Yoho Smart Band User Manual

Smart Band

User Guide

Wearing Method

Best to wear the band after the styloid of ulna;

Please fit the adjusting holes according to your wrist size, and

then do up the wristband buckle;

The sensor should cling to skin to avoid movement.

Charging the band

Please ensure the band has enough battery at your first time

using it. Please charge the band first if it can not be powered on,

and then the band will automatically start working.

Charging method:

Unplug the band body from both ends of the strap. Insert

the USB plug of the band correctly into the USB port of

the computer or the phone adapter.

!!!!!!!!!!!!!!!!!!!!!!!!

Power on/off

① In shutdown state, please long touch the function key over

4 seconds to start the device with vibration;

② In power on state, long touch the function key for more

than 4 seconds to enter the shutdown interface, and short

touch to select OFF, system will be powered off if no

operation in 5 seconds.

Band operation

① In power on state, short touch the function key to light

up the screen to default page with date and time information;

② ! In the default page, short touch the function key can

switch band to different pages. The screen will be turned off

if no operation in 5 seconds;

③ ! When switching to heart rate and blood pressure

interface, the band will automatically start the measurement.

The result will be displayed in 40s, and then the screen will

be turned off automatically.

!

Install the band APP on the phone

To download and install "Yoho Band", pls scan the QR code

below, or search in APP Store.

!!!!!!!

!

System Requirements: Android 5.0 and above; iOS9.0 and

above; Bluetooth 4.0 support.

Bundle the band to APP

For the first time using the band, please connect it to the APP to

calibrate the time and date, otherwise the pedometer and

sleeping monitor will not be accurate. The band will

automatically be synchronized when successfully connected.

Open the app and click

the settings icon

My device

Pull down to scan

device

Click on the device to

bundle the band to APP