York AVC Technical Guide

Download

Page 1

TECHNICAL GUIDE

SINGLE PIECE ECM AIR HANDLERS

FOR USE WITH SPLIT-SYSTEM AIR CONDITIONERS & HEAT PUMPS

MODELS: AHV18 THRU 60

Due to continuous product improvement, specifications are subject to change without notice.

Visit us on the web at:

www.upgnet.com and www.york.com

Additional rating information can be found at:

www.ahridirectory.org

WARRANTY

Standard 5-year limited parts warranty.

Extended 10-year limited parts warranty when product is registered online within 90 days of purchase for replacement or closing for new home construction.

ISO 9001

Certified Quality

Management System

1169507-YTG-A-1114

DESCRIPTION

The AHV Air Handler line offers the ultimate in comfort, sound and application flexibility. This unit may be used for upflow, downflow, horizontal right, or horizontal left applications. No special kits are required to install this deluxe product.036-21047-001 Rev. A (4/00)

Air handlers are shipped with “Flex-coils” without a factory installed metering device. Flex coil models allow these coils to be used with R-22 or R-410A for added flexibility to meet refrigerant choices. An orifice metering device or a R-410A TXV should be installed in the field to meet your system requirements.

FEATURES

Thermostatic Expansion Valve - Provides the ultimate refrigerant

control required for today’s high efficient product. The UPG bolt-on TXV provides easy installation to convert the air handler to the required refrigerant, which is a true bolt-on design that does not requir e brazing to replace or install.

Rust-proof Plastic Drain Pans - The vertical and horizontal drain

pans in these units are made of a fiberglass reinforced thermoset polymer that will not rust or compromise stability at high temperatures.

Insulated Cabinet - All air handler cabinets are thermally insulated

with 3/4” foil faced insulation to prevent sweating.

Factory Sealed - Achieves 2% or less total airflow leakage rate at

duct leakage test conditions for system airflow verification.

Durable Finish Inside and Out - Air handler casings are made of

pre-painted galvanized steel which provides a better paint to steel bond that resists corrosion and rust creep. All internal coil sheet metal parts are made of G60 galvanized or prepainted G30 galvanized steel.

Filters - All models have internal filter racks provided for use with 1”

thick standard size filters.

Electric Heat Kits - The 6HK series of field installed electric heat kits

are available for installation friendly and easy service applications. These 6HK kits have heat capacities from 2 kW to 25 kW to meet the application requirements.

ECM Variable S peed Motor - Designed for efficient, quiet operation

with added indoor comfort control. With the use of a humidistat, the system will monitor the humidity in the home and automatically keep the desired humidity level in both winter and summer seasons. The ECM motor utilizes only 24% of the energy used by standard blower motors to reduce your overall heating and cooling costs.

The climate comfort system allows dealer to customize comfort settings based on regional location.

Communications - These models may be connected as part of a

communications system using a 4-wire connection bus.

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

Page 2

1169507-YTG-A-1114

Blower Compartment

Service

Disconnect

Panel

Drain Pan Connections for Horizontal Applications

Refrigerant Connections

Drain Connections

for Upflow

Applications

7-11/32”

1-1/2”

Top Outlet

Dimensions

Filter Access

20-5/16”

Bottom Inlet Dimensions

13”

A024-001

DIMENSIONS & DUCT CONNECTION DIMENSIONS

Dimensions

Dimensions Wiring Knockouts Refrigerant

Models

AHV18B3X(H,T)21 AHV24B3X(H,T)21 AHV30B3X(H,T)21 AHV36C3X(H,T)21 AHV42D3X(H,T)21

AHV60D3X(H,T)21

1. Actual size (Conduit size).

ABC

DEF

Height Width Depth Power Control Liquid Vapor

46” 17 1/2”

16 1/2” 13-29/32" 16 1/2” 46” 17 1/2” 16 1/2” 13-29/32" 16 1/2” 46” 17 1/2” 16 1/2” 13-29/32" 16 1/2” 52” 21” 21 1/2” 17-13/32" 20”

21 1/2”

57’ 24 1/2” 26” 20-29/32" 23-1/2”

57” 24 1/2” 26” 20-29/32" 23-1/2”

7/8" (1/2")

1-3/8"(1")

7/8" (1/2") 3/8"

1-23/32" (1-1/4")

Connections

Line Size

3/4"

7/8"AHV48D3X(H,T)21 57” 24 1/2” 26” 20-29/32" 23-1/2”

COIL TECHNICAL DATA

Models Application

Refrig.

Conn. Types

AHV18B3X(H,T)21 Cooling /Heat Pump Sweat 3.4 2 14 (2) 14 x 17.5 1 x 0.866 3/8 Enhanced AHV24B3X(H,T)21 Cooling /Heat Pump Sweat 3.9 3 12 (2) 16 x 17.5 1 x 0.866 3/8 Enhanced AHV30B3X(H,T)21 Cooling /Heat Pump Sweat 3.9 3 12 (2) 16 x 17.5 1 x 0.866 3/8 Enhanced AHV36C3X(H,T)21 Cooling /Heat Pump Sweat 4.9 3 12 (2) 20 x 17.5 1 x 0.866 3/8 Enhanced AHV42D3X(H,T)21 Cooling /Heat Pump Sweat 5.4 3 12 (2) 22 x 17.5 1 x 0.866 3/8 Enhanced AHV48D3X(H,T)21 Cooling /Heat Pump Sweat 5.8 3 11 (2) 24 x 17.5 1 x 0.866 3/8 Enhanced AHV60D3X(H,T)21 Cooling /Heat Pump Sweat 6.8 3 12 (2) 28 x 17.5 1 x 0.866 3/8 Enhanced

2 Johnson Controls Unitary Products

Face Area

(Sq. Ft.)

Rows

Deep

Fins

Per In.

Coil Size

Tube

Geometry

Tube

Dia.

Fin

Type

Page 3

1169507-YTG-A-1114

COOLING CAPACITY

Models

AHV18B

AHV24B

AHV30B

AHV36C

For notes see Page 4.

Rated CFM

610

850

585

795

985

585

795

985

730

855

1000

1190

Entering Air

Dry/Wet Bulb (°F)

MBH@ Evap. Temp. and Corresponding R-410A Pressure (°F/PSIG)

35/107.9 40/118.9 45/130.7 50/143.3

85/72 37.9 33.7 28.3 23.3 80/67 31.8 27 22.5 17.6 75/62 26.4 21.5 16.7 11.6 70/57 20.7 18.4 15.8 13.5 85/72 49.7 43.2 36.9 28.4 80/67 42.1 35.1 28.8 22.5 75/62 33.7 28 21.4 14.7 70/57 26.5 23.8 20.3 16.9 85/72 38.7 34.4 30.1 24.7 80/67 33.6 28.9 23.9 18.9 75/62 27.2 22.7 17.8 12.8 70/57 21.2 18.6 16.2 13.7 85/72 50.8 45.2 38.4 32.0 80/67 43.7 36.8 31 24.0 75/62 35.7 29.5 23.1 16.1 70/57 27.9 24.5 21 17.6 85/72 64.9 54 45.6 37.8 80/67 52.3 44.6 36.9 28.4 75/62 42.2 35.2 26.8 19.3 70/57 33.6 29.6 25.4 21.4 85/72 38.7 34.4 30.1 24.7 80/67 33.6 28.9 23.9 18.9 75/62 27.2 22.7 17.8 12.8 70/57 21.2 18.6 16.2 13.7 85/72 50.8 45.2 38.4 32.0 80/67 43.7 36.8 31 24.0 75/62 35.7 29.5 23.1 16.1 70/57 27.9 24.5 21 17.6 85/72 64.9 54 45.6 37.8 80/67 52.3 44.6 36.9 28.4 75/62 42.2 35.2 26.8 19.3 70/57 33.6 29.6 25.4 21.4 85/72 49.3 45.2 38.3 31.4 80/67 43 37.3 31 24.0 75/62 34.7 28.8 22.8 16.2 70/57 26.8 23.4 20.4 16.9 85/72 59.1 51 44.1 36.5 80/67 49.3 42.4 35.4 27.6 75/62 39.9 33.1 26.1 18.2 70/57 31.1 26.9 23.5 19.7 85/72 65.2 59.5 51.2 41.3 80/67 56.4 48.3 39.9 31.3 75/62 45.8 38.1 29.7 20.8 70/57 35.7 31.2 26.9 22.6 85/72 67.5 65.9 59.8 48.7 80/67 64.9 56.7 46.2 35.7 75/62 53.5 43.2 34.1 24.0 70/57 41.4 36.6 31.5 26.2

Johnson Controls Unitary Products 3

Page 4

1169507-YTG-A-1114

COOLING CAPACITY

Models

AHV42D

AHV48D

AHV60D

1. Actual capacity varies with the outdoor AC or HP that is used with the system.

2. Airflow is calculated for each system tonnage.

(Continued)

Rated CFM

820

1000

1180

1385

1000

1195

1385

1600

1190

1390

1565

1835

Entering Air

Dry/Wet Bulb (°F)

85/72 56.6 51.1 42.8 35.6 80/67 48.6 41.1 34.8 27.6 75/62 39.4 33 26 18.3 70/57 30.5 26.6 23.1 19.6 85/72 65.7 61 52.7 42.9 80/67 58 49.6 41.1 32.1 75/62 46.7 38.9 30.4 21.8 70/57 36.4 31.6 27.6 23.3 85/72 67.9 71.4 60.2 48.8 80/67 65.6 56.9 47.1 37.1 75/62 53.8 45.2 34.7 24.6 70/57 42.2 37.1 31.9 27.0 85/72 69.4 81 68 57.2 80/67 77.1 65.4 54.1 41.6 75/62 62.1 51 39.8 28.1 70/57 48.1 42.5 36.8 30.6 85/72 69 59.8 51.3 41.5 80/67 56.5 48.2 39.7 29.9 75/62 45.1 36.8 28.3 18.9 70/57 34.4 31 26.8 22.5 85/72 79.5 69.7 59.9 48.6 80/67 65.2 55.5 45.5 34.9 75/62 52.2 42.5 32.6 21.8 70/57 40.1 36.1 31.1 26.2 85/72 90 78.1 66 54.5 80/67 73.5 62.7 51.3 38.7 75/62 59.2 48.2 36.9 24.0 70/57 45.2 41 35.4 29.7 85/72 102.2 90 74.3 60.4 80/67 83.6 70.6 57.2 43.1 75/62 66.1 54 41.2 27.0 70/57 50.7 46.1 39.8 33.4 85/72 83.6 73.7 62.9 51.6 80/67 68.2 58.4 48.4 37.1 75/62 54.9 45.3 34.8 23.9 70/57 42.2 37.3 31.9 26.9 85/72 95.9 84.1 71.9 58.8 80/67 79.2 67.4 54.4 41.6 75/62 62.4 51.2 39.7 26.9 70/57 48 42.5 36.8 30.6 85/72 106.3 94.2 78.5 63.5 80/67 87.6 73.9 60.2 45.9 75/62 69.3 56.8 43.5 29.7 70/57 53.1 46.9 40.5 34.1 85/72 122.1 107.1 90.9 72.6 80/67 100.2 85.9 69.8 51.8 75/62 79.7 65.3 49.8 32.9 70/57 60.8 54.1 46.4 38.7

MBH@ Evap. Temp. and Corresponding R-410A Pressure (°F/PSIG)

35/107.9 40/118.9 45/130.7 50/143.3

4 Johnson Controls Unitary Products

Page 5

1169507-YTG-A-1114

APPLICATION FACTORS - RATED CFM VS. ACTUAL CFM

% Of Rated Airflow (CFM)

Capacity Factor

80% 90% 100% 110% 120%

0.96 0.98 1.00 1.02 1.03

PHYSICAL & ELECTRICAL DATA - COOLING ONLY

ECM MODELS

Models

Blower - Diameter x Width Motor

Nominal RPM Voltage Full Load Amps @230V

AHV18B AHV24B AHV30B AHV36C AHV42D AHV48D AHV60D

10 x 8 10 x 8 10 x 8 11 x 10 11 x 10 11 x 10 11 x 10

1/3 HP 1/3 HP 1/3 HP 1/2 HP 1/2 HP 3/4 HP 3/4 HP

1050 1050 1050 1050 1050 1050 1050

208/230 208/230 208/230 208/230 208/230 208/230 208/230

2.3 2.3 2.3 3.2 3.2 4.9 4.9

Type DISPOSABLE OR PERMANENT

Filter

Size

Permanent Type Kit Shipping /

Operating Weight (lbs.)

1. Field supplied.

16 x 20 x 1 16 x 20 x 1 16 x 20 x 1 20 x 20 x 1 22 x 20 x 1 22 x 20 x 1 22 x 20 x 1

1PF0601BK 1PF0601BK 1PF0601BK 1PF0602BK 1PF0603BK 1PF0603BK 1PF0603BK

116/104 121/106 121/106 153/138 169/151 172/154 175/157

KW & MBH CONVERSIONS - FOR TOTAL POWER INPUT REQUIREMENT

For a power distribution voltage that is different than the provided nominal voltage, multiply the kW and MBH data from the table by the conversion factor in the following table.

DISTRIBUTION POWER NOMINAL VOLTAGE CONVERSION FACTOR

208V 240V 0.75 220V 240V 0.84 230V 240V 0.92

ELECTRICAL DATA - COOLING ONLY

Models

Motor FLA

208V 230V 208V 230V

Minimum Circuit Ampacity

MOP

AHV18B, AHV24B, AHV30B 2.7 2.3 3.4 2.9 15 14

AHV36C, AHV42D 3.6 3.2 4.5 4.0 15 14 AHV48D, AHV60D 5.3 4.9 6.6 6.1 15 14

1. FLA = Full Load Amps.

2. MOP = Maximum Overcurrent Protection device; must be HACR type circuit breaker or time delay fuse.

3. 75C, copper wire only. If wire other than non-plated, 75C ambient, copper wire is used, consult applicable tables of the NEC and local codes..

ELECTRICAL HEAT: MINIMUM FAN SPEED

Heater Kit Models

2,3

Nom. kW

@240V

Air Handler Models

AHV18B AHV24B AHV30B AHV36C AHV42D AHV48D AHV60D

6HK(0,1)6500206 2.4kW Low (D) Low (D) Low (D) Low (D) Low (D) Low (D) Low (D) 6HK(0,1)6500506 4.8kW Low (D) Low (D) Low (D) Low (D) Low (D) Low (D) Low (D) 6HK(0,1)6500806 7.7kW Med-Low (C) Low (D) Low (D) Low (D) Low (D) Low (D) Low (D) 6HK(0,1)6501006

6HK06501025

9.6kW Med-Low (C) Low (D) Low (D) Low (D) Low (D) Low (D) Low (D)

6HK(1,2)6501306 12.5kW - Med-Low (C) Med-Low (C) Low (D) Low (D) Low (D) Low (D) 6HK(1,2)6501506

6HK06501525

6HK(1,2)6501806

6HK06501825

6HK(1,2)6502006

6HK16502025

6HK(1,2)6502506

6HK16502525

1. The referenced letter in this table is for the heat jumper tap.

2. (0,1) - 0 = no circuit breaker OR 1 = with circuit breaker.

3. (1,2) - 1 = with circuit breaker, no breaker jumpe r bar OR 2 = with circuit breaker & breaker jumper bar.

14.4kW - Med-Low (C) Med-Low (C) Med-Low (C) Low (D) Low (D) Low (D)

17.3kW - - - Med-Low (C) Med-Low (C) Low (D) Low (D)

19.2kW - - - Med-High (B) Med-High (B) Low (D) Low (D)

24kW------Low (D)

Minimum Wire

Size (AWG)

Johnson Controls Unitary Products 5

Page 6

1169507-YTG-A-1114

ELECTRIC HEAT PERFORMANCE DATA: 208/230-1-60 & 208/230-3-60

Heater

Models

1,2

Nominal kW

@240V

Total Heat

kW MBH W1 Only W1 + W2

208V 230V 208V 230V 208V 230V 208V 230V

6HK(0,1)6500206 2.4 1.8 2.2 6.2 7.5 1.8 2.2 1.8 2.2 6HK(0,1)6500506 4.8 3.6 4.4 12.3 15.0 3.6 4.4 3.6 4.4 6HK(0,1)6500806 7.7 5.8 7.1 19.7 24.1 5.8 7.1 5.8 7.1 6HK(0,1)6501006 9.6 7.2 8.8 24.6 30.1 7.2 8.8 7.2 8.8

1PH

6HK(1,2)6501306 12.5 9.4 11.5 32.0 39.2 3.1 3.8 9.4 11.5 6HK(1,2)6501506 14.4 10.8 13.2 36.9 45.1 3.6 4.4 10.8 13.2 6HK(1,2)6501806 17.3 13.0 15.9 44.3 54.2 6.5 7.9 13.0 15.9 6HK(1,2)6502006 19.2 14.4 17.6 49.2 60.2 7.2 8.8 14.4 17.6 6HK(1,2)6502506 24.0 18.0 22.0 61.5 75.2 7.2 8.8 18.0 22.0

6HK06501025 9.6 7.2 8.8 24.6 30.1 7.2 8.8 7.2 8.8 6HK06501525 14.4 10.8 13.2 36.9 45.1 10.8 13.2 10.8 13.2

3PH

6HK06501825 17.3 13.0 15.9 44.3 54.2 13.0 15.9 13.0 15.9 6HK16502025 19.2 14.4 17.6 49.2 60.2 7.2 8.8 14.4 17.6 6HK16502525 24.0 18.0 22.0 61.5 75.2 9.0 11.0 18.0 22.0

1. (0,1) - 0 = no circuit breaker OR 1 = with circuit breaker.

2. (1,2) - 1 = with circuit breaker, no breaker jumper bar OR 2 = with circuit breaker & breaker jumper bar.

3. For different power distributions, see conversion table on Page 5.

kW Staging

ELECTRICAL DATA FOR SINGLE SOURCE POWER SUPPLY - 208/230-1-60

Air Handler

Models

AHV18B

AHV24B AHV30B

AHV36C AHV42D

AHV48D

For notes see Page 7.

Heater

1,2

Models

6HK(0,1)6500206 10.0 14.2 15.4 15 20 12 12 6HK(0,1)6500506 20.0 25.0 27.9 30 30 10 10 6HK(0,1)6500806 32.0 38.0 42.9 40 45 8 8 6HK(0,1)6501006 40.0 46.7 52.9 50 60 8 6 6HK(0,1)6500206 10.0 14.2 15.4 15 20 12 12 6HK(0,1)6500506 20.0 25.0 27.9 30 30 10 10 6HK(0,1)6500806 32.0 38.0 42.9 40 45 8 8 6HK(0,1)6501006 40.0 46.7 52.9 50 60 8 6 6HK(1,2)6501306 52.0 59.7 67.9 60 70 6 4 6HK(1,2)6501506 60.0 68.4 77.9 70 80 4 4 6HK(0,1)6500206 10.0 15.3 16.5 20 20 12 12 6HK(0,1)6500506 20.0 26.2 29.0 30 30 10 10 6HK(0,1)6500806 32.0 39.2 44.0 40 45 8 8 6HK(0,1)6501006 40.0 47.8 54.0 50 60 8 6 6HK(1,2)6501306 52.0 60.8 69.0 70 70 6 4 6HK(1,2)6501506 60.0 69.5 79.0 70 80 4 4 6HK(1,2)6501806 72.0 82.5 94.0 90 100 3 3 6HK(1,2)6502006 80.0 91.2 104.0 100 110 3 3 6HK(0,1)6500206 10.0 17.5 18.6 20 20 12 12 6HK(0,1)6500506 20.0 28.3 31.1 30 35 10 8 6HK(0,1)6500806 32.0 41.3 46.1 45 50 8 8 6HK(0,1)6501006 40.0 50.0 56.1 50 60 8 6 6HK(1,2)6501306 52.0 63.0 71.1 70 80 6 4 6HK(1,2)6501506 60.0 71.6 81.1 80 90 4 4 6HK(1,2)6501806 72.0 84.6 96.1 90 100 4 3 6HK(1,2)6502006 80.0 93.3 106.1 100 110 3 2

Heater

Amps

@240V

Min. Circuit Ampacity

208V 230V 208V 230V 208V 230V

Field Wiring

MOP.

Min Wire Size (AWG)

6 Johnson Controls Unitary Products

Page 7

1169507-YTG-A-1114

ELECTRICAL DATA FOR SINGLE SOURCE POWER SUPPLY - 208/230-1-60

Air Handler

Models

Heater

Models

1,2

Heater

Amps

@240V

Min. Circuit Ampacity

208V 230V 208V 230V 208V 230V

6HK(0,1)6500206 10.0 17.5 18.6 20 20 12 12 6HK(0,1)6500506 20.0 28.3 31.1 30 35 10 8 6HK(0,1)6500806 32.0 41.3 46.1 45 50 8 8 6HK(0,1)6501006 40.0 50.0 56.1 50 60 8 6

AHV60D

6HK(1,2)6501306 52.0 63.0 71.1 70 80 6 4 6HK(1,2)6501506 60.0 71.6 81.1 80 90 4 4 6HK(1,2)6501806 72.0 84.6 96.1 90 100 4 3 6HK(1,2)6502006 80.0 93.3 106.1 100 110 3 2 6HK(1,2)6502506 100.0 115.0 131.1 125 150 2 1/0

1. (0,1) - 0 = no circuit breaker OR 1 = with circuit breaker.

2. (1,2) - 1 = with circuit breaker, no breaker jumpe r bar OR 2 = with circuit breaker & breaker jumper bar.

3. MOP = Maximum Overcurrent Protection device; must be HACR type circuit breaker or time delay fuse.

4. Stated sizes are for 75°C, copper wire only. If wire other than non-plated, 75°C ambient, copper wire is used, consult applicable tables of the NEC and local codes.

Field Wiring

MOP.

Min Wire Size (AWG)

ELECTRICAL DATA FOR SINGLE SOURCE POWER SUPPLY - 208/230-3-60

Air Handler Models

AHV24B AHV30B

Heater

Models

6HK06501025 23.1 28.4 31.8 30 35 10 8 6HK06501525 34.6 40.9 46.1 45 50 8 8

Heater

Amps

@ 240V

Min. Circuit Ampacity

208V 230V 208V 230V 208V 230V

6HK06501025 23.1 29.5 32.9 30 35 10 8

AHV36C AHV42D

6HK06501525 34.6 42.0 47.3 45 50 8 8 6HK06501825 41.6 49.6 56.0 50 60 8 6

6HK16502025

46.2 54.6 61.8 60 70 6 6

6HK06501025 23.1 31.7 35.0 35 35 8 8

AHV48D

6HK06501525 34.6 44.1 49.4 45 50 8 8 6HK06501825 41.6 51.7 58.1 60 60 6 6

6HK16502025

46.2 56.7 63.9 60 70 6 6

6HK06501025 23.1 31.7 35.0 35 35 8 8 6HK06501525 34.6 44.1 49.4 45 50 8 8

AHV60D

1. MOP = Maximum Overcurrent Protection device; must be HACR type circuit breaker or time delay fuse.

2. Stated sizes are for 75°C, copp er wire only. If wire other t han n on-pl ated, 75°C ambie nt, copper wire is used, consult app licable t able s of the NEC and local code s..

3. The 20kW and 25kW heater models (6HK16502025 an d 6HK16502525) come with circuit breakers sta ndard. Singl e source power MCA and MOP requirement s are given here only for reference if used with field installed single point power modification.

6HK06501825 41.6 51.7 58.1 60 60 6 6 6HK16502025 6HK16502525

3 3

46.2 56.7 63.9 60 70 6 6

57.7 69.1 78.3 70 80 4 4

Field Wiring

MOP

Min. Wire Size (AWG)

Johnson Controls Unitary Products 7

Page 8

1169507-YTG-A-1114

UPFLOW

HORIZONTAL RIGHT

HORIZONTAL LEFT

HEAT

DOWNFLOW

HEAT

ELECTRICAL DATA FOR MULTI-SOURCE POWER SUPPLY: 208/230-1-60

MOP

1st

2nd 3rd

Min. Wire Size (AWG)

2nd 3rd

1st

Air

Handlers

Models

AHV24B AHV30B

Min. Circuit Ampacity

208V 230V 208V 230V 208V 230V

Circuit Circuit Circuit

1st

2nd 3rd

1st

2nd 3rd

1st

2nd 3rd

Heater

Models

Total

Heater

Amps @240

6HK16501306 52.0 22.2 37.6 – 24.6 43.3 – 25 40 – 25 45 – 10 8 – 10 8 – 6HK16501506 60.0 25.1 43.3 – 27.9 50.0 – 30 45 – 30 50 – 10 8 – 10 8 – 6HK16501306 52.0 23.3 37.6 – 25.7 43.3 – 25 40 – 30 45 – 10 8 – 10 8 –

AHV36C AHV42D

6HK16501506 60.0 26.2 43.3 – 29.0 50.0 – 30 45 – 30 50 – 10 8 – 10 8 – 6HK16501806 72.0 43.5 39.0 – 49.0 45.0 – 45 40 – 50 45 –88–88– 6HK16502006 80.0 47.8 43.3 – 54.0 50.0 – 50 45 – 60 50 –88–68– 6HK16501306 52.0 25.4 37.6 – 27.8 43.3 – 30 40 – 30 45 – 10 8 – 10 8 –

AHV48D

6HK16501506 60.0 28.3 43.3 – 31.1 50.0 – 30 45 – 35 50 – 10 8–88– 6HK16501806 72.0 45.6 39.0 – 51.1 45.0 – 50 40 – 60 45 –88–68– 6HK16502006 80.0 49.9 43.3 – 56.1 50.0 – 50 45 – 60 50 –88–68– 6HK16501306 52.0 25.4 37.6 – 27.8 43.3 – 30 40 – 30 45 – 10 8 – 10 8 – 6HK16501506 60.0 28.3 43.3 – 31.1 50.0 – 30 45 – 35 50 – 10 8–88–

AHV60D

6HK16501806 72.0 45.6 39.0 – 51.1 45.0 – 50 40 – 60 45 –88–68– 6HK16502006 80.0 49.9 43.3 – 56.1 50.0 – 50 45 – 60 50 –88–68– 6HK16502506 100.0 49.9 43.3 21.7 56.1 50.0 25.0 50 45 25 60 50 25 8 8 10 6 8 10

1. MOP = Maximum Overcurrent Protection device; must be HACR type circuit breaker or time delay fuse.

2. Stated sizes are for 75°C, copper wire only. If wire other than non-plated, 75°C ambient, copper wire is used, consult applicable tables of the NEC and local codes.

3. 1st Circuit includes the blower motor amps.

2nd 3rd

ELECTRICAL DATA FOR MULTI-SOURCE POWER SUPPLY: 208/230-3-60

2nd

MOP

1st

Min. Wire Size (AWG)

2nd

1st

2nd

Min. Circuit Ampacity

Air Handler

Models

AHV36C

AHV42D

Heater

Models

Total Heater

Amps

@ 240V

6HK16502025 46.2 29.5 25.0 32.9 28.9 30 25 35 30 10 10 8 10

208V 230V 208V 230V 208V 230V

Circuit Circuit Circuit

1st

2nd

1st

2nd

1st

AHV48D 6HK16502025 46.2 31.7 25.0 35.0 28.9 35 25 35 30 8 10 8 10 AHV60D

1. MOP = Maximum Overcurrent Protection device; must be HACR type circuit breaker or time delay fuse.

2. Stated sizes are for 75°C, copper wire only. If wire other than non-plated, 75°C ambient, copper wire is used, consult applicable tables of the NEC and local codes.

3. 1st Circuit includes the fan motor.

6HK16502025 46.2 31.7 25.0 35.0 28.9 35 25 35 30 8 10 8 10 6HK16502525 57.7 37.9 31.3 42.2 36.1 40 35 45 40 8888

TYPICAL APPLICATIONS ACCESSORIES

Refer to Price Manual for specific model numbers where not shown.

TXV Kits - TXV kits are available for “Flex-coil” applications and con-

verting R-22 to R-410A or as a service replacement. All kits are bolt-on and require no brazing to install.

Electric Heaters - 6HK models shown under electrical data include

sequential operation and temperature dual limit switches for safe, efficient operation. Circuit breakers are provided where shown.

LIMITATIONS

These units must be wired and installed in accordance with all national and local safety codes.

Voltage limits are as follows:

Air Handler Voltage

Normal Operating Voltage

Range

208/230-1-60 187-253

1. Rated in accordance with ARI Standard 110, utilization range “A”.

Airflow must be within the minimum and maximum limits approved for electric heat, evaporator coils and outdoor units.

1st

2nd

8 Johnson Controls Unitary Products

Page 9

TYPICAL THERMOSTAT CONNECTION

Air Handler Control Wiring

Typical A/C - Cooling only Applications

THERMOSTAT

AIR HANDLER

BOARD

1 - STAGE

AIR CONDITIONING

Y/Y2

HUM

COM

HUMIDISTAT

THERMOSTAT

AIR HANDLER

BOARD

1 - STAGE

AIR CONDITIONING

Y/Y2

HUM

COM

HUMIDISTAT

Air Handler Control Wiring

Typical A/C with Electric Heat Applications

CONTROL WIRING - Air Handler & UPG HP Systems Two Stage

H/P with York Guard VI Board & Copeland “Ultra Tech”

Conventional Application - Not Hot Heat Pump

THERMOSTAT

AIR HANDLER

BOARD

2 - STAGE SCROLL

HEAT PUMP

RR R

X / L X / L

Y/Y2

Y2 OUT

W2 OUT

W1 OUT

HUM

COM

HUMIDISTAT

A+

B-

A+

B-

A+

B-

Y/Y2

HUM

COM

Touch Screen

Communicating

Control

Air Handler

Communicating

Control

Air Conditioner/Heat Pump

Communicating Control

Cooling Models with and without Electric Heat Wiring

* Optional dehumidification humidistat switch contacts open on humidity rise.

NOTES:

1. “Y/Y2” Thermostat wire must be connected for full CFM and applications requiring 60 second blower off delay for SEER enhancement.

2. Remove humidistat jumper on air handler control board.

3. For heat pump applications - set AC/HP jumper on air handler control board to the HP position.

1169507-YTG-A-1114

TYPICAL THERMOSTAT WIRING F OR 2-STAGE HEAT PUMP WITH ECM BLOWER MOTOR

* Optional dehumidification humidistat switch contacts open on humidity rise. NOTES:

1. “Y/Y2” Thermostat wire must be connected for full CFM and applications

2. Set humidistat jumper to “YES” if using humidistat or communicating control.

3. For heat pump applications - set AC/HP jumper on air handler control board

Johnson Controls Unitary Products 9

requiring 60 second blower off delay for SEER enhancement.

to the HP position.

AIR HANDLER WITH COMMUNICATING AC OR HP

FIGURE 1: Air Handler with Communicating AC or HP

Page 10

1169507-YTG-A-1114

AIR FLOW DA TA (CFM)

High/Low Speed Cooling and Heat Pump CFM

Cool Tap

ADJ Tap

AHV18 AHV24 AHV30 AHV36

High Low High Low High Low High Low

A B 805 523 1035 673 1150 748 1380 897 B B 690 449 920 598 1035 673 1208 794 A A 700 455 900 585 1000 650 1200 780 B A 600 390 800 520 900 585 1050 690 A C 630 410 810 527 900 585 1080 702 C B 575 374 776 506 920 598 1035 673 B C 540 351 720 468 810 527 945 621 D B 460 299 633 414 805 523 863 564 C A 500 325 675 440 800 520 900 585 D A 400 260 550 360 700 455 750 490 C C 450 293 608 396 720 468 810 527 D C 360 234 495 324 630 410 675 441

Cool Tap

ADJ Tap

AHV42 AHV48 AHV60

High Low High Low High Low

A B 1610 1047 1840 1196 2070 1346 B B 1495 972 1668 1093 1811 1179 A A 1400 910 1600 1040 1800 1170 B A 1300 845 1450 950 1575 1025 A C 1260 819 1440 936 1620 1053 C B 1380 897 1495 972 1668 1081 B C 1170 761 1305 855 1418 923 D B 1265 822 1323 863 1570 1024 C A 1200 780 1300 845 1450 940 D A 1100 715 1150 750 1365 890 C C 1080 702 1170 761 1305 846 D C 990 644 1035 675 1229 801

High/Low Speed Heat CFM

Heat Tap

ADJ Tap

AHV18 AHV24 AHV30 AHV36

High Low High Low High Low High Low

A Any 850 650 1100 740 1100 740 1360 900 B Any 700 600 960 650 960 650 1150 770 C Any 550 550 830 600 830 600 1000 630 D Any 400 400 580 550 580 550 720 550

Heat Tap

ADJ Tap

AHV42 AHV48 AHV60

High Low High Low High Low

A Any 1550 950 1775 1000 2000 1150 B Any 1350 800 1600 850 1840 1050 C Any 1150 670 1360 750 1570 950 D Any 900 550 1170 600 1370 830

1. All CFMs are shown at 0.3" w.c.external static pressu re. These units have variable-speed ECM motors that automatically ad just to provide constant CFM from

0.0" to 0.4" wc. external static pressure. From 0.4" to 0.8" ex ternal st atic pressure, CFM is reduced by 2% per 0. 1" static pre ssure. Operation o f these units on du ct systems with external static pressure greater than 0.8" is not recommended.

At some settings, airflow may be lower than what is required to operate an airflow switch on certain models of electr onic air cleaners. Consult the instructions for

the electronic air cleaner for further details.

Data is for 208V or 230V.

2. The ADJ "D" tap should not be used.

10 Johnson Controls Unitary Products

Page 11

WIRING DIAGRAMS

HE1

HE2

HE3

SEQ2

SEQ1

RED

EQUIPMENT GROUND

YEL

BLU

BLK

RED

YEL

BRN WHT

BLU

PRP

BLU

HE1

HE2

HE3

SEQ2

SEQ1

RED

EQUIPMENT GROUND

YEL

RED

YEL

BLK

RED

BLK

BRN WHT

BLU

PRP

BLU

RED

BLU

HE2

RLY 2

RLY 1

RED

EQUIPMENT GROUND

YEL

BLK

BLU

YEL

WHT

BLU

PRP

BLU BLU

BLU

HE1

HE2

HE3

SEQ3

SEQ1

RED

EQUIPMENT GROUND

BLU

BLK

RED

BRN WHT

BLU

PRP

BLU

SEQ2

BLU

HE5

HE4

BRN

RED

BLK

BLU

YEL

RED

HE4

BLU

BLK

BLU

HE1

BLU

WHT

RLY

RED

EQUIPMENT GROUND

YEL

BLK

WHT

BLU

PRP

BLU

HE2

WHEN INSTALLING HEATER KIT, BE SURE THE BLOWER SPEED IS SET TO THE SPEED SPECIFIED FOR THE AIR HANDLER/HEATER KIT COMBINATION ON THIS UNIT'S INSTALLATION INSTRUCTIONS.

HEATER KITS: 6HK*6500206 6HK*6500506

HEATER KITS: 6HK*6500806 6HK*6501006

HEATER KITS: 6HK16501306 6HK16501506

HEATER KITS: 6HK16501806 6HK16502006

HEATER KIT: 6HK16502506

24V

240V

COM

208V

XFORMER

HE1

HE2

HE3

HE4

HE5

SEQ or RLY

SEQ

SEQ or RLY

RED

GRN

BLU

WHT

BRN

USE COPPER CONDUCTORS ONLY. IF ALUMINUM CONDUCTORS ARE PRESENT, ALL APPLICABLE LOCAL AND NATIONAL CODES MUST BE FOLLOWED.

SEE INSTALLATION INSTRUCTIONS FOR PROPER LOW VOLTAGE FIELD WIRING CONNECTIONS.

LEGEND LS - LIMIT SWITCH SEQ - SEQUNECER HE - HEATING ELEMENT FL - FUSIBLE LINK H - SEQUNECER HEATER RLY - RELAY TSTAT - WALL THERMOSTAT

COM

818695-UWD-A-1111

208-240 VOLT

13 KW AND ABOVE

10 KW AND BELOW

ECM BLOWER MOTOR

C L G N

12345

YEL

EQUIPMENT GROUND

BLK

RED

{

208-240 VAC 60HZ

1 PHASE SUPPLY

24V

240V

ECM BLOWER MOTOR

COM

208V

XFORMER

BLK

RED

BLU

BRN

WHT

GRN

C L G N

12345

RED

BLK

GRY

ECM AIR HANDLER WITH NO HEAT KIT WIRING DIAGRAM

GRN

9 8 7 6 5 4 3 2 1

8 7 6 5 4 3 2 1

BLU

PRP

ORG

WHT

BRN

YEL/BLK

YEL

GRN

RED

BLU/BLK

BLU

ORG

BLK

RED

BLU/WHT

BRN

WHT

CONTROL BOARD

TSTAT

1169507-YTG-A-1114

WIRING DIAGRAM - SINGLE PHASE HEAT KITS

Johnson Controls Unitary Products 11

Page 12

HEATER KITS: 6HK06501025 6HK06501525

HEATER KITS: 6HK06501825

HEATER KITS: 6HK16502025 6HK16502525

COMPONENT CODES GND – EQUIPMENT GROUND FL – FUSIBLE LINK HE – HEATING ELEMENT LS – LIMIT SWITCH REL – RELAY

FIELD POWER WIRING

(208/230V)

FACTORY WIRING

(208/230V)

FACTORY WIRING

LOW VOLTAGE

GND

REL1

REL2

REL3

REL4

REL5

REL6

HE1

HE6

HE5

HE4HE3

HE2 FL

REL1

REL2

REL3

HE1HE3

HE2FL

FL FL

REL1

REL2

REL3

REL4

REL5

REL6

HE1

HE6

HE5

HE4

HE3

HE2 FL

WIRING DIAGRAM - 3 PHASE HEAT KITS

York International Corp.

5005 York Drive

Norman, OK 73069