11 UC60D 0.97 0.95 1.02 Y*LC*C16 FC/MC/PC48C 1.01 1.01 1.07 Y*LC*C16 FC/MC/PC48D 1.01 1.01 1.07 Y*LC*C16 FC/MC/PC60D 1.00 0.97 1.03 Y*LC*C16 FC/MC62D 0.99 0.97 1.04 Y*LC*C16 FC/PC60C 1.00 0.97 1.03
Furnace Coil T.C. S.C. KW
Y*LC*C16 FC64D 1.04 1.04 1.00 Y*LC*C16 UC48C 1.00 0.97 1.06 Y*LC*C16 UC60C 0.99 0.96 1.04 Y*LC*C20 FC/MC/PC48C 1.00 0.98 1.03 Y*LC*C20 FC/MC/PC48D 1.00 0.98 1.03 Y*LC*C20 FC/MC/PC60D 1.00 0.97 1.03 Y*LC*C20 FC/MC62D 1.00 0.99 1.05 Y*LC*C20 FC/PC60C 1.00 0.97 1.03 Y*LC*C20 FC64D 1.04 1.04 1.00 Y*LC*C20 UC48C 1.00 0.98 1.06 Y*LC*C20 UC60C 0.97 0.95 1.03 Y*9C*C16 FC/MC/PC48C 1.00 0.98 1.03 Y*9C*C16 FC/MC/PC48D 1.00 0.98 1.03 Y*9C*C16 FC/MC/PC60D 1.00 0.97 1.03 Y*9C*C16 FC/MC62D 0.99 0.98 1.04 Y*9C*C16 FC/PC60C 1.00 0.97 1.03 Y*9C*C16 FC64D 1.04 1.04 1.00 Y*9C*C16 UC48C 1.00 0.98 1.03 Y*9C*C16 UC60C 0.97 0.95 1.02 Y*9C*C20 FC/MC/PC48C 1.00 0.98 1.03 Y*9C*C20 FC/MC/PC48D 1.00 0.98 1.03 Y*9C*C20 FC/MC/PC60D 1.00 0.97 1.03 Y*9C*C20 FC/MC62D 0.99 0.98 1.04 Y*9C*C20 FC/PC60C 1.00 0.97 1.03 Y*9C*C20 FC64D 1.04 1.04 1.00 Y*9C*C20 UC48C 1.00 0.98 1.06 Y*9C*C20 UC60C 0.99 0.97 1.06 Y*9C*D20 FC/MC/PC48D 1.00 0.98 1.03 Y*9C*D20 FC/MC/PC60D 1.00 0.97 1.03 Y*9C*D20 FC/MC62D 1.00 1.00 1.06 Y*9C*D20 FC64D 1.04 1.04 1.00 Y*9C*D20 UC48D 1.00 0.98 1.06
Y*9C*D20 UC60D 0.99 0.97 1.06
64 Johnson Controls Unitary Products
Page 65
1109431-YTG-A-0714
COOLING PERFORMANCE DATA - HIGH CFM 2-STAGE OPERATION
OUTDOOR UNIT MODEL NO. YZH04812C INDOOR COIL MODEL NO. FC/MC62D + MV20D
AIR TEMP.
ENTERING
OUTDOOR UNIT (°F)
65
75
85
95
105
115
125
NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
HIGH CFM
Air Handler Coil T.C. S.C. KW
– FC/MC62 0.98 0.96 1.06 AHE60D – 0.99 0.97 0.99 AHV48D – 0.99 0.95 1.03 AHV60D – 0.99 0.97 1.03 MV16C FC/MC48C 0.99 0.96 1.03 MV16C FC60C 0.99 0.96 1.03 MV20D FC/MC48D 0.99 0.97 1.01 MV20D FC/MC60D 0.99 0.96 1.03 MV20D FC/MC62D 1.00 1.00 1.00 MV20D FC64D 1.02 1.02 1.02 MX16CN21 FC/MC48C 0.98 0.96 1.02 MX16CN21 FC60C 0.99 0.96 1.03
Continued on next page.
ID CFM 1550 1650 1750
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
T.C. 47.9 50.0 49.1 54.0 58.5 49.5 49.9 49.7 54.3 59.0 51.0 49.9 50.3 54.7 59.4 S.C. 46.5 43.1 36.3 36.8 28.5 47.0 44.1 37.2 37.3 29.0 47.5 45.1 38.0 37.8 29.4 KW 2.56 2.57 2.60 2.62 2.65 2.63 2.64 2.66 2.68 2.71 2.71 2.72 2.72 2.75 2.78 T.C. 46.3 47.8 46.9 51.3 55.7 47.3 47.8 47.2 51.6 56.2 48.4 47.9 47.5 51.8 56.6 S.C. 44.8 42.3 35.4 35.7 27.6 45.2 43.2 36.2 36.4 28.2 45.7 44.1 37.0 37.0 28.7 KW 2.89 2.90 2.93 2.95 2.98 2.96 2.97 2.98 3.01 3.04 3.04 3.05 3.05 3.09 3.11 T.C. 44.6 45.6 44.7 48.5 53.0 45.2 45.7 44.7 48.8 53.4 45.8 45.8 44.7 49.0 53.8 S.C. 43.0 41.5 34.5 34.6 26.6 43.4 42.3 35.3 35.4 27.3 43.8 43.1 36.0 36.2 28.0 KW 3.22 3.23 3.26 3.28 3.31 3.29 3.30 3.31 3.35 3.36 3.37 3.38 3.38 3.42 3.43 T.C. 43.0 43.4 42.5 45.8 50.3 43.1 43.6 42.2 46.0 50.6 43.2 43.8 41.9 46.2 51.0 S.C. 41.2 40.6 33.7 33.6 25.6 41.6 41.4 34.3 34.5 26.5 42.0 42.1 34.9 35.4 27.4 KW 3.55 3.55 3.58 3.61 3.63 3.62 3.63 3.64 3.68 3.69 3.69 3.70 3.70 3.75 3.75 T.C. 40.6 40.7 39.6 42.9 46.8 40.8 41.1 39.5 42.8 47.3 40.9 41.5 39.4 42.8 47.8
S.C. 38.9 38.6 32.4 32.3 24.6 39.3 39.2 33.2 33.3 25.5 39.7 39.8 33.9 34.1 26.3
KW 4.04 4.03 4.05 4.09 4.11 4.11 4.11 4.11 4.15 4.16 4.17 4.18 4.18 4.22 4.22 T.C. 38.3 38.0 36.9 40.0 43.5 38.5 38.6 36.9 39.8 44.2 38.7 39.2 36.9 39.5 44.8 S.C. 36.6 36.6 31.2 31.2 23.7 37.0 37.1 32.1 32.1 24.5 37.4 37.5 32.9 32.9 25.4
KW 4.52 4.50 4.51 4.55 4.57 4.58 4.57 4.57 4.61 4.62 4.64 4.65 4.64 4.67 4.68 T.C. 36.1 35.4 34.1 37.1 40.1 36.3 36.2 34.3 36.7 41.0 36.4 36.9 34.5 36.2 41.8 S.C. 34.3 34.6 30.0 30.0 22.7 34.7 34.9 31.0 30.9 23.6 35.1 35.2 31.9 31.7 24.4
KW 5.00 4.97 4.97 5.01 5.03 5.05 5.04 5.03 5.06 5.08 5.11 5.12 5.10 5.13 5.13
Johnson Controls Unitary Products 65
Page 66
1109431-YTG-A-0714
Furnace Coil T.C. S.C. KW
T*(8,L)V*C16 FC/MC/PC48C 0.97 0.93 1.07 T*(8,L)V*C16 FC/MC/PC48D 0.97 0.93 1.07 T*(8,L)V*C16 FC/MC/PC60D 0.98 0.96 1.06 T*(8,L)V*C16 FC/MC62D 0.99 0.99 1.05 T*(8,L)V*C16 FC/PC60C 0.98 0.96 1.06 T*(8,L)V*C16 FC64D 1.01 1.01 1.05 T*(8,L)V*C16 UC48C 0.98 0.96 1.06 T*(8,L)V*C16 UC60C 0.98 0.95 1.04 T*(8,L)V*C20 FC/MC/PC48C 0.98 0.96 1.06 T*(8,L)V*C20 FC/MC/PC48D 0.98 0.96 1.06 T*(8,L)V*C20 FC/MC/PC60D 0.99 0.96 1.05 T*(8,L)V*C20 FC/MC62D 0.99 0.98 1.03 T*(8,L)V*C20 FC/PC60C 0.99 0.96 1.05 T*(8,L)V*C20 FC64D 1.02 1.01 1.04 T*(8,L)V*C20 UC48C 0.99 0.96 1.08 T*(8,L)V*C20 UC60C 0.98 0.95 1.02 T*9V*C16 FC/MC/PC48C 0.98 0.96 1.06 T*9V*C16 FC/MC/PC48D 0.98 0.96 1.06 T*9V*C16 FC/MC/PC60D 0.98 0.96 1.06 T*9V*C16 FC/MC62D 0.99 0.97 1.05 T*9V*C16 FC/PC60C 0.98 0.96 1.06 T*9V*C16 FC64D 1.01 1.01 1.05 T*9V*C16 UC48C 0.97 0.93 1.05 T*9V*C16 UC60C 0.97 0.92 1.05 T*9V*C20 FC/MC/PC48C 0.98 0.96 1.06 T*9V*C20 FC/MC/PC48D 0.98 0.96 1.06 T*9V*C20 FC/MC/PC60D 0.98 0.96 1.06 T*9V*C20 FC/MC62D 0.99 0.98 1.08 T*9V*C20 FC/PC60C 0.98 0.96 1.06 T*9V*C20 FC64D 1.01 1.01 1.08 T*9V*C20 UC48C 0.99 0.96 1.08 T*9V*C20 UC60C 0.98 0.96 1.06 T*9V*D20 FC/MC/PC48D 0.98 0.96 1.06 T*9V*D20 FC/MC/PC60D 0.98 0.96 1.04 T*9V*D20 FC/MC62D 0.99 0.98 1.05 T*9V*D20 FC64D 1.01 1.01 1.05 T*9V*D20 UC48D 0.99 0.96 1.08 T*9V*D20 UC60D 0.98 0.94 1.06 TM8X080C16MP11 FC/MC/PC48C 0.97 0.93 1.05 TM8X080C16MP11 FC/MC/PC48D 0.98 0.96 1.04 TM8X080C16MP11 FC/MC/PC60D 0.99 0.96 1.05 TM8X080C16MP11 FC/MC62D 0.99 0.96 1.05 TM8X080C16MP11 FC/PC60C 0.97 0.93 1.05 TM8X080C16MP11 FC64D 1.01 1.01 1.05 TM8X080C16MP11 UC48C 0.98 0.93 1.06 TM8X080C16MP11 UC48D 0.98 0.93 1.06 TM8X080C16MP11 UC60C 0.97 0.92 1.05 TM8X080C16MP11 UC60D 0.97 0.92 1.05 TM8X100C16MP11 FC/MC/PC48C 0.97 0.93 1.05 TM8X100C16MP11 FC/MC/PC48D 0.98 0.96 1.04 TM8X100C16MP11 FC/MC/PC60D 0.99 0.96 1.05 TM8X100C16MP11 FC/MC62D 0.99 0.96 1.05 TM8X100C16MP11 FC/PC60C 0.97 0.93 1.05 TM8X100C16MP11 FC64D 1.01 1.01 1.05 TM8X100C16MP11 UC48C 0.98 0.93 1.06 TM8X100C16MP11 UC48D 0.98 0.93 1.06
Furnace Coil T.C. S.C. KW
TM8X100C16MP11 UC60C 0.97 0.92 1.05 TM8X100C16MP11 UC60D 0.97 0.92 1.05 TM8X100C20MP11 FC/MC/PC48C 0.98 0.94 1.04 TM8X100C20MP11 FC/MC/PC48D 0.98 0.94 1.04 TM8X100C20MP11 FC/MC/PC60D 0.98 0.94 1.04 TM8X100C20MP11 FC/MC62D 0.99 0.96 1.05 TM8X100C20MP11 FC/PC60C 0.99 0.96 1.05 TM8X100C20MP11 UC48C 0.98 0.94 1.04 TM8X100C20MP11 UC48D 0.98 0.95 1.04 TM8X100C20MP11 UC60C 0.97 0.93 1.03 TM8X100C20MP11 UC60D 0.98 0.94 1.04 TM8X120C20MP11 FC/MC/PC48C 0.98 0.94 1.04 TM8X120C20MP11 FC/MC/PC48D 0.98 0.94 1.04 TM8X120C20MP11 FC/MC/PC60D 0.98 0.94 1.04 TM8X120C20MP11 FC/MC62D 0.99 0.96 1.05 TM8X120C20MP11 FC/PC60C 0.99 0.96 1.05 TM8X120C20MP11 UC48C 0.98 0.94 1.04 TM8X120C20MP11 UC48D 0.98 0.95 1.04 TM8X120C20MP11 UC60C 0.97 0.93 1.03 TM8X120C20MP11 UC60D 0.98 0.94 1.04 TMLX080C16MP11 FC/MC/PC48C 0.97 0.93 1.05 TMLX080C16MP11 FC/MC/PC48D 0.98 0.96 1.04 TMLX080C16MP11 FC/MC/PC60D 0.99 0.96 1.05 TMLX080C16MP11 FC/MC62D 0.99 0.96 1.05 TMLX080C16MP11 FC/PC60C 0.97 0.93 1.05 TMLX080C16MP11 FC64D 1.01 1.01 1.05 TMLX080C16MP11 UC48C 0.98 0.93 1.06 TMLX080C16MP11 UC48D 0.98 0.93 1.06 TMLX080C16MP11 UC60C 0.97 0.92 1.05 TMLX080C16MP11 UC60D 0.97 0.92 1.05 TMLX100C16MP11 FC/MC/PC48C 0.97 0.93 1.05 TMLX100C16MP11 FC/MC/PC48D 0.98 0.96 1.04 TMLX100C16MP11 FC/MC/PC60D 0.99 0.96 1.05 TMLX100C16MP11 FC/MC62D 0.99 0.96 1.05 TMLX100C16MP11 FC/PC60C 0.97 0.93 1.05 TMLX100C16MP11 FC64D 1.01 1.01 1.05 TMLX100C16MP11 UC48C 0.98 0.93 1.06 TMLX100C16MP11 UC48D 0.98 0.93 1.06 TMLX100C16MP11 UC60C 0.97 0.92 1.05 TMLX100C16MP11 UC60D 0.97 0.92 1.05 TMLX100C20MP11 FC/MC/PC48C 0.98 0.94 1.04 TMLX100C20MP11 FC/MC/PC48D 0.98 0.94 1.04 TMLX100C20MP11 FC/MC/PC60D 0.98 0.94 1.04 TMLX100C20MP11 FC/MC62D 0.99 0.96 1.05 TMLX100C20MP11 FC/PC60C 0.99 0.96 1.05 TMLX100C20MP11 UC48C 0.98 0.94 1.04 TMLX100C20MP11 UC48D 0.98 0.95 1.04 TMLX100C20MP11 UC60C 0.97 0.93 1.03 TMLX100C20MP11 UC60D 0.98 0.94 1.04 TMLX120C20MP11 FC/MC/PC48C 0.98 0.94 1.04 TMLX120C20MP11 FC/MC/PC48D 0.98 0.94 1.04 TMLX120C20MP11 FC/MC/PC60D 0.98 0.94 1.04 TMLX120C20MP11 FC/MC62D 0.99 0.96 1.05 TMLX120C20MP11 FC/PC60C 0.99 0.96 1.05 TMLX120C20MP11 UC48C 0.98 0.94 1.04
Continued on next page.
66 Johnson Controls Unitary Products
Page 67
1109431-YTG-A-0714
Furnace Coil T.C. S.C. KW
TMLX120C20MP11 U C48D 0.98 0.95 1.04 TMLX120C20MP11 U C60C 0.97 0.93 1.03 TMLX120C20MP11 U C60D 0.98 0.94 1.04 TM9E100C20MP11 FC/MC/PC48C 0.97 0.92 1.05 TM9E100C20MP11 FC/MC/PC48D 0.97 0.93 1.05 TM9E100C20MP11 FC/MC/PC60D 0.97 0.93 1.05 TM9E100C20MP11 FC/MC62D 0.99 0.96 1.05 TM9E100C20MP11 FC64D 1.00 0.98 1.04 TM9E100C20MP11 U C48C 0.97 0.92 1.05 TM9E100C20MP11 U C48D 0.98 0.93 1.06 TM9E100C20MP11 U C60D 0.97 0.92 1.05 TM9E120D20MP11 FC/MC/PC48D 0.97 0.93 1.05 TM9E120D20MP11 FC/MC/PC60D 0.98 0.93 1.04 TM9E120D20MP11 FC/MC62D 0.99 0.96 1.05 TM9E120D20MP11 FC64D 1.00 0.98 1.04 TM9E120D20MP11 U C48D 0.98 0.93 1.04 TM9E120D20MP11 U C60D 0.97 0.92 1.03 TM9X100C20MP11 FC/MC/PC48C 0.97 0.92 1.05 TM9X100C20MP11 FC/MC/PC48D 0.97 0.93 1.05 TM9X100C20MP11 FC/MC/PC60D 0.97 0.93 1.05 TM9X100C20MP11 FC/MC62D 0.99 0.96 1.05 TM9X100C20MP11 FC64D 1.00 0.98 1.04 TM9X100C20MP11 U C48C 0.97 0.92 1.05 TM9X100C20MP11 U C48D 0.98 0.93 1.06 TM9X100C20MP11 U C60D 0.97 0.92 1.05 TM9X120D20MP11 FC/MC/PC48D 0.97 0.93 1.05 TM9X120D20MP11 FC/MC/PC60D 0.98 0.93 1.04 TM9X120D20MP11 FC/MC62D 0.99 0.96 1.05 TM9X120D20MP11 FC64D 1.00 0.98 1.04 TM9X120D20MP11 U C48D 0.98 0.93 1.04 TM9X120D20MP11 U C60D 0.97 0.92 1.03 Y*LC*C16 FC/MC/PC48C 0.97 0.93 1.07 Y*LC*C16 FC/MC/PC48D 0.97 0.93 1.07 Y*LC*C16 FC/MC/PC60D 0.98 0.96 1.06 Y*LC*C16 FC/MC62D 0.99 0.99 1.05 Y*LC*C16 FC/PC60C 0.98 0.96 1.06
Furnace Coil T.C. S.C. KW
Y*LC*C16 FC64D 1.01 1.01 1.05 Y*LC*C16 UC48C 0.98 0.96 1.06 Y*LC*C16 UC60C 0.98 0.95 1.04 Y*LC*C20 FC/MC/PC48C 0.98 0.96 1.06 Y*LC*C20 FC/MC/PC48D 0.98 0.96 1.06 Y*LC*C20 FC/MC/PC60D 0.99 0.96 1.05 Y*LC*C20 FC/MC62D 0.99 0.98 1.03 Y*LC*C20 FC/PC60C 0.99 0.96 1.05 Y*LC*C20 FC64D 1.02 1.01 1.04 Y*LC*C20 UC48C 0.99 0.96 1.08 Y*LC*C20 UC60C 0.98 0.95 1.02 Y*9C*C16 FC/MC/PC48C 0.98 0.96 1.06 Y*9C*C16 FC/MC/PC48D 0.98 0.96 1.06 Y*9C*C16 FC/MC/PC60D 0.98 0.96 1.06 Y*9C*C16 FC/MC62D 0.99 0.97 1.05 Y*9C*C16 FC/PC60C 0.98 0.96 1.06 Y*9C*C16 FC64D 1.01 1.01 1.05 Y*9C*C16 UC48C 0.97 0.93 1.05 Y*9C*C16 UC60C 0.97 0.92 1.05 Y*9C*C20 FC/MC/PC48C 0.98 0.96 1.06 Y*9C*C20 FC/MC/PC48D 0.98 0.96 1.06 Y*9C*C20 FC/MC/PC60D 0.98 0.96 1.06 Y*9C*C20 FC/MC62D 0.99 0.98 1.08 Y*9C*C20 FC/PC60C 0.98 0.96 1.06 Y*9C*C20 FC64D 1.01 1.01 1.08 Y*9C*C20 UC48C 0.99 0.96 1.08 Y*9C*C20 UC60C 0.98 0.96 1.06 Y*9C*D20 FC/MC/PC48D 0.98 0.96 1.06 Y*9C*D20 FC/MC/PC60D 0.98 0.96 1.04 Y*9C*D20 FC/MC62D 0.99 0.98 1.05 Y*9C*D20 FC64D 1.01 1.01 1.05 Y*9C*D20 UC48D 0.99 0.96 1.08 Y*9C*D20 UC60D 0.98 0.94 1.06
Johnson Controls Unitary Products 67
Page 68
1109431-YTG-A-0714
COOLING PERFORMANCE DATA - LOW CFM 1-STAGE OPERATION
OUTDOOR UNIT MODEL NO. YZH06012C INDOOR COIL MODEL NO. FC/MC62D + MV20D
AIR TEMP.
ENTERING
OUTDOOR UNIT (°F)
65
75
85
95
105
115
125
NOTE: ALL CAPACI TIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
ID CFM 1125 1175 1225
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
T.C. 37.7 42.7 43.0 46.8 51.0 38.2 43.4 43.2 47.0 51.5 38.7 44.1 43.4 47.3 52.1 S.C. 37.5 35.6 30.7 30.1 24.7 38.0 36.2 31.3 30.6 25.0 38.5 36.8 31.8 31.0 25.3
K.W. 2.08 2.05 2.05 2.03 2.04 2.09 2.07 2.06 2.05 2.05 2.10 2.08 2.08 2.07 2.07
T.C. 35.9 40.7 40.8 44.7 48.7 36.3 41.4 41.0 45.1 49.2 36.7 42.0 41.3 45.4 49.6 S.C. 35.8 34.8 29.7 29.3 23.8 36.2 35.5 30.3 29.8 24.1 36.6 36.2 30.8 30.3 24.4
K.W. 2.43 2.41 2.41 2.39 2.40 2.44 2.43 2.43 2.41 2.42 2.45 2.44 2.44 2.43 2.43
T.C. 34.2 38.7 38.6 42.7 46.4 34.5 39.3 38.9 43.1 46.8 34.8 39.9 39.2 43.4 47.1 S.C. 34.0 33.9 28.7 28.6 22.8 34.3 34.7 29.3 29.1 23.1 34.7 35.6 29.8 29.6 23.4
K.W. 2.78 2.77 2.77 2.76 2.76 2.79 2.78 2.79 2.77 2.78 2.81 2.80 2.80 2.79 2.79
T.C. 32.4 36.7 36.3 40.7 44.1 32.6 37.3 36.7 41.1 44.4 32.9 37.9 37.1 41.5 44.6 S.C. 32.2 33.0 27.7 27.8 21.9 32.5 34.0 28.3 28.4 22.2 32.7 35.0 28.8 28.9 22.5
K.W. 3.13 3.12 3.13 3.12 3.12 3.15 3.14 3.15 3.14 3.14 3.16 3.16 3.16 3.15 3.15
T.C. 29.8 34.0 33.7 37.4 41.5 30.0 34.4 34.1 37.9 41.8 30.1 34.8 34.6 38.5 42.1 S.C. 29.7 31.4 26.2 26.3 20.7 29.8 32.1 26.7 27.0 21.0 30.0 32.8 27.2 27.7 21.3
K.W. 3.60 3.60 3.60 3.58 3.59 3.61 3.62 3.62 3.60 3.60 3.63 3.64 3.64 3.63 3.62
T.C. 27.3 31.2 31.2 34.1 38.9 27.3 31.5 31.6 34.8 39.2 27.4 31.7 32.1 35.5 39.6 S.C. 27.2 29.8 24.7 24.8 19.6 27.2 30.3 25.1 25.7 19.9 27.3 30.7 25.6 26.5 20.2
K.W. 4.06 4.06 4.05 4.03 4.04 4.07 4.08 4.08 4.06 4.06 4.08 4.10 4.10 4.09 4.07
T.C. 24.8 28.5 28.6 30.9 36.3 24.7 28.6 29.1 31.7 36.7 24.7 28.7 29.5 32.6 37.0 S.C. 24.7 28.2 23.2 23.3 18.5 24.6 28.4 23.6 24.3 18.8 24.6 28.6 24.0 25.4 19.1
K.W. 4.52 4.52 4.51 4.48 4.50 4.52 4.54 4.53 4.51 4.51 4.53 4.56 4.56 4.55 4.53
LOW CFM
Air Handler Coil T.C. S.C. KW
– FC/MC62 1.00 1.03 1.16 AHE60D – 0.99 0.98 1.01 AHV60D – 0.98 0.96 1.00 MV20D FC/MC60D 1.00 0.97 1.02 MV20D FC/MC62D 1.00 1.00 1.00 MV20D FC64D 1.03 1.02 1.01
Continued on next page.
68 Johnson Controls Unitary Products
Page 69
1109431-YTG-A-0714
Furnace Coil T.C. S.C. KW
T*(8,L)V*C16 FC/PC60C 0.97 0.92 1.03 T*(8,L)V*C20 FC/MC/PC60D 0.98 0.93 1.03 T*(8,L)V*C20 FC/MC62D 0.96 0.92 1.03 T*(8,L)V*C20 FC/PC60C 0.98 0.93 1.03 T*(8,L)V*C20 FC64D 1.01 0.98 1.02 T*(8,L)V*C20 UC60C 0.95 0.91 1.01 T*9V*C20 FC/MC/PC6 0D 0.97 0.93 1.03 T*9V*C20 FC/MC62D 0.97 0.93 1.03 T*9V*C20 FC/PC60C 0.97 0.93 1.03 T*9V*C20 FC64D 1.00 0.97 1.02 T*9V*C20 UC60C 0.96 0.92 1.03 T*9V*D20 FC/MC/PC6 0D 0.98 0.94 1.04 T*9V*D20 FC/MC62D 0.97 0.95 1.03 T*9V*D20 FC64D 1.01 0.99 1.02 T*9V*D20 UC60D 0.96 0.93 1.03 TM8X080C16MP11 FC/MC/PC60D 0.98 0.93 1.01 TM8X080C16MP11 FC/MC62D 0.97 0.93 1.00 TM8X080C16MP11 FC/PC60C 0.97 0.92 1.02 TM8X080C16MP11 FC64D 1.01 0.97 1.00 TM8X080C16MP11 U C60C 0.96 0.91 1.02 TM8X080C16MP11 U C60D 0.96 0.91 1.02 TM8X100C16MP11 FC/MC/PC60D 0.98 0.93 1.01 TM8X100C16MP11 FC/MC62D 0.97 0.93 1.00 TM8X100C16MP11 FC/PC60C 0.97 0.92 1.02 TM8X100C16MP11 FC64D 1.01 0.97 1.00 TM8X100C16MP11 U C60C 0.96 0.91 1.02 TM8X100C16MP11 U C60D 0.96 0.91 1.02 TM8X100C20MP11 FC/MC/PC60D 0.99 0.95 1.01 TM8X100C20MP11 FC/MC62D 0.98 0.96 1.01 TM8X100C20MP11 FC/PC60C 0.98 0.95 1.01 TM8X100C20MP11 U C60C 0.97 0.93 1.03 TM8X100C20MP11 U C60D 0.97 0.94 1.02 TM8X120C20MP11 FC/MC/PC60D 0.99 0.95 1.01 TM8X120C20MP11 FC/MC62D 0.98 0.96 1.01 TM8X120C20MP11 FC/PC60C 0.98 0.95 1.01 TM8X120C20MP11 U C60C 0.97 0.93 1.03 TM8X120C20MP11 U C60D 0.97 0.94 1.02 TMLX080C16MP11 FC/MC/PC60D 0.98 0.93 1.01 TMLX080C16MP11 FC/MC62D 0.97 0.93 1.00 TMLX080C16MP11 FC/PC60C 0.97 0.92 1.02 TMLX080C16MP11 FC64D 1.01 0.97 1.00 TMLX080C16MP11 U C60C 0.96 0.91 1.02 TMLX080C16MP11 U C60D 0.96 0.91 1.02 TMLX100C16MP11 FC/MC/PC60D 0.98 0.93 1.01 TMLX100C16MP11 FC/MC62D 0.97 0.93 1.00
Furnace Coil T.C. S.C. KW
TMLX100C16MP11 FC/PC60C 0.97 0.92 1.02 TMLX100C16MP11 FC64D 1.01 0.97 1.00 TMLX100C16MP11 UC60C 0.96 0.91 1.02 TMLX100C16MP11 UC60D 0.96 0.91 1.02 TMLX100C20MP11 FC/MC/PC60D 0.99 0.95 1.01 TMLX100C20MP11 FC/MC62D 0.98 0.96 1.01 TMLX100C20MP11 FC/PC60C 0.98 0.95 1.01 TMLX100C20MP11 UC60C 0.97 0.93 1.03 TMLX100C20MP11 UC60D 0.97 0.94 1.02 TMLX120C20MP11 FC/MC/PC60D 0.99 0.95 1.01 TMLX120C20MP11 FC/MC62D 0.98 0.96 1.01 TMLX120C20MP11 FC/PC60C 0.98 0.95 1.01 TMLX120C20MP11 UC60C 0.97 0.93 1.03 TMLX120C20MP11 UC60D 0.97 0.94 1.02 TM9E100C20MP11 FC/MC/PC60D 0.96 0.90 1.00 TM9E100C20MP11 FC/MC62D 0.96 0.91 1.00 TM9E100C20MP11 FC64D 0.99 0.95 0.99 TM9E100C20MP11 UC60D 0.94 0.89 1.01 TM9E120D20MP11 FC/MC/PC60D 0.96 0.91 0.99 TM9E120D20MP11 FC/MC62D 0.96 0.91 1.00 TM9E120D20MP11 FC64D 0.99 0.94 1.00 TM9E120D20MP11 UC60D 0.96 0.91 1.02 TM9X100C20MP11 FC/MC/PC60D 0.96 0.90 1.00 TM9X100C20MP11 FC/MC62D 0.96 0.91 1.00 TM9X100C20MP11 FC64D 0.99 0.95 0.99 TM9X100C20MP11 UC60D 0.94 0.89 1.01 TM9X120D20MP11 FC/MC/PC60D 0.96 0.91 0.99 TM9X120D20MP11 FC/MC62D 0.96 0.91 1.00 TM9X120D20MP11 FC64D 0.99 0.94 1.00 TM9X120D20MP11 UC60D 0.96 0.91 1.02 Y*LC*C16 FC/PC60C 0.97 0.92 1.03 Y*LC*C20 FC/MC/PC60D 0.98 0.93 1.03 Y*LC*C20 FC/MC62D 0.96 0.92 1.03 Y*LC*C20 FC/PC60C 0.98 0.93 1.03 Y*LC*C20 FC64D 1.01 0.98 1.02 Y*LC*C20 UC60C 0.95 0.91 1.01 Y*9C*C20 FC/MC/PC60D 0.97 0.93 1.03 Y*9C*C20 FC/MC62D 0.97 0.93 1.03 Y*9C*C20 FC/PC60C 0.97 0.93 1.03 Y*9C*C20 FC64D 1.00 0.97 1.02 Y*9C*C20 UC60C 0.96 0.92 1.03 Y*9C*D20 FC/MC/PC60D 0.98 0.94 1.04 Y*9C*D20 FC/MC62D 0.97 0.95 1.03 Y*9C*D20 FC64D 1.01 0.99 1.02 Y*9C*D20 UC60D 0.96 0.93 1.03
Johnson Controls Unitary Products 69
Page 70
1109431-YTG-A-0714
COOLING PERFORMANCE DATA - HIGH CFM 2-STAGE OPERATION
OUTDOOR UNIT MODEL NO. YZH06012C INDOOR COIL MODEL NO. FC/MC62D + MV20D
AIR TEMP.
ENTERING
OUTDOOR UNIT (°F)
65
75
85
95
105
115
125
NOTE: ALL CAPACI TIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
ID CFM 1750 1850 1950
ID DB (°F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
ID WB (°F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
T.C. 54.7 60.1 58.8 64.1 66.9 55.5 61.1 59.5 64.7 67.8 56.3 62.1 60.1 65.4 68.5 S.C. 54.2 50.7 43.1 42.4 33.8 55.1 52.1 44.2 43.4 34.5 55.9 53.5 45.3 44.3 35.1
K.W. 3.37 3.42 3.43 3.49 3.62 3.46 3.51 3.50 3.57 3.70 3.55 3.60 3.59 3.66 3.79
T.C. 52.7 57.7 56.6 61.5 63.5 53.4 58.6 57.2 62.2 64.0 54.0 59.5 57.8 62.8 64.4 S.C. 52.2 49.9 42.1 41.5 32.9 52.9 51.2 43.2 42.4 33.4 53.6 52.5 44.2 43.3 33.9
K.W. 3.81 3.85 3.85 3.91 4.03 3.89 3.93 3.92 3.99 4.11 3.99 4. 02 4.01 4.08 4.20
T.C. 50.6 55.3 54.4 58.9 60.1 51.2 56.1 54.9 59.6 60.2 51.7 56.9 55.4 60.2 60.3 S.C. 50.2 49.1 41.1 40.5 31.9 50.8 50.3 42.1 41.4 32.3 51.3 51.5 43.1 42.3 32.7
K.W. 4.24 4.27 4.26 4.33 4.44 4.33 4.35 4.34 4.41 4.52 4.42 4.44 4.43 4.50 4.61
T.C. 48.6 53.0 52.3 56.3 56.6 49.0 53.6 52.6 57.0 56.4 49.4 54.2 53.0 57.7 56.2 S.C. 48.2 48.3 40.1 39.6 31.0 48.6 49.4 41.1 40.5 31.2 49.0 50.5 42.0 41.3 31.5
K.W. 4.68 4.69 4.68 4.75 4.86 4.76 4.77 4.76 4.83 4.93 4.85 4.85 4.85 4.92 5.02
T.C. 45.8 49.9 49.2 53.1 52.6 45.9 50.4 49.6 53.7 52.3 46.0 50.8 49.9 54.3 52.0 S.C. 45.4 46.6 38.6 38.3 29.5 45.5 47.4 39.5 39.2 29.9 45.6 48.2 40.3 40.0 30.2
K.W. 5.29 5.29 5.28 5.35 5.45 5.37 5.36 5.36 5.42 5.52 5.46 5.45 5.45 5.51 5.61
T.C. 43.1 47.0 46.2 49.9 48.7 42.9 47.2 46.6 50.5 48.3 42.7 47.4 47.0 50.9 47.8 S.C. 42.7 45.0 37.1 37.0 28.1 42.5 45.5 37.9 37.9 28.5 42.4 46.0 38.7 38.7 28.9
K.W. 5.87 5.86 5.85 5.93 6.02 5.95 5.94 5.93 6.00 6.10 6.04 6.03 6.02 6.08 6.18
T.C. 40.3 44.1 43.2 46.8 44.9 39.9 44.1 43.6 47.2 44.3 39.4 44.1 44.0 47.6 43.7 S.C. 40.0 43.4 35.6 35.8 26.7 39.6 43.6 36.3 36.6 27.2 39.1 43.7 37.0 37.4 27.7
K.W. 6.46 6.44 6.43 6.51 6.60 6.54 6.52 6.51 6.58 6.68 6.63 6.61 6.60 6.66 6.76
Multipliers for determining the performance with other indoor sections.
NOTE: For dry bulb temperatures different than those listed (between 73-87 °F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed
temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.
HIGH CFM
Air Handler Coil T.C. S.C. KW
– FC/MC62 0.98 0.98 1.05 AHE60D – 1.00 1.00 1.02 AHV60D – 0.98 0.94 1.00 MV20D FC/MC60D 0.99 0.96 1.01 MV20D FC/MC62D 1.00 1.00 1.00 MV20D FC64D 1.02 1.02 1.04
Continued on next page.
70 Johnson Controls Unitary Products
Page 71
1109431-YTG-A-0714
Furnace Coil T.C. S.C. KW
T*(8,L)V*C16 FC/PC60C 0.96 0.90 1.03 T*(8,L)V*C20 FC/MC/PC60D 0.96 0.91 1.01 T*(8,L)V*C20 FC/MC62D 0.97 0.93 1.02 T*(8,L)V*C20 FC/PC60C 0.96 0.91 1.01 T*(8,L)V*C20 FC64D 1.02 1.01 1.06 T*(8,L)V*C20 UC60C 0.96 0.91 1.01 T*9V*C20 FC/MC/PC6 0D 0.97 0.92 1.02 T*9V*C20 FC/MC62D 0.98 0.94 1.03 T*9V*C20 FC/PC60C 0.97 0.92 1.02 T*9V*C20 FC64D 1.00 0.96 1.04 T*9V*C20 UC60C 0.96 0.91 1.03 T*9V*D20 FC/MC/PC6 0D 0.96 0.91 1.03 T*9V*D20 FC/MC62D 0.97 0.94 1.02 T*9V*D20 FC64D 1.00 0.96 1.02 T*9V*D20 UC60D 0.96 0.91 1.03 TM8X080C16MP11 FC/MC/PC60D 0.96 0.89 1.03 TM8X080C16MP11 FC/MC62D 0.96 0.92 1.01 TM8X080C16MP11 FC/PC60C 0.96 0.88 1.02 TM8X080C16MP11 FC64D 0.99 0.94 1.01 TM8X080C16MP11 U C60C 0.95 0.88 1.01 TM8X080C16MP11 U C60D 0.95 0.88 1.01 TM8X100C16MP11 FC/MC/PC60D 0.96 0.89 1.03 TM8X100C16MP11 FC/MC62D 0.96 0.92 1.01 TM8X100C16MP11 FC/PC60C 0.96 0.88 1.02 TM8X100C16MP11 FC64D 0.99 0.94 1.01 TM8X100C16MP11 U C60C 0.95 0.88 1.01 TM8X100C16MP11 U C60D 0.95 0.88 1.01 TM8X100C20MP11 FC/MC/PC60D 0.96 0.90 1.01 TM8X100C20MP11 FC/MC62D 0.97 0.93 1.02 TM8X100C20MP11 FC/PC60C 0.96 0.90 1.01 TM8X100C20MP11 U C60C 0.96 0.89 1.02 TM8X100C20MP11 U C60D 0.96 0.90 1.00 TM8X120C20MP11 FC/MC/PC60D 0.96 0.90 1.01 TM8X120C20MP11 FC/MC62D 0.97 0.93 1.02 TM8X120C20MP11 FC/PC60C 0.96 0.90 1.01 TM8X120C20MP11 U C60C 0.96 0.89 1.02 TM8X120C20MP11 U C60D 0.96 0.90 1.00 TMLX080C16MP11 FC/MC/PC60D 0.96 0.89 1.03 TMLX080C16MP11 FC/MC62D 0.96 0.92 1.01 TMLX080C16MP11 FC/PC60C 0.96 0.88 1.02 TMLX080C16MP11 FC64D 0.99 0.94 1.01 TMLX080C16MP11 U C60C 0.95 0.88 1.01 TMLX080C16MP11 U C60D 0.95 0.88 1.01 TMLX100C16MP11 FC/MC/PC60D 0.96 0.89 1.03 TMLX100C16MP11 FC/MC62D 0.96 0.92 1.01
Furnace Coil T.C. S.C. KW
TMLX100C16MP11 FC/PC60C 0.96 0.88 1.02 TMLX100C16MP11 FC64D 0.99 0.94 1.01 TMLX100C16MP11 UC60C 0.95 0.88 1.01 TMLX100C16MP11 UC60D 0.95 0.88 1.01 TMLX100C20MP11 FC/MC/PC60D 0.96 0.90 1.01 TMLX100C20MP11 FC/MC62D 0.97 0.93 1.02 TMLX100C20MP11 FC/PC60C 0.96 0.90 1.01 TMLX100C20MP11 UC60C 0.96 0.89 1.02 TMLX100C20MP11 UC60D 0.96 0.90 1.00 TMLX120C20MP11 FC/MC/PC60D 0.96 0.90 1.01 TMLX120C20MP11 FC/MC62D 0.97 0.93 1.02 TMLX120C20MP11 FC/PC60C 0.96 0.90 1.01 TMLX120C20MP11 UC60C 0.96 0.89 1.02 TMLX120C20MP11 UC60D 0.96 0.90 1.00 TM9E100C20MP11 FC/MC/PC60D 0.96 0.88 1.02 TM9E100C20MP11 FC/MC62D 0.96 0.92 1.01 TM9E100C20MP11 FC64D 0.99 0.94 1.01 TM9E100C20MP11 UC60D 0.95 0.88 1.01 TM9E120D20MP11 FC/MC/PC60D 0.96 0.89 1.01 TM9E120D20MP11 FC/MC62D 0.97 0.92 1.02 TM9E120D20MP11 FC64D 0.99 0.93 1.01 TM9E120D20MP11 UC60D 0.96 0.88 1.02 TM9X100C20MP11 FC/MC/PC60D 0.96 0.88 1.02 TM9X100C20MP11 FC/MC62D 0.96 0.92 1.01 TM9X100C20MP11 FC64D 0.99 0.94 1.01 TM9X100C20MP11 UC60D 0.95 0.88 1.01 TM9X120D20MP11 FC/MC/PC60D 0.96 0.89 1.01 TM9X120D20MP11 FC/MC62D 0.97 0.92 1.02 TM9X120D20MP11 FC64D 0.99 0.93 1.01 TM9X120D20MP11 UC60D 0.96 0.88 1.02 Y*LC*C16 FC/PC60C 0.96 0.90 1.03 Y*LC*C20 FC/MC/PC60D 0.96 0.91 1.01 Y*LC*C20 FC/MC62D 0.97 0.93 1.02 Y*LC*C20 FC/PC60C 0.96 0.91 1.01 Y*LC*C20 FC64D 1.02 1.01 1.06 Y*LC*C20 UC60C 0.96 0.91 1.01 Y*9C*C20 FC/MC/PC60D 0.97 0.92 1.02 Y*9C*C20 FC/MC62D 0.98 0.94 1.03 Y*9C*C20 FC/PC60C 0.97 0.92 1.02 Y*9C*C20 FC64D 1.00 0.96 1.04 Y*9C*C20 UC60C 0.96 0.91 1.03 Y*9C*D20 FC/MC/PC60D 0.96 0.91 1.03 Y*9C*D20 FC/MC62D 0.97 0.94 1.02 Y*9C*D20 FC64D 1.00 0.96 1.02 Y*9C*D20 UC60D 0.96 0.91 1.03
Johnson Controls Unitary Products 71
Page 72
1109431-YTG-A-0714
HEATING PERFORMANCE DATA - LOW CFM 1-STAGE OPERATION
CONDENSING UNIT MODEL NO. YZH02412C EVAPORATOR COIL MODEL NO. FC/MC48D + MV12D
AIR TEMP.
ENTERING
OUTDOOR UNIT (°F)
60
47
40
30
17
10
NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
AIR TEMP. ENTERING
INDOOR COIL (°F)
60 21.60 4.07 1.55 22.10 4.66 1.39 22.70 5.39 1.24 70 21.50 3.51 1.80 22.00 4.00 1.61 22.40 4.63 1.42 80 21.50 3.08 2.04 21.80 3.50 1.82 22.20 4.04 1.61 60 18.80 3.64 1.51 19.20 4.05 1.39 19.60 4.54 1.26 70 18.70 3.14 1.75 19.00 3.50 1.59 19.30 3.94 1.44 80 18.70 2.76 1.98 18.80 3.07 1.79 19.00 3.46 1.61 60 17.20 3.39 1.49 17.50 3.71 1.38 17.70 4.09 1.27 70 17.10 2.94 1.70 17.30 3.23 1.57 17.50 3.56 1.44 80 17.00 2.59 1.92 17.10 2.84 1.76 17.30 3.14 1.61 60 ––––––––– 70 ––––––––– 80 ––––––––– 60 ––––––––– 70 ––––––––– 80 ––––––––– 60 ––––––––– 70 ––––––––– 80 –––––––––
550 600 650
MBH COP KW MBH COP KW MBH COP KW
Multipliers for determining the performance with other indoor section.
ID CFM
LOW CFM
Air Handler Coil MBH COP KW
– FC/MC/PC48 1.04 0.93 1.12 AHV24B – 0.96 0.90 1.07 AHV30B – 0.99 0.91 1.08 AHV36C – 0.99 0.93 1.07 MV12B FC/MC43B 1.01 0.99 1.02 MV12D FC/MC48D 1.00 1.00 1.00 MV12D FC/MC60D 1.01 1.03 0.98
Furnace Coil MBH COP KW
T*(8,L)V*A12 FC/MC/PC37A 1.01 0.98 1.03 T*(8,L)V*B12 FC/MC/PC43B 1.01 0.93 1.09 T*(8,L)V*C16 FC/MC/PC43C 1.02 1.01 1.00 T*9V*A10 FC/MC/PC37A 1.01 0.95 1.06 T*9V*B12 FC/MC/PC43B 1.00 0.96 1.04 T*9V*C16 FC/MC/PC48C 1.01 1.02 0.98 T*9V*C16 FC/PC60C 1.01 1.03 0.98 T*9V*C16 UC48C 1.03 1.07 0.96 T*9V*C16 UC60C 1.01 1.03 0.98 T*9V*C20 FC/MC/PC43C 1.01 1.01 1.00 T*9V*C20 FC/MC/PC48C 1.01 1.02 0.98 T*9V*C20 UC48C 1.03 1.07 0.96 TM8X080C16MP11 FC/MC/PC43C 1.02 1.00 1.02 TM8X080C16MP11 FC/MC/PC48C 1.02 1.01 1.01 TM8X080C16MP11 FC/PC60C 1.02 1.01 1.00 TM8X080C16MP11 UC48C 1.03 1.06 0.97 TM8X080C16MP11 UC60C 1.02 1.01 1.00
Furnace Coil MBH COP KW
TM8X100C16MP11 FC/MC/PC43C 1.02 1.00 1.02 TM8X100C16MP11 FC/MC/PC48C 1.02 1.01 1.01 TM8X100C16MP11 FC/PC60C 1.02 1.01 1.00 TM8X100C16MP11 UC48C 1.03 1.06 0.97 TM8X100C16MP11 UC60C 1.02 1.01 1.00 TMLX080C16MP11 FC/MC/PC43C 1.02 1.00 1.02 TMLX080C16MP11 FC/MC/PC48C 1.02 1.01 1.01 TMLX080C16MP11 FC/PC60C 1.02 1.01 1.00 TMLX080C16MP11 UC48C 1.03 1.06 0.97 TMLX080C16MP11 UC60C 1.02 1.01 1.00 TMLX100C16MP11 FC/MC/PC43C 1.02 1.00 1.02 TMLX100C16MP11 FC/MC/PC48C 1.02 1.01 1.01 TMLX100C16MP11 FC/PC60C 1.02 1.01 1.00 TMLX100C16MP11 UC48C 1.03 1.06 0.97 TMLX100C16MP11 UC60C 1.02 1.01 1.00 Y*LC*A12 FC/MC/PC37A 1.01 0.98 1.03 Y*LC*B12 FC/MC/PC43B 1.01 0.93 1.09 Y*LC*C16 FC/MC/PC43C 1.02 1.01 1.00 Y*9C*B12 FC/MC/PC43B 1.00 0.96 1.04 Y*9C*C16 FC/MC/PC48C 1.01 1.02 0.98 Y*9C*C16 FC/PC60C 1.01 1.03 0.98 Y*9C*C16 UC48C 1.03 1.07 0.96 Y*9C*C16 UC60C 1.01 1.03 0.98 Y*9C*C20 FC/MC/PC43C 1.01 1.01 1.00 Y*9C*C20 FC/MC/PC48C 1.01 1.02 0.98 Y*9C*C20 UC48C 1.03 1.07 0.96
72 Johnson Controls Unitary Products
Page 73
1109431-YTG-A-0714
HEATING PERFORMANCE DATA - HIGH CFM 2-STAGE OPERATION
OUTDOOR UNIT MODEL NO. YZH02412C INDOOR COIL MODEL NO. FC/MC48D + MV12D
AIR TEMP. ENTERING
OUTDOOR UNIT (°F)
60
47
40
30
17
10
NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
AIR TEMP.
ENTERING
INDOOR COIL (°F)
60 28.74.811.7529.25.241.6329.65.761.51 70 28.14.032.0428.54.471.8728.95.021.69 80 27.43.452.3327.73.872.1028.14.421.87 60 24.24.251.6724.64.671.5424.95.191.41 70 23.73.631.9124.04.001.7624.34.441.61 80 23.23.142.1623.43.461.9823.73.851.80 60 21.63.961.6022.04.341.4922.54.811.37 70 21.3 3.44 1.81 21.6 3.75 1.69 21.9 4.11 1.56 80 21.03.032.0321.13.271.8921.33.571.75 60 20.73.511.7221.03.821.6121.34.161.50 70 20.33.041.9620.53.301.8220.83.571.70 80 20.0 2.67 2.19 20.1 2.88 2.05 20.2 3.11 1.90 60 17.03.231.5417.43.461.4717.73.691.41 70 16.52.841.7016.83.001.6417.13.201.57 80 16.02.501.8716.22.641.8016.52.791.73 60 15.12.851.5515.23.041.4715.43.251.39 70 14.72.601.6514.82.751.5815.02.941.50 80 14.22.371.7614.52.511.6914.72.671.61
800 900 1000
MBH COP KW MBH COP KW MBH COP KW
ID CFM
Multipliers for determining the performance with other indoor section. HIGH CFM
Air Handler Coil MBH COP KW
– FC/MC/PC48 1.03 0.89 1.16 AHV24B – 0.98 0.88 1.11 AHV30B – 0.99 0.91 1.10 AHV36C – 0.99 0.94 1.06 MV12B FC/MC43B 1.00 0.95 1.06 MV12D FC/MC48D 1.00 1.00 1.00 MV12D FC/MC60D 0.99 0.98 1.01
Furnace Coil MBH COP KW
T*(8,L)V*A12 FC/MC/PC37A 0.99 0.93 1.07 T*(8,L)V*B12 FC/MC/PC43B 0.99 0.94 1.05 T*(8,L)V*C16 FC/MC/PC43C 0.99 0.94 1.05 T*9V*A10 FC/MC/PC37A 1.01 0.91 1.11 T*9V*B12 FC/MC/PC43B 1.00 0.94 1.06 T*9V*C16 FC/MC/PC4 8C 1.01 0.98 1.03 T*9V*C16 FC/PC60C 1.01 0.98 1.03 T*9V*C16 UC48C 1.01 1.01 1.00 T*9V*C16 UC60C 1.01 0.98 1.03 T*9V*C20 FC/MC/PC4 3C 1.01 0.98 1.03 T*9V*C20 FC/MC/PC4 8C 1.01 0.98 1.03 T*9V*C20 UC48C 1.01 1.01 1.00 TM8X080C16MP11 FC/MC/PC43C 1.01 0.92 1.10 TM8X080C16MP11 FC/MC/PC48C 1.01 0.93 1.09 TM8X080C16MP11 FC/PC60C 1.01 0.93 1.08 TM8X080C16MP11 U C48C 1.02 0.96 1.06 TM8X080C16MP11 U C60C 1.01 0.93 1.08
Furnace Coil MBH COP KW
TM8X100C16MP11 FC/MC/PC43C 1.01 0.92 1.10 TM8X100C16MP11 FC/MC/PC48C 1.01 0.93 1.09 TM8X100C16MP11 FC/PC60C 1.01 0.93 1.08 TM8X100C16MP11 UC48C 1.02 0.96 1.06 TM8X100C16MP11 UC60C 1.01 0.93 1.08 TMLX080C16MP11 FC/MC/PC43C 1.01 0.92 1.10 TMLX080C16MP11 FC/MC/PC48C 1.01 0.93 1.09 TMLX080C16MP11 FC/PC60C 1.01 0.93 1.08 TMLX080C16MP11 UC48C 1.02 0.96 1.06 TMLX080C16MP11 UC60C 1.01 0.93 1.08 TMLX100C16MP11 FC/MC/PC43C 1.01 0.92 1.10 TMLX100C16MP11 FC/MC/PC48C 1.01 0.93 1.09 TMLX100C16MP11 FC/PC60C 1.01 0.93 1.08 TMLX100C16MP11 UC48C 1.02 0.96 1.06 TMLX100C16MP11 UC60C 1.01 0.93 1.08 Y*LC*A12 FC/MC/PC37A 0.99 0.93 1.07 Y*LC*B12 FC/MC/PC43B 0.99 0.94 1.05 Y*LC*C16 FC/MC/PC43C 0.99 0.94 1.05 Y*9C*B12 FC/MC/PC43B 1.00 0.94 1.06 Y*9C*C16 FC/MC/PC48C 1.01 0.98 1.03 Y*9C*C16 FC/PC60C 1.01 0.98 1.03 Y*9C*C16 UC48C 1.01 1.01 1.00 Y*9C*C16 UC60C 1.01 0.98 1.03 Y*9C*C20 FC/MC/PC43C 1.01 0.98 1.03 Y*9C*C20 FC/MC/PC48C 1.01 0.98 1.03 Y*9C*C20 UC48C 1.01 1.01 1.00
Johnson Controls Unitary Products 73
Page 74
1109431-YTG-A-0714
HEATING PERFORMANCE DATA - LOW CFM 1-STAGE OPERATION
OUTDOOR UNIT MODEL NO. YZH03612C INDOOR COIL MODEL NO. FC/MC62D + MV12D
AIR TEMP.
ENTERING
OUTDOOR UNIT (°F)
60
47
40
30
17
10
NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
AIR TEMP. ENTERING
INDOOR COIL (°F)
60 29.70 4.08 2.13 30.60 4.67 1.92 31.40 5.42 1.70 70 29.20 3.52 2.44 29.90 4.01 2.19 30.70 4.62 1.94 80 28.70 3.08 2.74 29.30 3.49 2.46 29.90 4.00 2.19 60 25.30 3.62 2.05 25.80 4.04 1.87 26.30 4.54 1.70 70 25.10 3.15 2.33 25.50 3.50 2.14 25.90 3.92 1.94 80 24.90 2.78 2.62 25.20 3.08 2.40 25.60 3.44 2.18 60 22.60 3.34 1.99 23.10 3.71 1.82 23.50 4.15 1.66 70 22.60 2.94 2.25 23.00 3.24 2.08 23.40 3.59 1.91 80 22.60 2.63 2.52 22.90 2.87 2.34 23.20 3.15 2.16 60 ––––––––– 70 ––––––––– 80 ––––––––– 60 ––––––––– 70 ––––––––– 80 ––––––––– 60 ––––––––– 70 ––––––––– 80 –––––––––
725 775 825
MBH COP KW MBH COP KW MBH COP KW
Multipliers for determining the performance with other indoor sections.
ID CFM
LOW CFM
Air Handler Coil MBH COP KW
– FC/MC62 1.04 0.97 1.08 AHE42D – 1.00 0.94 1.07 AHV36C – 0.99 0.99 1.00 AHV42D – 1.01 1.01 1.00 AHV48D – 1.02 1.03 0.99 MV12B FC/MC43B 1.02 0.99 1.03 MV12D FC/MC48D 1.01 1.00 1.01 MV12D FC/MC60D 1.01 0.97 1.04 MV12D FC/MC62D 1.00 1.00 1.00 MV12D FC64D 1.03 1.05 0.98 MV16C FC/MC43C 0.99 0.97 1.03 MV16C FC/MC48C 1.01 0.98 1.03 MV20D FC/MC48D 1.03 1.03 1.00 MV20D FC/MC60D 1.03 1.03 1.00 MV20D FC/MC62D 1.02 1.03 0.98 MV20D FC64D 1.05 1.08 0.97 MX12BN21 FC/MC43B 0.99 0.98 1.01 MX12DN21 FC/MC48D 1.00 1.02 0.98 MX12DN21 FC/MC60D 1.02 1.03 0.99 MX12DN21 FC64D 1.05 1.10 0.95
Furnace Coil MBH COP KW
T*(8,L)V*A12 FC/MC/PC37A 1.00 0.93 1.07 T*(8,L)V*B12 FC/MC/PC43B 1.03 0.99 1.04 T*(8,L)V*C16 FC/MC/PC43C 1.00 0.97 1.04 T*(8,L)V*C16 FC/MC/PC48C 1.01 0.95 1.06 T*(8,L)V*C16 FC/PC60C 1.02 0.96 1.06 T*(8,L)V*C16 UC48C 1.05 1.05 1.00 T*(8,L)V*C16 UC60C 1.00 0.95 1.05 T*(8,L)V*C20 FC/MC/PC43C 0.99 0.95 1.04 T*(8,L)V*C20 FC/MC/PC48C 1.00 0.95 1.05 T*(8,L)V*C20 FC/PC60C 1.02 1.00 1.02 T*(8,L)V*C20 UC48C 1.03 1.01 1.02 T*(8,L)V*C20 UC60C 1.00 0.95 1.05 T*9V*B12 FC/MC/PC43B 1.00 0.98 1.02 T*9V*C16 FC/MC/PC43C 1.02 0.98 1.03 T*9V*C16 FC/MC/PC48C 1.01 0.98 1.03 T*9V*C16 FC/PC60C 1.03 0.99 1.04 T*9V*C16 UC48C 1.03 1.03 1.00 T*9V*C16 UC60C 1.01 0.96 1.05 T*9V*C20 FC/MC/PC43C 0.99 0.97 1.02 T*9V*C20 FC/MC/PC48C 1.02 0.97 1.05 T*9V*C20 FC/PC60C 1.02 0.98 1.04 T*9V*C20 UC48C 1.05 1.02 1.03 T*9V*C20 UC60C 1.01 0.94 1.07 T*9V*D20 FC/MC/PC48D 1.02 1.01 1.01 T*9V*D20 FC/MC/PC60D 1.02 1.01 1.01 T*9V*D20 FC/MC62D 1.02 1.01 1.00
Continued on next page.
74 Johnson Controls Unitary Products
Page 75
1109431-YTG-A-0714
Furnace Coil MBH COP KW
T*9V*D20 FC64D 1.05 1.06 0.99 T*9V*D20 UC48D 1.05 1.06 0.99 T*9V*D20 UC60D 1.01 0.97 1.04 TM8X060A12MP11 FC/MC/PC37A 1.00 0.97 1.04 TM8X080B12MP11 FC/MC/PC43B 1.00 0.97 1.04 TM8X080C16MP11 FC/MC/PC43C 0.99 0.98 1.02 TM8X080C16MP11 FC/MC/PC48C 1.01 1.00 1.01 TM8X080C16MP11 FC/MC/PC48D 1.01 1.00 1.01 TM8X080C16MP11 FC/MC/PC60D 1.02 1.01 1.00 TM8X080C16MP11 FC/MC62D 1.00 1.01 0.99 TM8X080C16MP11 FC/PC60C 1.02 1.01 1.01 TM8X080C16MP11 FC64D 1.03 1.05 0.98 TM8X080C16MP11 U C48C 1.03 1.05 0.99 TM8X080C16MP11 U C48D 1.03 1.04 0.99 TM8X080C16MP11 U C60C 0.99 0.97 1.03 TM8X080C16MP11 U C60D 0.99 0.97 1.03 TM8X100C16MP11 FC/MC/PC43C 0.99 0.98 1.02 TM8X100C16MP11 FC/MC/PC48C 1.01 1.00 1.01 TM8X100C16MP11 FC/MC/PC48D 1.01 1.00 1.01 TM8X100C16MP11 FC/MC/PC60D 1.02 1.01 1.00 TM8X100C16MP11 FC/MC62D 1.00 1.01 0.99 TM8X100C16MP11 FC/PC60C 1.02 1.01 1.01 TM8X100C16MP11 FC64D 1.03 1.05 0.98 TM8X100C16MP11 U C48C 1.03 1.05 0.99 TM8X100C16MP11 U C48D 1.03 1.04 0.99 TM8X100C16MP11 U C60C 0.99 0.97 1.03 TM8X100C16MP11 U C60D 0.99 0.97 1.03 TMLX060A12MP11 FC/MC/PC37A 1.00 0.97 1.04 TMLX080B12MP11 FC/MC/PC43B 1.00 0.97 1.04 TMLX080C16MP11 FC/MC/PC43C 0.99 0.98 1.02 TMLX080C16MP11 FC/MC/PC48C 1.01 1.00 1.01 TMLX080C16MP11 FC/MC/PC48D 1.01 1.00 1.01 TMLX080C16MP11 FC/MC/PC60D 1.02 1.01 1.00 TMLX080C16MP11 FC/MC62D 1.00 1.01 0.99 TMLX080C16MP11 FC/PC60C 1.02 1.01 1.01 TMLX080C16MP11 FC64D 1.03 1.05 0.98 TMLX080C16MP11 U C48C 1.03 1.05 0.99 TMLX080C16MP11 U C48D 1.03 1.04 0.99 TMLX080C16MP11 U C60C 0.99 0.97 1.03 TMLX080C16MP11 U C60D 0.99 0.97 1.03 TMLX100C16MP11 FC/MC/PC43C 0.99 0.98 1.02 TMLX100C16MP11 FC/MC/PC48C 1.01 1.00 1.01 TMLX100C16MP11 FC/MC/PC48D 1.01 1.00 1.01 TMLX100C16MP11 FC/MC/PC60D 1.02 1.01 1.00 TMLX100C16MP11 FC/MC62D 1.00 1.01 0.99 TMLX100C16MP11 FC/PC60C 1.02 1.01 1.01 TMLX100C16MP11 FC64D 1.03 1.05 0.98 TMLX100C16MP11 U C48C 1.03 1.05 0.99 TMLX100C16MP11 U C48D 1.03 1.04 0.99 TMLX100C16MP11 U C60C 0.99 0.97 1.03 TMLX100C16MP11 U C60D 0.99 0.97 1.03
Furnace Coil MBH COP KW
TM9E060B12MP11 FC/MC/PC43B 0.99 0.95 1.05 TM9E080B12MP11 FC/MC/PC43B 0.99 0.95 1.05 TM9E080C16MP11 FC/MC/PC48D 1.01 0.99 1.01 TM9E080C16MP11 FC/MC62D 0.99 1.00 0.99 TM9E080C16MP11 FC64D 1.03 1.05 0.99 TM9E080C16MP11 UC48D 1.03 1.04 0.99 TM9E100C16MP11 FC/MC/PC48D 1.01 0.99 1.01 TM9E100C16MP11 FC/MC62D 0.99 1.00 0.99 TM9E100C16MP11 FC64D 1.03 1.05 0.99 TM9E100C16MP11 UC48D 1.03 1.04 0.99 TM9X060B12MP11 FC/MC/PC43B 0.99 0.95 1.05 TM9X080B12MP11 FC/MC/PC43B 0.99 0.95 1.05 TM9X080C16MP11 FC/MC/PC48D 1.01 0.99 1.01 TM9X080C16MP11 FC/MC62D 0.99 1.00 0.99 TM9X080C16MP11 FC64D 1.03 1.05 0.99 TM9X080C16MP11 UC48D 1.03 1.04 0.99 TM9X100C16MP11 FC/MC/PC48D 1.01 0.99 1.01 TM9X100C16MP11 FC/MC62D 0.99 1.00 0.99 TM9X100C16MP11 FC64D 1.03 1.05 0.99 TM9X100C16MP11 UC48D 1.03 1.04 0.99 Y*LC*A12 FC/MC/PC37A 1.00 0.93 1.07 Y*LC*B12 FC/MC/PC43B 1.03 0.99 1.04 Y*LC*C16 FC/MC/PC43C 1.00 0.97 1.04 Y*LC*C16 FC/MC/PC48C 1.01 0.95 1.06 Y*LC*C16 FC/PC60C 1.02 0.96 1.06 Y*LC*C16 UC48C 1.05 1.05 1.00 Y*LC*C16 UC60C 1.00 0.95 1.05 Y*LC*C20 FC/MC/PC43C 0.99 0.95 1.04 Y*LC*C20 FC/MC/PC48C 1.00 0.95 1.05 Y*LC*C20 FC/PC60C 1.02 1.00 1.02 Y*LC*C20 UC48C 1.03 1.01 1.02 Y*LC*C20 UC60C 1.00 0.95 1.05 Y*9C*B12 FC/MC/PC43B 1.00 0.98 1.02 Y*9C*C16 FC/MC/PC43C 1.02 0.98 1.03 Y*9C*C16 FC/MC/PC48C 1.01 0.98 1.03 Y*9C*C16 FC/PC60C 1.03 0.99 1.04 Y*9C*C16 UC48C 1.03 1.03 1.00 Y*9C*C16 UC60C 1.01 0.96 1.05 Y*9C*C20 FC/MC/PC43C 0.99 0.97 1.02 Y*9C*C20 FC/MC/PC48C 1.02 0.97 1.05 Y*9C*C20 FC/PC60C 1.02 0.98 1.04 Y*9C*C20 UC48C 1.05 1.02 1.03 Y*9C*C20 UC60C 1.01 0.94 1.07 Y*9C*D20 FC/MC/PC48D 1.02 1.01 1.01 Y*9C*D20 FC/MC/PC60D 1.02 1.01 1.01 Y*9C*D20 FC/MC62D 1.02 1.01 1.00 Y*9C*D20 FC64D 1.05 1.06 0.99 Y*9C*D20 UC48D 1.05 1.06 0.99 Y*9C*D20 UC60D 1.01 0.97 1.04
Johnson Controls Unitary Products 75
Page 76
1109431-YTG-A-0714
HEATING PERFORMANCE DATA - HIGH CFM 2-STAGE OPERATION
OUTDOOR UNIT MODEL NO. YZH03612C INDOOR COIL MODEL NO. FC/MC62D + MV12D
AIR TEMP.
ENTERING
OUTDOOR UNIT (°F)
60
47
40
30
17
10
NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
AIR TEMP. ENTERING
INDOOR COIL (°F)
60 42.15.842.4343.35.292.3844.55.402.33 70 41.25.242.6542.34.792.6043.44.902.55 80 40.34.712.8841.34.362.8142.34.472.75 60 36.55.292.3337.14.682.2937.64.692.27 70 35.34.652.5536.04.202.5136.74.262.46 80 34.04.112.7834.93.802.7235.83.882.66 60 32.94.722.3433.44.202.3133.94.232.27 70 32.54.222.5932.93.812.5433.43.862.48 80 32.13.822.8332.53.482.7632.83.532.70 60 29.34.372.2629.23.812.2229.23.772.17 70 28.73.892.4929.03.472.4529.33.472.41 80 28.23.502.7228.83.182.6929.43.232.64 60 23.5 3.61 2.20 23.8 3.14 2.19 24.0 3.11 2.17 70 23.73.302.4324.02.922.4124.32.912.38 80 23.93.032.6524.22.732.6324.62.742.59 60 16.32.702.0417.92.462.0919.52.552.14 70 18.42.692.3119.42.422.3220.32.472.34 80 20.52.692.5720.82.412.5621.22.412.54
1125 1225 1325
MBH COP KW MBH COP KW MBH COP KW
ID CFM
Multipliers for determining the performance with other indoor sections. HIGH CFM
Air Handler Coil MBH COP KW
– FC/MC62 1.01 0.92 1.10 AHE42D – 0.99 0.97 1.02 AHV36C – 1.00 0.95 1.06 AHV42D – 0.99 0.97 1.03 AHV48D – 0.98 0.96 1.02 MV12B FC/MC43B 1.00 0.95 1.05 MV12D FC/MC48D 0.99 0.97 1.02 MV12D FC/MC60D 0.99 0.94 1.05 MV12D FC/MC62D 1.00 1.00 1.00 MV12D FC64D 1.00 1.02 0.98 MV16C FC/MC43C 0.99 0.96 1.04 MV16C FC/MC48C 0.99 0.96 1.03 MV20D FC/MC48D 1.00 1.00 1.00 MV20D FC/MC60D 1.00 0.99 1.01 MV20D FC/MC62D 1.00 1.01 0.99 MV20D FC64D 1.01 1.04 0.97 MX12BN21 FC/MC43B 0.99 0.92 1.07 MX12DN21 FC/MC48D 0.98 0.96 1.02 MX12DN21 FC/MC60D 0.98 0.96 1.02 MX12DN21 FC64D 1.00 1.02 0.98
Furnace Coil MBH COP KW
T*(8,L)V*A12 FC/MC/PC37A 1.00 0.90 1.11 T*(8,L)V*B12 FC/MC/PC43B 1.01 0.93 1.09 T*(8,L)V*C16 FC/MC/PC43C 0.99 0.95 1.05 T*(8,L)V*C16 FC/MC/PC48C 0.99 0.97 1.03 T*(8,L)V*C16 FC/PC60C 0.98 0.94 1.04 T*(8,L)V*C16 UC48C 1.00 1.00 1.00 T*(8,L)V*C16 UC60C 0.99 0.94 1.05 T*(8,L)V*C20 FC/MC/PC43C 0.99 0.95 1.05 T*(8,L)V*C20 FC/MC/PC48C 0.99 0.96 1.03 T*(8,L)V*C20 FC/PC60C 0.99 0.96 1.03 T*(8,L)V*C20 UC48C 1.00 0.99 1.01 T*(8,L)V*C20 UC60C 0.99 0.94 1.05 T*9V*B12 FC/MC/PC43B 1.00 0.92 1.09 T*9V*C16 FC/MC/PC43C 1.00 0.94 1.07 T*9V*C16 FC/MC/PC48C 0.99 0.94 1.05 T*9V*C16 FC/PC60C 1.00 0.94 1.06 T*9V*C16 UC48C 1.00 0.97 1.03 T*9V*C16 UC60C 1.00 0.94 1.07 T*9V*C20 FC/MC/PC43C 0.99 0.94 1.05 T*9V*C20 FC/MC/PC48C 1.01 0.97 1.05 T*9V*C20 FC/PC60C 1.01 0.96 1.05 T*9V*C20 UC48C 1.03 0.99 1.04 T*9V*C20 UC60C 1.01 0.96 1.06 T*9V*D20 FC/MC/PC48D 1.00 0.97 1.03 T*9V*D20 FC/MC/PC60D 0.99 0.96 1.04 T*9V*D20 FC/MC62D 1.00 0.98 1.02
Continued on next page.
76 Johnson Controls Unitary Products
Page 77
1109431-YTG-A-0714
Furnace Coil MBH COP KW
T*9V*D20 FC64D 1.01 1.01 1.00 T*9V*D20 UC48D 1.01 1.00 1.02 T*9V*D20 UC60D 0.99 0.95 1.05 TM8X060A12MP11 FC/MC/PC37A 0.99 0.90 1.10 TM8X080B12MP11 FC/MC/PC43B 0.99 0.90 1.10 TM8X080C16MP11 FC/MC/PC43C 0.99 0.93 1.06 TM8X080C16MP11 FC/MC/PC48C 0.99 0.95 1.04 TM8X080C16MP11 FC/MC/PC48D 0.99 0.95 1.04 TM8X080C16MP11 FC/MC/PC60D 0.99 0.95 1.04 TM8X080C16MP11 FC/MC62D 0.99 0.97 1.02 TM8X080C16MP11 FC/PC60C 0.99 0.95 1.04 TM8X080C16MP11 FC64D 1.00 1.00 1.00 TM8X080C16MP11 U C48C 1.00 0.98 1.02 TM8X080C16MP11 U C48D 1.00 0.98 1.02 TM8X080C16MP11 U C60C 0.99 0.94 1.05 TM8X080C16MP11 U C60D 0.99 0.94 1.05 TM8X100C16MP11 FC/MC/PC43C 0.99 0.93 1.06 TM8X100C16MP11 FC/MC/PC48C 0.99 0.95 1.04 TM8X100C16MP11 FC/MC/PC48D 0.99 0.95 1.04 TM8X100C16MP11 FC/MC/PC60D 0.99 0.95 1.04 TM8X100C16MP11 FC/MC62D 0.99 0.97 1.02 TM8X100C16MP11 FC/PC60C 0.99 0.95 1.04 TM8X100C16MP11 FC64D 1.00 1.00 1.00 TM8X100C16MP11 U C48C 1.00 0.98 1.02 TM8X100C16MP11 U C48D 1.00 0.98 1.02 TM8X100C16MP11 U C60C 0.99 0.94 1.05 TM8X100C16MP11 U C60D 0.99 0.94 1.05 TMLX060A12MP11 FC/MC/PC37A 0.99 0.90 1.10 TMLX080B12MP11 FC/MC/PC43B 0.99 0.90 1.10 TMLX080C16MP11 FC/MC/PC43C 0.99 0.93 1.06 TMLX080C16MP11 FC/MC/PC48C 0.99 0.95 1.04 TMLX080C16MP11 FC/MC/PC48D 0.99 0.95 1.04 TMLX080C16MP11 FC/MC/PC60D 0.99 0.95 1.04 TMLX080C16MP11 FC/MC62D 0.99 0.97 1.02 TMLX080C16MP11 FC/PC60C 0.99 0.95 1.04 TMLX080C16MP11 FC64D 1.00 1.00 1.00 TMLX080C16MP11 U C48C 1.00 0.98 1.02 TMLX080C16MP11 U C48D 1.00 0.98 1.02 TMLX080C16MP11 U C60C 0.99 0.94 1.05 TMLX080C16MP11 U C60D 0.99 0.94 1.05 TMLX100C16MP11 FC/MC/PC43C 0.99 0.93 1.06 TMLX100C16MP11 FC/MC/PC48C 0.99 0.95 1.04 TMLX100C16MP11 FC/MC/PC48D 0.99 0.95 1.04 TMLX100C16MP11 FC/MC/PC60D 0.99 0.95 1.04 TMLX100C16MP11 FC/MC62D 0.99 0.97 1.02 TMLX100C16MP11 FC/PC60C 0.99 0.95 1.04 TMLX100C16MP11 FC64D 1.00 1.00 1.00 TMLX100C16MP11 U C48C 1.00 0.98 1.02 TMLX100C16MP11 U C48D 1.00 0.98 1.02 TMLX100C16MP11 U C60C 0.99 0.94 1.05 TMLX100C16MP11 U C60D 0.99 0.94 1.05
Furnace Coil MBH COP KW
TM9E060B12MP11 FC/MC/PC43B 0.99 0.90 1.10 TM9E080B12MP11 FC/MC/PC43B 0.99 0.90 1.10 TM9E080C16MP11 FC/MC/PC48D 0.99 0.94 1.05 TM9E080C16MP11 FC/MC62D 1.00 0.96 1.04 TM9E080C16MP11 FC64D 1.01 0.99 1.03 TM9E080C16MP11 UC48D 1.00 0.97 1.03 TM9E100C16MP11 FC/MC/PC48D 0.99 0.94 1.05 TM9E100C16MP11 FC/MC62D 1.00 0.96 1.04 TM9E100C16MP11 FC64D 1.01 0.99 1.03 TM9E100C16MP11 UC48D 1.00 0.97 1.03 TM9X060B12MP11 FC/MC/PC43B 0.99 0.90 1.10 TM9X080B12MP11 FC/MC/PC43B 0.99 0.90 1.10 TM9X080C16MP11 FC/MC/PC48D 0.99 0.94 1.05 TM9X080C16MP11 FC/MC62D 1.00 0.96 1.04 TM9X080C16MP11 FC64D 1.01 0.99 1.03 TM9X080C16MP11 UC48D 1.00 0.97 1.03 TM9X100C16MP11 FC/MC/PC48D 0.99 0.94 1.05 TM9X100C16MP11 FC/MC62D 1.00 0.96 1.04 TM9X100C16MP11 FC64D 1.01 0.99 1.03 TM9X100C16MP11 UC48D 1.00 0.97 1.03 Y*LC*A12 FC/MC/PC37A 1.00 0.90 1.11 Y*LC*B12 FC/MC/PC43B 1.01 0.93 1.09 Y*LC*C16 FC/MC/PC43C 0.99 0.95 1.05 Y*LC*C16 FC/MC/PC48C 0.99 0.97 1.03 Y*LC*C16 FC/PC60C 0.98 0.94 1.04 Y*LC*C16 UC48C 1.00 1.00 1.00 Y*LC*C16 UC60C 0.99 0.94 1.05 Y*LC*C20 FC/MC/PC43C 0.99 0.95 1.05 Y*LC*C20 FC/MC/PC48C 0.99 0.96 1.03 Y*LC*C20 FC/PC60C 0.99 0.96 1.03 Y*LC*C20 UC48C 1.00 0.99 1.01 Y*LC*C20 UC60C 0.99 0.94 1.05 Y*9C*B12 FC/MC/PC43B 1.00 0.92 1.09 Y*9C*C16 FC/MC/PC43C 1.00 0.94 1.07 Y*9C*C16 FC/MC/PC48C 0.99 0.94 1.05 Y*9C*C16 FC/PC60C 1.00 0.94 1.06 Y*9C*C16 UC48C 1.00 0.97 1.03 Y*9C*C16 UC60C 1.00 0.94 1.07 Y*9C*C20 FC/MC/PC43C 0.99 0.94 1.05 Y*9C*C20 FC/MC/PC48C 1.01 0.97 1.05 Y*9C*C20 FC/PC60C 1.01 0.96 1.05 Y*9C*C20 UC48C 1.03 0.99 1.04 Y*9C*C20 UC60C 1.01 0.96 1.06 Y*9C*D20 FC/MC/PC48D 1.00 0.97 1.03 Y*9C*D20 FC/MC/PC60D 0.99 0.96 1.04 Y*9C*D20 FC/MC62D 1.00 0.98 1.02 Y*9C*D20 FC64D 1.01 1.01 1.00 Y*9C*D20 UC48D 1.01 1.00 1.02 Y*9C*D20 UC60D 0.99 0.95 1.05
Johnson Controls Unitary Products 77
Page 78
1109431-YTG-A-0714
HEATING PERFORMANCE DATA - LOW CFM 1-STAGE OPERATION
OUTDOOR UNIT MODEL NO. YZH04812C INDOOR COIL MODEL NO. FC/MC62D + MV20D
AIR TEMP.
ENTERING
OUTDOOR UNIT (°F)
60
47
40
30
17
10
NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
AIR TEMP. ENTERING
INDOOR COIL (°F)
60 40.00 4.31 2.72 40.70 4.65 2.57 41.40 5.04 2.41 70 39.40 3.70 3.12 40.00 4.00 2.93 40.60 4.33 2.75 80 38.70 3.23 3.51 39.30 3.49 3.30 39.90 3.78 3.09 60 34.10 3.81 2.62 34.60 4.05 2.50 35.10 4.32 2.38 70 33.40 3.29 2.98 34.00 3.50 2.85 34.60 3.74 2.71 80 32.80 2.87 3.34 33.40 3.07 3.19 34.00 3.28 3.04 60 30.80 3.51 2.57 31.20 3.70 2.47 31.60 3.90 2.38 70 30.40 3.04 2.93 30.80 3.21 2.81 31.20 3.40 2.69 80 29.90 2.67 3.28 30.30 2.83 3.14 30.80 3.00 3.01 60 ––––––––– 70 ––––––––– 80 ––––––––– 60 ––––––––– 70 ––––––––– 80 ––––––––– 60 ––––––––– 70 ––––––––– 80 –––––––––
1025 1075 1125
MBH COP KW MBH COP KW MBH COP KW
Multipliers for determining the performance with other indoor sections. LOW CFM
Air Handler Coil MBH COP KW
– FC/MC62 1.04 0.95 1.09 AHE60D – 1.01 1.01 0.99 AHV48D – 1.00 0.95 1.05 AHV60D – 0.99 0.97 1.02 MV16C FC/MC48C 1.00 0.96 1.04 MV16C FC60C 1.01 0.95 1.06 MV20D FC/MC48D 0.99 0.96 1.04 MV20D FC/MC60D 1.01 0.94 1.07 MV20D FC/MC62D 1.00 1.00 1.00 MV20D FC64D 1.01 1.03 0.98 MX16CN21 FC/MC48C 0.99 0.97 1.02 MX16CN21 FC60C 1.00 0.97 1.04
Continued on next page.
ID CFM
78 Johnson Controls Unitary Products
Page 79
1109431-YTG-A-0714
Furnace Coil MBH COP KW
T*(8,L)V*C16 FC/MC/PC48C 1.01 0.97 1.05 T*(8,L)V*C16 FC/MC/PC48D 1.01 0.97 1.05 T*(8,L)V*C16 FC/MC/PC60D 1.01 0.94 1.07 T*(8,L)V*C16 FC/MC62D 1.00 0.97 1.04 T*(8,L)V*C16 FC/PC60C 1.01 0.94 1.07 T*(8,L)V*C16 FC64D 1.02 1.01 1.01 T*(8,L)V*C16 UC48C 1.02 0.99 1.04 T*(8,L)V*C16 UC60C 0.99 0.93 1.07 T*(8,L)V*C20 FC/MC/PC48C 1.00 0.95 1.05 T*(8,L)V*C20 FC/MC/PC48D 1.00 0.95 1.05 T*(8,L)V*C20 FC/MC/PC60D 1.01 0.94 1.07 T*(8,L)V*C20 FC/MC62D 1.01 0.97 1.04 T*(8,L)V*C20 FC/PC60C 1.01 0.94 1.07 T*(8,L)V*C20 FC64D 1.02 1.01 1.02 T*(8,L)V*C20 UC48C 1.03 0.99 1.04 T*(8,L)V*C20 UC60C 0.99 0.92 1.07 T*9V*C16 FC/MC/PC4 8C 1.00 0.94 1.06 T*9V*C16 FC/MC/PC4 8D 1.00 0.94 1.06 T*9V*C16 FC/MC/PC6 0D 1.01 0.94 1.08 T*9V*C16 FC/MC62D 1.01 0.97 1.04 T*9V*C16 FC/PC60C 1.01 0.94 1.08 T*9V*C16 FC64D 1.02 1.01 1.02 T*9V*C16 UC48C 1.02 0.98 1.05 T*9V*C16 UC60C 0.99 0.91 1.09 T*9V*C20 FC/MC/PC4 8C 1.00 0.95 1.05 T*9V*C20 FC/MC/PC4 8D 1.00 0.95 1.05 T*9V*C20 FC/MC/PC6 0D 1.01 0.94 1.07 T*9V*C20 FC/MC62D 1.00 0.97 1.04 T*9V*C20 FC/PC60C 1.01 0.94 1.07 T*9V*C20 FC64D 1.02 1.01 1.02 T*9V*C20 UC48C 1.03 0.99 1.04 T*9V*C20 UC60C 1.00 0.93 1.08 T*9V*D20 FC/MC/PC4 8D 1.00 0.94 1.06 T*9V*D20 FC/MC/PC6 0D 1.01 0.94 1.08 T*9V*D20 FC/MC62D 1.01 0.98 1.03 T*9V*D20 FC64D 1.02 1.00 1.02 T*9V*D20 UC48D 1.03 0.99 1.04 T*9V*D20 UC60D 0.99 0.93 1.07 TM8X080C16MP11 FC/MC/PC48C 0.99 0.96 1.04 TM8X080C16MP11 FC/MC/PC48D 0.99 0.96 1.04 TM8X080C16MP11 FC/MC/PC60D 1.01 0.95 1.05 TM8X080C16MP11 FC/MC62D 0.99 0.98 1.02 TM8X080C16MP11 FC/PC60C 1.00 0.95 1.05 TM8X080C16MP11 FC64D 1.02 1.02 0.99 TM8X080C16MP11 U C48C 1.02 0.99 1.02 TM8X080C16MP11 U C48D 1.02 0.99 1.02 TM8X080C16MP11 U C60C 0.99 0.93 1.07 TM8X080C16MP11 U C60D 0.99 0.93 1.07 TM8X100C16MP11 FC/MC/PC48C 0.99 0.96 1.04 TM8X100C16MP11 FC/MC/PC48D 0.99 0.96 1.04 TM8X100C16MP11 FC/MC/PC60D 1.01 0.95 1.05 TM8X100C16MP11 FC/MC62D 0.99 0.98 1.02 TM8X100C16MP11 FC/PC60C 1.00 0.95 1.05 TM8X100C16MP11 FC64D 1.02 1.02 0.99 TM8X100C16MP11 U C48C 1.02 0.99 1.02 TM8X100C16MP11 U C48D 1.02 0.99 1.02
Furnace Coil MBH COP KW
TM8X100C16MP11 UC60C 0.99 0.93 1.07 TM8X100C16MP11 UC60D 0.99 0.93 1.07 TM8X100C20MP11 FC/MC/PC48C 1.01 0.98 1.03 TM8X100C20MP11 FC/MC/PC48D 1.01 0.98 1.02 TM8X100C20MP11 FC/MC/PC60D 1.01 0.97 1.04 TM8X100C20MP11 FC/MC62D 1.00 0.99 1.01 TM8X100C20MP11 FC/PC60C 1.01 0.95 1.06 TM8X100C20MP11 UC48C 1.02 1.01 1.01 TM8X100C20MP11 UC48D 1.02 1.02 1.01 TM8X100C20MP11 UC60C 0.99 0.95 1.04 TM8X100C20MP11 UC60D 0.99 0.95 1.04 TM8X120C20MP11 FC/MC/PC48C 1.01 0.98 1.03 TM8X120C20MP11 FC/MC/PC48D 1.01 0.98 1.02 TM8X120C20MP11 FC/MC/PC60D 1.01 0.97 1.04 TM8X120C20MP11 FC/MC62D 1.00 0.99 1.01 TM8X120C20MP11 FC/PC60C 1.01 0.95 1.06 TM8X120C20MP11 UC48C 1.02 1.01 1.01 TM8X120C20MP11 UC48D 1.02 1.02 1.01 TM8X120C20MP11 UC60C 0.99 0.95 1.04 TM8X120C20MP11 UC60D 0.99 0.95 1.04 TMLX080C16MP11 FC/MC/PC48C 0.99 0.96 1.04 TMLX080C16MP11 FC/MC/PC48D 0.99 0.96 1.04 TMLX080C16MP11 FC/MC/PC60D 1.01 0.95 1.05 TMLX080C16MP11 FC/MC62D 0.99 0.98 1.02 TMLX080C16MP11 FC/PC60C 1.00 0.95 1.05 TMLX080C16MP11 FC64D 1.02 1.02 0.99 TMLX080C16MP11 UC48C 1.02 0.99 1.02 TMLX080C16MP11 UC48D 1.02 0.99 1.02 TMLX080C16MP11 UC60C 0.99 0.93 1.07 TMLX080C16MP11 UC60D 0.99 0.93 1.07 TMLX100C16MP11 FC/MC/PC48C 0.99 0.96 1.04 TMLX100C16MP11 FC/MC/PC48D 0.99 0.96 1.04 TMLX100C16MP11 FC/MC/PC60D 1.01 0.95 1.05 TMLX100C16MP11 FC/MC62D 0.99 0.98 1.02 TMLX100C16MP11 FC/PC60C 1.00 0.95 1.05 TMLX100C16MP11 FC64D 1.02 1.02 0.99 TMLX100C16MP11 UC48C 1.02 0.99 1.02 TMLX100C16MP11 UC48D 1.02 0.99 1.02 TMLX100C16MP11 UC60C 0.99 0.93 1.07 TMLX100C16MP11 UC60D 0.99 0.93 1.07 TMLX100C20MP11 FC/MC/PC48C 1.01 0.98 1.03 TMLX100C20MP11 FC/MC/PC48D 1.01 0.98 1.02 TMLX100C20MP11 FC/MC/PC60D 1.01 0.97 1.04 TMLX100C20MP11 FC/MC62D 1.00 0.99 1.01 TMLX100C20MP11 FC/PC60C 1.01 0.95 1.06 TMLX100C20MP11 UC48C 1.02 1.01 1.01 TMLX100C20MP11 UC48D 1.02 1.02 1.01 TMLX100C20MP11 UC60C 0.99 0.95 1.04 TMLX100C20MP11 UC60D 0.99 0.95 1.04 TMLX120C20MP11 FC/MC/PC48C 1.01 0.98 1.03 TMLX120C20MP11 FC/MC/PC48D 1.01 0.98 1.02 TMLX120C20MP11 FC/MC/PC60D 1.01 0.97 1.04 TMLX120C20MP11 FC/MC62D 1.00 0.99 1.01 TMLX120C20MP11 FC/PC60C 1.01 0.95 1.06 TMLX120C20MP11 UC48C 1.02 1.01 1.01
Continued on next page.
Johnson Controls Unitary Products 79
Page 80
1109431-YTG-A-0714
Furnace Coil MBH COP KW
TMLX120C20MP11 UC48D 1.02 1.02 1.01 TMLX120C20MP11 UC60C 0.99 0.95 1.04 TMLX120C20MP11 UC60D 0.99 0.95 1.04 TM9E100C20MP11 FC/MC/PC48C 0.99 0.93 1.07 TM9E100C20MP11 FC/MC/PC48D 0.99 0.93 1.07 TM9E100C20MP11 FC/MC/PC60D 1.00 0.92 1.09 TM9E100C20MP11 FC/MC62D 0.99 0.96 1.04 TM9E100C20MP11 FC64D 1.01 0.99 1.02 TM9E100C20MP11 UC48C 1.01 0.97 1.04 TM9E100C20MP11 UC48D 1.02 0.98 1.04 TM9E100C20MP11 UC60D 0.98 0.90 1.09 TM9E120D20MP11 FC/MC/PC48D 0.99 0.94 1.06 TM9E120D20MP11 FC/MC/PC60D 1.00 0.93 1.07 TM9E120D20MP11 FC/MC62D 0.99 0.96 1.04 TM9E120D20MP11 FC64D 1.01 0.99 1.02 TM9E120D20MP11 UC48D 1.01 0.98 1.03 TM9E120D20MP11 UC60D 0.98 0.93 1.05 TM9X100C20MP11 FC/MC/PC48C 0.99 0.93 1.07 TM9X100C20MP11 FC/MC/PC48D 0.99 0.93 1.07 TM9X100C20MP11 FC/MC/PC60D 1.00 0.92 1.09 TM9X100C20MP11 FC/MC62D 0.99 0.96 1.04 TM9X100C20MP11 FC64D 1.01 0.99 1.02 TM9X100C20MP11 UC48C 1.01 0.97 1.04 TM9X100C20MP11 UC48D 1.02 0.98 1.04 TM9X100C20MP11 UC60D 0.98 0.90 1.09 TM9X120D20MP11 FC/MC/PC48D 0.99 0.94 1.06 TM9X120D20MP11 FC/MC/PC60D 1.00 0.93 1.07 TM9X120D20MP11 FC/MC62D 0.99 0.96 1.04 TM9X120D20MP11 FC64D 1.01 0.99 1.02 TM9X120D20MP11 UC48D 1.01 0.98 1.03 TM9X120D20MP11 UC60D 0.98 0.93 1.05 Y*LC*C16 FC/MC/PC48C 1.01 0.97 1.05 Y*LC*C16 FC/MC/PC48D 1.01 0.97 1.05 Y*LC*C16 FC/MC/PC60D 1.01 0.94 1.07 Y*LC*C16 FC/MC62D 1.00 0.97 1.04 Y*LC*C16 FC/PC60C 1.01 0.94 1.07
Furnace Coil MBH COP KW
Y*LC*C16 FC64D 1.02 1.01 1.01 Y*LC*C16 UC48C 1.02 0.99 1.04 Y*LC*C16 UC60C 0.99 0.93 1.07 Y*LC*C20 FC/MC/PC48C 1.00 0.95 1.05 Y*LC*C20 FC/MC/PC48D 1.00 0.95 1.05 Y*LC*C20 FC/MC/PC60D 1.01 0.94 1.07 Y*LC*C20 FC/MC62D 1.01 0.97 1.04 Y*LC*C20 FC/PC60C 1.01 0.94 1.07 Y*LC*C20 FC64D 1.02 1.01 1.02 Y*LC*C20 UC48C 1.03 0.99 1.04 Y*LC*C20 UC60C 0.99 0.92 1.07 Y*9C*C16 FC/MC/PC48C 1.00 0.94 1.06 Y*9C*C16 FC/MC/PC48D 1.00 0.94 1.06 Y*9C*C16 FC/MC/PC60D 1.01 0.94 1.08 Y*9C*C16 FC/MC62D 1.01 0.97 1.04 Y*9C*C16 FC/PC60C 1.01 0.94 1.08 Y*9C*C16 FC64D 1.02 1.01 1.02 Y*9C*C16 UC48C 1.02 0.98 1.05 Y*9C*C16 UC60C 0.99 0.91 1.09 Y*9C*C20 FC/MC/PC48C 1.00 0.95 1.05 Y*9C*C20 FC/MC/PC48D 1.00 0.95 1.05 Y*9C*C20 FC/MC/PC60D 1.01 0.94 1.07 Y*9C*C20 FC/MC62D 1.00 0.97 1.04 Y*9C*C20 FC/PC60C 1.01 0.94 1.07 Y*9C*C20 FC64D 1.02 1.01 1.02 Y*9C*C20 UC48C 1.03 0.99 1.04 Y*9C*C20 UC60C 1.00 0.93 1.08 Y*9C*D20 FC/MC/PC48D 1.00 0.94 1.06 Y*9C*D20 FC/MC/PC60D 1.01 0.94 1.08 Y*9C*D20 FC/MC62D 1.01 0.98 1.03 Y*9C*D20 FC64D 1.02 1.00 1.02 Y*9C*D20 UC48D 1.03 0.99 1.04
Y*9C*D20 UC60D 0.99 0.93 1.07
80 Johnson Controls Unitary Products
Page 81
1109431-YTG-A-0714
HEATING PERFORMANCE DATA - HIGH CFM 2-STAGE OPERATION
OUTDOOR UNIT MODEL NO. YZH04812C INDOOR COIL MODEL NO. FC/MC62D + MV20D
AIR TEMP. ENTERING
OUTDOOR UNIT (°F)
60
47
40
30
17
10
NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
AIR TEMP.
ENTERING
INDOOR COIL (°F)
60 56.24.793.4457.14.913.4057.95.043.37 70 54.94.313.7355.74.433.6856.54.553.64 80 53.63.914.0254.34.023.9655.14.133.91 60 48.44.403.2349.04.493.2049.64.593.17 70 47.53.883.5948.03.983.5348.54.093.48 80 46.53.463.9447.03.563.8747.43.663.80 60 42.13.763.2843.03.883.2543.84.013.20 70 42.13.453.5841.93.463.5541.73.483.52 80 42.23.193.8840.93.103.8639.63.023.84 60 31.93.103.0234.23.283.0636.53.453.10 70 34.62.983.4036.13.093.4237.63.223.43 80 37.22.883.7838.02.953.7738.83.023.76 60 31.83.103.0032.43.163.0032.93.203.01 70 31.32.793.2831.82.843.2832.32.883.29 80 30.72.533.5631.22.573.5631.72.613.57 60 28.02.733.0026.92.662.9725.92.582.94 70 26.02.383.2126.22.393.2226.52.403.23 80 24.02.063.4225.52.163.4727.02.253.52
1550 1650 1750
MBH COP KW MBH COP KW MBH COP KW
Multipliers for determining the performance with other indoor sections. HIGH CFM
Air Handler Coil MBH COP KW
– FC/MC62 1.01 0.94 1.07 AHE60D – 0.99 0.99 1.00 AHV48D – 0.99 0.94 1.05 AHV60D – 1.00 0.97 1.03 MV16C FC/MC48C 1.00 0.96 1.04 MV16C FC60C 1.00 0.95 1.05 MV20D FC/MC48D 1.00 0.97 1.03 MV20D FC/MC60D 1.00 0.95 1.05 MV20D FC/MC62D 1.00 1.00 1.00 MV20D FC64D 1.01 1.02 0.99 MX16CN21 FC/MC48C 1.00 0.96 1.04 MX16CN21 FC60C 1.00 0.94 1.06
Continued on next page.
ID CFM
Johnson Controls Unitary Products 81
Page 82
1109431-YTG-A-0714
Furnace Coil MBH COP KW
T*(8,L)V*C16 FC/MC/PC48C 1.01 0.92 1.09 T*(8,L)V*C16 FC/MC/PC48D 1.01 0.92 1.09 T*(8,L)V*C16 FC/MC/PC60D 1.00 0.93 1.08 T*(8,L)V*C16 FC/MC62D 1.01 0.97 1.04 T*(8,L)V*C16 FC/PC60C 1.00 0.93 1.08 T*(8,L)V*C16 FC64D 1.01 0.99 1.02 T*(8,L)V*C16 UC48C 1.01 0.96 1.05 T*(8,L)V*C16 UC60C 1.00 0.93 1.07 T*(8,L)V*C20 FC/MC/PC48C 1.01 0.94 1.07 T*(8,L)V*C20 FC/MC/PC48D 1.01 0.94 1.07 T*(8,L)V*C20 FC/MC/PC60D 1.00 0.93 1.07 T*(8,L)V*C20 FC/MC62D 1.00 0.97 1.03 T*(8,L)V*C20 FC/PC60C 1.00 0.93 1.07 T*(8,L)V*C20 FC64D 1.01 1.01 1.01 T*(8,L)V*C20 UC48C 1.01 0.96 1.05 T*(8,L)V*C20 UC60C 1.00 0.94 1.06 T*9V*C16 FC/MC/PC48C 1.01 0.94 1.08 T*9V*C16 FC/MC/PC48D 1.01 0.94 1.08 T*9V*C16 FC/MC/PC60D 1.00 0.92 1.08 T*9V*C16 FC/MC62D 1.01 0.95 1.06 T*9V*C16 FC/PC60C 1.00 0.92 1.08 T*9V*C16 FC64D 1.02 0.99 1.03 T*9V*C16 UC48C 1.01 0.94 1.08 T*9V*C16 UC60C 1.00 0.90 1.11 T*9V*C20 FC/MC/PC48C 1.01 0.94 1.08 T*9V*C20 FC/MC/PC48D 1.01 0.94 1.08 T*9V*C20 FC/MC/PC60D 1.00 0.92 1.08 T*9V*C20 FC/MC62D 1.01 0.95 1.06 T*9V*C20 FC/PC60C 1.00 0.92 1.08 T*9V*C20 FC64D 1.02 0.98 1.04 T*9V*C20 UC48C 1.01 0.96 1.05 T*9V*C20 UC60C 1.00 0.93 1.08 T*9V*D20 FC/MC/PC48D 1.01 0.94 1.08 T*9V*D20 FC/MC/PC60D 1.00 0.93 1.08 T*9V*D20 FC/MC62D 1.01 0.96 1.05 T*9V*D20 FC64D 1.02 0.99 1.03 T*9V*D20 UC48D 1.01 0.96 1.05 T*9V*D20 UC60D 1.00 0.93 1.08 TM8X080C16MP11 FC/MC/PC48C 1.00 0.93 1.08 TM8X080C16MP11 FC/MC/PC48D 1.00 0.95 1.05 TM8X080C16MP11 FC/MC/PC60D 1.00 0.93 1.07 TM8X080C16MP11 FC/MC62D 1.00 0.95 1.05 TM8X080C16MP11 FC/PC60C 1.00 0.91 1.10 TM8X080C16MP11 FC64D 1.01 0.99 1.02 TM8X080C16MP11 UC48C 1.01 0.95 1.06 TM8X080C16MP11 UC48D 1.00 0.95 1.05 TM8X080C16MP11 UC60C 1.00 0.91 1.10 TM8X080C16MP11 UC60D 1.00 0.91 1.10 TM8X100C16MP11 FC/MC/PC48C 1.00 0.93 1.08 TM8X100C16MP11 FC/MC/PC48D 1.00 0.95 1.05 TM8X100C16MP11 FC/MC/PC60D 1.00 0.93 1.07 TM8X100C16MP11 FC/MC62D 1.00 0.95 1.05 TM8X100C16MP11 FC/PC60C 1.00 0.91 1.10 TM8X100C16MP11 FC64D 1.01 0.99 1.02 TM8X100C16MP11 UC48C 1.01 0.95 1.06 TM8X100C16MP11 UC48D 1.00 0.95 1.05
Furnace Coil MBH COP KW
TM8X100C16MP11 UC60C 1.00 0.91 1.10 TM8X100C16MP11 UC60D 1.00 0.91 1.10 TM8X100C20MP11 FC/MC/PC48C 1.00 0.94 1.06 TM8X100C20MP11 FC/MC/PC48D 1.00 0.94 1.06 TM8X100C20MP11 FC/MC/PC60D 1.00 0.93 1.07 TM8X100C20MP11 FC/MC62D 1.00 0.96 1.04 TM8X100C20MP11 FC/PC60C 1.00 0.94 1.06 TM8X100C20MP11 UC48C 1.00 0.96 1.04 TM8X100C20MP11 UC48D 1.00 0.97 1.03 TM8X100C20MP11 UC60C 0.99 0.92 1.07 TM8X100C20MP11 UC60D 1.00 0.93 1.08 TM8X120C20MP11 FC/MC/PC48C 1.00 0.94 1.06 TM8X120C20MP11 FC/MC/PC48D 1.00 0.94 1.06 TM8X120C20MP11 FC/MC/PC60D 1.00 0.93 1.07 TM8X120C20MP11 FC/MC62D 1.00 0.96 1.04 TM8X120C20MP11 FC/PC60C 1.00 0.94 1.06 TM8X120C20MP11 UC48C 1.00 0.96 1.04 TM8X120C20MP11 UC48D 1.00 0.97 1.03 TM8X120C20MP11 UC60C 0.99 0.92 1.07 TM8X120C20MP11 UC60D 1.00 0.93 1.08 TMLX080C16MP11 FC/MC/PC48C 1.00 0.93 1.08 TMLX080C16MP11 FC/MC/PC48D 1.00 0.95 1.05 TMLX080C16MP11 FC/MC/PC60D 1.00 0.93 1.07 TMLX080C16MP11 FC/MC62D 1.00 0.95 1.05 TMLX080C16MP11 FC/PC60C 1.00 0.91 1.10 TMLX080C16MP11 FC64D 1.01 0.99 1.02 TMLX080C16MP11 UC48C 1.01 0.95 1.06 TMLX080C16MP11 UC48D 1.00 0.95 1.05 TMLX080C16MP11 UC60C 1.00 0.91 1.10 TMLX080C16MP11 UC60D 1.00 0.91 1.10 TMLX100C16MP11 FC/MC/PC48C 1.00 0.93 1.08 TMLX100C16MP11 FC/MC/PC48D 1.00 0.95 1.05 TMLX100C16MP11 FC/MC/PC60D 1.00 0.93 1.07 TMLX100C16MP11 FC/MC62D 1.00 0.95 1.05 TMLX100C16MP11 FC/PC60C 1.00 0.91 1.10 TMLX100C16MP11 FC64D 1.01 0.99 1.02 TMLX100C16MP11 UC48C 1.01 0.95 1.06 TMLX100C16MP11 UC48D 1.00 0.95 1.05 TMLX100C16MP11 UC60C 1.00 0.91 1.10 TMLX100C16MP11 UC60D 1.00 0.91 1.10 TMLX100C20MP11 FC/MC/PC48C 1.00 0.94 1.06 TMLX100C20MP11 FC/MC/PC48D 1.00 0.94 1.06 TMLX100C20MP11 FC/MC/PC60D 1.00 0.93 1.07 TMLX100C20MP11 FC/MC62D 1.00 0.96 1.04 TMLX100C20MP11 FC/PC60C 1.00 0.94 1.06 TMLX100C20MP11 UC48C 1.00 0.96 1.04 TMLX100C20MP11 UC48D 1.00 0.97 1.03 TMLX100C20MP11 UC60C 0.99 0.92 1.07 TMLX100C20MP11 UC60D 1.00 0.93 1.08 TMLX120C20MP11 FC/MC/PC48C 1.00 0.94 1.06 TMLX120C20MP11 FC/MC/PC48D 1.00 0.94 1.06 TMLX120C20MP11 FC/MC/PC60D 1.00 0.93 1.07 TMLX120C20MP11 FC/MC62D 1.00 0.96 1.04 TMLX120C20MP11 FC/PC60C 1.00 0.94 1.06 TMLX120C20MP11 UC48C 1.00 0.96 1.04
Continued on next page.
82 Johnson Controls Unitary Products
Page 83
1109431-YTG-A-0714
Furnace Coil MBH COP KW
TMLX120C20MP11 U C48D 1.00 0.97 1.03 TMLX120C20MP11 U C60C 0.99 0.92 1.07 TMLX120C20MP11 U C60D 1.00 0.93 1.08 TM9E100C20MP11 FC/MC/PC48C 1.00 0.91 1.09 TM9E100C20MP11 FC/MC/PC48D 1.00 0.93 1.08 TM9E100C20MP11 FC/MC/PC60D 1.00 0.91 1.09 TM9E100C20MP11 FC/MC62D 1.00 0.95 1.05 TM9E100C20MP11 FC64D 1.01 0.98 1.03 TM9E100C20MP11 U C48C 1.01 0.94 1.08 TM9E100C20MP11 U C48D 1.01 0.95 1.06 TM9E100C20MP11 U C60D 1.00 0.91 1.10 TM9E120D20MP11 FC/MC/PC48D 1.00 0.93 1.08 TM9E120D20MP11 FC/MC/PC60D 1.00 0.92 1.08 TM9E120D20MP11 FC/MC62D 1.00 0.95 1.05 TM9E120D20MP11 FC64D 1.01 0.97 1.04 TM9E120D20MP11 U C48D 1.00 0.95 1.05 TM9E120D20MP11 U C60D 0.99 0.91 1.08 TM9X100C20MP11 FC/MC/PC48C 1.00 0.91 1.09 TM9X100C20MP11 FC/MC/PC48D 1.00 0.93 1.08 TM9X100C20MP11 FC/MC/PC60D 1.00 0.91 1.09 TM9X100C20MP11 FC/MC62D 1.00 0.95 1.05 TM9X100C20MP11 FC64D 1.01 0.98 1.03 TM9X100C20MP11 U C48C 1.01 0.94 1.08 TM9X100C20MP11 U C48D 1.01 0.95 1.06 TM9X100C20MP11 U C60D 1.00 0.91 1.10 TM9X120D20MP11 FC/MC/PC48D 1.00 0.93 1.08 TM9X120D20MP11 FC/MC/PC60D 1.00 0.92 1.08 TM9X120D20MP11 FC/MC62D 1.00 0.95 1.05 TM9X120D20MP11 FC64D 1.01 0.97 1.04 TM9X120D20MP11 U C48D 1.00 0.95 1.05 TM9X120D20MP11 U C60D 0.99 0.91 1.08 Y*LC*C16 FC/MC/PC48C 1.01 0.92 1.09 Y*LC*C16 FC/MC/PC48D 1.01 0.92 1.09 Y*LC*C16 FC/MC/PC60D 1.00 0.93 1.08 Y*LC*C16 FC/MC62D 1.01 0.97 1.04 Y*LC*C16 FC/PC60C 1.00 0.93 1.08
Furnace Coil MBH COP KW
Y*LC*C16 FC64D 1.01 0.99 1.02 Y*LC*C16 UC48C 1.01 0.96 1.05 Y*LC*C16 UC60C 1.00 0.93 1.07 Y*LC*C20 FC/MC/PC48C 1.01 0.94 1.07 Y*LC*C20 FC/MC/PC48D 1.01 0.94 1.07 Y*LC*C20 FC/MC/PC60D 1.00 0.93 1.07 Y*LC*C20 FC/MC62D 1.00 0.97 1.03 Y*LC*C20 FC/PC60C 1.00 0.93 1.07 Y*LC*C20 FC64D 1.01 1.01 1.01 Y*LC*C20 UC48C 1.01 0.96 1.05 Y*LC*C20 UC60C 1.00 0.94 1.06 Y*9C*C16 FC/MC/PC48C 1.01 0.94 1.08 Y*9C*C16 FC/MC/PC48D 1.01 0.94 1.08 Y*9C*C16 FC/MC/PC60D 1.00 0.92 1.08 Y*9C*C16 FC/MC62D 1.01 0.95 1.06 Y*9C*C16 FC/PC60C 1.00 0.92 1.08 Y*9C*C16 FC64D 1.02 0.99 1.03 Y*9C*C16 UC48C 1.01 0.94 1.08 Y*9C*C16 UC60C 1.00 0.90 1.11 Y*9C*C20 FC/MC/PC48C 1.01 0.94 1.08 Y*9C*C20 FC/MC/PC48D 1.01 0.94 1.08 Y*9C*C20 FC/MC/PC60D 1.00 0.92 1.08 Y*9C*C20 FC/MC62D 1.01 0.95 1.06 Y*9C*C20 FC/PC60C 1.00 0.92 1.08 Y*9C*C20 FC64D 1.02 0.98 1.04 Y*9C*C20 UC48C 1.01 0.96 1.05 Y*9C*C20 UC60C 1.00 0.93 1.08 Y*9C*D20 FC/MC/PC48D 1.01 0.94 1.08 Y*9C*D20 FC/MC/PC60D 1.00 0.93 1.08 Y*9C*D20 FC/MC62D 1.01 0.96 1.05 Y*9C*D20 FC64D 1.02 0.99 1.03 Y*9C*D20 UC48D 1.01 0.96 1.05 Y*9C*D20 UC60D 1.00 0.93 1.08
Johnson Controls Unitary Products 83
Page 84
1109431-YTG-A-0714
HEATING PERFORMANCE DATA - LOW CFM 1-STAGE OPERATION
OUTDOOR UNIT MODEL NO. YZH06012C INDOOR COIL MODEL NO. FC/MC62D + MV20D
AIR TEMP.
ENTERING
OUTDOOR UNIT (°F)
60
47
40
30
17
10
NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
AIR TEMP. ENTERING
INDOOR COIL (°F)
60 48.10 3.91 3.61 48.70 4.21 3.39 49.40 4.56 3.17 70 47.30 3.38 4.10 47.90 3.64 3.86 48.50 3.93 3.62 80 46.40 2.96 4.60 47.10 3.19 4.33 47.70 3.44 4.06 60 41.10 3.52 3.43 41.60 3.73 3.26 42.00 3.97 3.10 70 40.60 3.06 3.89 41.00 3.24 3.71 41.40 3.44 3.53 80 40.00 2.69 4.35 40.40 2.85 4.16 40.90 3.03 3.96 60 37.50 3.30 3.33 37.80 3.48 3.19 38.10 3.67 3.05 70 36.90 2.86 3.78 37.30 3.02 3.62 37.70 3.19 3.46 80 36.30 2.51 4.24 36.80 2.65 4.06 37.30 2.81 3.88 60 ––––––––– 70 ––––––––– 80 ––––––––– 60 ––––––––– 70 ––––––––– 80 ––––––––– 60 ––––––––– 70 ––––––––– 80 –––––––––
1125 1175 1225
MBH COP KW MBH COP KW MBH COP KW
Multipliers for determining the performance with other indoor sections. LOW CFM
Air Handler Coil MBH COP KW
– FC/MC62 1.04 0.97 1.07 AHE60D – 1.00 0.98 1.02 AHV60D – 0.99 0.97 1.02 MV20D FC/MC60D 1.00 0.96 1.05 MV20D FC/MC62D 1.00 1.00 1.00 MV20D FC64D 1.01 1.02 0.99
ID CFM
Continued on next page.
84 Johnson Controls Unitary Products
Page 85
1109431-YTG-A-0714
Furnace Coil MBH COP KW
T*(8,L)V*C16 FC/PC60C 1.00 0.90 1.11 T*(8,L)V*C20 FC/MC/PC60D 1.00 0.93 1.08 T*(8,L)V*C20 FC/MC62D 0.99 0.93 1.07 T*(8,L)V*C20 FC/PC60C 1.00 0.93 1.08 T*(8,L)V*C20 FC64D 1.01 0.98 1.04 T*(8,L)V*C20 UC60C 0.98 0.89 1.10 T*9V*C20 FC/MC/PC6 0D 1.00 0.91 1.09 T*9V*C20 FC/MC62D 1.00 0.94 1.07 T*9V*C20 FC/PC60C 1.00 0.91 1.09 T*9V*C20 FC64D 1.01 0.96 1.05 T*9V*C20 UC60C 0.99 0.90 1.10 T*9V*D20 FC/MC/PC6 0D 1.00 0.92 1.09 T*9V*D20 FC/MC62D 1.00 0.95 1.05 T*9V*D20 FC64D 1.01 0.98 1.03 T*9V*D20 UC60D 0.99 0.90 1.10 TM8X080C16MP11 FC/MC/PC60D 0.99 0.92 1.07 TM8X080C16MP11 FC/MC62D 0.99 0.94 1.05 TM8X080C16MP11 FC/PC60C 0.99 0.91 1.09 TM8X080C16MP11 FC64D 1.00 0.98 1.02 TM8X080C16MP11 U C60C 0.99 0.90 1.10 TM8X080C16MP11 U C60D 0.98 0.90 1.09 TM8X100C16MP11 FC/MC/PC60D 0.99 0.92 1.07 TM8X100C16MP11 FC/MC62D 0.99 0.94 1.05 TM8X100C16MP11 FC/PC60C 0.99 0.91 1.09 TM8X100C16MP11 FC64D 1.00 0.98 1.02 TM8X100C16MP11 U C60C 0.99 0.90 1.10 TM8X100C16MP11 U C60D 0.98 0.90 1.09 TM8X100C20MP11 FC/MC/PC60D 1.00 0.94 1.07 TM8X100C20MP11 FC/MC62D 0.99 0.96 1.03 TM8X100C20MP11 FC/PC60C 1.00 0.93 1.07 TM8X100C20MP11 U C60C 0.99 0.92 1.07 TM8X100C20MP11 U C60D 0.99 0.93 1.07 TM8X120C20MP11 FC/MC/PC60D 1.00 0.94 1.07 TM8X120C20MP11 FC/MC62D 0.99 0.96 1.03 TM8X120C20MP11 FC/PC60C 1.00 0.93 1.07 TM8X120C20MP11 U C60C 0.99 0.92 1.07 TM8X120C20MP11 U C60D 0.99 0.93 1.07 TMLX080C16MP11 FC/MC/PC60D 0.99 0.92 1.07 TMLX080C16MP11 FC/MC62D 0.99 0.94 1.05 TMLX080C16MP11 FC/PC60C 0.99 0.91 1.09 TMLX080C16MP11 FC64D 1.00 0.98 1.02 TMLX080C16MP11 U C60C 0.99 0.90 1.10 TMLX080C16MP11 U C60D 0.98 0.90 1.09 TMLX100C16MP11 FC/MC/PC60D 0.99 0.92 1.07 TMLX100C16MP11 FC/MC62D 0.99 0.94 1.05
Furnace Coil MBH COP KW
TMLX100C16MP11 FC/PC60C 0.99 0.91 1.09 TMLX100C16MP11 FC64D 1.00 0.98 1.02 TMLX100C16MP11 UC60C 0.99 0.90 1.10 TMLX100C16MP11 UC60D 0.98 0.90 1.09 TMLX100C20MP11 FC/MC/PC60D 1.00 0.94 1.07 TMLX100C20MP11 FC/MC62D 0.99 0.96 1.03 TMLX100C20MP11 FC/PC60C 1.00 0.93 1.07 TMLX100C20MP11 UC60C 0.99 0.92 1.07 TMLX100C20MP11 UC60D 0.99 0.93 1.07 TMLX120C20MP11 FC/MC/PC60D 1.00 0.94 1.07 TMLX120C20MP11 FC/MC62D 0.99 0.96 1.03 TMLX120C20MP11 FC/PC60C 1.00 0.93 1.07 TMLX120C20MP11 UC60C 0.99 0.92 1.07 TMLX120C20MP11 UC60D 0.99 0.93 1.07 TM9E100C20MP11 FC/MC/PC60D 0.99 0.89 1.11 TM9E100C20MP11 FC/MC62D 0.99 0.93 1.07 TM9E100C20MP11 FC64D 1.00 0.96 1.05 TM9E100C20MP11 UC60D 0.98 0.87 1.12 TM9E120D20MP11 FC/MC/PC60D 0.99 0.90 1.10 TM9E120D20MP11 FC/MC62D 0.99 0.93 1.07 TM9E120D20MP11 FC64D 1.00 0.94 1.06 TM9E120D20MP11 UC60D 0.98 0.90 1.09 TM9X100C20MP11 FC/MC/PC60D 0.99 0.89 1.11 TM9X100C20MP11 FC/MC62D 0.99 0.93 1.07 TM9X100C20MP11 FC64D 1.00 0.96 1.05 TM9X100C20MP11 UC60D 0.98 0.87 1.12 TM9X120D20MP11 FC/MC/PC60D 0.99 0.90 1.10 TM9X120D20MP11 FC/MC62D 0.99 0.93 1.07 TM9X120D20MP11 FC64D 1.00 0.94 1.06 TM9X120D20MP11 UC60D 0.98 0.90 1.09 Y*LC*C16 FC/PC60C 1.00 0.90 1.11 Y*LC*C20 FC/MC/PC60D 1.00 0.93 1.08 Y*LC*C20 FC/MC62D 0.99 0.93 1.07 Y*LC*C20 FC/PC60C 1.00 0.93 1.08 Y*LC*C20 FC64D 1.01 0.98 1.04 Y*LC*C20 UC60C 0.98 0.89 1.10 Y*9C*C20 FC/MC/PC60D 1.00 0.91 1.09 Y*9C*C20 FC/MC62D 1.00 0.94 1.07 Y*9C*C20 FC/PC60C 1.00 0.91 1.09 Y*9C*C20 FC64D 1.01 0.96 1.05 Y*9C*C20 UC60C 0.99 0.90 1.10 Y*9C*D20 FC/MC/PC60D 1.00 0.92 1.09 Y*9C*D20 FC/MC62D 1.00 0.95 1.05 Y*9C*D20 FC64D 1.01 0.98 1.03 Y*9C*D20 UC60D 0.99 0.90 1.10
Johnson Controls Unitary Products 85
Page 86
1109431-YTG-A-0714
HEATING PERFORMANCE DATA - HIGH CFM 2-STAGE OPERATION
OUTDOOR UNIT MODEL NO. YZH06012C INDOOR COIL MODEL NO. FC/MC62D + MV20D
AIR TEMP.
ENTERING
OUTDOOR UNIT (°F)
60
47
40
30
17
10
NOTE: ALL CAPACITIES ARE NET, WITH INDOOR FAN HEAT ALREADY DEDUCTED. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR).
AIR TEMP. ENTERING
INDOOR COIL (°F)
60 68.54.694.2869.54.864.1970.45.044.10 70 67.34.144.7668.24.304.6469.14.464.54 80 66.23.705.2567.03.845.1067.74.004.97 60 58.54.134.1558.94.264.0659.44.393.97 70 57.53.694.5758.03.804.4758.53.924.37 80 56.53.315.0057.03.414.9057.63.524.79 60 53.13.814.0853.23.904.0053.34.003.91 70 52.53.424.5052.83.514.4153.13.604.33 80 52.03.104.9252.53.184.8353.03.274.74 60 50.33.843.8448.83.893.6847.33.953.52 70 49.03.304.3648.63.394.2148.23.494.04 80 47.82.874.8848.43.004.7249.03.144.57 60 39.33.053.7840.43.183.7341.63.303.70 70 36.72.554.2238.02.704.1239.32.864.04 80 34.12.144.6735.62.314.5237.02.484.38 60 36.42.913.6636.42.953.6136.53.003.57 70 36.12.584.1136.32.624.0636.42.664.02 80 35.92.304.5636.12.354.5136.42.394.46
1550 1750 1950
MBH COP KW MBH COP KW MBH COP KW
Multipliers for determining the performance with other indoor sections.
ID CFM
HIGH CFM
Air Handler Coil MBH COP KW
– FC/MC62 1.01 0.96 1.05 AHE60D – 1.00 0.99 1.01 AHV60D – 0.99 0.96 1.03 MV20D FC/MC60D 0.99 0.96 1.03 MV20D FC/MC62D 1.00 1.00 1.00 MV20D FC64D 1.01 1.02 0.99
Continued on next page.
86 Johnson Controls Unitary Products
Page 87
1109431-YTG-A-0714
Furnace Coil MBH COP KW
T*(8,L)V*C16 FC/PC60C 0.99 0.92 1.08 T*(8,L)V*C20 FC/MC/PC60D 0.98 0.93 1.06 T*(8,L)V*C20 FC/MC62D 0.99 0.94 1.05 T*(8,L)V*C20 FC/PC60C 0.98 0.93 1.06 T*(8,L)V*C20 FC64D 1.02 1.01 1.01 T*(8,L)V*C20 UC60C 0.98 0.93 1.06 T*9V*C20 FC/MC/PC6 0D 0.99 0.92 1.08 T*9V*C20 FC/MC62D 1.00 0.95 1.05 T*9V*C20 FC/PC60C 0.99 0.92 1.08 T*9V*C20 FC64D 1.00 0.98 1.02 T*9V*C20 UC60C 0.99 0.92 1.08 T*9V*D20 FC/MC/PC6 0D 0.98 0.92 1.07 T*9V*D20 FC/MC62D 0.99 0.95 1.04 T*9V*D20 FC64D 1.00 0.98 1.02 T*9V*D20 UC60D 0.98 0.92 1.07 TM8X080C16MP11 FC/MC/PC60D 0.98 0.91 1.09 TM8X080C16MP11 FC/MC62D 0.99 0.94 1.06 TM8X080C16MP11 FC/PC60C 0.98 0.90 1.09 TM8X080C16MP11 FC64D 0.99 0.96 1.03 TM8X080C16MP11 U C60C 0.98 0.89 1.10 TM8X080C16MP11 U C60D 0.98 0.90 1.09 TM8X100C16MP11 FC/MC/PC60D 0.98 0.91 1.09 TM8X100C16MP11 FC/MC62D 0.99 0.94 1.06 TM8X100C16MP11 FC/PC60C 0.98 0.90 1.09 TM8X100C16MP11 FC64D 0.99 0.96 1.03 TM8X100C16MP11 U C60C 0.98 0.89 1.10 TM8X100C16MP11 U C60D 0.98 0.90 1.09 TM8X100C20MP11 FC/MC/PC60D 0.98 0.92 1.07 TM8X100C20MP11 FC/MC62D 0.99 0.95 1.05 TM8X100C20MP11 FC/PC60C 0.98 0.91 1.08 TM8X100C20MP11 U C60C 0.98 0.91 1.08 TM8X100C20MP11 U C60D 0.98 0.92 1.07 TM8X120C20MP11 FC/MC/PC60D 0.98 0.92 1.07 TM8X120C20MP11 FC/MC62D 0.99 0.95 1.05 TM8X120C20MP11 FC/PC60C 0.98 0.91 1.08 TM8X120C20MP11 U C60C 0.98 0.91 1.08 TM8X120C20MP11 U C60D 0.98 0.92 1.07 TMLX080C16MP11 FC/MC/PC60D 0.98 0.91 1.09 TMLX080C16MP11 FC/MC62D 0.99 0.94 1.06 TMLX080C16MP11 FC/PC60C 0.98 0.90 1.09 TMLX080C16MP11 FC64D 0.99 0.96 1.03 TMLX080C16MP11 U C60C 0.98 0.89 1.10 TMLX080C16MP11 U C60D 0.98 0.90 1.09 TMLX100C16MP11 FC/MC/PC60D 0.98 0.91 1.09 TMLX100C16MP11 FC/MC62D 0.99 0.94 1.06
Furnace Coil MBH COP KW
TMLX100C16MP11 FC/PC60C 0.98 0.90 1.09 TMLX100C16MP11 FC64D 0.99 0.96 1.03 TMLX100C16MP11 UC60C 0.98 0.89 1.10 TMLX100C16MP11 UC60D 0.98 0.90 1.09 TMLX100C20MP11 FC/MC/PC60D 0.98 0.92 1.07 TMLX100C20MP11 FC/MC62D 0.99 0.95 1.05 TMLX100C20MP11 FC/PC60C 0.98 0.91 1.08 TMLX100C20MP11 UC60C 0.98 0.91 1.08 TMLX100C20MP11 UC60D 0.98 0.92 1.07 TMLX120C20MP11 FC/MC/PC60D 0.98 0.92 1.07 TMLX120C20MP11 FC/MC62D 0.99 0.95 1.05 TMLX120C20MP11 FC/PC60C 0.98 0.91 1.08 TMLX120C20MP11 UC60C 0.98 0.91 1.08 TMLX120C20MP11 UC60D 0.98 0.92 1.07 TM9E100C20MP11 FC/MC/PC60D 0.98 0.90 1.09 TM9E100C20MP11 FC/MC62D 0.99 0.94 1.06 TM9E100C20MP11 FC64D 0.99 0.96 1.03 TM9E100C20MP11 UC60D 0.98 0.90 1.09 TM9E120D20MP11 FC/MC/PC60D 0.98 0.91 1.08 TM9E120D20MP11 FC/MC62D 0.99 0.94 1.05 TM9E120D20MP11 FC64D 0.99 0.96 1.03 TM9E120D20MP11 UC60D 0.98 0.90 1.09 TM9X100C20MP11 FC/MC/PC60D 0.98 0.90 1.09 TM9X100C20MP11 FC/MC62D 0.99 0.94 1.06 TM9X100C20MP11 FC64D 0.99 0.96 1.03 TM9X100C20MP11 UC60D 0.98 0.90 1.09 TM9X120D20MP11 FC/MC/PC60D 0.98 0.91 1.08 TM9X120D20MP11 FC/MC62D 0.99 0.94 1.05 TM9X120D20MP11 FC64D 0.99 0.96 1.03 TM9X120D20MP11 UC60D 0.98 0.90 1.09 Y*LC*C16 FC/PC60C 0.99 0.92 1.08 Y*LC*C20 FC/MC/PC60D 0.98 0.93 1.06 Y*LC*C20 FC/MC62D 0.99 0.94 1.05 Y*LC*C20 FC/PC60C 0.98 0.93 1.06 Y*LC*C20 FC64D 1.02 1.01 1.01 Y*LC*C20 UC60C 0.98 0.93 1.06 Y*9C*C20 FC/MC/PC60D 0.99 0.92 1.08 Y*9C*C20 FC/MC62D 1.00 0.95 1.05 Y*9C*C20 FC/PC60C 0.99 0.92 1.08 Y*9C*C20 FC64D 1.00 0.98 1.02 Y*9C*C20 UC60C 0.99 0.92 1.08 Y*9C*D20 FC/MC/PC60D 0.98 0.92 1.07 Y*9C*D20 FC/MC62D 0.99 0.95 1.04 Y*9C*D20 FC64D 1.00 0.98 1.02 Y*9C*D20 UC60D 0.98 0.92 1.07
Johnson Controls Unitary Products 87
Page 88
NOTES
Subject to change without notice. Published in U.S.A. 1109431-YTG-A-0714 Copyright © 2014 by Johnson Controls, Inc. All rights reserved. Supersedes: 561927-YTG-B-1213
York International Corp.
5005 York Drive
Norman, OK 73069
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use