D3D Security Pvt ltd
Copyright Notice
@ 2017 D3D. All right reserved. All text instructions on product
information and services are protected by copyright or other
intellectual property, any use of the text instructions without
D3D’s authorization is illegal.
Here D3D stated, without the license of D3D, everyone is
prohibited copying the instruction in any way by any means, for
transcription electronic, mechanical, optical and other
commercial purposes.
Welcome
Thank you for buying D3D products, if you have any suggestion
or question, please contact us:
Email: support@d3dsecurity.com (India, USA, Australia & Canada)
: support@d3dsecurity.co.uk (UK / Europe)
I. Download Mobile App
Search and install Mobile App’ Yoosee’ from APP Store or Google play store
1.1_ Register & log in
For new user, Open mobile app and click on ‘Register’ button
Note: Registration with email id is recommended.
Image 1 Image 2 Image 3 Image 4
2. Configure camera with mobile app
Note: Before starting the mobile app configuration, it is advised to reset the camera using ‘reset’
button. To reset keep press the ‘Reset’ button for 30 seconds. This will remove any pre-existing
configuration settings from camera.
Camera can be configured with mobile application using the wireless (Wi-Fi) or wired method.
Wireless configuration is recommended for easy installation.
‘Smartlink’ and ‘AP connection’ are two methods for Wi-Fi configuration. Smart link Wi-Fi
configuration is recommended. Please follow steps
2.1_Smart link Wi-Fi Connection：
Open mobile application and follow below steps. Please note that camera’s default password is
mentioned on the sticker of camera.
Step 1 Step 2 Step 3 Step 4
Step 5 Step 6 Step 7 Step 8 Step 9
Note- During step 5, for some models, there will be no Beep sound from camera. Please continue
with step 6 and so on. For step 8, default password is mentioned on the sticker of camera.
Loading...