York AM012M1021, AM018M1021, AM024M1021, AM030M1021 Technical Manual

A

A

V

A

036-21573-001 Rev. A (0304)

®

TECHNICAL GUIDE

SPLIT-SYSTEM

IR CONDITIONERS

10 SEER

M012M102 THRU AM030M1021

(1 THRU 2.5 NOMINAL TONS, 1 PH)

O

T

A

R

D

I

E

I

A

F

S

I

T

R

C

E

O

C

M

A

P

I

R

R

-

L

C

E

O

Y

N

R

Y

I

D

R

I

U

A

T

T

I

C

N

U

A

F

U
N

A

M

C
E

R
T

I

A

R

This product was manufactured
in a plant whose quality system
is certified/registered as being
in conformity with ISO 9001.

I

Certification applies only

when the complete

system is listed

Due to continuous product improvement, sp e ci f ic a tio ns
are subject to change without notice.

isit us on the web at www.york.com for the most

up-to-date technical information.

dditional rating information can be foun d at

www.ariprimenet.org.

R

E

Q

U

I

P

M

F

I

C

A

T

I

O

N

S

T

A

N

with ARI.

N

T

G

I

O

N
I

W

N

I

G

T

H

T

F

N

E

O

S

N

O

I

T

0

C

E

S

1

2

D

R

A

D

LISTED

DESCRIPTION

The 10 SEER Series condensing unit is the outdoor part of a
versatile system of air conditioning. It is designed to be cus­tom-matched with one of UPG’s complete line of evaporator
sections, each designed to serve a specific function. Match­ing air handlers are available for upflow, downflow, or hori­zontal applications to provide a complete system. Electric
heaters are available if required. Add-on coils are available
for use with upflow, downflow, or horizontal furnaces and air
handlers.

WARRANTY

5-year limited parts warranty.

5-year limited compressor warranty.

FEATURES

• QUALITY CONDENSER COILS - The coil is constructed
of enhanced copper tube and aluminum fins.

• COIL PROTECTION - Coils are protected from damage by
a polymer mesh applied between the coil face, and a PVC
coated steel coil guard.

• PROTECTED COMPRESSOR - Recip compressors are
internally protected against high pressure and tempera­ture. This is accomplished by the simultaneous operation
of high pressure relief valve and a temperature sensor
which protects the compressor if undesirable operating
conditions occur. A liquid line filter-drier further protects the
compressor.

• DURABLE FINISH - The cabinet is made of pre-painted
steel. The pre-treated flat galvanized steel provides a bet­ter paint-to-steel bond, which resists corrosion and rust
creep. Special primer formulas and matted desert sand fin­ish insure less fading when exposed to sunlight.

• LOWER INSTALLED COST - Installation time and costs
are reduced by easy power and control wiring connec­tions. The unit contains enough refrigerant for matching
indoor coils and 15 feet of interconnecting piping. The
small base dimension means less space is required on the
ground or roof.

• TOP DISCHARGE - The warm air from the top mounted
fan is blown up away from the structure and any landscap­ing. This allows compact location on multi-unit applica­tions.

• LOW OPERATING SOUND LEVEL - The upward air flow
carries the normal operating noise up away from the livi ng
area. The rigid top panel effectively isolates any motor
sound. Isolator mounted compressor and the rippled fins
of the condenser coil muffle the normal fan motor and
compressor operating sounds.

• LOW MAINTENANCE - Long life permanently lubricated
motor-bearings need no annual servicing.

• EASY SERVICE ACCESS - Fully exposed refrigerant con­nections and a single panel covering the electrical controls
make for easy servicing of the unit.

• SECURED SERVICE VALVES - Secured re-usable ser-
vice valves are provided on both the liquid and vapor
sweat connections for ease of evacuating and charging.

• U.L. AND C.U.L. LISTED - Approved for outdoor applica­tion.

Certified in accordance with the Unitary Small Equipment cer­tification program, which is based on ARI Standard 210/240.

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

036-21573-001 Rev. A (0304)

Physical and Electrical Data

MODEL

Unit Supply Voltage 208-230V, 1φ, 60Hz
Normal Voltage Range

Minimum Circuit Ampacity 8.8 10.1 15.3 19.3
Max. Overcurrent Device Amps

Compressor Type Rotary Recip Recip Recip
Compressor Amps
Crankcase Heater No No No No

Fan Motor Amps Rated Load 0.5 0.5 0.9 0.9
Fan Diameter Inches 17-1/2 17-1/2 17-1/2 17-1/2

Fan Motor

Coil

Liquid Line OD 3/8 3/8 3/8 3/8
Vapor Line OD 5/8 5/8 5/8 3/4

Unit Charge (Lbs. - Oz.)
Charge Per Foot, Oz. 0.66 0.66 0.66 0.68
Operating Weight Lbs. 94 114 119 122

1. Rated in accordance with ARI Standard 110, utilization range “A”.

2. Dual element fuses or HACR circuit breaker.

3. The Unit Charge is correct for the outdoor unit, matched indoor coil, and 15 feet of refrigerant tubing. For tubing lengths other
than 15 feet, add or subtract the amount of refrigerant, using the difference in length multiplied by the per foot value.

1

2

Rated Load 6.7 7.7 11.5 14.7
Locked Rotor 33486073

Rated HP 1/12 1/12 1/8 1/8
Nominal RPM 1,100 1,100 1,075 1,075

Nominal CFM 1,600 1,550 1,750 1,750
Face Area Sq. Ft. 7.22 7.22 7.22 7.94
Rows Deep 1111
Fins / Inch 14 16 20 20

3

AM012M1021 AM018M1021 AM024M1021 AM030M1021

187 to 252

15 15 20 25

3 - 2 3 - 1 3 - 4 3 - 9

All dimensions are in inches. They are subject to change without
notice. Certified dimensions will be provided upon request.

C

A

Unit

Model

012 22 21-3/4 21-3/4 3/8” 5/8”
018 22 21-3/4 21-3/4 3/8” 5/8”
024 22 21-3/4 21-3/4 3/8” 5/8”
030 24 21-3/4 21-3/4 3/8” 3/4”

1. Including Fan Guard

Dimensions

1

A

(Inches)

B C Liquid Vapor

Refrigerant
Connection

Line Size

B

2 Unitary Products Group

036-21573-001 Rev. A (0304)

Additional R-22 Charge / Orifice Size for Various Matched Systems

ADDITIONAL R-22 CHARGE / ORIFICE SIZE FOR VARIOUS MATCHED SYSTEMS

Outdoor Unit AM012M1021 AM018M1021 AM024M1021 AM030M1021
Unit Orifice (s)

Factory R-22 Charge, lbs-oz 3 - 2 3 - 1 3 - 4 3 - 9

Indoor Coil

G2FD024(S,H)14/17 61 47 + 8 51 + 7 59 + 2 —
G2FD030(S,H)17 65 — — — 63 + 2
G2FD035(S,H)14 65 — — — 63 + 1
G1HD024 59 47 + 7 53 + 6 59 + 3 —
G1HD036 69 — — — 63 + 7
G1FA/G1UA024S14/17 59 47 + 6 51 + 5 59 + 0 —
G1FA/G1UA030S14 65 — — — 63 + 3
G1FA/G1UA036S14 73 — — 59 + 6 63 + 3
G1FA/G1UA03617/21 73 — — — 63 + 1
G1NA024S17G 51 47 + 0 51 + 0 — —
G1NA030S17H 57 — — 59 + 2 —
G1NA030S17K 63 — — — 63 + 2
G1NA030S21B 57 — — 59 + 2 —
G1NA030S21M 63 — — — 63 + 2
G1NF024SOF 63 — — 59 + 2 63 + 0
F2RP/F2FP018 53 47 + 3 51 + 1 — —
F2RP/F2FP024 61 — 51 + 7 59 + 2 —
F2RP/F2FP030 65 — — — 63 + 2
F2RP/F2FP036 75 — — — 63 + 8
MDD30BSD 57 — — 59 + 2 —
MDD30MSD 63 — — — 63 + 2

FOOTNOTES:

1. These orifices are packed in the customer packet of each outdoor unit.

2. These orifices are factory mounted in the flow control device of each indoor coil.

PROCEDURES:

1. Unit factory charge listed on the unit nameplate includes refrigerant for the condenser, the smallest evaportor, and 15 feet of inter-

2. Verify the orifice size and additional charge required for specific evaportor coil in the system using the above table.

3. Add charge for the amount of interconnecting line tubing greater than 15 feet at the rate specified in the table above.

4. Permanently mark the unit nameplate with the total system charge. T o t al System Charge = Base Charge (as shipped) + adder for

5. If the orifice in the evaportor was changed, verify the evaportor nameplate has been marked with the correct orifice size .

1

connecting line tubing.

evaportor + adder for line set.

Coil Orifice

2

47 51 59 63

System Orifice - Additional Charge, Oz

Unitary Products Group 3

036-21573-001 Rev. A (0304)

COOLING CAPACITY - With Air Handler Coils

AIR HANDLER

UNIT MODEL

AM012M1021 N1AHB0806 10 17 G2FD024(S,H)17 450 14.5 10.4 10.00 - 10.00
AM018M1021 N1AHB0806 10 17 G2FD024(S,H)17 650 18.6 13.4 10.00 - 9.50
AM024M1021 N1AHB0806 10 17 G2FD024(S,H)17 850 23.4 16.8 10.00 - 9.15
AM030M1021 N1AHB1206 10,15,18 17 G2FD030(S,H)17 1050 28.2 20.3 10.00 - 9.00

AM012M1021 F2RP018 2,5,8 18 - 500 14.5 10.6 10.00 - 9.70
AM018M1021 F2RP/F2FP018 2,5,8 18 - 650 17.4 12.6 10.00 - 9.35
AM018M1021 F2RP/F2FP024 5,8,10 18 - 650 18.6 13.4 10.00 - 9.50
AM024M1021 F2RP/F2FP024 5,8,10 18 - 850 23.4 16.8 10.00 - 9.15
AM030M1021 F2RP/F2FP030 5,8,10,15 18 - 1050 28.4 20.3 10.00 - 9.05
AM030M1021 F2RP/F2FP036 5,8,10,15,19 21 - 1050 29.0 20.7 10.00 - 9.15

Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ARI Standards 210/240.
Cooling MBH based on 95°F outdoor ambient, 80°F entering air tempera ture, 50% RH, and rated air flow.
EER (Energy Efficiency Ratio) is the total cooling output in BTU’s divided by the total electric power in watt-hours at those conditions.
SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTU’s during a normal annual usage period for cooling divided by the total electric power input in
watt-hours during the same period.

1. G2FD coils available with a factory installed horizontal drain pan. See price p ages for specific model number.

2. Single phase units require single phase 2HK heaters.

3. TXV = Use 1TV700 Series Kit.

4. To meet R=4.2 insulation requirements, substitute F2FP for F2RP

5. F2RP air handlers have B.O.D (Blower on Delay) standard.

- = Not applicable.

MODEL

ELECTRIC

HEAT KW

2

1 PH 10 SEER AC WITH N1AH / G2FD

W

1 PH 10 SEER AC / F2RP

. All ratings remain the same.

COIL

MODEL

1

RATED

CFM

4,5

NET MBH

TOTAL SENS.

COOLING

SEER

W/O TXV

SEER

+ TXV

EER

3

ACCESSORIES*

Refer to Price Manual for specific model numbers.
Hard Start Kit - Provides increased starting torque for areas

with low voltage.
Compressor Blanket - Designed to further reduce the nor-

mal compressor operating sound. Refer to price pages for
specific match-ups.

Off Cycle Timer Delay - Provides a 5-minute off cycle to pre­vent rapid recycling of the compressor.

Room Thermostats - A wide selection of compatible thermo­sets are available to provide optimum performance and fea­tures for any installation.

1 Heat Stage only, manual, mechanical thermostat. Add sub­base for 1H/1C.

1H/1C, manual change-over electronic non-programmable
thermostat.

1H/1C, auto/manual changeover, electronic programmable,
deluxe 7-day, thermostat.

1H/1C, auto/manual changeover, electronic programmable.
* For the most current accessory information, refer to the

price book or consult factory.

SOUND RATINGS*

SOUND

UNIT MODEL

012 72
018 74
024 75
030 76

*Rated in accordance with ARI Standard 270.

RATINGS

DBA

4 Unitary Products Group

COOLING CAPACITY - Upflow, Downflow, & Horizontal Furnaces and Coils

FURNACE

UNIT MODEL

CFM RANGE

(MIN.-MAX.)

AM012M1021

AM018M1021

AM024M1021

AM030M1021

1. Refer to Quick Selection Chart for specific furnace match-up.

2. TXV = Use 1TV700 Series Kit.

250
650

575
725

750
950

925

1175

1

WRATED CFM

COIL

MODEL

NET MBH

TOTAL SENS.

14,17 G1FA024S14,17 450 14.4 10.3 10.00 - 9.95

- G1HD024 450 14.6 10.4 10.00 - 10.00

17 G1NA024S17G 450 14.1 10.0 10.00 - 9.80
14,17 G1UA024S14,17 450 14.4 10.3 10.00 - 9.95
14,17 G2FD024(S,H)14,17 450 14.5 10.4 10.00 - 10.00
14,17 G1FA024S14,17 650 18.3 13.3 10.00 - 9.40

- G1HD024 650 18.5 13.5 10.00 - 9.50

17 G1NA024S17G 650 17.7 12.4 10.00 - 9.50
14,17 G1UA024S14,17 650 18.3 13.3 10.00 - 9.40
14,17 G2FD024(S,H)14,17 650 18.6 13.4 10.00 - 9.50
14,17 G1FA024S14,17 850 23.0 16.6 10.00 - 9.05

14 G1FA036S14 850 23.8 17.2 10.00 - 9.25

- G1HD024 850 23.6 17.0 10.00 - 9.25
17 G1NA030S17H 850 23.6 16.5 10.00 - 9.20
21 G1NA030S21B 850 23.6 16.5 10.00 - 9.20

14,17 G1UA024S14,17 850 23.0 16.6 10.00 - 9.05

14 G1UA036S14 850 23.8 17.2 10.00 - 9.25

14,17 G2FD024(S,H)14,17 850 23.4 16.8 10.00 - 9.15

14 G1FA030S14 1050 28.2 20.2 10.00 - 8.95
14 G1FA036S14 1050 28.2 20.2 10.00 - 8.95

17,21 G1FA036S17,21 1050 28.0 20.0 10.00 - 8.95

- G1HD036 1050 28.4 20.2 10.00 - 9.00
17 G1NA030S17K 1050 28.4 19.9 10.00 - 9.00
21 G1NA030S21M 1050 28.4 19.9 10.00 - 9.00
14 G1UA030S14 1050 28.2 20.2 10.00 - 8.95
14 G1UA036S14 1050 28.2 20.2 10.00 - 8.95

17,21 G1UA036S17,21 1050 28.0 20.0 10.00 - 8.95

17 G2FD030(S,H)17 1050 28.2 20.3 10.00 - 9.00
14 G2FD035(S,H)14 1050 28.0 20.0 10.00 - 8.95

COOLING

SEER

W/O TXV

036-21573-001 Rev. A (0304)

2

SEER + TXV

EER

COOLING PERFORMANCE

AIR TEMP ON CONDENSER

MODEL

SUCT. T/P @

COMPR.

AIR TEMP ON CONDENSER
75°F 95°F 115°F 75°F 95°F 115°F

MODEL

SUCT. T/P @

COMPR.

TEMP. PSIG MBH KW MBH KW MBH KW TEMP. PSIG MBH KW MBH KW MBH KW

AM012M1021

AM018M1021

35 61.5 13.1 1.01 11.6 1.20 10.1 1.40
40 68.5 14.5 1.03 12.8 1.23 11.2 1.44 40 68.5 22.9 2.24 19.3 2.52 16.5 2.74
45 76.0 15.9 1.04 14.1 1.26 12.4 1.47 45 76.0 25.0 2.27 21.6 2.58 18.3 2.83
50 84.0 17.4 1.06 15.5 1.28 13.6 1.51 50 84.0 26.8 2.28 23.9 2.63 20.5 2.92
35 61.5 16.2 1.66 13.1 1.84 11.0 1.96
40 68.5 17.7 1.67 14.9 1.88 12.8 2.04 40 68.5 27.4 2.70 23.1 3.04 19.7 3.30
45 76.0 19.3 169 16.7 1.92 14.2 2.11 45 76.0 29.9 2.74 25.8 3.10 21.9 3.41
50 84.0 20.8 1.70 18.5 1.96 15.9 2.18 50 84.0 32.1 2.75 28.6 3.17 24.5 3.51

AM024M1021

AM030M1021

35 61.5 21.0 2.23 17.0 2.46 14.2 2.63

35 61.5 25.1 2.68 20.3 2.97 17.0 3.17

NOTES:

1. For condensing unit only. Does not include effect of evaporator motor power or heat.

2. Performance based on 15° superheat and 15° sub-cooling at condensing unit.
a. Increase capacity 1% for each 2° increase in sub-cooling.
b. Decrease capacity 1% for each 2° decrease in sub-cooling.

3. Sub-cooling in excess of 20° may result in excessively high condensing temperature with air on condenser above 115°F.
Maximum recommended condensing temperature is 140°F.

Unitary Products Group 5

036-21573-001 Rev. A (0304)

TYPICAL INSTALLATION

6” CLEARANCE

AROUND PERIMETER

NOTE: ALL OUTDOOR WIRING
MUST BE WEATHERPROOF.

TYPICAL FIELD WIRING

MINIMUM 18” SERVICE ACCESS
CLEARANCE ON ONE SIDE

60” OVERHEAD
CLEARANCE

WEATHERPROOF
DISCONNECT
SWITCH

CONTROL
ACCESS PANEL

THERMOSTAT

SEAL OPENING(S) WITH
PERMAGUM OR EQUIVALENT

TO FURNACE OR
AIR HANDLER
TERMINAL BLOCK

NEC CLASS 1 WIRING

NEC CLASS 2 WIRING

TO INDOOR COIL

GND.

LUG

ALL FIELD WIRING TO BE IN ACCORDANCE WITH NATIONAL ELECTRIC CODE (NEC) AND/OR LOCAL CODES

POWER WIRING

208-230, 1 , 60 Hzf

24 VOLT CONTROL WIRING
MINIMUM 18 GA. WIRE
(NEC CLASS 2)

FURNACE OR AIR HANDLER TERMINAL BLOCK

POWER WIRING
CONTROL WIRING
FACTORY WIRING

CYRGW

*

TERMINAL W IS ONLY
REQUIRED ON SYSTEMS
WITH HEAT.

CONTACTOR
TERMINALS

COIL

CONDENSING UNIT

YRGW

ROOM THERMOSTAT

*

ALL OUTDOOR WIRING MUST BE WEATHERPROOF. USE COPPER CONDUCTORS ONLY.

6 Unitary Products Group

COOLING PERFORMANCE DATA

AIR CONDITIONER MODEL NO. AM012M1021
INDOOR COIL MODEL NO. G1NA024S17G

CONDENSER

ENTERING AIR

TEMPERATURE

75

85

95

105

115

125

NOTE: ALL CAPACITIES ARE NET WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.

ID CFM 400 450 500

ID DB (°F) 85 80 70 85 80 70 85 80 70

ID WB (°F) 72 67 57 72 67 57 72 67 57

T.C. 15.4 14.6 13.8 15.4 14.7 14.0 15.5 14.8 14.2
S.C. 9.6 9.6 9.2 10.0 9.9 9.7 10.3 10.3 10.2
K.W 1.21 1.21 1.21 1.23 1.22 1.22 1.25 1.24 1.24

T.C. 15.2 14.2 13.1 15.3 14.4 13.3 15.4 14.6 13.6
S.C. 9.8 9.5 9.0 10.1 10.0 9.5 10.5 10.4 10.1
K.W 1.32 1.31 1.31 1.34 1.33 1.33 1.36 1.35 1.35

T.C. 15.1 13.8 12.4 15.2 14.1 12.7 15.3 14.4 13.0
S.C. 9.9 9.5 8.8 10.3 10.0 9.3 10.7 10.5 9.9
K.W 1.43 1.42 1.42 1.45 1.44 1.44 1.47 1.46 1.46

T.C. 14.2 13.0 11.6 14.3 13.2 11.9 14.5 13.4 12.1
S.C. 9.5 9.0 8.3 10.0 9.6 8.8 10.5 10.1 9.4
K.W 1.56 1.55 1.53 1.58 1.57 1.55 1.60 1.59 1.57

T.C. 13.3 12.1 10.9 13.5 12.2 11.1 13.6 12.4 11.2
S.C. 9.2 8.6 7.7 9.8 9.1 8.3 10.4 9.7 8.9
K.W 1.69 1.67 1.65 1.71 1.70 1.67 1.73 1.72 1.69

T.C. 12.5 11.3 10.2 12.6 11.3 10.3 12.8 11.3 10.4
S.C. 8.8 8.1 7.2 9.5 8.7 7.8 10.2 9.2 8.4
K.W 1.82 1.80 1.76 1.84 1.82 1.78 1.86 1.85 1.81

036-21573-001 Rev. A (0304)

Multipliers for determining the performance with other indoor sections.

NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the
listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.

Air Handler Coil

N1AHB0806 G2FD024(S,H)17 1.03 1.04 1.01
F2RP018 1.03 1.06 1.04

G1FA024S14,17 1.02 1.03 1.01
G1HD024 1.04 1.04 1.01
G1UA024S14,17 1.02 1.03 1.01
G2FD024(S,H)14,17 1.03 1.04 1.01

T.C. S.C. KW

Unitary Products Group 7

036-21573-001 Rev. A (0304)

COOLING PERFORMANCE DATA

AIR CONDITIONER MODEL NO. AM018M1021
INDOOR COIL MODEL NO. G1NA024S17G

CONDENSER

ENTERING AIR

TEMPERATURE

75

85

95

105

115

125

NOTE: ALL CAPACITIES ARE NET WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.

ID CFM 500 650 800
ID DB (°F) 85 80 70 85 80 70 85 80 70
ID WB (°F) 72 67 57 72 67 57 72 67 57

T.C. 20.6 19.1 17.8 20.7 19.5 18.3 20.9 19.9 18.8
S.C. 11.311.110.812.012.012.112.713.013.4
K.W 1.59 1.58 1.56 1.66 1.64 1.63 1.72 1.71 1.70
T.C. 19.7 18.2 16.5 19.9 18.6 17.1 20.1 19.0 17.7
S.C. 11.3 10.9 10.4 12.3 12.2 11.8 13.4 13.5 13.2
K.W 1.70 1.68 1.66 1.77 1.75 1.73 1.84 1.82 1.80
T.C. 18.9 17.3 15.2 19.1 17.7 15.9 19.4 18.0 16.5
S.C. 11.3 10.8 9.9 12.6 12.4 11.5 14.0 13.9 13.0
K.W 1.81 1.79 1.76 1.88 1.86 1.83 1.95 1.92 1.90
T.C. 17.4 15.5 13.5 17.7 16.0 14.1 18.1 16.6 14.7
S.C. 10.7 10.0 9.2 12.4 11.7 10.8 14.0 13.4 12.3
K.W 1.92 1.88 1.84 1.99 1.95 1.91 2.06 2.02 1.98
T.C. 15.9 13.7 11.8 16.4 14.4 12.4 16.9 15.1 12.9
S.C. 10.2 9.2 8.5 12.1 11.1 10.1 14.0 12.9 11.6
K.W 2.02 1.96 1.92 2.09 2.04 1.99 2.17 2.12 2.06
T.C. 14.4 11.9 10.1 15.0 12.8 10.6 15.7 13.7 11.1
S.C. 9.7 8.4 7.8 11.8 10.4 9.4 14.0 12.4 10.9
K.W 2.12 2.05 1.99 2.20 2.13 2.07 2.28 2.22 2.15

Multipliers for determining the performance with other indoor sections.

NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the
listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.

Air Handler Coil

N1AHB0806 G2FD024(S,H)17 1.05 1.08 1.05
F2RP/F2FP018 0.98 1.02 1.00
F2RP/F2FP024 1.05 1.08 1.05

G1FA024S14,17 1.03 1.07 1.04
G1HD024 1.05 1.09 1.05
G1NA024S17G 1.00 1.00 1.00
G1UA024S14,17 1.03 1.07 1.04
G2FD024(S,H)14,17 1.05 1.08 1.05

T.C. S.C. KW

8 Unitary Products Group

COOLING PERFORMANCE DATA

AIR CONDITIONER MODEL NO. AM024M1021
INDOOR COIL MODEL NO. G1NA030S17H

CONDENSER

ENTERING AIR

TEMPERATURE

75

85

95

105

115

125

NOTE: ALL CAPACITIES ARE NET WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.

ID CFM 650 850 1050

ID DB (°F) 85 80 70 85 80 70 85 80 70

ID WB (°F) 72 67 57 72 67 57 72 67 57

T.C. 28.0 26.3 23.9 28.3 26.6 24.7 28.5 27.0 25.5
S.C. 15.5 15.3 14.6 16.9 16.9 16 .5 18.3 18.4 18.5
K.W 2.25 2.21 2.17 2.34 2.30 2.26 2.42 2.39 2.35

T.C. 26.6 24.5 22.5 26.9 25.1 23.1 27.2 25.7 23.7
S.C. 15.4 14.8 13.9 17.0 16.7 15 .9 18.7 18.5 17.8
K.W 2.39 2.33 2.28 2.48 2.43 2.38 2.57 2.53 2.47

T.C. 25.1 22.8 21.0 25.5 23.6 21.5 25.9 24.4 21.9
S.C. 15.2 14.4 13.1 17.1 16.5 15 .2 19.0 18.6 17.2
K.W 2.53 2.46 2.39 2.63 2.57 2.50 2.72 2.68 2.60

T.C. 23.1 20.7 18.5 23.5 21.5 19.1 24.0 22.2 19.7
S.C. 14.4 13.6 12.4 16.5 15.7 14 .4 18.6 17.8 16.3
K.W 2.73 2.64 2.57 2.84 2.75 2.67 2.94 2.85 2.77

T.C. 21.0 18.6 16.1 21.5 19.3 16.8 22.0 19.9 17.5
S.C. 13.7 12.8 11.7 16.0 14.9 13.5 18.3 16.9 15.4
K.W 2.93 2.81 2.75 3.04 2.92 2.84 3.16 3.03 2.94

T.C. 19.0 16.5 13.6 19.5 17.1 14.5 20.1 17.7 15.3
S.C. 13.0 12.1 11.0 15.5 14.1 12.7 18.0 16.1 14.4
K.W 3.122.992.923.253.103.023.383.213.11

036-21573-001 Rev. A (0304)

Multipliers for determining the performance with other indoor sections.

NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the
listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.

Air Handler Coil

N1AHB0806 G2FD024(S,H)17 0.99 1.02 1.00
F2RP/F2FP024 0.99 1.02 1.00
F2RP/F2FP024 0.79 0.00 0.76

G1FA024S14,17 0.97 1.01 0.99
G1FA036S14 1.01 1.04 1.00
G1HD024 1.00 1.03 0.99
G1NA030S17H 1.00 1.00 1.00
G1NA030S21B 1.00 1.00 1.00
G1UA024S14,17 0.97 1.01 0.99
G1UA036S14 1.01 1.04 1.00
G2FD024(S,H)14,17 0.99 1.02 1.00

T.C. S.C. KW

Unitary Products Group 9

036-21573-001 Rev. A (0304)

COOLING PERFORMANCE DATA

AIR CONDITIONER MODEL NO. AM030M1021
INDOOR COIL MODEL NO. G1NA030S17K

CONDENSER

ENTERING AIR

TEMPERATURE

75

85

95

105

115

125

NOTE: ALL CAPACITIES ARE NET WITH INDOOR FAN HEAT ALREADY DEDUCTED AT 1250 BTUH/1000 CFM.

ID CFM 850 1050 1250
ID DB (°F) 85 80 70 85 80 70 85 80 70
ID WB (°F) 72 67 57 72 67 57 72 67 57

T.C. 32.8 31.3 29.0 33.2 31.8 29.9 33.7 32.3 30.7
S.C. 19.6 19.4 19.2 20.4 20.5 20 .5 21.3 21.7 21.9
K.W 2.75 2.72 2.68 2.85 2.81 2.78 2.94 2.90 2.87
T.C. 31.3 29.5 27.1 31.9 30.1 27.9 32.5 30.6 28.7
S.C. 19.2 19.0 18.6 20.4 20.2 20 .0 21.6 21.5 21.3
K.W 2.95 2.89 2.83 3.05 2.99 2.93 3.15 3.08 3.03
T.C. 29.9 27.7 25.3 30.6 28.4 26.0 31.2 29.0 26.7
S.C. 18.9 18.5 18.0 20.4 19.9 19 .4 21.9 21.3 20.7
K.W 3.14 3.06 2.98 3.24 3.16 3.09 3.35 3.27 3.20
T.C. 27.9 25.6 22.9 28.6 26.2 23.6 29.3 26.9 24.4
S.C. 18.1 17.6 16.9 19.7 19.0 18 .4 21.3 20.5 19.8
K.W 3.32 3.22 3.12 3.43 3.33 3.23 3.54 3.44 3.34
T.C. 25.9 23.4 20.5 26.6 24.1 21.3 27.4 24.9 22.1
S.C. 17.4 16.7 15.7 19.0 18.2 17 .3 20.6 19.7 19.0
K.W 3.50 3.37 3.27 3.61 3.49 3.38 3.72 3.60 3.49
T.C. 23.8 21.3 18.1 24.6 22.0 19.0 25.5 22.8 19.8
S.C. 16.7 15.7 14.6 18.3 17.3 16 .3 20.0 18.9 18.1
K.W 3.67 3.53 3.42 3.79 3.65 3.53 3.91 3.77 3.64

Multipliers for determining the performance with other indoor sections.

NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the
listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature.

Air Handler Coil

N1AHB1206 G2FD030(S,H)17 0.99 1.02 0.99
F2RP/F2FP030 1.00 1.02 0.99
F2RP/F2FP036 1.02 1.04 1.00

G1FA030S14 0.99 1.02 1.00
G1FA036S14 0.99 1.02 1.00
G1FA036S17,21 0.99 1.01 0.99
G1HD036 1.00 1.02 1.00
G1NA030S21M 1.00 1.00 1.00
G1UA030S14 0.99 1.02 1.00
G1UA036S14 0.99 1.02 1.00
G1UA036S17,21 0.99 1.01 0.99
G2FD030(S,H)17 0.99 1.02 0.99
G2FD035(S,H)14 0.99 1.01 0.99

T.C. S.C. KW

10 Unitary Products Group

MATCHING INDOOR COMPONENTS

ADD-ON COILS - FOR FURNACE APPLICATIONS

036-21573-001 Rev. A (0304)

G1UA
1/2 CASED
UPFLOW

G1FA
FULL CASED
UPFLOW

* Available with factory installed horizontal drain pan.

G1HD
HORIZONTAL DUCT

AIR HANDLERS - FOR NON-FURNACE APPLICATIONS

N-AH OR N-VS
MODULAR BLOWER
(UPFLOW, HORIZONTAL
AND DOWNFLOW)

G1NA
UNCASED
UPFLOW

G2FD*
MULTI-POSITION
(UPFLOW, HORIZONTAL
AND DOWNFLOW)

Unitary Products Group 11

G+FD
COIL

F+RC / F+FC OR
F+RC / F+FP
FAN COIL UNITS
(UPFLOW, HORIZONTAL)

NOTES

Subject to change without notice. Printed in U.S.A. 036-21573-001 Rev. A (0304)
Copyright © by York International Corp. 2004. All rights reserved. Supersedes: Nothing

Unitary 5005 Norman
Product York OK

Group Drive 73069