Yong Lin Technology YLFD01 User Manual

Baby beep Anti-lost Device ManualYL-FD01)

Features:
This product consists of a receiver and a transmitter. When the transmitter and receiver are
separated by more than 8-10 meters ( the open space), the receiver vibrates and rings the alarm.
If the item is found safe, press the Pause button on the receiver to stop the alarm. The receiver
and transmitter are on standby mode.
Application:
Pets tracker
Security for your wallet/suitcase/ anti-theft
Valuables Belongings reminder
Instructions:
1. Please charge the device before you start using it. When the green light is on, the receiver
and transmitter are fully charged
1. Code learning: Switch ON” the receiver and heard a “DI” short tone, then coming up
DI……DI……” long beeps which means waiting for code learning. Please turn ON
the transmitter, when the signal light flashes, it began sending the signals. After a continuous short beeping sound like “ DIDI” from the receiver, successfully coding
learning. After stop beeping, the signal light in slow flashing, now the receiver and
transmitter on its own work.
Note: When the transmitter is OFF, if you turn on the receiver with DIDIshort beeps like
code learning success. Please check around if there is any transmitter nearby and re-learning the
code. If the transmitter is ON, "DI ... ... DI ... ..." long beeps from the receiver waiting for the code
learning, which means transmitter signal is not found, please check the antenna is straight and
battery is not low.
1. After the coding, the receiver is with the protected object, the transmitter with protector its
own. When the transmitter and receiver are separated more than 8-10 meters, the receiver
vibrates and alarms.
1. When on alarm, If the item is safe, press the Pause button on the receiver to stop the alarm.
The receiver and transmitter are getting close in its range(8-10 meters), there is a DI
short beep confirmed tone, both of them are on alert again. If out its range (8-10 meters) it
vibrates and alarms again.

Cautions

1. The Wireless signal strength will be subject to obstacles, tram body structure, radio waves
and other factors, which will affect the product's wireless distance difference.
2. Please stop using it on a flying plane
3. when charging the device please switch the power off.
4. This product lunches a 1MW wave generally, will not cause any harm to human body. Please
note that do not confuse the signal of alarm and vibration and not to miss.
5. To ensure the protected object stay in the range, the transmitter must be with the protected
object can not separated.
1. This product is widely use with a random contingency, the children must be used under the
supervision of parents. The parents can not neglect the responsibility to take care of the
children of rely on using this device.
2. This product falls from a height, collision with other hard objects, circuit boards soak into
water and other non quality issues, failures are not covered in warranty.
Note : This product is a wireless electronic products, in the open space and a good signal place
would still active over its range; when the signal is weak or obstructed, interferenced, it would
shorten its range. When the battery is low, it would shorten its range too. Please charge the
product in time.
Battery:
Check the device and battery regularly
When the red light on, please charge the device in time
When the receiver and transmitter is under its range, please check the battery if shorten
The alarm sound are weak, please check the battery if shorten
Always over-charge and dis-charge will impact the battery life.
Specifications:
Frequency: 433.93MHz
Transmitter: Dimensions (mm): 35.9 * 36.5 * 14.6
Battery: 200MAH polymer battery * 1
Standby time: 2-3 days
Receiver: Dimensions (mm): 70 * 30 * 16
Battery: 500MAH polymer battery * 1
Standby time: 2-3 days
Lost search status: 1-2 days
Packaging (mm): 130 * 110 * 30MM
Loading...
+ 1 hidden pages