York FRCS024 User Manual

TECHNICAL

GUIDE

SPLIT-SYSTEM AIR CONDITIONERS

14 SEER

MODELS: FRCS024 THRU 060 (2 THRU 5 NOMINAL TONS)

T C

U N

CERTIFICATION APPLIES ONLY

WHEN THE COMPLETE

SYSTEM IS LISTED

Due to continuous product improvement, specifications are subject to change without notice.

Visit us on the web at www.york.com for the most up-to-date technical information.

Additional rating information can be found at www.ari.org.

I N

WITH ARI.

N I

LISTED

036-21004-002 Rev. B (0602)

DESCRIPTION

The 14 SEER Series condensing unit is the outdoor part of a versatile system of air conditioning. It is designed to be custom-matched with one of UPG’s complete line of evaporator sections, with each serving a specific function. Matching Air Handlers are available for upflow, downflow, or horizontal applications to provide a complete system. Electric Heaters are available, if required. Add-On coils are available for use with upflow, downflow, or horizontal furnaces and air handlers.

WARRANTY

5-year limited parts warranty.

10-year limited compressor warranty.

FEATURES

• QUALITY CONDENSER COILS - The coil is constructed of copper tube and aluminum fins.

• PROTECTED COMPRESSOR - The compressor is internally protected against high pressure and temperature. This is accomplished by the simultaneous operation of high pressure relief valve and a temperature sensor which protects the compressor if undesirable operating conditions occur. A liquid line filter-drier further protects the compressor.

• DURABLE FINISH - The cabinet is made of pre-painted steel. The pre-treated galvanized steel provides a better paint to steel bond, which resists corrosion and rust creep. Special primer formulas and desert sand matted-textured finish insure less fading when exposed to sunlight.

• LOWER INSTALLED COST - Installation time and costs are reduced by easy power and control wiring connections. Discharge line heat exchanger knockouts are provided, if required. Available in sweat connect models only. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping. The small base dimension means less space is required on the ground or roof.

• TOP DISCHARGE - The warm air from the top mounted fan is blown up away from the structure and any landscaping. This allows compact location on multi-unit applications.

• LOW OPERATING SOUND LEVEL - The upward air flow carries the normal operating noise away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds.

• LOW MAINTENANCE - Long life permanently lubricated motor-bearings need no annual servicing.

• EASY SERVICE ACCESS - Fully exposed refrigerant connections, a single panel covering the electrical controls, and the molex plug in the control box connecting the condenser fan make for easy servicing of the unit.

• SECURED SERVICE VALVES - Secured re-usable ser- vice valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging.

• U.L. and C.U.L. listed - approved for outdoor application.

Certified in accordance with the Unitary Small Equipment certification program, which is based on ARI Standard 210/240.

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

036-21004-002 Rev. B (0602)

Physical and Electrical Data

MODEL

Unit Supply Voltage 208 / 230 - 1 – 60

Normal Voltage Range Minimum Circuit Ampacity 12.1 14.9 18.1 17.8 20.6 31.8

Max Overcurrent Device Amps

Compressor Type

Compressor Amps

Crankcase Heater No No No No No No Fan Motor Amps Rated Load .5 1.3 1.3 1.3 1.3 1.4 Fan Diameter Inches 22 22 22 24 24 24

Fan Motor

Coil

Liquid Line OD 3/8 3/8 3/8 3/8 3/8 3/8 Vapor Line OD 7/8 7/8 7/8 1 1/8 1 1/8 1 1/8

Unit Charge (Lbs - Oz) Charge Per Foot, oz. 0.70 0.70 0.70 0.76 0.76 0.76 Operating Weight Lbs 209 228 219 240 264 270

1. Rated in accordance with ARI Standard 110, utilization range “A”.

2. Dual element fuses or HACR circuit breaker.

3. All scrolls listed with superscript “B” are Bristol scrolls. All scrolls listed with superscripts “C” are Copeland scrolls.

4. The Unit Charge is correct for the outdoor unit, matched indoor coil and 15 feet of refrigerant tubing. For tubing lengths other than 15 feet, add or subtract the amount of refrigerant, using the difference in length multiplied by the per foot value.

Rated Load 9.3 10.9 13.5 13.2 15.5 24.3 Locked Rotor 57 64 73 95 109 150

Rated HP 1/15 1/4 1/4 1/4 1/4 1/3 Nominal RPM 830 825 825 825 825 1100 Nominal CFM 2,260 3,300 3,300 3,300 3,300 3,500 Face Area Sq Ft 19.65 23.58 23.58 22.5 27.0 27.0 Rows Deep 1 1 1 2 2 2 Fin /Inch 18 18 18 18 18 18

FRCS0241BD FRCS0301BD FRCS0361CD FRCS0421CE FRCS0481CE FRCS0601BF

187 to 252

20 20 25 30 35 50

Inertia Inertia

Scroll

8 - 0 9 - 14 9 - 6 14 - 0 14 - 3 15 - 13

All dimensions are in inches. They are subject to change wit out notice. Certified dimensions will be provided upon request

Unit

Model

Dimensions

(Inches)

B C Liquid Vapor

Refrigerant

Connection

Line Size

024 33 37 27

036 39 37 27 042 32 43 32

3/8

7/8030 39 37 27

1-1/8048 38 43 32

060 38 43 32

1. Included Fan Guard

2 Unitary Products Group

036-21004-002 Rev. B (0602)

COOLING CAPACITY - With Air Handler Coils

COOLING

SEER

W/O TXV

SEER

+ TXV

UNIT MODEL

MODEL

AIR HANDLER

ELECTRIC

HEAT KW

COIL

MODEL

RATED

CFM

NET MBH

TOTAL SENS.

1 PH 14 SEER AC WITH N-AH / G2FD

FRCS0241BD N1AHB0806 2,5,8,10 17 G2FD036S17 800 25.2 18.1 - 14.00 12.35

FRCS0301BD N1AHB1206 5,8,10,15,19 17 G2FD036S17 1000 28.8 20.7 - 13.10 11.80

N1AHB1206 5,8,10,15,19 17 G2FD036S17 1200 34.0 24.5 - 13.35 11.80

FRCS0361CD

N1AHB1206 5,8,10,15,19 17 G2FD046S17 1200 35.0 25.6 - 14.00 12.20

N1AHD1406 5,8,10,15 24 G2FD048S24 1200 35.4 25.7 - 14.00 12.50

N1AHD1406 5,8,10,15 24 G2FD060S24 1200 36.0 26.1 - 14.20 12.80

N1AHC1606 5,8,10,15,20 21 G2FD042S21 1400 39.0 28.2 - 13.25 11.35

FRCS0421CE

N1AHC1606 5,8,10,15,20 21 G2FD048S21 1400 39.5 28.9 - 13.50 11.60

N1AHD1406 5,8,10,15 24 G2FD060S24 1400 40.5 29.6 - 14.00 12.00

FRCS0481CE

FRCS0601BF

N1AHD2006 8,10,15,20,25,30 24 G2FD060S24 1600 46.5 33.9 - 13.85 11.80

N1AHD2006 8,10,15,20,25,30 24 G2FD061H24 1600 47.0 34.3 - 14.00 11.90

N1AHD2006 8,10,15,20,25,30 24 G2FD060S24 1900 53.5 37.1 - 13.50 12.00

N1AHD2006 8,10,15,20,25,30 24 G2FD061H24 2050 54.5 39.1 - 13.50 12.10

1 PH 14 SEER AC / N1VS - VARIABLE SPEED

FRCS0241BD

FRCS0301BD

FRCS0361CD

N1VSB12 10,15,18 17 G2FD036S17 870 25.6 18.1 - 15.00 13.85

N1VSB12 10,15,18 17 G2FD046S17 870 26.2 18.9 - 15.50 14.15

N1VSB12 10,15,18 17 G2FD036S17 1000 29.4 20.7 - 14.50 12.95

N1VSB12 10,15,18 17 G2FD046S17 1070 30.0 21.6 - 15.35 13.60

N1VSB12 10,15,18 17 G2FD046S17 1250 35.2 25.6 - 14.00 12.40

N1VSC16 10,15,18 21 G2FD048S21 1285 36.0 25.7 - 15.00 13.60

N1VSC16 10,15,18 21 G2FD048S21 1420 40.5 28.9 - 14.50 12.50

FRCS0421CE

N1VSC16 10,15,18 21 G2FD048S21 1420 40.5 28.9 - 14.50 12.50

N1VSD20 10,15,18,30 24 G2FD060S24 1420 41.5 29.6 - 15.50 13.20

FRCS0481CE

FRCS0601BF

FRCS0241BD

FRCS0301BD

N1VSC16 10,15,18 21 G2FD048S21 1590 46.0 33.2 - 14.30 12.20

N1VSD20 10,15,18,30 24 G2FD060S24 1600 47.0 33.9 - 14.65 12.40

N1VSD20 8,10,15,20,25,30 24 G2FD060S24 1780 53.5 36.3 - 13.75 12.35

N1VSD20 8,10,15,20,25,30 24 G2FD061H24 1780 54.5 37.0 - 14.00 12.60

1 PH 14 SEER AC / F2RP / RC / FP / FC / FV

4,5

F2RP/FP036 5,8,10,15,19 21 - 800 25.0 18.0 - 13.80 12.30

F2FP040 5,8,10,15 21 - 800 25.4 17.4 - 14.00 12.75

F2RP/FP036 5,8,10,15,19 21 - 1000 29.8 21.5 - 13.85 12.40

F2FP045 5,8,10,15 24 - 1000 30.6 21.5 - 14.00 12.70

F2RP/FP036 5,8,10,15,19 21 - 1200 34.4 24.8 - 13.50 12.10

FRCS0361CD

F2RP/FP042 5,8,10,15 21 - 1200 34.4 24.8 - 13.30 11.90

F2FP045 5,8,10,15 24 - 1200 36.0 25.5 - 14.00 12.65

FRCS0421CE

FRCS0481CE

FRCS0601BF

Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ARI Standards 210. Cooling MBH based on 80°F entering air temperature, 50% RH, and rated air flow. KW includes compressor, outdoor fan and indoor blower motor watts. Add-on coils include 365 watts/1000 CFM for blower motor. EER (Energy Efficiency Ratio) is the total cooling output in BTU’s at a 95°F outdoor ambient divided by the total electric power in watt-hours at those conditions. SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTU’s during a normal annual usage period for cooling divided by the total electric power input in watt-hours during the same period.

F2FP045 5,8,10,15 24 - 1400 40.5 29.8 - 14.00 12.00

F2FP048 5,8,10,15,20,25 24 - 1400 39.5 28.9 - 13.25 11.30

F2FP060 5,8,10,15,20,25 24 - 1600 46.0 33.4 - 13.00 11.25

F2FV060 8,10,15,20,25 24 - 1625 47.5 34.9 - 15.50 13.20

F2FP060 10,15,20,25 24 -- 1900 53.0 36.7 - 13.00 11.60

F2FV060 10,15,20,25 24 -- 1900 53.5 36.3 - 13.75 12.35

EER

1. G2FD coils available with a factory installed horizontal drain pan. See price pages for specific model number.

2. Single phase units require single phase 2HK heaters.

3. TXV = Use 1TV700 Series Kit.

4. To meet R=4.2 insulation requirements, substitute F2FP for F2RP, and F2FC for F2RC

5. FG8, FG9, and FL8 furnaces and F2RP / F2RC air handlers have B.O.D (Blower on Delay) standard.

- = Not applicable

. models. All ratings remain the same.

Unitary Products Group 3

036-21004-002 Rev. B (0602)

COOLING CAPACITY - Upflow, Downflow, & Horizontal Furnaces and Coils

UNIT MODEL

FRCS0241BD

FRCS0301BD

FRCS0361CD

FRCS0421CE

FRCS0481CE

For Notes See Page 5.

FURNACE**

CFM RANGE

(MIN.-MAX.)

700 900

875

112 5

1050 1350

1225 1575

1400 1800

14 G1FA036S14 800 25.0 18.0 13.85 - 12.30

17,21 G1FA036S17,21 800 24.8 17.9 13.85 - 12.20

- G1HD036 800 25.0 18.1 14.00 - 12.35 17 G1NA036S17L 800 24.0 16.6 13.50 - 12.00 21 G1NA048S21D 800 24.0 16.6 13.50 - 12.00 14 G1UA036S14 800 25.0 18.0 13.85 - 12.30

17,21 G1UA036S17,21 800 24.8 17.9 13.85 - 12.20

17 G2FD030S17 800 24.8 17.9 13.85 - 12.20 14 G2FD035S14 800 24.8 17.9 13.85 - 12.20 17 G2FD036S17 800 25.2 18.1 14.00 - 12.35 21 G2FD036S21 800 25.2 18.1 14.00 - 12.45 19 MDD48DSD 800 24.0 16.6 13.50 - 12.00 14 G1FA036S14 1000 28.4 20.0 13.00 - 11.75

17,21 G1FA036S17,21 1000 28.4 20.0 13.00 - 11.65 21,24 G1FA048S21,24 1000 30.0 21.8 14.00 - 12.40

- G1HD048 1000 30.0 21.5 14.00 - 12.40 17 G1NA036S17L 1000 29.0 20.0 - 13.50 11.95 24 G1NA042S24W 1000 29.0 20.7 - 14.00 12.00 21 G1NA048S21D 1000 29.0 20.0 - 13.50 11.95 14 G1UA036S14 1000 28.4 20.0 13.00 - 11.75

17,21 G1UA036S17,21 1000 28.4 20.0 13.00 - 11.65 21,24 G1UA048S21,24 1000 30.0 21.8 14.00 - 12.40

17 G2FD030S17 1000 28.4 20.4 13.00 - 11.65 17 G2FD036S17 1000 28.8 20.7 13.10 - 11.80 21 G2FD036S21 1000 28.8 21.0 13.10 - 12.10

21,24 G2FD048S21,24 1000 30.2 21.8 - 14.00 12.50

19 MDD48DSD 1000 29.0 20.0 - 13.50 11.95

21,24 G1FA048S21,24 1200 35.2 25.3 14.00 - 12.30

- G1HD048 1200 34.8 25.0 13.75 - 12.30 17 G1NA036S17L 1200 33.0 23.4 - 13.00 11.30 24 G1NA042S24W 1200 34.6 25.0 - 14.00 12.00 21 G1NA048S21D 1200 33.0 23.4 - 13.00 11.30

21,24 G1UA048S21,24 1200 35.2 25.3 14.00 - 12.30

17 G2FD036S17 1200 34.0 24.5 13.35 - 11.80 21 G2FD036S21 1200 34.0 24.8 13.35 - 12.05 21 G2FD042S21 1200 34.8 25.4 13.70 - 12.10 17 G2FD046S17 1200 35.0 25.6 14.00 - 12.20

21,24 G2FD048S21,24 1200 35.2 25.7 14.00 - 12.45

19 MDD48DSD 1200 33.0 23.4 - 13.00 11.30

21,24 G1FA048S21,24 1400 39.0 28.4 - 13.50 11.45 21,24 G1FA060S21,24 1400 40.5 29.6 - 14.00 11.80

- G1HD048 1400 39.0 28.4 - 13.25 11.50 24 G1NA042S24W 1400 40.5 29.5 - 14.00 11.75 21 G1NA048S21D 1400 39.0 27.3 - 13.00 11.50

21,24 G1UA048S21,24 1400 39.0 28.4 - 13.50 11.45 21,24 G1UA060S21,24 1400 40.5 29.6 - 14.00 11.80

21 G2FD042S21 1400 39.0 28.2 - 13.25 11.35 17 G2FD046S17 1400 39.0 28.6 - 13.50 11.45

21,24 G2FD048S21,24 1400 39.5 28.9 - 13.50 11.60

24 G2FD060S24 1400 40.5 29.6 - 14.00 11.80 19 MDD48DSD 1400 39.0 27.3 - 13.00 11.50

21,24 G1FA048S21,24 1600 45.0 32.6 - 13.40 11.50 21,24 G1FA060S21,24 1600 46.5 33.9 - 13.85 11.80

- G1HD048 1600 45.0 32.4 - 13.25 11.45 24 G1NA042S24W 1500 46.5 32.8 - 14.00 11.85 21 G1NA048S21D 1400 44.0 29.0 - 13.00 11.50

21,24 G1UA048S21,24 1600 45.0 32.6 - 13.40 11.50 21,24 G1UA060S21,24 1600 46.5 33.9 - 13.85 11.80 21,24 G2FD048S21,24 1600 45.5 33.2 - 13.50 11.60

24 G2FD060S24 1600 46.5 33.9 - 13.85 11.80 24 G2FD061H24 1600 47.0 34.3 - 14.00 11.90 19 MDD48DSD 1400 44.0 29.0 - 13.00 11.50

COIL

MODEL

RATED

CFM

NET MBH

TOTAL SENS.

COOLING

SEER + TXV

W/O TDR

SEER + TXV

+ TDR*

EER

4 Unitary Products Group

036-21004-002 Rev. B (0602)

COOLING CAPACITY - Upflow, Downflow, & Horizontal Furnaces and Coils (Continued)

COOLING

SEER + TXV

W/O TDR

UNIT MODEL

FURNACE**

CFM RANGE

(MIN.-MAX.)

COIL

MODEL

RATED

CFM

TOTAL SENS.

21,24 G1FA060S21,24 1900 53.5 37.1 - 13.25 12.00

24 G2FD060S24 1900 53.5 37.1 - 13.25 12.00

FRCS0601BF

1650 2150

24 G2FD061H24 2050 54.5 39.1 - 13.25 12.10

- G1HD060 1900 52.5 36.0 - 13.00 11.75

24 G1NA060S24T 1900 53.0 35.9 - 13.00 11.90

21,24 G1UA060S21,24 1900 53.5 37.1 - 13.25 12.00

1. TXV = Use 1TV700 Series Kit.

* Requires a 2FD Blower Time Delay unless a standard furnace is equipped with one. **

Refer to Quick Selection Chart for specific furnace match-up.

NET MBH

COOLING CAPACITY - With Variable Speed Furnaces

COOLING

SEER

W/O TXV

UNIT MODEL

VARIABLE SPEED FURNACE MODEL

COIL MODEL

1 PH 14 SEER AC - VARIABLE SPEED

RATED

CFM

NET MBH

TOTAL SENS.

G8V***12UHA G1FA036S14 14 870 25.4 18.0 - 15.00 13.60 G8V***12UHA G1UA036S14 14 870 25.4 18.0 - 15.00 13.60 G8V***12UHA G2FD035S14 14 870 25.2 17.9 - 15.00 13.50

FRCS0241BD

G9V***12DHB G2FD030S17 17 830 26.0 17.9 - 15.00 13.65 G9V***12UPB G1FA036S17 17 870 25.4 18.0 - 15.50 13.75 G9V***12UPB G1UA036S17 17 870 25.4 18.0 - 15.50 13.75 G9V***12UPB G2FD030S17 17 870 25.4 17.9 - 15.50 13.75 G9V***12UPB G2FD036S17 17 870 25.8 18.1 - 15.50 13.90 G8V***12UHA G1FA036S14 14 1000 28.8 20.0 - 13.50 12.50 G8V***12UHA G1UA036S14 14 1000 28.8 20.0 - 13.50 12.50

FRCS0301BD

G8V***16UHB G2FD036S17 17 1000 30.0 20.7 - 14.50 13.35 G9V***12DHB G2FD036S17 17 1040 30.2 20.7 - 14.00 12.50 G9V***12UPB G2FD036S17 17 1020 29.2 20.7 - 14.00 12.65 G8V***16UHB G2FD036S17 17 1200 34.4 24.5 - 14.00 12.70 G8V***20UHC G1FA048S21 21 1200 36.2 25.3 - 15.50 14.15 G8V***20UHC G1UA048S21 21 1200 36.2 25.3 - 15.50 14.15

FRCS0361CD

G8V***20UHC G2FD036S21 21 1200 34.6 24.8 - 14.65 13.05 G8V***20UHC G2FD048S21 21 1200 36.0 25.7 - 15.50 13.95 G9V***12DHB G2FD036S17 17 1130 34.8 24.5 - 14.20 12.60 G9V***20DHD G2FD048S24 24 1195 36.2 25.7 - 14.50 13.10 G9V***12UPB G2FD036S17 17 1200 34.4 24.5 - 14.00 12.65 G8V***20UHC G1FA048S21 21 1400 39.5 28.4 - 14.50 12.45 G8V***20UHC G1FA060S21 21 1400 41.0 29.6 - 15.00 12.80 G8V***20UHC G1UA048S21 21 1400 39.5 28.4 - 14.50 12.45 G8V***20UHC G1UA060S21 21 1400 41.0 29.6 - 15.00 12.80

FRCS0421CE

G8V***20UHC G2FD042S21 21 1400 39.5 28.2 - 14.00 12.30 G8V***20UHC G2FD048S21 21 1420 40.0 28.9 - 14.50 12.60 G8V***20UHC G2FD048S21 21 1420 40.0 28.9 - 14.50 12.50 G9V***20DHD G2FD048S24 24 1365 41.0 28.9 - 14.40 12.50 G9V***20DHD G2FD060S24 24 1420 41.5 33.8 - 14.40 12.55 G8V***20UHC G1FA060S21 21 1605 46.5 33.9 - 14.00 12.20

FRCS0481CE

G8V***20UHC G1UA060S21 21 1605 46.5 33.9 - 14.00 12.20 G8V***20UHC G2FD048S21 21 1605 45.5 33.2 - 13.50 12.00 G9V***20DHD G2FD060S24 24 1580 47.0 33.9 - 13.80 12.20 G9V***20DHD G2FD060S24 24 1580 52.5 34.3 - 13.50 12.2 G8V***20UHD G1FA060S21 21 1630 53.0 34.9 - 13.60 12.4 G8V***20UHD G1UA060S21 21 1630 53.0 34.9 - 13.60 12.4 G9V***20UPC G1FA060S21 21 1590 53.0 34.5 - 13.50 12.4

FRCS0601BF

G9V***20UPC G1UA060S21 21 1590 53.0 34.5 - 13.50 12.4 G9V***20UPD G1FA060S24 24 1560 53.0 34.4 - 13.75 12.5 G9V***20UPD G1UA060S24 24 1560 53.0 34.4 - 13.75 12.5 G9V***20UPD G2FD060S24 24 1560 53.0 34.4 - 13.75 12.5 G9V***20UPD G2FD061H24 24 1560 53.5 34.9 - 14.00 12.8

1. G2FD coils available with a factory installed horizontal drain pan. See price pages for specific model number.

2. TXV = Use 1TV700 Series Kit.

3. Variable speed furnaces have B.O.D (Blower on Delay) standard.

SEER + TXV

+ TDR*

SEER

+ TXV

EER

Unitary Products Group 5

+ 11 hidden pages