York CC10, CC12, CC18, CCB12, CC15 User Manual

Single and Twin
Centrifugal Cabinet Fans,
CC-Series

TABLE OF CONTENTS

3 Introduction,Certications,

Features&Benets

4 Options&Accessories

5 TypicalApplications&BeltDrive

PerformanceDataOverview

6 DimensionalData

8 PerformanceData

10 EngineeringSpecications

YORK® SINGLE AND TWIN CENTRIFUGAL CABINET FANS, CC-SERIES

INTRODUCTION

CabinetFans

YORK® by Johnson Controls CC-Series (models CC and
CCB) belt drive cabinet fans are general purpose duct blowers.
These versatile, quiet operating air movers provide economical,
convenient and effective ventilation in ducted systems. They are
also used extensively in heating and cooling systems. Four sizes
cover an air capacity range up to 6350 CFM. CC units are sized
with space saving in mind and furnished with inlet and outlet

connecting anges and side access panels as standard. CCB
units are dual units placed side-by-side to maximize airow and

minimize overall footprint. Optional accessories include a duct

mounted lter assembly.

Model:CC

• Static pressure up to 1.5” wg.

• Belt Drive - Flow capacity up to 6,350 CFM

Model:CCB

• Static pressure up to 1.5” wg.

• Belt Drive - Flow capacity up to 12,700 CFM

CERTIFICATIONS & LISTINGS

AMCACertication

YORK® by Johnson Controls certies that the
CC-Series models shown herein are licensed
to bear the AMCA Seal. The ratings shown
are based on tests and procedures performed
in accordance with AMCA Standard 211 and
comply with the requirements of the AMCA

Certied Ratings Program.

FEATURES & BENEFITS

InternalMotorandDriveAssembly

The motor and drive assembly are located inside of the unit for
safety. This design also cools the motor so the unit will run more

efciently.

BallBearingMotor

CC-Series cabinet fans utilize ball bearing motors for durability
and long life.

EasyAccessSidePanels

CC-Series cabinet fans come with dual side panels. These panels

are easily removable which allows for installation exibility.

ULandcULCertication

CC-Series cabinet fans carry the UL label

(ZACT/ZACT7), le #E28413.

BlowerShaftBallBearings

The blower shaft rides on ball bearings for quiet operation.

ApplicationVersatility

CC-Series cabinet fans can be used for supply or exhaust.

ModelCCBTwinUnit

The twin assembly doubles the capacity of a single unit for the
same static pressure with identical RPM. Two similar motors are

used which enables the exibility of independent operation when

desired.

3

YORK® SINGLE AND TWIN CENTRIFUGAL CABINET FANS, CC-SERIES

OPTIONS & ACCESSORIES

AcousticallyInsulatedHousing

Optional insulation to line housing for acoustic sensitive applications.

VibrationIsolation

CC-Series cabinet fans can be supplied with vibration hangers. Vibration hangers allow the fan to be isolated from the building
structure which prevents any building resonance from being transmitted to the fan housing.

Guards

CC-Series cabinet fans can be supplied with inlet and outlet guards for safety.

InternalWiring

Standard wiring is NEMA 1 rated. NEMA 3R wiring is available as an optional upgrade.

SafetyDisconnectSwitch

Safety disconnect switches are available to allow positive electrical shut-off and safety. Switches are
factory mounted when factory wiring is requested. Wiring is only run from the motor to the junction box.

(Factory wiring of explosion proof applications is not available.) A wide range of NEMA rated enclosures

with disconnect switches are available for indoor, outdoor, and explosion proof installations. Disconnects

are to be eld wired by a licensed electrician.

Filters

ZF-Series lters are designed for compatibility
with model CC cabinet fans. ZF lters can be

close-coupled to CC unit inlets or installed
remote in the system ductwork. The compact
design and ease of maintenance also make ZF

lters an ideal choice as a standard duct lter.
The lter media can be easily cleaned and is

washable with plain soap and water. The pull­out drawer action provides quick and easy

access. One lter is required for model CC and
two lters for model CCB.

E

C

A

D

C

D

B

Size A B C D E

ZF1 22 1/4 20 20 1/8 17 7/8 5 3/4

ZF2 27 23 24 7/8 20 7/8 5 3/4

ZF3 33 1/2 28 30 1/4 24 3/4 5 3/4

ZF4 42 34 38 5/8 30 5/8 5 3/4

All dimensions in inches.

4