YMGI YAP1F User Manual

Your Modern Green Idea

M

I

N

I

S

P

L

I

T

S

•

V

R

F

G

N

I

T

H

G

I

L

D

E

L

•

•

R

A

P

L

T

A

O

S

C

•

Features & Functions

Remote Control

601 Arrow Ln, O’Fallon, MO 63366 • [e-mail] • ymgigroup.com • 866-833-3138

VRF Series YAP1F

Remote Control

USERS GUIDE

YMGI Group

Your Modern Green Idea

M

I

N

I

S

P

L

I

T

S

•

V

R

G

N

I

T

H

G

I

L

D

E

L

•

F

R

•

A

P

L

T

A

O

S

C

•

Button Name Function

ON/OFF Turn on or turn off the unit
TURBO Set turbo function
MODE Set operation mode

Set up & down swing status

I FEEL Set I FEEL function
TEMP Switch temperature displaying type on the unit’s display

Set health function and air function

LIGHT Set light function
X-FAN Set X-FAN function
SLEEP Set sleep function
CLOCK Set clock of the system
TOFF Set timer off function
TON Set timer on function

Set left&right swing status

FAN Set fan speed

Set temperature and time

2

YMGI Group • 601 Arrow Ln, O’Fallon, MO 63366 • [e-mail] • ymgigroup.com • 866-833-3138

YAP1F REMOTE CONTROL FUNCTIONS

Preparation before operation

Your Modern Green Idea

M

I

N

I

S

P

L

I

T

S

•

V

R

When using the remote control for the first time or after replacing the batteries, make
sure to set the system time using the following steps:

1. Press the CLOCK button, until the clock icon is blinking.

2. Press the or button, to increase or decrease clock time.

3. Press the CLOCK button again to confirm the set time and return to display.

Introduction to Operation Functions

1. Selecting Operation Mode

With the unit turned on, press the MODE button to select Operation Mode. The modes will cycle
in the following sequence:

2. Setting Temperature
With the unit turned on, press the button to increase the temperature setting and press the
button to decrease setting temperature. The available temperature range is 60.8°F to 86°F
(16°C to 30°C).

Note:
Under auto mode, manual adjustment of temperature is not available.

G

N

I

T

H

G

I

L

D

E

L

•

F

R

•

A

P

L

T

A

O

S

C

•

3. Adjusting Fan Speed
In unit on status, press FAN button to adjust fan speed in following sequence:

AUTO

Notes:
When the Operation Mode changes,fan speed is remembered
In Dehumidfy Mode, fan speed is set to low and can not be adjusted.

4. Setting Left & Right Swing Functions

1.Under simple swing status, press the button to adjust left & right swing status;

2.Under fixed-angle swing status, press the button to adjust left&right swing angle.
Swing angles cycle as shown below:

CLOSED

Notes:
Left & Right Swing operates continuously completing a swing every 2 seconds. Swing states will
change according to above-mentioned order, or switch closed state or state.

YMGI Group • 601 Arrow Ln, O’Fallon, MO 63366 • [e-mail] • ymgigroup.com • 866-833-3138

3

Your Modern Green Idea

M

I

N

I

S

P

L

I

T

S

•

V

G

N

I

T

H

G

I

L

D

E

L

R

•

F

R

•

A

P

L

T

A

O

S

C

•

YAP1F REMOTE CONTROL FUNCTIONS

5. Up & Down Swing

1. Under simple swing status, press the button to adjust up&down swing status;

2. Under fixed-angle swing status, press the button to adjust up&down swing angle.
Swing angles cycle as shown below:

CLOSED

Note:
operate continuously left&right swing in 2 seconds, swing states will change according to
above mentioned order, or switch closed state and state.

6. Turbo Function
Under cool or heat mode, press TURBO button to turn on Turbo mode.

When the Turbo icon is displayed the Turbo function is on.
When Turbo icon is not displayed, Turbo function is off.
When turbo function is on, the unit operates at high speed to achieve quick cooling or heating. When
Turbo function is off, the unit operates in setting fan speed.

7. Light Function
The light on the receiver light board will display current operation status. If you would like to turn the light
off, press LIGHT button. Pressing this button again will turn on the light.

8. Ambient Temperature
With the unit turned on, the remote control or wired controller is set to display the Set Temperature. By
pressing the TEMP button you can view indoor or outdoor ambient temperature.

When is displayed, the displayed temperature is the Set Temperature.

When is displayed, the displayed temperature is the Indoor Ambient Temperature.

When is displayed, the displayed temperature is the Outdoor Ambient Temperature.

Note:
Set Temperature is always displayed on the Remote Controller.

9. X-FAN Function
In cool or dry mode, press the X-FAN button to set X-FAN function.

When is displayed, X-FAN function is on.
When not displayed, X-FAN function is off.
When X-FAN function is on, the fan will run for a few minutes after the unit is turned off, so that moisture on
the evaporator will be blown away to avoid mildew.

10. Setting Health Function
When unit is turned on, press button to set Health Function.

When is displayed, Health Function is on.
When not displayed, Health Function is off.
Health function is available when the unit is equipped with anion generator. When health function is on, the
anion generator will start operation, adsorbing the dusts and killing bacteria in the room.

4

YMGI Group • 601 Arrow Ln, O’Fallon, MO 63366 • [e-mail] • ymgigroup.com • 866-833-3138

YAP1F REMOTE CONTROL FUNCTIONS

10. Setting Air Function

Press button until icon is displayed, then air function is turned on.

Your Modern Green Idea

M

I

N

I

S

P

L

I

T

S

•

V

R

F

•

P

T

Press button until icon has disappeared, then air function is turned off.

When the indoor unit is connected with fresh air valve, air function setting can control the connection of
fresh air valve, which can control the fresh air volume and improve the air quality inside the room.

11. Setting Sleep Function
In unit on status, press SLEEP button to turn on or turn off sleep function.

When is displayed, sleep function is on.
When not displayed, sleep function is off.
Notes:

1. Sleep function can not be set in auto and fan mode;

2. When turning off the unit or switching mode, sleep function is cancelled.

12. Setting I FEEL Function
In unit on status, press I FEEL button to turn on or turn off I FEEL function.
When is displayed, I FEEL function is on.
When is not displayed, I FEEL function is off.
When I FEEL function is turned on, the unit will adjust temperature according to the temperature detected
by the remote controller to achieve the best air-conditioning effect. In this case, you should place
the remote controller within the valid receiving range.

G

N

I

T

H

G

I

L

D

E

L

•

R

A

L

A

O

S

C

•

13. Setting Timers
You can set the operation time of unit as you need. You can also set timer on and timer off in combination.
Before setting, check if the time of the system is the same as the current time. If not, please set the time
according to current time.
Setting Timer Off

1. Pressing TOFF button, “OFF” is blinking and time displaying zone displays the timer time of last setting.

2. Press or button to adjust the timer time.

3. Press TOFF button again to confirm setting. OFF is displayed and time displaying zone resumes to
display current time.

4. Press TOFF button again to cancel timer and OFF is not displayed.

Setting Timer On

1. Pressing TON button, “ON” is blinking and time displaying zone displays the timer time of last setting.

2. Press or button to adjust the timer time.

3. Press TON button again to confirm setting. ON is displayed and time displaying zone resumes to
display current time.

4. Press TON button again to cancel timer and ON is not displayed.

YMGI Group • 601 Arrow Ln, O’Fallon, MO 63366 • [e-mail] • ymgigroup.com • 866-833-3138

5

Your Modern Green Idea

M

I

N

I

S

P

L

I

T

S

•

V

G

N

I

T

H

G

I

L

D

E

L

R

•

F

R

•

A

P

L

T

A

O

S

C

•

YAP1F SPECIAL FUNCTIONS

1. Child Lock

Press and button simultaneously to lock the buttons on remote controller. When the remote is
locked the locked icon is displayed.
Press and button simultaneously again to unlock the buttons on remote controller. When the
remote is unlocked the locked icon is not displayed.

If the buttons are locked, the locked icon blinks 3 times when pressing any button and any operation
on the commands are invalid.

2. Changing Temperature Scale

In unit off status, press MODE button and button simultaneously to switch Temperature Scale between
°C and °F.

3. Setting Energy-Saving Function

In unit on status and under cool mode, press CLOCK and TEMP button simultaneously to enter
Energy-Saving mode.

1. When SE is displayed, Energy-Saving function is on.

2. When not displayed, Energy-Saving function is off.

If you want to turn off the Energy-Saving function, press CLOCK and TEMP button and SE is not
displayed.

Note:
energy-saving function is only available in cooling mode and it will be exited when switching mode
or setting sleep function.

4. Absence Function

In unit on status and under heat mode, press CLOCK and TEMP button simultaneously to enter absence
function. Temperature displaying zone displays 8 and is $ displayed.

Press CLOCK and TEMP button simultaneously again to exit Absence Function. Temperature display zone
resumes previous display and is not displayed.

In winter, absence function can keep the indoor ambient temperature above 0°C to avoid freezing

Note:

Absence function is only available in heating mode and it will be exited when switching mode or setting
sleep function.

6

YMGI Group • 601 Arrow Ln, O’Fallon, MO 63366 • [e-mail] • ymgigroup.com • 866-833-3138

REPLACING YAP1F REMOTE CONTROL BATTERIES

AND NOTES

1. Lift the cover along the direction of arrow (as shown in Fig 1).

Your Modern Green Idea

M

I

N

I

S

P

L

I

T

S

•

V

H

G

I

L

D

E

L

R

•

F

R

•

A

P

L

T

A

O

S

C

•

2. Take out the original batteries (as shown in Fig 1).

3. Place two 7# (AAA 1.5V) dry batteries, and make sure the position of “+” polar and “-” polar is correct (as
shown in Fig 2).

4. Reinstall the cover (as shown in Fig 2).

Fig.1 Fig.2

Notes:

1. The remote controller should be placed 1m away from the TV set or stereo sound sets.

G

N

I

T

2. The operation of remote controller should be performed within its receiving range.

3. If you need to control the main unit, please point the remote controller at the signal receiving window of
the main unit to improve the receiving sensibility of main unit.

4. When the remote controller is sending signal, “” icon will blink for 1 second. When the main unit receives
valid remote control signal, it will give out a sound.

5. If the remote controller does not operate normally, please take the batteries out and reinsert them after 30
seconds. If it still can’t operate properly, replace the batteries.

6. When replacing the batteries, do not use old or different types of batteries, otherwise, it may cause
malfunction.

7. When the remote controller will not be used for a prolonged period of time, please remove the batteries.

YMGI Group • 601 Arrow Ln, O’Fallon, MO 63366 • [e-mail] • ymgigroup.com • 866-833-3138

7

Product Series:

Control Options/Combinations

Remote Control

VRF

Indoor Units

EW EC EU EF-L EF-M/H FA UC

• • •

Wall Control

Bridge Control

Wall Control, & Remote Contol

Wall Control & Bridge Control

Wall Control, Bridge Control &
Thermostat

Wall Control & WiFi Control

Wall Control, WiFi Contol &
Smart Phone

Wall Control, Bridge Control,
Thermostat & Computerized
Group Control

Your Modern Green Idea

M

I

N

I

S

P

L

I

T

S

•

• • • • • • •

V

R

F

•

P

T

A

S

C

•

• • • • • •

• • • • • •

• • • • • •

• • • • • •

• • • • • •

• • • • • •

• • • • • •

G

N

I

T

H

G

I

L

D

E

L

•

R

A

L

O

YMGI is dedicated to designing, manufacturing and distributing the highest quality, energy saving and
environmentally friendly air conditioner and heat pump products, while providing the best service and
support to all of our customers. Our mission is to help build a sustainable, ecient and green world.

YMGI Symphony-Ductless & Ducted Heat Pump & Heat Recovery:

• SymphonySOLARDCInverter

(55) Multiple PV, (56) Single PV; (78) Multiple PH; (79) Single PH

• SymphonySOLODCInverter

(57)2,3-Single Zone 16 SEER, 09-24K Btu/h
(58)2-Single Zone 16-22 SEER, 09-36K Btu/h
(58)3-Single Zone 21 SEER, 09-36K Btu/h
(58)4-Single Zone 30 SEER, 09-18K Btu/h

• SymphonyCHOIRDCInverter

(59)2-DC Inverter Multiple Zone 16 SEER, 2x09K to 5x12K Btu/h
(59)4-DC Inverter Multiple Zone 21 SEER, 2x09K to 5x12K Btu/h
(59)2S-DC Inverter Multiple Zone 16 SEER 6x09K to 9x09K Btu/h

• SymphonyVRF-DCInverterHPorHeatRecoveryupto80Zones.

• SymphonyHARMONY-PackagedSelf-Contained

42”x16” PTAC/PTHP, 26” & 24” TTWA, and 37”x24” WMMP

• SymphonyCONDUCTOR
SideDischargeCondensingUnitSHCR
MiniCentralPackagedUnit VPAK

YMGIGroup

601 Arrow Ln, O’Fallon, MO 63366

www.ymgigroup.com

Tel: [phone] • Fax: [phone] • Email: [e-mail]

Unit appearance and specications are subject to change without notice.

YMGIHVAC&SolarSupply

601 Arrow Ln, O’Fallon, MO 63366

www.ymgihvacsupply.com

Copyright ©2017 YMGI Group